A pilot study on the feasibility of the preparation of a new certified reference material based on the Antarctic Scallop Adamussium Colbecki

As foreseen by the Italian National Programme of Research in Antarctica, a preliminary investigation was performed to ascertain the feasibility of the production of a new Certified Reference Material for trace elements based on the bivalve Adamussium colbecki. The scallops sampled in Antarctica during the 1999–2000 Italian scientific expedition were analyzed by inductively coupled plasma atomic emission spectrometry and high-resolution inductively coupled plasma mass spectrometry for their content in selected trace elements (As, Cd, Cr, Cu, Fe, Hg, Mn, Mo, Ni, V and Zn). The certification campaign will be undertaken on the basis of the findings of this feasibility study in close cooperation with the Institute for Reference Materials and Measurements, Joint Research Centre of the European Commission.     

A pilot study for the production of a certified reference material for trace elements in honey

In the context of the general mandate of the European Union Community Reference Laboratory (CRL) for residues in living animals and their products established at the Istituto Superiore di Sanità, a pilot study was undertaken to assess the possibility of producing a new certified reference material (CRM) for trace elements in a matrix of honey. The elements considered were As, Cd, Cr, Cu, Fe, Mn, Ni, Pb, Sn, V and Zn. Their determination was performed by inductively coupled plasma (ICP)-based techniques. Data obtained with different ICP techniques were generally in good agreement. In light of these results, the next step was the effective production of a candidate CRM in a honey matrix. In the preliminary phase, two different types of honey, i.e., Eucalyptus (solid and sticky) and Robinia (viscous and sticky), were pretreated at the Institute for Reference Materials and Measurements, Joint Research Centre, European Commission (EC-JRC-IRMM) in order to produce the materials candidate for the certification process. Approximately 600 ampoules were thus produced for the Robinia honey and 450 ampoules for the Eucalyptus honey, each ampoule containing 5 g of an aqueous solution of honey (with 20% and 30% high purity water, respectively) and sealed under inert gas (Ar). A ring test to determine the levels of the chemical elements and a long-term study to evaluate the stability of the samples is in progress. Tentative figures for the analytes of interest are (in ng g⁻¹): Robinia, As, 1.28±0.09; Cd, 0.59±0.08; Cr, 2.36±0.21; Cu, 57.6±3.2; Fe, 209±9; Mn, 90.8±3; Ni, 18.1±0.6; Pb, 23±1.5; Sn, 8.10±0.35; V, 1.19±0.37; and Zn, 178±4; Eucalyptus, As, 3.18±0.21; Cd, 0.70±0.08; Cr, 2.73±0.22; Cu, 141±6; Fe, 926±16; Mn, 1905±81; Ni, 7.77±0.4; Pb, 138±4; Sn, 7.97±0.16; V, 3.47±0.15; and Zn, 405±9.     

Trace elements in bovine muscle: an ongoing project for a new certified reference material

In the framework of the activities of the Community Reference Laboratory (CRL) for residues at the Istituto Superiore di Sanità (ISS) of Rome, a number of proficiency tests were performed in order to assess and improve, wherever necessary, the quality of regulatory residue analysis within the EU. In this context, a pilot study was undertaken with the purpose of ascertaining the feasibility of a project for the certification of a new reference material for trace elements in bovine muscle. On behalf of the ISS, approximately 70 kg of bovine muscle, collected at a slaughterhouse in Geel (Belgium), were freeze-dried, homogenized, stabilized and bottled under argon atmosphere by the Institute for Reference Materials and Measurements, Joint Research Centre, European Commission (IRMM-JRC-EC). Preliminary analyses were carried out with Quadrupole (Q) and High Resolution (HR) Inductively Coupled Plasma Mass Spectrometry (ICP-MS) to evaluate the content of As, Cd, Cu and Pb, whereas the Flow Injection Mercury System (FIMS) was used to quantify Hg. Digestion of the matrix was achieved by acid-assisted microwave irradiation. The mean values of experimentally obtained data were the following (in nanograms per gram): As, 24.2±1.2; Cd, 5.48±0.29; Cu, 4765±95; Hg, 3.37±0.73; and Pb, 184±7. Subsequently, 16 National Reference Laboratories (NRLs) for residues in the Member States plus the Norwegian one and eight Italian public laboratories were accepted to participate in the project and received one bottle of the freeze-dried bovine muscle. The laboratories were requested to perform three different analytical runs (in three different days), each consisting of three individual measurements. Preliminary results showed good agreement and fair evidence for homogeneity of the entire mass, thus setting the stage for the future certification of this candidate CRM.     

