Phosphorus-containing podands. 8. A study of metal-ligand interaction by fourier transform infrared spectroscopy in anhydrous acetonitrile

The interaction of phosphorus-containing monopodands with Li⁺, Na⁺, and K⁺ cations in anhydrous CH₃CN has been studied by FTIR spectroscopy. It has been shown that phosphoryl groups of the ligands take part in the formation of complexes with the alkali metal cation. The IR results obtained do not permit a clear conclusion as to whether or not the ether oxygen atoms of the ligand polyether chain participate in the complexation. It is suggested that in CH ₃ CN the formation of 1:1 complexes is not accompanied by conformational reorganization of the monopodand.Institute of Physiologically Active Substances, Russian Academy of Sciences, Chernogolovka 142432. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 4, pp. 884–889, April, 1992.     

Fourier transform raman spectroscopy using a bench-top fourier transform infrared spectrometer

The use of a bench top FTIR spectrometer for near infrared Fourier transform Raman spectroscopy is demonstrated. The use of near infrared excitation results in fluorescence free Raman spectra allowing previously difficult samples to be measured.     

Polarization fourier transform infrared spectroscopy

Some Fourier transform infrared spectroscopic studies with linearly and circularly polarized radiation are reported. They were all carried out by means of the differential technique, consisting in the comparison of two single-channel spectra of opposite polarization. Thus, linear dichroic or circular dichroic spectra with positive and negative bands were recorded. Typical application examples of both techniques are presented.     

涂石蜡大米傅立叶变换红外吸收光谱识别分析

针对11种未涂石蜡大米和18个涂不同量石蜡的大米样品,以石油醚提取的油脂为试样,采用傅立叶变换红外光谱仪,扫描样品的傅立叶变换红外吸收光谱,并对光谱进行预处理,提取红外特征信息,将2855与1746、1462与1163 cm-1处特征峰的面积比值为坐标,采用Origín 6.0软件作识别分类图.结果表明:特征峰的面积比值与所涂石蜡量成线性变化,大米油脂的特征峰面积比值在一定的区域分布,涂以0.05%以上石蜡的大米,其油脂特征峰面积比值与未涂石蜡米油脂的值有一定区别.     

Column switching applied to capillary gas chromatography/fourier transform infrared spectroscopy

A dual oven gas chromatograph incorporating a micro, mechanical switching valve has been interfaced to an FTIR spectrometer. With this system, each oven can be operated with independent temperature control. Complete choice of the columns' type and capacity gives flexibility in the separation prior to spectroscopic evaluation. An application which demonstrates some of the advantages of column switching in GC/FTIR is presented. Minor sample components have been successfully analyzed by heart-cutting the appropriate section of the separation from a high to a low capacity column. In this way, the dynamic range of the technique is effectively increased while an efficient chromatographic inlet to the FTIR is maintained.     

In-situ measurement of photochemical changes of solid samples by fourier transform infrared photoacoustic spectroscopy

Infrared spectral changes of lithographic printing plates were measuredin-situ by PAS and RAS. The advantages of PAS over RAS were discussed for the spectral measurements of organic coatings on roughened metal surface.     

Rapid discrimination of Eurycoma longifolia extracts by Fourier transform infrared spectroscopy and two dimensional correlation infrared spectroscopy

