Kinetics of the multichannel reaction of methanethiyl radical (CH3S*) with 3O2

The CH3S* + O2 reaction system is considered an important process in atmospheric chemistry and in combustion as a pathway for the exothermic conversion of methane-thiyl radical, CH3S*. Several density functional and ab initio computational methods are used in this study to determine thermochemical parameters, reaction paths, and kinetic barriers in the CH3S* + O2 reaction system. The data are also used to evaluate feasibility of the DFT methods for higher molecular weight oxy-sulfur hydrocarbons, where sulfur presents added complexity from its many valence states. The methods include: B3LYP/6-311++G(d,p), B3LYP/6-311++G(3df,2p), CCSD(T)/6-311G(d,p)//MP2/6-31G(d,p), B3P86/6-311G(2d,2p)//B3P86/6-31G(d), B3PW91/6-311++G(3df,2p), G3MP2, and CBS-QB3. The well depth for the CH3S* + 3O2 reaction to the syn-CH3SOO* adduct is found to be 9.7 kcal/mol. Low barrier exit channels from the syn-CH3SOO* adduct include: CH2S + HO2, (TS6, E(a) is 12.5 kcal/mol), CH3 + SO2 via CH3SO2 (TS2', E(a) is 17.8) and CH3SO + O (TS17, E(a) is 24.7) where the activation energy is relative to the syn-CH3SOO* stabilized adduct. The transition state (TS5) for formation of the CH3SOO adduct from CH3S* + O2 and the reverse dissociation of CH3SOO to CH3S* + O2 is relatively tight compared to typical association and simple bond dissociation reactions; this is a result of the very weak interaction. Reverse reaction is the dominant dissociation path due to enthalpy and entropy considerations. The rate constants from the chemical activation reaction and from the stabilized adduct to these products are estimated as functions of temperature and pressure. Our forward rate constant and CH3S loss profile are in agreement with the experiments under similar conditions. Of the methods above, the G3MP2 and CBS-QB3 composite methods are recommended for thermochemical determinations on these carbon-sulfur-oxygen systems, when they are feasible.     

Mechanisms of reaction of aminoxyl (nitroxide), iminoxyl, and imidoxyl radicals with alkenes and evidence that in the presence of lead tetraacetate, N-hydroxyphthalimide reacts with alkenes by both radical and nonradical mechanisms

1,2-dideuterio-cyclohexene, 1,2-dideuterio-cyclooctene, and trans-3,4-dideuterio-hex-3-ene were reacted with three >NO* radicals: 4-hydroxyTempo, di-tert-butyliminoxyl, both used as the actual radicals, and phthalimide-N-oxyl (PINO) generated from N-hydroxyphthalimide (NHPI) by its reaction with tert-alkoxyl radicals (t-RO*) and with lead tetraacetate. In all cases, except the NHPI/Pb(OAc)4 system, only mono >NO-substituted alkenes were produced. The 2H NMR spectra imply that 88-92% of monoadducts were formed by the initial abstraction of an allylic H-atom, followed by capture of the allylic radical by a second >NO*, while the remaining 12-8% appear to be formed by an initial addition of >NO* to the double bond followed by H-atom abstraction by a second >NO*. A substantial and sometimes the major product formed with the NHPI/Pb(OAc)4 system has two PINO moieties added across the double bond. Since such diadducts are not formed with the NHPI/t-RO* system, a heterolytic mechanism is proposed, analogous to that known for the Pb(OAc)4-induced acetoxylation of alkenes. A detailed analysis of the NHPI/Pb(OAc)4/alkene products indicates that monosubstitution occurs by both homolytic and heterolytic processes.     

The ene reactions of nitroso compounds involve polarized diradical intermediates

The ene reactions of nitroso compounds were studied with B3LYP/6-31G* geometry optimizations and energy calculations, along with single point energy evaluations using CASPT2/6-31G** and UCCSD(T)/6-311+G* methods. Reactions of HNO with propene and of MeNO and p-NO2C6H4NO with propene or substituted alkenes were also studied. The reaction mechanism is stepwise and involves a polarized diradical intermediate. The electronic structure of this intermediate is between that of a closed shell polar species and that of a pure diradical, and it is stabilized by polar solvents. A weak C-N bonding interaction combined with a CH-O hydrogen bond leads to heightened barriers to rotation about formally single bonds compared to conventional diradicals. Consequently, rotation is slower than hydrogen abstraction and cyclization to form an aziridine N-oxide. This aziridine N-oxide does not lead to ene products without subsequent ring opening but provides a mechanism for the RNO moiety to translate from one end of the alkene to the other. B3LYP calculations are also able to reproduce kinetic isotope effects and regioselectivity.     