Microwave digestion-ICP-MS for elemental analysis in ambient airborne fine particulate matter: rare earth elements and validation using a filter borne fine particle certified reference material

NIST standard reference material SRM 2783 was employed to validate a high temperature, high pressure, two-stage microwave assisted acid digestion procedure using HNO₃, HF and H₃BO₃ developed for the analysis of trace elements (including rare earths) in atmospheric fine particulate matter (PM_2.5) prior to inductively coupled plasma mass spectrometry (ICP-MS). This method quantitatively solubilized Na, Mg, Al, K, Ti, V, Mn, Fe, Co, Ni, Cu, Zn, As, Se, Rb, Sb, Cd, Cs, Ba, Pb, Th, U and several rare earth elements (REEs) (La, Ce, Pr, Nd, Gd, Dy, Er, Sm and Eu) from SRM 1648 and SRM 2783. A small amount of HF in the first stage was required to dissolve silicates necessitating the corresponding addition of H₃BO₃ in second stage to dissolve fluoride precipitates of Mg, La, Ce and Th. The optimized microwave dissolution—ICP-MS method detected Na, Mg, Al, K, Ti, V, Mn, Fe, Co, Ni, Cu, Zn, As, Se, Rb, Sr, Cd, Mo, Sb, Cs, Ba, La, Ce, Pr, Nd, Sm, Gd, Pb, Th and U at trace to ultra-trace levels in ambient airborne fine particles from three sites in North Carolina. La to light lanthanide signature ratios suggested that soil and motor vehicles are the dominant REE sources in SRM 2783 and PM_2.5 samples collected during this study.     

A new certified reference material for the quality control of palladium, platinum and rhodium in road dust, BCR-723

Certified Reference Materials (CRMs) represent a key tool for the quality control of chemical analyses. The demand for environmental materials is constantly increasing in complex analytical fields, and the European Commission (EC) (through the Measurements & Testing Generic Activity) is responding to the urgent needs for materials requiring collaborative efforts at the international level. This paper describes the preparation of a new road-dust material (BCR-723), along with homogeneity and stability studies and the analytical work performed for the certification of the contents of palladium, platinum and rhodium, under the EC's PACEPAC project, PACEPAC being the acronym for “Production And CErtification of a road dust reference material for Platinum, palladium and rhodium used in Automotive Catalytic converters”.     

Colensolide A: a new nitrogenous bromophenol from the New Zealand marine red alga Osmundaria colensoi

A new nitrogenous bromophenol, colensolide A, is isolated from the New Zealand red alga Osmundaria colensoi together with the known bromophenol lanosol and four of its derivatives. In this study, a novel technique is employed to identify potentially new compounds in semi-purified mixtures containing a plethora of structurally similar, known metabolites, using NMR spectroscopy. The structure and relative configuration of colensolide A is determined using standard spectroscopic techniques. Several of the known bromophenols exhibit antibacterial activity and one shows moderate cytotoxicity.     

A study of trace element contamination in river sediments in Serbia using microwave-assisted aqua regia digestion and multivariate statistical analysis

The aim of this study was the evaluation of the trace element contamination level in sediments of the most important rivers in Serbia and their tributaries. The determination of the aqua regia soluble contents of 12 micro- and macro-elements (Ca, Cd, Co, Cr, Cu, Fe, Mn, Pb, Ni, Zn, Be and V) in sediments was developed by the microwave digestion technique combined with inductively coupled plasma atomic emission spectrometry. Correlation analysis and principal component analysis distinguishes factors of lithogenic and anthropogenic origins. The Fe, Mn, Be and V contents are controlled by a regional lithogenic high background factor, while Cd, Cr, Pb, Ni, Zn and Cu are recognized as tracer of pollution. For Co, mixed sources from both lithogenic and anthropogenic inputs were evidenced.The investigated sediment of the major rivers and their tributaries in Serbia showed high concentrations of metals, especially of Cd, Pb, Cu and Zn, which may cause serious environmental impacts. Rivers which flow into the Danube from its entrance into Serbia significantly influence the chemical load of the water and sediments.The experimental study was conducted using two BCR standard reference materials. The calculated accuracy and precision confirmed the good performance of the adopted procedures.     