Eurycoma longifolia is a herbal medicinal plant of South-East Asian origin, popularly recognized as ‘Tongkat Ali’. The root extracts have been used in indigenous traditional medicines for its unique antimalarial, anti-pyretic, antiulcer, cytotoxic and aphrodisiac properties. It is an important task that fast and effective analysis methods monitor the inherent qualities of traditional herbal medicines and its corresponding extracts products as a complicated mixture system. Owing to the unique fingerprint character and extensive applicability to test sample, infrared spectral method have been used in many research fields. In this paper, we use FT-IR, second derivative infrared spectroscopy and two-dimensional correlation infrared spectroscopy (2D-IR) step by step to analyze E. longifolia and its different extracts (extracted by hexane, ethyl acetate, dichloromethane and methanol in turn). The findings indicated that FT-IR and 2D-IR can provide many holistic variation rules of chemical constituents. The structural information of the samples indicated that E. longifolia and its extracts contain a large amount of quassinoids, since some characteristic absorption peaks of quassinoids, such as ∼1700 cm⁻¹, ∼1670 cm⁻¹, ∼1600 cm⁻¹,∼1500 cm⁻¹, and ∼1270 cm⁻¹ can be detected. This method, having its high resolution and excellent macroscopic fingerprint features, can not only supply lots of structural information of main components in the complicated system, but also can differentiate the tiny differences between the similar systems according to the macro-fringerprint characters. This method is highly rapid, effective, accurate and well repetitive for pharmaceutical research.     

Near infrared fourier transform Raman spectroscopy of human artery

We report the first near IR FT-Raman spectroscopy of normal diseased human artery. In normal human aorta, two bands at 1669 cm⁻¹ and 1452 cm⁻¹ dominate the spectrum and can be assigned to protein amide I and C-H in-plane bending vibrations, respectively. Weaker bands are also observed between 1250 and 1350 cm⁻¹. Non-calcified atherosclerotic lesions with a large amount of necrotic debris below the tissue surface show a relative increase in the intensity of the 1452 cm⁻¹ band. In atherosclerotic aortas which contain calcified deposits several hundred microns below the tissue surface, a strong 961 cm⁻¹ band is observed due to the symmetric stretch of phosphate groups in the calcified salts. The results show that this method provides the capability to probe biological substituents several hundred microns below the tissue surface.     

Fourier transform infrared photoacoustic spectroscopy of dental calculus

The mid and far FTIR spectra of supragingival and subgingival calculus were measured, respectively. From the subtraction spectra of the two types of calculus, the protein components of calculus have been obtained. The results of photoacoustic spectroscopy indicated the presence of protein layer on the surface of early calculus.     

Mammalian cell growth studiedin situ by fourier transform infrared spectroscopy

Fourier transform infrared techniques were used to monitor mammalian cell growth plated on attenuated total reflection (ATR) crystals. Consistently, the growth kinetics plots generated from the obtained spectra demonstrated a sigmoidal curve representing a sequence of slow, rapid, then tapering cell growth which correlated well with non-spectral cell growth determinations. Significant advantages over traditional methods of measuring cell growth kinetics are demonstrated. The technique has promising potential to be used to study events in areas such as toxicology and cell biology.     

Polarization modulation Fourier transform infrared spectroscopy

Polarization modulation Fourier transform infrared spectroscopy can be measured by either double modulation FTIR or interferometric modulation FTIR techniques. The principles of both techniques are presented with examples of representative measurements. The relative advantages and disadvantages of each method are compared.     

The destruction-free analysis of polymers by fourier transform infrared photoacoustic and fourier transform Raman spectroscopy: A comparison

With the introduction of rapid–scanning Fourier transform infrared (FTIR) and recently Raman (FT–Raman) spectroscopy, vibrational spectroscopy has been launched into a new era of applications in polymer chemistry and physics. Thus, the increase in sensitivity provided by multiple scanning has led to the breakthrough of new, destruction–free sampling techniques, such as photoacoustic and Raman spectroscopy. This paper provides a comparison between data produced by FTIR photoacoustic and FT–Raman analysis of a range of polymers, and structural information available from both techniques is discussed.     

Polychlorobiphenyls differentiation and identification by gas chromatography/fourier transform infrared spectroscopy

Reference infrared vapour phase spectra of 20 polychlorobiphenyls (PCBs) have been obtained by gas chromatography/Fourier transform infrared spectroscopy (GC/FTIR). These spectra are consistent with those of PCB obtained by diffuse reflectance IR spectroscopy (DRIFT) and with those of more simple molecular structures (iodochlorobenzenes, 1-bromodichlorobenzenes). The IR frequencies of the GC/FTIR spectra of PCB are assigned in terms of substitution patterns. This work shows that GC/FTIR can be a good approach for differentiation and identification of PCB in complex mixtures.     

