Gas chromatographic retention of 180 polybrominated diphenyl ethers and prediction of relative retention under various operational conditions

The gas chromatographic (GC) retention times of 180 polybrominated diphenyl ethers (PBDEs) were obtained under different operational conditions on two types of commonly used capillary columns, Restek Rtx-1614 and J&W DB-5MS, of different dimensions. The relative retention times (RRTs) for PBDEs were calculated by normalizing the retention times of individual congeners to the sum of those of BDEs 47 and 183. In clear contrast to polychlorinated biphenyls (PCBs), the elution of PBDEs has few cross-homolog overlaps, and this observation is discussed in terms of molecular conformation with regard to co-planarity. Within a homolog, ortho substitution in PBDEs tends to decrease GC retention, and such an effect is stronger for higher homologs. With the RRT database established in this work, a simple approach is evaluated for the identification of all mono to hepta PBDEs from the RRTs of 39 congeners under various GC conditions to facilitate the identification of unknown PBDE peaks for which chemical standards are not available.     

甲氧基多溴联苯醚色谱相对保留时间的QSRR研究

基于有机化合物定量结构与色谱相对保留时间的关系,对26个甲氧基多溴联苯醚化合物进行了B3LYP/6-31G*水平上的结构优化,并在优化结构基础上进行了分子连接性指数和量子化学结构参数的提取。应用SPSS统计软件对甲氧基多溴联苯醚化合物的色谱相对保留时间与分子连接性指数进行了多元线性回归(MLR)。结果表明,三阶类分子连接性指数可以很好地表达甲氧基多溴联苯醚化合物色谱相对保留时间与结构描述符之间的定量关系。用外部测试集的方法对模型预测能力进行了验证,结果表明:所建立的QSRR模型具有较强的稳健性和预测能力。     

Predicting gas chromatographic retention times of 209 polybrominated diphenyls (PBBs) for different temperature programs

A method has been developed to predict the retention times of 209 individual polybrominated diphenyl congeners for different temperature programs. The retention equations lnk=A+B/T of five PBBs in gas chromatography (GC) were used to evaluate the properties of the regression coefficients A and B, which are widely accepted as being highly reliable chromatographic retentions. The quantitative relationships between the A and B values of PCBs and those of PBBs were found. The regression equations derived have coefficients of determination greater than 0.999. The A, B values of any PBB can be predicted by using the A, B values of the PCB according to these relationships. Using these predicted A and B values, the retention times of all PBBs can be predicted. This is an important advance in the identification of PBBs because at present there are only a few PBB standards available.     

Gas chromatography and mass spectrometry of methoxylated polybrominated diphenyl ethers (MeO-PBDEs)

Twenty-six methoxylated polybrominated diphenyl ethers (MeO-PBDEs) were characterized by gas chromatography (GC) on four different GC columns with different lengths and polarities, as well as by mass spectrometry using three ionization techniques, electron ionization (EI), electron capture negative ionization (ECNI) and positive ion chemical ionization (PICI). MeO-PBDE congeners with similar retention times on a nonpolar GC column were separated when analyzed on a polar GC column. EI can be used to determine the position of the methoxy substituent (ortho, meta or para) relative to the diphenyl ether oxygen in the MeO-PBDEs. The PICI ionization technique is shown to be valuable to generate structural information of the MeO-PBDEs, i.e. the degree of bromination on both the methoxy-substituted ring and the entirely brominated phenyl ring can be obtained. This structure information can also be achieved for certain MeO-PBDEs with the methoxy group in ortho position to the diphenyl ether bond in ECNI mode. Like other brominated compounds ECNI is preferable when analyzing environmental samples for quantification of MeO-PBDEs because of the formation of bromide ions, which enables low detection limits.     

