环化顺1,4丁二烯异戊二烯无规共聚物的表征

<正> 已知,聚异戊二烯或聚丁二烯等1,3-双烯聚合物可在路易斯酸催化剂作用下按阳离子型机理进行分子内环化反应,所得“环化橡胶”,做为可光敏固化的新材料,在光刻胶、光保护膜、胶粘剂等方面得到广泛应用。文献还表明,环化顺1,4聚双烯产物比环化其它结构的聚双烯产物具更好的使用性能。鉴于合成高分子材料中共聚物往往较均聚物呈现     

系列长链烷氧基苯甲醛的合成研究

以长链正烷基醇为原料与氢溴酸作用 ,合成了长链正烷基溴 6个 ;再与对或间羟基苯甲醛反应 ,合成了烷氧基苯甲醛 9个、间烷氧基苯甲醛 8个 .由于烷基链长的不同 ,其产率为 70 %～ 94% .考察了催化剂、烷基链长、羟基位置对长链烷氧基甲醛合成的影响 .解析了各种产物的红外光谱 .     

几种β-烷基萘的催化脱氢环化的研究

在铬铝催化剂上,温度400—500℃和空速0.1—0.87时~(-1)的反应条件下,研究了β-正庚萘、β-(2-甲基丁基)萘、β-(1-丙基丁基)萘和β-(1-丁基丁基)萘的脱氢环化。β-烷基萘的烷基侧链结构对脱氢环化反应有明显的影响。β-(2-甲基丁基)萘的脱氢环化同β-(3-甲基丁基)萘比较类似,生成30％的2-甲基蒽;但同β-(1-甲基丁基)萘较少类似,仅生成约5％的菲。当β-烷基萘的烷基侧链碳原子多于6个时,不仅在烷基侧链与萘环碳原子之间可以脱氢环化,生戍菲、蒽及其同系物,而且在烷基侧链碳原子之间也可以脱氢环化生成苯井芴和(?)等稠环芳烃,在β-烷基萘脱氢环化的同时,还伴随有裂解反应;烷基侧链愈长,裂解现象就越严重。     

氢醌对3,4-聚异戊二烯-2,6-双(4′-叠氮苄叉)环己酮体系的光交联反应的影响

关于聚二烯烃-双叠氮型感光性高分子的光交联反应机理,目前有Hepher的自由基机理和的非自由基机理之争。为了对该体系的光交联反应有更加本质的了解,我们对含氢醌的该感光性高分子进行光照,在对反应产物的分析中发现有苯醌和2,6-双(4′-氨基苄叉)环己酮存在,证明氢醌对活性双氮烯有猝灭作用。     

氢醌对3,4-聚异戊二烯-2,6-双(4’-叠氮苄叉)环己酮体系的光交联反应的影响

关于聚二烯烃-双叠氮型感光性高分子的光交联反应机理,目前有Hepher的自由基机理和的非自由基机理之争。为了对该体系的光交联反应有更加本质的了解,我们对含氢醌的该感光性高分子进行光照,在对反应产物的分析中发现有苯醌和2,6-双(4’-氨基苄叉)环己酮存在,证明氢醌对活性双氮烯有猝灭作用。通过对光交     

反应型二烷基脲凝胶剂及有机溶剂的室温凝胶化研究

通常制备有机分子凝胶是在高温下溶解凝胶剂,凝胶剂分子在冷却过程中进行自组装并使有机溶剂凝胶化。该方法限制了某些低沸点溶剂的凝胶化。利用甲苯二异氰酸酯与烷基胺的高反应活性,制备了三种不同烷基链长的反应型凝胶剂甲苯–2, 4–二（N, N’ –烷基）脲。这种反应型凝胶剂能以较低的浓度在室温下使某些芳香族和卤代烃溶剂中形成热可逆的有机分子凝胶。不同烷基链长的亲溶剂作用以及溶剂性质对有机分子凝胶的形成有较大影响。场发射扫描电镜表明这种反应型凝胶剂在有机溶剂中自组装形成纤维状三维网络结构。烷基链长度不同,形成的纤维状聚集体的形态也不同。红外光谱（FT-IR）和核磁共振波谱（1H-NMR）研究表明分子间氢键作用是这种凝胶剂自组装的驱动力。通过X射线衍射（XRD）和分子模拟推测了其聚集体的结构形态。     