Reactions of hydroxyl radicals with alkenes in low-temperature matrices

The reactions of hydroxyl radicals with a number of stable alkenes have been studied in low-temperature matrices. The reactions were initiated by broad band UV-visible irradiation of matrices containing H2O2, and the alkene under investigation. The hydroxyalkyl radical products were identified principally by comparison of their spectra with the spectra of corresponding stable alcohols. Accordingly, IR spectra were recorded for the following series of alcohols isolated in argon matrices--methanol, ethanol, ethanol-d6, propan-1-ol, propan-2-ol, butan-2-ol, 2-methylpropan-1-ol (iso-butyl alcohol), 2-methylpropan-2-ol (tert-butyl alcohol), 2-methylbutan-2-ol (tert-amyl alcohol), 3-methylbutan-2-ol and 2,3-dimethylbutan-2-ol. The hydroxyalkyl radicals, which appear to be formed from the alkenes studied were as follows--from ethene, 2-hydroxyethyl radical: from cis- or trans-but-2-ene. 1-methyl-2-hydroxypropyl radical; from propene, 1-methyl-2-hydroxyethyl and 2-hydroxypropyl radicals; from but-1-ene. 1-hydroxymethylpropyl and 2-hydroxybutyl radicals; from 2-methylpropene (iso-butene), 1,1-dimethyl-2-hydroxyethyl and 2-methyl-2-hydroxypropyl radicals; the radical products from buta-1,3-diene and isoprene could not be identified. In the cases, where two radical products were possible, i.e. when propene, but-1-ene or 2-methylpropene were the substrates, it was found that the concentration of the secondary or tertiary radical always exceeded that of the primary radical. However, the relative concentration of these radicals appears to be determined by subsequent photolysis to give carbonyl compounds. There seems, therefore, to be little preference for the secondary and tertiary radicals over the primary radicals in the primary addition process. Comments on the mechanism of the transformation from radical to carbonyl compound based upon identification of intermediates within the matrix and isotopic substitution experiments are made. The characterisation of the 2-hydroxyethyl radical has been backed up by experiments utilising isotopic substitution with 13C and D (2H). The other radicals have been identified with varying degrees of certainty. Those radicals, which are observed at the highest concentration and which are, therefore, characterised more certainly are--2-hydroxyethyl (1), from ethene: 1-methyl-2-hydroxypropyl (2), from cis- and trans-but-2-ene; 1-methyl-2-hydroxyethyl (3), from propene; 1-hydroxymethylpropyl (5), from but-1-ene; and 1,1- dimethyl-2-hydroxyethyl (8), from 2-methylpropene.     

Quantum chemical and master equation simulations of the oxidation and isomerization of vinoxy radicals

The vinoxy radical, a common intermediate in gas-phase alkene ozonolysis, reacts with O2 to form a chemically activated alpha-oxoperoxy species. We report CBS-QB3 energetics for O2 addition to the parent (*CH2CHO, 1a), 1-methylvinoxy (*CH2COCH3, 1b), and 2-methylvinoxy (CH3*CHCHO, 1c) radicals. CBS-QB3 predictions for peroxy radical formation agree with experimental data, while the G2 method systematically overestimates peroxy radical stability. RRKM/master equation simulations based on CBS-QB3 data are used to estimate the competition between prompt isomerization and thermalization for the peroxy radicals derived from 1a, 1b, and 1c. The lowest energy isomerization pathway for radicals 4a and 4c (derived from 1a and 1c, respectively) is a 1,4-shift of the acyl hydrogen requiring 19-20 kcal/mol. The resulting hydroperoxyacyl radical decomposes quantitatively to form *OH. The lowest energy isomerization pathway for radical 4b (derived from 1b) is a 1,5-shift of a methyl hydrogen requiring 26 kcal/mol. About 25% of 4a, but only approximately 5% of 4c, isomerizes promptly at 1 atm pressure. Isomerization of 4b is negligible at all pressures studied.     

