Density functional study for the polymerization of ethylene monomer using a new nickel catalyst

The present computational study was designed to study the polymerization of ethylene catalyzed by a new Ni‐based PymNox organometallic compound. Recently, we have synthesized and tested the behavior of this type of catalyst in olefin polymerization. It has been experimentally observed that the unsubstituted catalyst Ni2 (aldimino PymNox catalyst ) is less active than the methyl substituted Ni1 (acetaldimino PymNox catalyst ) analogue. The reactivity of both catalysts was examined using density functional theory (DFT) models. Our results indicate that the methyl substituted Ni1 introduces some additional steric hindrance that probably renders a more suitable catalyst conformation for the monomer incorporation. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1160–1165, 2010     

Synthesis and radical polymerization of a vinyl monomer having a sulfonylacylurea moiety and hydrolysis of the obtained polymer

The radical polymerization of N-acryloyl-N′-(p-tolylsulfonyl)urea ( 2 ), prepared easily by the reaction of p-toluenesulfonyl isocyanate with acrylamide, was carried out in DMF, DMSO, or NMP at 60°C by use of AIBN as an initiator to give a polymer 3 in a good yield. Copolymerization parameters of 2 were evaluated by the copolymerization with MMA. Polymer 3 was readily hydrolyzed in an aqueous NaOH solution (1M) at room temperature to give poly(acrylic acid). The reason for the higher activity for hydrolysis of 3 compared to an ordinary amide is discussed. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1515–1519, 1998     

A degradable atom transfer radical polymerization inimer: Synthesis,polymerization, and cleavage of the resulting polymer products

A novel degradable inimer for atom transfer radical polymerization (ATRP), 2‐(6‐(2‐((2‐bromo‐2‐methylpropanoyl)oxy)ethyl)pyridin‐2‐yl)ethyl methacrylate (PyDEBrMΑ), was synthesized by the two‐step esterification of 2,6‐pyridinediethanol, first with α‐bromoisobutyryl bromide in order to introduce the initiator moiety, and then with methacryloyl chloride in order to introduce the monomer moiety. PyDEBrMA was subsequently used to initiate the self‐condensing ATRP of methyl methacrylate (MMA) to obtain a hyperbranched MMA homopolymer which could be cleaved at the PyDEBrMA residue either by treatment under mildly alkaline hydrolysis conditions (sodium deuteroxide in d₆‐DMSO at room temperature) or thermolysis at 150 °C. The lability of the PyDEBrMA residue arises from the presence in its structure of two 2‐(pyridin‐2‐yl)ethyl ester moieties. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2831–2839     

Product of ditoluenetitanium(0) oxidation with oxygen as a new catalyst for ethylene polymerization

The reaction of ditoluenetitanium(0) with oxygen affords an intermediate oxidation product: a titanium(II) complex that catalyzes ethylene polymerization. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 2043–2045, October, 2007.     

Hybrid atom transfer radical polymerization system for balanced polymerization rate and polymer molecular weight control

A hybrid polymerization system that combines the fast reaction kinetics of conventional free radical polymerization and the control of molecular weight and distribution afforded by ATRP has been developed. High‐free radical initiator concentrations in the range of 0.1–0.2 M were used in combination with a low concentration of ATRP catalyst. Conversions higher than 90% were achieved with ATRP catalyst concentrations of less than 20 ppm within 2 h for the hybrid ATRP system as compared with ATRPs where achieving such conversions would take up to 24 h. These reaction conditions lead to living polymerizations where polymer molecular weight increases linearly with monomer conversion. As in living polymerization and despite the fast rates and low ATRP catalyst concentrations, the polydispersity of the produced polymer remained below 1.30. Chain extension experiments from a synthesized macroinitiator were successful, which demonstrate the living characteristics of the hybrid ATRP process. Catalyst concentrations as low as 16 ppm were found to effectively mediate the growth of over 100 polymer chains per catalytic center, whereas at the same time negating the need for post polymerization purification given the low‐catalyst concentration. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2294–2301, 2010     

High pressure radical polymerization of ethylene with nitrogen

The radical polymerization of ethylene has been performed in the presence of nitrogen. The structural characteristics of polymers prepared with 0–25 weight % of nitrogen at 1,200 atm were determined by usual solution methods (viscometry, GPC) and by infrared spectroscopy. The experimental results show that, when the demixing in two phases appears, long chain branching decreases and unsaturation increases.     