反应型二烷基脲凝胶剂及有机溶剂的室温凝胶化研究

通常制备有机分子凝胶是在高温下溶解凝胶剂,凝胶剂分子在冷却过程中进行自组装并使有机溶剂凝胶化。该方法限制了某些低沸点溶剂的凝胶化。利用甲苯二异氰酸酯与烷基胺的高反应活性,制备了三种不同烷基链长的反应型凝胶剂甲苯–2, 4–二（N, N’ –烷基）脲。这种反应型凝胶剂能以较低的浓度在室温下使某些芳香族和卤代烃溶剂中形成热可逆的有机分子凝胶。不同烷基链长的亲溶剂作用以及溶剂性质对有机分子凝胶的形成有较大影响。场发射扫描电镜表明这种反应型凝胶剂在有机溶剂中自组装形成纤维状三维网络结构。烷基链长度不同,形成的纤维状聚集体的形态也不同。红外光谱（FT-IR）和核磁共振波谱（1H-NMR）研究表明分子间氢键作用是这种凝胶剂自组装的驱动力。通过X射线衍射（XRD）和分子模拟推测了其聚集体的结构形态。     

AB_g型超支化聚合反应中的环化效应

研究了ABg型超支化聚合反应中的环化效应,给出高分子代数生长的微分动力学方程,并通过环化反应的内在特征确定了环化反应与分子间反应的速率常数.进而利用Monte Carlo模拟方法得到了树状高分子和含环高分子的数量、环的尺寸分布以及高分子数均和重均分子量等,讨论了环化效应对聚合体系平均特征的影响.结果表明,环化效应取决于单体体积分数、溶剂效应和官能度之间的协同作用,其中单体的体积分数在环化反应中起着主导作用,而溶剂效应和官能度之间则相互竞争.     

高聚物的化学結构和稳定性的关系

高聚物降解的化学过程将使分子引起如下几类的反应:(1) 断鏈作用;(2) 交联作用;(3) 改变高分子鏈的化学結构;(4) 改变侧基;(5) 以上这些反应的結合。对一給定的物质而言,改变环境条件随时会改变这些反应的相对程度。在絕大部分的降解过程中,自由基是一个活泼的中间产物。反应結果将使高聚物由于交联、环化或再度聚合而变硬,或由于断鏈和解聚而变軟或变粘。这些相伴的交联和断鏈作用的相对     

离子液体对β-糖苷酶催化合成红景天苷的影响(英文)

研究了混合溶剂体系中阴离子分别为BF4-,PF6-,Cl-,Br-和I的14种离子液体对来源于黑布林糖苷酶催化合成红景天苷反应的影响.结果表明,在最佳反应条件下,β-糖苷酶的反应初速度和红景天苷的产率分别为3.3mmol/(L·h)和24.5%.离子液体咪唑阳离子的烷基链长(C2~C10)对β-糖苷酶的活性影响较大,当烷基链长为C6时,糖苷酶表现出较高的催化活性.     

烷基苯磺酸作用下环化聚异戊二烯-双叠氮型感光性高分子光交联产物的降解反应

<正> 环化聚异戊二烯-双叠氮型感光性高分子是一类应用广泛的负性光致抗蚀剂。关于它的光交联反应机理,许多人曾进行过研究,但是当这种具有三维网络结构的光交联聚合物完成其抗蚀使命后,怎样把它干净、彻底地从被涂表面去掉,是微细加工中急待解决的问题。常用的溶剂浸泡、高温加氧灼烧和等离子氧去胶法都存在着这样或那样的问题     

A STUDY ON THE DEGRADATION MECHANISM OF PHOTOCROSSLINKING PRODUCTS FORMED BY CYCLIZED POLYISOPRENE-DIAZIDE SYSTEM UNDER THE INFLUENCE OF ALKYL BENZENE SULFONIC ACIDS

The degradation mechanism of photocrosslinking products formed by cyclized polyisoprene-diazide system under the influence of the different alkyl benzene sulfonic acids was studied. The effects of alkyl chain length and the concentration of alkyl benzene sulfonic acids on the rate of degradation reaction were discussed. It was found that in the initial stage of degradation, the cyclicity ratio and the average fused ring number did not change considerably, but the percentage of uncyclized parts content varied significantly. The suitable mechanism was supposed.     