A combined density functional theory and coupled cluster method investigation of the structural properties and stabilities of radical CH(2)CP and its isomers

The doublet potential energy surface of radical system [C(2), H(2), P] is investigated at the UB3LYP/6-311++G(d,p) and UCCSD(T)/6-311++G(2df,2p) (single-point) levels. Eight chainlike and three-membered ring structures are located as energy minima connected by 10 interconversion transition states. At the final UCCSD(T)/6-311++G(2df,2p)//UB3LYP/6-311++G(d,p) level with zero-point vibrational energy correction, species CH(2)CP is found to be thermodynamically the most stable isomer followed by HCCPH, H-cCPC-H, cPCC-H(H), H-cCCP-H, cis-CC(H)PH, trans-CC(H)PH, and CCPH(2) at 11.01, 12.57, 40.07, 43.63, 50.25, 56.82, and 65.36 kcal/mol, respectively. The computed results indicate that the chainlike isomers CH(2)CP and HCCPH and cyclic radical H-cCPC-H possess considerable kinetic stability at extra low pressures and temperatures. Interestingly, radical CCPH(2), whose energy is the highest in all predicted CH(2)CP isomers, can be also regarded as a kinetically stable species with the smallest isomerization barrier of 22.26 kcal/mol at extra low pressures and temperatures. Therefore, considering higher kinetic stability, in addition to the microwave spectroscopy characterized isomer CH(2)CP in previous experiments, the species HCCPH, H-cCPC-H, and CCPH(2) should be considered as excellent candidates for possible experimental observation. Furthermore, the structural nature of stable radical isomers is discussed based on bonding characteristics, single electron spin distribution, and comparison with their analogues.     

Activation of alkenes and H2 by [Fe]-H2ase model complexes

The established ability of the Fe(II) bridging hydride species (micro-H)(micro-pdt)[Fe(CO)2(PMe3)]2+, 1-H+, to take-up and heterolytically activate dihydrogen, resulting in H/D scrambling of H2/D2 and H2/D2O mixtures (Zhao et al. Inorg. Chem. 2002, 41, 3917) has prompted a study of simultaneous alkene/H2 activation by such [Fe]H2ase model complexes. That the required photolysis produced an open site was substantiated by substitution of CO in 1-H+ by CH3CN with formation of structurally characterized [(micro-H)(micro-pdt)[Fe(CO)2(PMe3)][Fe(CO)(CH3CN)(PMe3)]]+[PF6]-. Under similar photolytic conditions, H/D exchange reactions between D2 and terminal alkenes (ethylene, propene and 1-butene), but not bulkier alkenes such as 2-butene or cyclohexene, were catalyzed by 1-H+ and the edt (SCH2CH2S) analogue, 2-H+. Substantial regioselectivity for H/D exchange at the internal vinylic hydrogen was observed. The extent to which the olefins were deuterium enriched vs deuterated was catalyst dependent. The stabilizing effect of the binuclear chelating ligands, SCH2CH2CH2S, pdt, and SCH2CH2S, edt, is required for the activity of binuclear catalysts, as the mono-dentate micro-SEt analogue decomposed to inactive products under the photolytic conditions of the catalysis. Reactions of 1 and 2 with EtOSO2CF3 yielded the S-alkylated products, [(micro-SCH2CH2CH2SEt)[Fe(CO)2(PMe3)]2]+[SO3CF3]- (1-Et+), and 2-Et+, rather than micro-C2H5 analogues to the micro-H of 1-H+. The stability and lack of reactivity toward H2 of 1-Et+ and 2-Et+, indicates they are not on the reaction path of the olefin/D2 H/D exchange process. A mechanism with olefin binding to an open site created by CO loss and formation of an Fe-(CH2CHDR) intermediate is indicated. A likely role of a binuclear chelate effect is implicated for the unique S-XXX-S cofactor in the active site of [Fe]H2ase.     