In situ synthesis of copper nanoparticles and poly(o-toluidine): A metal-polymer composite material

We report here a novel in situ synthetic method for the preparation of poly(o-toluidine) and copper nanoparticle composite material. In this experiment, o-toluidine and cupric sulfate were used as the precursor; during the reaction o-toluidine was oxidized and forms poly(o-toluidine), while on the other hand cupric sulfate gets reduced and forms copper nanoparticle. IR, UV-vis and Raman spectra provide the information on the structure of the polymer. The TEM and SEM show the size of the nanoparticles and the morphology of the polymer, respectively.     

Ecotypic differences in responses of Arabidopsis thaliana L. to elevated polychromatic UV-A and UV-B+A radiation in the natural environment: a positive correlation between UV-B+A inhibition and growth rate

The effects of supplementary ultraviolet-A (UV-A) and ultraviolet-B+A (UV-B+A) in the natural environment on the growth and morphology of various ecotypes of Arabidopsis thaliana were investigated. The ecotypes investigated were Columbia (Col-4), Landsberg erecta (Ler-0), Cvi-0, Wassilewskija, Enkheim-D, Aa-0 and Di-1. The mutant hy-4 was also used. Results varied with the radiation treatment, ecotype and parameter measured. Plants subjected to elevated UV-A were both insensitive (all parameters Cvi-0 and Col-4) and sensitive. When responses to UV-A occurred they were mostly inhibitory (all significant responses of Di-1 and Enkheim-D, most parameters of Wassilewskija, and some parameters of hy-4), however, promotive affects were observed for some parameters of Aa-0 and Ler-0. Supplementary UV-B+A inhibited all parameters of Di-1 and Enkheim-D and most parameters of Col-4, Ler-0 and hy-4, but Wassilewskija, Aa-0 and Cvi-0 were mostly insensitive. The magnitude of the UV-B+A response varied with ecotype (compare Di-1 with Ler-0). Some ecotypes were sensitive to UV-A but not UV-B+A (Aa-0), whereas others (Ler-0, Col-4) show the opposite sensitivities. A linear relationship is reported between the degree of UV-B+A inhibition of each ecotype and growth rate. The higher the growth rate the more susceptible the ecotype is to UV-B+A inhibition. This relationship holds for the majority of growth parameters measured.     

A new 2212-type stair like structure: Bi14Sr21Fe12O61, m=5 member of the generic [Bi2Sr3Fe2O9]m[Bi4Sr6Fe2O16] family

A new oxide, Bi₁₄Sr₂₁Fe₁₂O_61, with a layered structure derived from the 2212 modulated type structure Bi₂Sr₃Fe₂O₉, was isolated. It crystallizes in the I2 space group, with the following parameters: a=16.58(3) Å, b=5.496(1) Å, c=35.27(2) Å and β=90.62°. The single crystal X-ray structure determination, coupled with electron microscopy, shows that this ferrite is the m=5 member of the [Bi₂Sr₃Fe₂O₉]_m[Bi₄Sr₆Fe₂O₁₆] collapsed family. This new collapsed structure can be described as slices of 2212 structure of five bismuth polyhedra thick along , shifted with respect to each other and interconnected by means of [Bi₄Sr₆Fe₂O₁₆] slices. The latter are the place of numerous defects like iron or strontium for bismuth substitution; they can be correlated to intergrowth defects with other members of the family.     

Synthesis and reactivity of new heterodinuclear iron/rhenium Cx complexes of the formula (η-C5Me5)Re(NO)(PPh3)(CC)n(η-dppe)Fe(η-C5Me5) (n = 3, 4): Redox properties and a dicobalt hexacarbonyl adduct

We report in this communication the synthesis and characterization of two Fe/Re heterodinuclear complexes 3_n of formula (η⁵-C₅Me₅)Re(NO)(PPh₃)(CC)_n(η²-dppe)Fe(η⁵-C₅Me₅) (n = 3, 4) as well as the hexacarbonyl dicobalt adduct (4) of the hexatriynediyl complex 3₃. We show by cyclic voltammetry that the “electronic communication” between the organometallic endgroups and thereby the thermodynamic stability of the corresponding mixed-valent (MV) parent 3_n⁺ is strongly influenced by bridge extension or by complexation of the [Co₂(CO)₆] fragment. In the case of the hexatriynediyl complex, the MV complex 3₃⁺ or 4 can be isolated by performing the chemical oxidation of 3₃ at low temperature. Spectroscopic studies of this compound and of other stable oxidized redox congeners should now help us to unravel how bridge extension modifies the electronic communication between the different redox-active endgroups in this family of unsymmetrically-substituted polyynediyl compounds.