Alkylation of phenol: a mechanistic view

The current work utilizes the ab initio density functional theory (DFT) to develop a molecular level of the mechanistic understanding on the phenol alkylation in the presence of a cation-exchange resin catalyst, Amberlyst-15. The catalyst is modeled with the benzene sulfonic acid, and the effect of this acid on olefins such as isopropene (i-Pr) and tributene (t-Bu) in a phenol solution mimics the experimental condition. A neutral-pathway mechanism is established to account for early-stage high concentration of the phenolic ether observed in experiments. The mechanism involves an exothermic reaction between olefin and the benzene sulfonic acid to form ester followed by three reaction pathways leading to direct O-alkylation, o-C-alkylation, and p-C-alkylation. Our calculations conclude that O-alkylation to form the phenolic ether is the most energetically favorable in the neutral condition. An ionic rearrangement mechanism describes intramolecular migrations of the alkyl group from the phenolic ether to form C-alkylphenols, while the positively charged protonation significantly lowers transition barriers for these migrations. The ionic rearrangement mechanism accounts for high yields of o-C-alkylphenol and p-C-alkylphenol. Competition between the H atom and the alkyl R group at the substitutive site of the protonated ortho configuration is found to be the determining factor to the ortho/para ratio of C-alkylation products.     

Organo-sulfonic acid catalyzed degradation kinetics and thermodynamic studies of nylon-6 by hydrothermal method

Nylon-6 as an engineering polymer and its starting monomer are both costly. Chemical reutilization offers some economic and environmental benefits. Depolymerization of nylon-6 was carried out by the conventional technique of hydrothermal method using various organo-sulfonic acids such as Methane sulfonic acid (MSA), para-toluene sulfonic acid (p-TSA), benzene sulfonic acid (BSA), and tetra-butyl ammonium bromide (TBAB) as a phase transfer catalyst. Various parameters such as temperature, time, normality of acids, and phase transfer catalyst concentration were varied to optimize its parameters, and characterization techniques such as amine value titrations and Fourier transform infrared spectroscopy were used for quantitative measurements. Solid-state ¹³C NMR was done for structure confirmation. A chemical kinetics interpretation shows degradation mechanism follows first-order kinetics under various catalysts. MSA has the highest reaction rate of 8.49 × 10^?2 h^?1 at 90°C; it decreases to 7.72 × 10^?2 h^?1 at 100°C. At the same time, aromatic Sulfonic acids such as p-TSA and BSA have a higher reaction rate of 8.995 × 10^?2 h^?1 and 5.582 × 10^?2 h^?1, respectively. The activation energy was lowered as the acidity of organo-sulfonic acids increased as benzene sulfonic acid has the lowest E_a. Followed by p-TSA, and MSA has the highest E_a. Free energy shows a similar kind of value. A simple theoretical model was used to calculate the activation energy. Thermodynamic parameters such as heat of enthalpy and entropy of reaction were evaluated using the Eryig–Polanyi equation. The combined catalytic effect of organo-sulfonic acids and phase-transfer catalyst provides a better environment-friendly method for depolymerizing nylon-6.     

A novel approach for the synthesis of alkyl and aryl sulfonamides

A novel approach for the synthesis of alkyl and aryl sulfonamides by the reaction of sulfonic acids, isocyanides and water in dichloromethane is reported at ambient temperature in excellent yields within 20 min. To the best of our knowledge this is the first report on the synthesis of this biologically important family using easily available sulfonic acids and isocyanides.     