醚溶液中烯烃硼氢化反应机理的理论模拟

在B₃LYP/6-31G^*水平上以二甲醚(Me₂O)模拟四氢呋喃(THF)对烯烃在THF溶液中硼氢化反应的机理进行了研究.计算结果发现,烯烃通过类似SN₂的交换过程从醚与BH₃构成的配合物获得BH₃结合成π配合物中间体,这一交换是整个硼氢化反应的决速步骤.     

Structural dependence of thermodynamics of alkene binding to yttrium alkyl complexes and of kinetics of alkyl migration to coordinated alkenes

Agostic interactions in yttrium alkyls are structure dependent. Primary alkyl yttrium complexes have beta-CH(2) agostic interactions at low temperature, but a shift toward alpha-agostic interactions occurs on warming. For the more crowded beta-disubstituted yttrium alkyls, an alpha-CH(2) agostic interaction is seen. The thermodynamics of alkene binding to the primary alkyl yttrium complex Cp(2)YCH(2)CH(2)CH(CH(3))(2) (2) depend strongly on the structure of the alkene. A single allylic substituent on the alkene has a small effect on alkene binding, but a second allylic substituent has a large destabilizing effect. Propene binding to yttrium alkyls is largely independent of the nature of the alkyl ligand. Equilibrium constants for propene binding to n-, gamma-substituted, beta-substituted, and secondary alkyl yttrium complexes are similar. The rate of migration of an alkyl group to a coordinated alkene depends strongly on the structure of the alkyl group: n-alkyl approximately gamma-substituted > beta-substituted > alpha-substituted. The approximately 200-fold slower insertion of propene into Cp(2)YCH(2)CH(CH(3))(2) (6) than that into Cp(2)YCH(2)CH(2)CH(CH(3))(2) (2) is therefore due to kinetically slow migration of the beta-disubstituted alkyl group of 6 and not to differences in the equilibrium binding of propene. Processes related to chain transfer and site epimerization at the metal center are also reported.     

Hydrogen transfer between sulfuric acid and hydroxyl radical in the gas phase: competition among hydrogen atom transfer, proton-coupled electron-transfer, and double proton transfer

In an attempt to assess the potential role of the hydroxyl radical in the atmospheric degradation of sulfuric acid, the hydrogen transfer between H2SO4 and HO* in the gas phase has been investigated by means of DFT and quantum-mechanical electronic-structure calculations, as well as classical transition state theory computations. The first step of the H2SO4 + HO* reaction is the barrierless formation of a prereactive hydrogen-bonded complex (Cr1) lying 8.1 kcal mol(-1) below the sum of the (298 K) enthalpies of the reactants. After forming Cr1, a single hydrogen transfer from H2SO4 to HO* and a degenerate double hydrogen-exchange between H2SO4 and HO* may occur. The single hydrogen transfer, yielding HSO4* and H2O, can take place through three different transition structures, the two lowest energy ones (TS1 and TS2) corresponding to a proton-coupled electron-transfer mechanism, whereas the higher energy one (TS3) is associated with a hydrogen atom transfer mechanism. The double hydrogen-exchange, affording products identical to reactants, takes place through a transition structure (TS4) involving a double proton-transfer mechanism and is predicted to be the dominant pathway. A rate constant of 1.50 x 10(-14) cm(3) molecule(-1) s(-1) at 298 K is obtained for the overall reaction H2SO4 + HO*. The single hydrogen transfer through TS1, TS2, and TS3 contributes to the overall rate constant at 298 K with a 43.4%. It is concluded that the single hydrogen transfer from H2SO4 to HO* yielding HSO4* and H2O might well be a significant sink for gaseous sulfuric acid in the atmosphere.     