Comprehensive two-dimensional gas chromatography of polybrominated diphenyl ethers

Comprehensive two-dimensional gas chromatography with micro electron-capture detection (GCxGC-muECD) was evaluated for the separation of 125 polybrominated diphenyl ethers (PBDEs). From among the six column combinations that were evaluated, DB-1x007-65HT was found to be the most suitable because of: (i) the highest number of BDE congeners separated; (ii) the least decomposition of higher brominated congeners; and (iii) the most suitable maximum operating temperature. The separation of the 125 BDE congeners from five hydroxy- and two methoxy-BDEs and nine other brominated flame retardants (polybrominated biphenyls, tetrabromobisphenol-A, methyl-tetrabromobisphenol-A and hexabromocyclododecane) was also studied. Fluorinated BDEs were found to be valuable internal standards for the determination of BDEs because of their very similar physico-chemical properties and excellent separation from the parent BDEs, mainly in the second dimension. GCxGC-time-of-flight MS and GCxGC-muECD were shown to be useful tools to identify decomposition products of nona- and deca-substituted BDEs, which are formed during the GC run. Three nona-BDEs were shown to be the major decomposition products of BDE 209.     

Synthesis of polybrominated diphenyl ethers of marine origin

Polybrominated diphenyl ethers — antimicrobial metabolites of the marine spongeDysidea fragilis — have been obtained by the reaction of 2,3,5-tribromonitrobenzene with 3,5-dibromo-2-methoxyphenol and the reaction of brominated diphenyliodonium salts with brominated phenols.Pacific Ocean Institute of Bioorganic Chemistry, Far Eastern Branch, Russian Academy of Sciences, Vladivostok. Translated from Khimiya Prirodnykh Soedinenii, No. 3, pp. 352–354, May–June, 1993.     

Synthesis of polybrominated diphenyl ethers of marine origin

Polybrominated diphenyl ethers — antimicrobial metabolites of the marine spongeDysidea fragilis — have been obtained by the reaction of 2,3,5-tribromonitrobenzene with 3,5-dibromo-2-methoxyphenol and the reaction of brominated diphenyliodonium salts with brominated phenols. Pacific Ocean Institute of Bioorganic Chemistry, Far Eastern Branch, Russian Academy of Sciences, Vladivostok. Translated from Khimiya Prirodnykh Soedinenii, No. 3, pp. 352–354, May–June, 1993.     

Human exposure to polybrominated diphenyl ethers through the diet

Polybrominated diphenyl ethers (PBDEs), a class of brominated flame retardants, are used in a variety of consumer products being produced in notable quantities. PBDEs have been detected in environmental samples. In recent years, a marked increase in the levels of PBDEs in human biological tissues and fluids, especially breast milk, has been observed in some countries. As for other persistent organic pollutants (POPs), dietary intake is very probably the main route of exposure to PBDEs for the general population. This paper reviews the state of the science regarding human exposure to PBDEs through the diet. Because of the scarce information about it, it is concluded that studies focused on determining PBDE exposure for the population of a number of countries are clearly required. The correlation of PBDE body burdens and dietary intake of PBDEs are also necessary.     

高效液相色谱法检测丙烯腈-丁二烯-苯乙烯塑料中多溴联苯醚

建立了超声萃取-高效液相色谱法同时测定丙烯腈-丁二烯-苯乙烯(ABS)塑料中12种多溴联苯醚(PBDEs)的方法。样品经甲苯/异辛烷(V/V=5/1)提取,离心(5000r/min),过0.45μm滤膜净化。用Waters-C18液相色谱柱(5μm,4.6×250 mm)分离,以甲醇、乙腈和水为流动相进行梯度洗脱,在波长226nm处检测,外标法定量。多溴联苯醚在5~500mg/L的范围内,有良好的线性关系(r=0.9999),检出限为0.07~0.2mg/L,萃取率在87.4%~103.1%之间,相对标准偏差小于2.0%。     

Gas chromatography/ion trap mass spectrometry applied for the determination of polybrominated diphenyl ethers in soil