Estimation of the dissociation constants for functional groups on modified and unmodified silica gel supports from the relationship between electroosmotic flow velocity and pH

Electroosmotic volume flow was directly observed in a simple instrument consisting of 1 cm long a home-made support, packed between two polyethylene frits in the polypropylene tube. Equations relating electroosmotic flow (EOF) velocity and pH for two functional groups on the surface of the solid materials were developed. With these equations, we can estimate the dissociation constants of two different kinds of functional groups on modified silica gel materials simultaneously. The dissociation constants of silanol groups, benzene sulfonic acid groups, and alkyl quaternary ammonium groups on the modified and unmodified silica gel supports were estimated. The estimated pK values of the silanol groups on the silica gel and modified silica gel surfaces are between 4.0 and 4.3. The estimated pK values of the benzene sulfonic acid groups and alkyl quaternary ammonium groups on the surface of the modified silica gel are 2.6 and 8.6, respectively.     

取代基结构-活性关系对电化学降解取代苯胺的影响

以Na2SO4为支持电解质, 使用Ti/PbO2电极, 研究了带有推电子基(—CH3)和吸电子基(—NO2, —Cl)的邻或对位取代基苯胺类化合物的电催化氧化降解过程. 研究结果表明, 带有取代基苯胺类化合物的氧化降解是在羟基自由基进攻下生成氨基酚类化合物, 然后在电极表面失去电子生成苯醌继续氧化的过程. 带有推电子基团苯胺的电催化降解速度比带有吸电子基团的苯胺降解速度快, 这是因为推电子基团使苯环电子云密度提高, 有利于羟基自由基的进攻; 吸电子基团使苯环电子云密度降低, 不利于羟基自由基的进攻. 由于阴极还原反应的作用, 化学反应活性和电化学反应活性并不完全一致. 氯代苯胺在羟基自由基进攻下—Cl离去, 以Cl-离子形式进入溶液中, 被氧化生成有效氯, 加快降解反应速度. 硝基虽然是强吸电子基, 但是可以转化为对苯二胺, 进一步活化苯环, 其降解速度较快.     

以强酸性阳离子交换树脂为催化剂合成14-氧杂二环[10,3,0]十五碳烯-2

以三种类型的强酸性阳离子交换树脂(聚苯乙烯磺酸树脂、酚醛磺酸树脂和全氟磺酸树脂)为催化剂进行环十二碳-烯的普林斯反应,合成了14-氧杂二环[10,3,0]十五碳烯-2.考察了该三种树脂的催化性能,并与苯磺酸和对甲苯磺酸的催化性能作了比较.考察了孔径、粒度及反应条件(温度、时间、催化剂用量等)对聚苯乙烯磺酸树脂催化性能的影响.实验结果表明:全氟磺酸树脂和交联大孔聚苯乙烯磺酸树脂(交联度10％,孔径3.9×10²Å,比表面积20m²/g)具有良好的催化性能.     

Mechanochemical degradation of aromatic sulfonic acids

Sulfonic acids and sulfonates are widely used as surfactants in various industrial processes. Although partial biodegradation occurs, their release in the environment has determined a widespread pollution problem due to their remarkable tendency towards accumulation. For this reason, various methodologies to effectively degrade sulfonic acids and sulfonates in real matrices are currently under investigation. In this study, we focused our attention on the mechanochemical degradation of the 1,5-naphthalene disulfonic acid using strongly reducing agents such as pure Mg and Ca metals. The mechanochemical processing induced either a gradual degradation of the organic compound or a combustion-like reaction depending upon the experimental conditions. A partial degradation of the sulfonic acid was observed as a result of gradual reactions. An almost complete removal of the pollutant was instead observed after combustion-like reactions.     

SULFONATION OF 9-ALKYLANTHRACENES

Abstract

The reaction of anthracene, 9-phenylanthracene and some 9-alkylanthracenes with dioxan-SO₃ has been studied. Anthracene yields the 1-, 2- and 9-sulfonic acid in a ratio of 24 : 6 : 70. 9-Phenyl- and 9-neopentyl-anthracene both yield a mixture of the 4- and 10-sulfonic acids in a ratio of 33 : 67 and 15 : 85 respectively. Unexpectedly, 9-methylanthracene yields, in a more rapid reaction, exclusively 9-anthrylmethanesulfonic acid (1, R[dbnd]H) 9-Alkylanthracenes of which the alkyl group contains at least one α-H yield as main product (s) the α-sulfonic acids 1 and/or (depending on the further structure of the alkyl group) the sulfonic acids 2–4.