H atom attack on propene

The reaction of propene (CH(3)CH═CH(2)) with hydrogen atoms has been investigated in a heated single-pulsed shock tube at temperatures between 902 and 1200 K and pressures of 1.5-3.4 bar. Stable products from H atom addition and H abstraction have been identified and quantified by gas chromatography/flame ionization/mass spectrometry. The reaction for the H addition channel involving methyl displacement from propene has been determined relative to methyl displacement from 1,3,5-trimethylbenzene (135TMB), leading to a reaction rate, k(H + propene) → H(2)C═CH(2) + CH(3)) = 4.8 × 10(13) exp(-2081/T) cm(3)/(mol s). The rate constant for the abstraction of the allylic hydrogen atom is determined to be k(H + propene → CH(2)CH═CH(2) + H(2)) = 6.4 × 10(13) exp(-4168/T) cm(3)/(mol s). The reaction of H + propene has also been directly studied relative to the reaction of H + propyne, and the relationship is found to be log[k(H + propyne → acetylene + CH(3))/k(H + propene → ethylene + CH(3))] = (-0.461 ± 0.041)(1000/T) + (0.44 ± 0.04). The results showed that the rate constant for the methyl displacement reaction with propene is a factor of 1.05 ± 0.1 larger than that for propyne near 1000 K. The present results are compared with relevant earlier data on related compounds.     

FORMATION AND CHEMILUMINESCENT DECOMPOSITION OF DIOXETANES IN THE GAS PHASE

Abstract— High resolution chemiluminescence spectra have been obtained of the singlet electronically excited products of O₂(¹Δ) plus alkene, dioxetane forming, reactions. The experiments were conducted in a flow apparatus at pressures of 1–5 torr. The spectra are a measure of the unrelaxed initial distribution of energy in the excited product. Results are reported for ethylene, 1, 1-difluoroethylene. methyl vinyl ether, ethyl vinyl ether, n -butyl vinyl ether, ketene, ketene-d₂, allene, unsymdimethyl allene, dimethyl ketene, 2-methoxy propene, 1-ethoxy propene, 2-bromo propene, and N, N- dimethyl isobutenyl amine. Chemiluminescence activation energies, representing the cycloaddition process, and absolute quantum yields for singlet excited product, ranging from 10^--⁴ to 2.5 × 10^--². are reported for 10 alkenes. Several of the reactions, 1,1-difluoroethylene, ketene, ethylene and allene give formaldehyde ¹ nπ* product with excess vibrational-rotational energy and a higher quantum yield than reactions not displaying this phenomenon. This is an indication of at least partially statistical partitioning of the energy in excess of that needed to electronically excite the formaldehyde. The experiments with ketene and ketene-d₂ provide the first evidence for the existence of unsubstituted 1,2-dioxetanone. The results from several of the experiments, particularly those with 2-methoxy propene and I-ethoxy propene are consistent with the mechanism of Goddard, which predicts regioselective and stereoselective attack of O₂(¹Δ) upon alkoxy substituted alkenes having allylic hydrogen.     

Formic acid catalyzed hydrolysis of SO3 in the gas phase: a barrierless mechanism for sulfuric acid production of potential atmospheric importance

Computational studies at the B3LYP/6-311++G(3df,3pd) and MP2/6-311++G(3df,3pd) levels are performed to explore the changes in reaction barrier height for the gas phase hydrolysis of SO(3) to form H(2)SO(4) in the presence of a single formic acid (FA) molecule. For comparison, we have also performed calculations for the reference reaction involving water assisted hydrolysis of SO(3) at the same level. Our results show that the FA assisted hydrolysis of SO(3) to form H(2)SO(4) is effectively a barrierless process. The barrier heights for the isomerization of the SO(3)···H(2)O···FA prereactive collision complex, which is the rate limiting step in the FA assisted hydrolysis, are found to be respectively 0.59 and 0.08 kcal/mol at the B3LYP/6-311++G(3df,3pd) and MP2/6-311++G(3df,3pd) levels. This is substantially lower than the ~7 kcal/mol barrier for the corresponding step in the hydrolysis of SO(3) by two water molecules--which is currently the accepted mechanism for atmospheric sulfuric acid production. Simple kinetic analysis of the relative rates suggests that the reduction in barrier height facilitated by FA, combined with the greater stability of the prereactive SO(3)···H(2)O···FA collision complex compared to SO(3)···H(2)O···H(2)O and the rather plentiful atmospheric abundance of FA, makes the formic acid mediated hydrolysis reaction a potentially important pathway for atmospheric sulfuric acid production.     