Two‐dimensional polymer synthesis through the topochemical polymerization of alkylenediammonium muconate as a multifunctional monomer

Here we demonstrate a unique two‐dimensional polymer synthesis through topochemical polymerization via polymer crystal engineering, which is useful for controlling and designing the polymerization reactivity as well as the polymer chain and crystal structures. We have succeeded in the synthesis of a sheet polymer through the polymerization of alkylenediammonium (Z,Z)‐muconate as a multifunctional 1,3‐diene monomer in the crystalline state under the irradiation of UV and γ‐rays or upon heating in the dark. The photopolymerization reactivity of several muconates and the structural control of the obtained polymer are described. The stereochemical structure of the polymer and the polymerization mechanism are discussed on the basis of the results of IR and NMR spectroscopy, thermogravimetric measurements, and solid‐state hydrolysis for the transformation into poly(muconic acid). © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3922–3929, 2004     

Playing construction with the monomer toy box for the synthesis of multi-stimuli responsive copolymers by reversible deactivation radical polymerization protocols

In this review article, we survey the 2016–June 2021 scientific literature on the synthesis of multi-stimuli responsive (MSR) polymers, the main focus being on reversible deactivation radical polymerization techniques (RDRPs, also known as controlled radical polymerizations). In fact, along more than 40 years of extensive research, RDRPs have boosted the synthesis of stimuli-responsive polymers. RDRPs are now robust, versatile, relatively user-friendly and even interconvertible, thus allowing control over composition, sequence, and topology of polymers. Such control can afford materials with well-defined responses to physical, chemical, and biological external stimuli. Furthermore, “click” reactions are used to combine macromolecular precursors or to introduce specific functional groups in the target structure. As a result, MSR polymers are obtained from diverse combinations of commercial or specially synthesized building blocks arranged at will into desired sequences and architectures. Thanks to this versatility, self-assembling polymeric structures are designed either to respond to triggers and perform specific applicative tasks, or to investigate the influence of structural variables on the responsivity of polymers. The “green” trend emerging in the field of responsive polymers and RDRPs is also briefly discussed.     

High pressure radical polymerization of ethylene with water dilution

The radical polymerization of ethylene has been performed in the presence of water. The structural characteristics of polymers prepared with 0-60% wt of water at 1400 atm and various temperatures (140–260°) were determined by the usual solution methods (viscometry, GPC), by density and by infrared spectroscopy. The experimental results show that, when water content increases, long chain branching (LCB) increases and molecular weight distribution broadens.     

Enzymatic polymerization: A new method of polymer synthesis

Enzymatic polymerization denotes an in vitro polymerization via nonbiosynthetic pathways catalyzed by an isolated enzyme. This article describes the recent progress of this polymerization technique, developed mainly during this decade. The polymerization utilizes enzymes of hydrolases and oxidoreductases as catalysts. This new method of polymer synthesis provided natural polysaccharides like cellulose, amylose, xylan, and chitin, and unnatural polysaccharides catalyzed by a glycosidase from well-designed monomers, various functionalized polyesters catalyzed by lipase from a variety of monomers, and polyaromatics materials catalyzed by an oxidoreductase and an enzyme model complex from phenols and anilines. An oxidoreductase also initiated vinyl polymerizations. Characteristic features of enzymatic polymerizations are discussed, including the importance of the combination of substrate monomer and enzyme. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3041–3056, 1999     

Synthesis of a new zirconium catalyst for ethylene polymerization

A novel complex dichlorobis(2‐ethyl‐3‐hydroxy‐4‐pyrone)zirconium(IV) (ZrCl₂(ethylpyrone)₂) was synthesized. Complexation of the pyrone ligand to the zirconium was confirmed by UV, ¹H and ¹³C‐NMR, and electrochemical studies. NMR showed the presence of four isomers and density functional theory calculations indicated that the main isomer had a cis configuration. The catalyst was shown to be active in ethylene polymerization in the presence of the cocatalyst methylaluminoxane. The highest catalyst activity for the zirconium complex was achieved at Al/Zr = 2500, 70 °C and when a small concentration of catalyst was used (1 μmol). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3830–3841, 2008     

Branched polymer via free radical polymerization of chain transfer monomer: A theoretical and experimental investigation

A simple mathematic model for the free radical polymerization of chain transfer monomers containing both polymerizable vinyl groups and telogen groups was proposed. The molecular architecture of the obtained polymer can be prognosticated according to the developed model, which was validated experimentally by homopolymerization of 4‐vinyl benzyl thiol (VBT) and its copolymerization with styrene. The chain transfer constant (C_T) of telogen group in a chain transfer monomer is considered to play an important role to determine the architecture of obtained polymer according to the proposed model, either in homopolymerization or copolymerization. A highly branched polymer will be formed when the C_T value is around unity, while a linear polymer with a certain extent of side chains will be obtained when the C_T value is much bigger or smaller than unity. The C_T of VBT was determined to be around 15 by using the developed model and ¹H NMR monitored experiments. The obtained poly(VBT) and its copolymers were substantiated to be mainly consisted of linear main chain with side branching chains, which is in agreement with the anticipation from the developed model. The glass transition temperature, number average molecular weight, and its distribution of those obtained polymer were primarily investigated. This model is hopefully to be used as a strategy to select appropriate chain transfer monomers for preparing hyperbranched polymers. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1449–1459, 2008     