Combined thermogravimetry and fourier transform infrared spectroscopy techniques for gas evolution analysis

The usefulness of thermogravimetry has been amply demonstrated for a wide variety of material analysis applications. In many instances, however, additional information is required for adequate characterization of the sample and its thermal decomposition behaviour. In this respect, the analysis of evolved gases, or condensed liquids, has proven a highly useful approach. Among the various physical methods used for analysis of the thermal degradation products, infrared spectroscopy has often been found very powerful, being versatile, rapid and widely accessible. In this study, we report a simple new approach in which the evolved gases and condensed liquids from the thermal decomposition of various products are recuperated in an infrared gas cell and on a PVC membrane filter, respectively. The gaseous components were analysed by transmission FT-IR, and the condensed liquid products were examined directly on the PVC membrane by FT-IR in the internal reflexion mode. The technique was used, for example, to examine the pyrolysis products (gases and liquid) of Koberit, a proposed substitute for asbestos. The method was also applied to the study of chemically derivatized asbestos materials in an attempt to unravel the surface chemical modifications.     

Far infrared reflection spectra of layered semiconductors

Far infrared reflection and Raman spectra of InSe were measured at 5, 77 and 300 K. Phonon frequencies obtained by reflection spectra were well explained by two-point phonon combination. The crystal structure of-type was confirmed at low temperature. Ion blocking analysis supported also no change of phase by temperature in this semiconductor.     

Molecular orientation of rigid‐rod polyimide films characterized by polarized attenuated total reflection/fourier transform infrared spectroscopy

The variations in the molecular orientation of uniaxially drawn rigid‐rod polyimide films were systematically characterized in all three dimensions with polarized attenuated total reflection/Fourier transform infrared spectroscopy. The second‐order orientation coefficients were directly deduced from the anisotropy in IR absorptions of particular bands. With the draw ratio increasing, the state of the molecular orientation changed from being nearly planar to completely uniaxial via biaxial orientation, and the degree of orientation was much larger than that of a semirigid polyimide having an ether linkage at the same draw ratio, which originated from the rigid‐rod structure. In addition, the imide planes were rotationally oriented to the out‐of‐plane direction of the film geometry. Furthermore, the relationship between the molecular chain orientation and the in‐plane birefringence in the biaxial orientation state was examined. The intrinsic birefringence was estimated from biaxial orientation films to be 0.33 at a wavelength of 1307 nm. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 418–428, 2003     

Determination of sucrose by flow injection analysis with fourier transform infrared detection

A new methodology for the determination of sucrose in complex aqueous matrices by flow injection analysis with FTIR detection is presented. The methodology based on the enzymatic hydrolytic cleavage of sucrose by means of invertase to -D-glucose and -D-fructose. A special manifold consisting of two internally coupled injection valves being switched simultaneously is applied to facilitate recording FTIR spectra of the sample before and after the enzymatic reaction. The analytical readout is taken from the resulting difference spectrum obtained by subtracting the FTIR spectra of the sample before and after the reaction. The developed methodology uses a GC-IR software to continuously record the FTIR spectra of the effluent from the manifold. The proposed method gives linear results in the range of 10 to 100 mmol/l and has been successfully applied to the analysis of sucrose in synthetic mixtures as well as in real samples such as soft drinks.     

Dynamic Fourier transform infrared spectroscopy in polymer research

The rapid-scanning capability of FTIR instrumentation has revitalized the field of vibrational spectroscopy in polymer research and will be discussed with reference to the study of polyurethane kinetics, the temperature dependence of hydrogen bonding in polyamide 6 and strain-induced crystallization in a polydimethylsiloxane elastomer.