Cis-trans isomerization of chemically activated 1-methylallyl radical and fate of the resulting 2-buten-1-peroxy radical

The cis-trans isomerization of chemically activated 1-methylallyl is investigated using RRKM/Master Equation methods for a range of pressures and temperatures. This system is a prototype for a large range of allylic radicals formed from highly exothermic (～35 kcal/mol) OH + alkene reactions. Energies, vibrational frequencies, anharmonic constants, and the torsional potential of the methyl group are computed with density functional theory for both isomers and the transition state connecting them. Chemically activated radicals are found to undergo rapid cis-trans isomerization leading to stabilization of significant amounts of both isomers. In addition, the thermal rate constant for trans → cis isomerization of 1-methylallyl is computed to be high enough to dominate reaction with O(2) in 10 atm of air at 700 K, so models of the chemistry of the (more abundant and more commonly studied) trans-alkenes may need to be modified to include the cis isomers of the corresponding allylic radicals. Addition of molecular oxygen to 1-methylallyl radical can form 2-butene-1-peroxy radical (CH(3)CH═CHCH(2)OO(?)), and quantum chemistry is used to thoroughly explore the possible unimolecular reactions of the cis and trans isomers of this radical. The cis isomer of the 2-butene-1-peroxy radical has the lowest barrier (via 1,6 H-shift) to further reaction, but this barrier appears to be too high to compete with loss of O(2).     

Isomerization and decomposition reactions in the pyrolysis of branched hydrocarbons: 4-methyl-1-pentyl radical

The kinetics of the decomposition of 4-methyl-1-pentyl radicals have been studied from 927-1068 K at pressures of 1.78-2.44 bar using a single pulse shock tube with product analysis. The reactant radicals were formed from the thermal C-I bond fission of 1-iodo-4-methylpentane, and a radical inhibitor was used to prevent interference from bimolecular reactions. 4-Methyl-1-pentyl radicals undergo competing decomposition and isomerization reactions via beta-bond scission and 1, x-hydrogen migrations (x = 4, 5), respectively, to form short-chain radicals and alkenes. Major alkene products, in decreasing order of concentration, were propene, ethene, isobutene, and 1-pentene. The observed products are used to validate a RRKM/master equation (ME) chemical kinetics model of the pyrolysis. The presence of the branched methyl moiety has a significant impact on the observed reaction rates relative to analogous reaction rates in straight-chain radical systems. Systems that result in the formation of substituted radical or alkene products are found to be faster than reactions that form primary radical and alkene species. Pressure-dependent reaction rate constants from the RRKM/ME analysis are provided for all four H-transfer isomers at 500-1900 K and 0.1-1000 bar pressure for all of the decomposition and isomerization reactions in this system.     

Structural and conformational properties and intramolecular hydrogen bonding of (methylenecyclopropyl)methanol, as studied by microwave spectroscopy and quantum chemical calculations

The microwave spectra of (methylenecyclopropyl)methanol (H(2)C=C(3)H(3)CH(2)OH) and one deuterated species (H(2)C=C(3)H(3)CH(2)OD) have been investigated in the 20-80 GHz spectral range. Accurate spectral measurements have been performed in the 40-80 GHz spectral interval. The spectra of two rotameric forms, denoted conformer I and conformer IX, have been assigned. Both these rotamers are stabilized by intramolecular hydrogen bonds formed between the hydrogen atom of the hydroxyl group and the pseudo-pi electrons on the outside of the cyclopropyl ring, the so-called "banana bonds". The carbon-carbon bond lengths in the ring are rather different. The bonds adjacent to the methylene group (H(2)C=) are approximately 7 pm shorter that the carbon-carbon bond opposite to this group. It is found from relative intensity measurements of microwave transitions that conformer IX, in which the hydrogen bond is formed with the banana bonds of the long carbon-carbon bond, is 0.4(3) kJ/mol more stable than conformer I, where the hydrogen bond is formed with the pseudo-pi electrons belonging to the shortest carbon-carbon bond of the ring. The microwave study has been augmented by quantum chemical calculations at the MP2/6-311++G, G3 and B3LYP/6-311++G levels of theory.     