A gas chromatography/ion trap mass spectrometry (GC/ITMS) method was developed for the determination of polybrominated diphenyl ethers (PBDEs). ITMS parameters were optimized in order to achieve the best sensitivity for the PBDE analysis. Tandem mass spectrometry, along with an isotope dilution internal standard method, was used for the quantitation. Chromatographic windows were developed for mono- to hepta-BDEs, depending on the retention times when a 30-m GC column was used. A different 15-m column was used to analyze deca-BDE. Environmental soil samples collected from an electronic waste recycling site were prepared by using Soxhlet extraction and column chromatographic cleanup. Average recoveries of 61-118% were obtained for the 13C-labeled PBDE internal standards spiked in the samples prior to sample preparation. The accuracy represented by relative analytical errors was -24% to 18%, and the precision (relative standard deviation) was 11-26% (n=8). The method detection limits ranged from 0.013-0.25 ng/g for the PBDEs in soil.     

Influence of the injection technique and the column system on gas chromatographic determination of polybrominated diphenyl ethers

In this paper, we present an investigation of the influence of the gas chromatographic separation system on the determination of polybrominated diphenyl ethers (PBDEs). Capillary columns, retention gaps and press-fit connectors, as well as different injection techniques have been evaluated with respect to yield and repeatability. The split/splitless injection has been optimized and compared to on-column injection, the septum equipped temperature programmable injector (SPI) and the programmable temperature vaporizing (PTV) injector. Furthermore, a comparison of the different operational modes of the PTV injector is presented. The results show that there are large variations in the yield of PBDEs depending on the column and the injection systems. Especially the high molecular weight BDE congeners can be subject to severe discrimination. Unfavorable conditions can lead to a complete loss of nona and deca substituted BDE congeners.     

Gas chromatography-mass spectrometric determination of polybrominated diphenyl ethers in complex fatty matrices from aquaculture activities

Gas chromatography coupled to mass spectrometry in negative chemical ionization mode (GC-(NCI)MS) has been applied to the quantification and reliable identification of polybrominated diphenyl ethers (PBDEs) in animal and vegetable samples from aquaculture activities. Matrices analyzed included fish fillet, fish feed, fish oil and linseed oil, their fat content ranged from 5% to 100%. Solid-phase extraction (SPE) (using Florisil and silica cartridges) and normal-phase high performance liquid chromatography were tested for an efficient clean-up in order to obtain sample extracts free of interfering compounds. Combining sulphuric acid digestion and SPE with Florisil led to the highest efficiency in the elimination of interferences from the extracts. The sample procedure developed, together with the application of GC-(NCI)MS for measurement, led to the satisfactory determination of PBDEs at μg kg ⁻¹ levels in complex aquaculture matrices with high lipid content. The use of a short and thin film-thickness fused-silica capillary column allowed to determine the problematic BDE 209 with satisfactory results. Three m/z ions were acquired for each analyte, which ensured a reliable identification of compounds detected in samples.     

Competitive immunoassay for monitoring polybrominated diphenyl ethers in PM2.5 in Shanghai

In this paper, a sensitive biotin–streptavidin (BS)-ELISA was developed for determining the polybrominated diphenyl ethers in PM_2.5. For establishing this proposed BS-ELISA, we prepared the biotinylated antibody primarily. And for reducing the background interference, some in?uencing factors and procedures for this immunoassay were also discussed and optimised. Under the optimal conditions, the IC₅₀ = 0.53 ng/mL; IC₁₀ was 0.002 ng/mL; and the results were almost consistent with those using the gas chromatography and electron capture detection (GC-ECD). Less procedures and simpler sample preparation were required for this method compared with the GC-ECD. The results showed that the highest value of BDE-47 concentration occurred in December, which might re?ect the combination of heating and industrial pollution. In our analysis, we studied the Pearson correlations between BDE-47/PM_2.5 and gaseous pollutants (such as NO₂, SO₂, CO, O₃, PM₁₀ and PM_2.5). BDE-47 showed a higher correlation with NO₂ than that with PM₁₀, PM_2.5 and SO₂, which implied that the BDE-47 emission process might be accompanied by the emission of NO₂. Moreover, during the Spring Festival, the concentration of BDE-47 in PM_2.5 decreased significantly, whereas the PM_2.5 changed little. This suggested factories and vehicles might be the major contributors to BDE-47 emissions (but not to PM_2.5).     