Oxidative coupling polymerization of bishydrazide for the synthesis of poly(diacylhydrazine): Oxidative preparation of oxidatively degradable polymer

The oxidative coupling polymerization of bishydrazide is successfully performed to form poly(diacylhydrazine) (PDAH), which is an oxidatively degradable polymer. Oxone is an effective oxidant, and a mixture of an aprotic polar solvent, water, and acetonitrile or N,N‐dimethylacetamide is necessary as the solvent. On treatment of PDAH with sodium hypochlorite solution or hydrogen peroxide, the PDAH is rapidly oxidized and degraded to the corresponding dicarboxylic acid. When hydrogen peroxide is used as the oxidant, the addition of acetonitrile and potassium carbonate is necessary for effective degradation. PDAH exhibits high thermal stability in air and a high T_g value. No oxidation is observed in air. Thus, PDAH is an oxidatively degradable high‐performance polymer that is stable toward oxygen. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Template atom transfer radical polymerization of a diaminopyrimidine‐derivatized monomer in the presence of a uracil‐containing polymer

Uracil‐derivatized monomer 6‐undecyl‐1‐(4‐vinylbenzyl)uracil and diaminopyrimidine‐derivatized monomer 2,6‐dioctanoylamido‐4‐methacryloyloxypyrimidine (DMP) were synthesized and polymerized by atom transfer radical polymerization (ATRP). A well‐defined, highly soluble, uracil‐containing polymer, poly[6‐undecyl‐1‐(4‐vinylbenzyl)uracil] (PUVU), was prepared in dioxane at 90 °C with CuBr/1,1,4,7,10,10‐hexamethyltriethylenetetramine as the catalyst and methyl α‐bromophenylacetate as the initiator. PUVU was further used as a template for the ATRP of DMP. The enhanced apparent rate constant of the DMP polymerization in the presence of PUVU indicated that the ATRP of DMP occurred along the PUVU template. The template polymerization produced a stable and insoluble macromolecular complex, PUVU/poly(2,6‐dioctanoylamido‐4‐methacryloyloxypyrimidine). An X‐ray diffraction study confirmed that the complex had strandlike domains. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6607–6615, 2006     

Parallel synthesis and biophysical characterization of a degradable polymer library for gene delivery

We recently reported the parallel synthesis of 140 degradable poly(beta-amino esters) via the conjugate addition of 20 primary or secondary amine monomers to seven different diacrylate monomers. To explore possible structure/function relationships and further characterize this class of materials, we investigated the ability of each DNA-complexing polymer to overcome important cellular barriers to gene transfer. The majority of vectors were found to be uptake-limited, but complexes formed from polymers B14 and G5 displayed high levels of internalization relative to "naked" DNA (18x and 32x, respectively). Effective diameter and zeta potential measurements indicated that, in general, small particle size and positive surface charge led to higher internalization rates. Of the 10 DNA/polymer complexes with the highest uptake levels, all had effective diameters less than 250 nm and nine had positive zeta potentials. Lysosomal trafficking was investigated by measuring the pH environment of delivered DNA. Complexes prepared with polymers G5, G10, A13, B13, A14, and B14 were found to have near neutral pH measurements, suggesting that they were able to successfully avoid trafficking to acidic lysosomes. This work highlights the value of parallel synthesis and screening approaches for the discovery of new polymers for gene delivery and the elucidation of structure/function relationships for this important class of materials.     

Symmetrical polymer systems prepared using a degradable bifunctional atom transfer radical polymerization initiator: Synthesis,characterization, and cleavage

Linear (co)polymers and dimethacrylate‐end‐linked polymer networks of methyl methacrylate with 2‐(dimethylamino)ethyl methacrylate, cleavable in the middle of the polymer chain, either under thermolysis or alkaline hydrolysis conditions, were prepared via atom transfer radical polymerization (ATRP) using a specially designed bifunctional degradable initiator. This initiator was 2,6‐pyridinediethanol di(2‐bromo‐2‐methyl propanoate) (PyDEDBrMeP), bearing two 2‐(pyridin‐2‐yl)ethyl ester moieties, known for their thermal and hydrolytic (alkaline conditions) lability. As a control, a more stable bifunctional ATRP initiator, 2,6‐pyridinedimethanol di(2‐bromo‐2‐methyl propanoate) (PyDMDBrMeP), was also synthesized together with the corresponding linear polymers and polymer networks prepared from it. Thermal or hydrolytic treatment of the polymers prepared using PyDEDBrMeP led to a reduction in the molecular weights of the linear polymers by a factor of two, and to the conversion of the polymer networks to soluble branched (star) structures, consistent with the expected cleavage of the initiator residue located in the middle of the polymer chain. Thermal treatment of the polymers prepared using PyDMDBrMeP did not affect their molecular weight due to the thermal stability of the (pyridin‐2‐yl)methyl ester group, while treatment under alkaline hydrolysis conditions resulted in complete cleavage, similar to the PyDEDBrMeP‐prepared polymers. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2342–2355