自由基-分子反应:F+Propene(CH2CHCH3)的从头算研究

The radical-molecule reaction F+propene (CH2CHCH3) was studied in detail by using the Becke's three parameter Lee-Yang-Parr-B3LYP/6-311G(d,p) and coupled cluster with single, double, and triple excitationsCCSD(T)/6-311+G(2d,2p). It is shown that F+propene reaction mainly occurs through complex-formation mechanism: F attacks the double bond of propene leading to the formation of complex 1 and complex 2. As the two radical complexes are metastable, they can quickly dissociate to H+C3H5F, CH3+C2H3F and HF+C3H5. Based on the ab initio calculations, the CH3+C2H3F is the main channel, and the H elimination and HF forming channels also provide some contribution to products. The calculated values are in good agreement with the recently reported experimental results.     

Carbocationic rearrangement of pivaloyl cation and protonated pivalaldehyde in superacid medium: A novel solution equivalent of the McLafferty rearrangement

Both pivaloyl cation in the presence of hydride donors and protonated pivalaldehyde in superacid media (both aprotic and protic) rearrange to protonated methyl isopropyl ketone involving gitionic dicationic intermediates. In our earlier studies we have found that the rearrangement of pivaladehyde to methyl isopropyl ketone occurs quantitatively in the presence of various superacidic media such as anhydrous HF, triflic acid, boron trifluoride-2,2,2-trifluoroethanol complex (BF(3).2CF(3)CH(2)OH) etc. Our present study with environmentally more benign and stable amine:HF complexes, namely pyridinium poly(hydrogen fluoride) (PPHF) (5), poly(4-vinylpyridinium) poly(hydrogen fluoride) (6), and poly(ethyleniminium) poly(hydrogen fluoride) (PEIHF) (7) shows that these modified HF equivalents can carry sufficient amount of immobilized HF and provide ample acidity for complete isomerization of pivalaldehyde to methyl isopropyl ketone. Calculations on protioformyl, acetyl and pivaloyl dications at the B3LYP/6-311 ++ G(d,p) and CCSD(T)/6-311 ++ G(d,p)//B3LYP/6-311 ++ G(d,p) levels have been performed to compare the nature of protosolvation of formyl, acetyl, pivaloyl cations and protonated pivaladehyde in superacid media. These studies further suggest protosolvation of protonated pivalaldehyde leading to gitionic dications at high acidities resulting in the carbocatioinic rearrangement. The reported carbocationic rearrangement under superacidic activation represents a novel solution chemistry equivalent of the well known gas-phase McLafferty rearrangement.     

Neutral cumulene oxide CCCCO is accessible by one-electron oxidation of [CCCCO]-* in the gas phase

Calculations at the CCSD(T)/aug-cc-pVDZ//B3LYP/6-31G* level of theory indicate that doublet [CCCCO]-* is a stable species which should undergo collision-induced Franck-Condon vertical oxidation under neutralisation-reionisation conditions (-NR+) to produce both triplet CCCCO (ground state) and singlet CCCCO. Some of the neutral CCCCO species formed (particularly the triplet) should be stable for the microsecond duration of the NR experiment, whereas others will be energised (particularly the singlet) and should decompose to C3 and CO. The [CCCCO]-* radical anion has been formed in the ion source of the mass spectrometer by the reaction CH3OCH2C[triple bond]C-CO-CH(CH3)2 + O-* --> [CCCCO]-* + CH3O* + H2O + (CH3)2CH*. The -NR+ spectrum of [CCCCO]-* shows a recovery signal at m/z 64 corresponding to ionised CCCCO, together with a pronounced peak at m/z 36 (CCC+*) produced by ionisation of CCC (formed by the reaction CCCCO --> CCC + CO). The experimental observations are in agreement with the predictions of the theoretical study.     

自由基HO2与C2H2反应势能面的理论研究

应用量子化学从头计算和密度泛函理论(DFT)对HO2+C2H2反应体系的反应机理进行了研究.在B3LYP/6-311G**和CCSD(T)/6-311G**水平上计算了HO2+ C2H2反应的二重态反应势能面.计算结果表明,主要反应方式为自由基HO2的H原子和C2H2分子中的C原子结合,经过一系列异构化,最后分解得到主要产物P1 (CH2O+ HCO).此反应是放热反应,化学反应热为-321.99 kJ·mol-1.次要产物为P2 (CO2 +CH3),也是放热反应.