Methods for determination of polybrominated diphenyl ethers in environmental samples - review

Polybrominated diphenyl ethers (PBDEs) are a group of persistent organic pollutants. They are used as flame retardants in plastics, paints, varnishes and textile materials. PBDEs pose great risk to the environment because of their high persistence and ability to get into the environment easily due to the lack of chemical bonds with the matrix of materials, to which they are added. Global research studies confirmed the occurrence of those compounds in the majority of elements of water and land environment. Analysis of PBDEs in environmental samples is one of the specific analytical methods of criteria that comprise low detection limits and high selectivity. The analysis of PBDEs in environmental samples is one of the specific analytical methods, in which the main criteria are low detection limits and high selectivity. In this article, a literature review of methods for environmental sample preparation and analysis of the PBDE content was presented. The article discusses the potential of modern extraction techniques such as: solid-phase microextraction, single-drop microextraction, dispersive liquid-liquid microextraction, microwave-assisted extraction, cloud point extraction, hollow fibre-liquid phase microextraction and others for the separation of PBDEs from environmental samples with a complex matrix. Among the methods for qualitative and quantitative determination of PBDEs, a particular focus was put on gas chromatography/mass spectrometry with various injection techniques and different types of sample ionisation.     

Determination of polybrominated diphenyl ethers in environmental standard reference materials

Standard reference materials (SRMs) are valuable tools in developing and validating analytical methods to improve quality assurance standards. The National Institute of Standards and Technology (NIST) has a long history of providing environmental SRMs with certified concentrations of organic and inorganic contaminants. Here we report on new certified and reference concentrations for 27 polybrominated diphenyl ether (PBDE) congeners in seven different SRMs: cod-liver oil, whale blubber, fish tissue (two materials), mussel tissue and sediment (two materials). PBDEs were measured in these SRMs, with the lowest concentrations measured in mussel tissue (SRM 1974b) and the highest in sediment collected from the New York/New Jersey Waterway (SRM 1944). Comparing the relative PBDE congener concentrations within the samples, we found the biota SRMs contained primarily tetrabrominated and pentabrominated diphenyl ethers, whereas the sediment SRMs contained primarily decabromodiphenyl ether (BDE 209). The cod-liver oil (SRM 1588b) and whale blubber (SRM 1945) materials were also found to contain measurable concentrations of two methoxylated PBDEs (MeO-BDEs). Certified and reference concentrations are reported for 12 PBDE congeners measured in the biota SRMs and reference values are available for two MeO-BDEs. Results from a sediment interlaboratory comparison PBDE exercise are available for the two sediment SRMs (1941b and 1944).     

Selective pressurized liquid extraction of polybrominated diphenyl ethers in fish

A fast and simple method for the analysis of polybrominated diphenyl ethers (PBDEs) in fish samples was developed using a one-step extraction and clean-up by means of pressurized liquid extraction (PLE) combined with gas chromatography-ion trap tandem mass spectrometry (GC-ITMS-MS). The selective PLE method provided to obtain ready-to-analyse extracts without any additional clean-up step, using a sorbent as fat retainer inside the PLE cell. Several PLE operating conditions, such as solvent type, extraction temperature and time, number of cycles and type of fat retainer, were studied. Using Florisil as fat retainer, maximum recoveries of PBDEs (83-108%) with minimum presence of matrix-interfering compounds were obtained using a mixture of n-hexane:dichloromethane 90:10 (v/v) as solvent, an extraction temperature of 100 °C and a static extraction time of 5 min in combination with three static cycles. Quality parameters of the method were established using standards and fish samples. Limits of detection and quantification ranged from 10 to 34 pg g⁻¹ wet weight and between 34 and 68 pg g⁻¹ wet weight, respectively. In addition, good linearity (between 1 and 500 ng ml⁻¹) and high precision (RSD % < 15%) were achieved. The method was validated using the standard reference material SRM-1945 (whale blubber) and was then applied to the analysis of PBDEs in fish samples.