An efficient one-pot synthesis of functionalized chromeno[4,3-<Emphasis Type="Italic">b</Emphasis>]pyridine derivatives under catalyst-free conditions

A concise, efficient one-pot synthesis of functionalized chromeno[4,3-b]pyridine derivatives via a three-component reaction of 4-oxo-4H-chromene-3-carbaldehydes, malononitrile or cyanoacetates, and aromatic amines under catalyst-free conditions in an environmentally friendly medium (ethanol–water, 3:1 v/v) is described. This synthesis involves a group-assisted purification process, which avoids traditional recrystallization and chromatographic purification methods.     

Synthesis of new 1,5-diaryl-3-(arylamino)-1H-pyrrol-2(5H)-ones under catalyst-free and solvent-free conditions

Several new 1,5-diaryl-3-(arylamino)-1H-pyrrol-2(5H)-ones were synthesized via the three-component condensation reaction of aldehydes, aromatic amines, and ethyl pyruvate under catalyst-free and solvent-free conditions. Also, 5-(4-hydroxyl-3-nitrophenyl)-1-(4-methoxy-phenyl)-3-(4-methoxyphenylamino)-1,5-dihydro-pyrrol-2-one was synthesized using oxime instead of aldehyde. The eco-friendly, simple procedure, green procedure, catalyst-free and solvent-free conditions, short reaction times, and high yields of the products are the advantages of this method.     

An unexpected tetracyclic product isolated during the synthesis of biscoumarins catalyzed by [MIM(CH2)4SO3H][HSO4]: Characterization and X-ray crystal structure of 7-(2-hydroxy-4-oxo-4H-chromen-3-yl)-6H,7H-chromeno[4,3-b]chromen-6-one

Under solvent-free conditions and in the presence of 3-methyl-1-(4-sulfonic acid)butylimidazolium hydrogen sulfate [MIM(CH₂)₄SO₃H][HSO₄], a Brønsted acidic ionic liquid, the reaction of aromatic aldehydes with 4-hydroxycoumarin has been investigated. A wide range of aromatic aldehydes easily undergoes condensation with 4-hydroxycoumarin to afford biscoumarins with good purity in excellent yields. However, reaction of 2-hydroxybenzaldehyde with 4-hydroxycoumarin gave, not the corresponding biscoumarin, but a tetracyclic compound, 7-(2-hydroxy-4-oxo-4H-chromen-3-yl)-6H,7H-chromeno[4,3-b]chromen-6-one, in high yield.     

An efficient and facile synthesis of new tetracyclic fused pyrazolo[4,3-<Emphasis Type="Italic">c</Emphasis>][1,2,4]triazino[4,5-<Emphasis Type="Italic">a</Emphasis>]quinolin-4(5<Emphasis Type="Italic">H</Emphasis>)-ones

Reaction of amidrazones 1a–1i with (1,5-dihydro-3-methyl-5-oxo-1-phenyl-4H-pyrazol-4-ylidene)propanedinitrile (2) in ethyl acetate solution in one-step reaction led to the formation of unprecedented pyrazolo[4,3-c][1,2,4]triazino[4,5-a]quinolin-4(5H)-ones 3a–3g along with pyrazolo[4,3-c][1,2,4]triazino[4,5-a]quinolin-12b-oles 3h–3m in moderate to excellent yields. These novel heterocycles were formed via a Michael addition reaction followed by intramolecular cyclization via a dearomatization process.     

Poly(ethylene glycol)/poly(2-acrylamido-2-methyl-1-propane sulfonic acid) gel electrolytes: a detailed investigation of their conductivity and characterization

Poly(ethylene glycol)/poly(2-acrylamido-2-methyl-1-propane sulfonic acid) (PEG/PAMPS) with a transparent appearance were prepared in the presence of ammonium persulfate (APS) as an initiator at 70 °C for 24 h. PEG/PAMPS-based polymer gel electrolytes in a motionless and uniform state were obtained by adding the required amount of liquid electrolytes to a dry PEG/PAMPS polymer. Liquid electrolytes include organic solvents with high boiling points (-1-methyl-2-pyrrolidone (NMP) and γ-butyrolactone (GBL)) and a redox couple (alkali metal iodide salt/iodine). The optimized conditions for PEG/PAMPS-based gel electrolytes based on the salt type, the concentration of alkali metal iodide salt/iodine, and solvent volume ratio were determined to be NaI, 0.4 M NaI/0.04 M I₂, and NMP:GBL (7:3, v/v), respectively. The highest ionic conductivity and the liquid electrolyte absorbency were 2.58 mS cm^?1 and 3.6 g g^?1 at 25 °C, respectively. The ion transport mechanism in both the polymer gel electrolytes and liquid electrolytes is investigated extensively, and their best fits with respect to the temperature dependence of the ionic conductivity are determined with the Arrhenius equation.     

Tripolyphosphate as Precursor for REPO4:Eu3+ (RE = Y, La, Gd) by a Polymeric Method

A modification of the Pechini method was applied to obtain luminescent rare earth orthophosphates. The developed synthetic route is based on the ability of the tripolyphosphate anion () to act both as a complexing agent and as an orthophosphate precursor. Heating of aqueous solutions containing RE³⁺, Eu³⁺, , citric acid, and ethylene glycol led to polymeric resins. The ignition of these resins at different temperatures yielded luminescent orthophosphates. The produced nanosized phosphors (YPO₄:Eu³⁺, (Y,Gd)PO₄:Eu³⁺, and LaPO₄:Eu³⁺) were analyzed by infrared and luminescence spectroscopies, X-ray diffractometry, and scanning electron microscopy.     

Formamide reactions on rutile TiO2(0 1 1) surface

The reaction of formamide over the (0 1 1) faceted TiO₂(0 0 1) surface has been studied by Temperature Programmed Desorption (TPD) and X-ray Photoelectron Spectroscopy (XPS). Two main reactions were observed: dehydration to HCN and H₂O and decomposition to NH₃ and CO. The dehydration reaction was found to be three to four times larger than the decomposition at all coverages. Each of these reactions is found to occur in two temperature domains which are dependent upon surface coverage. The low temperature pathway (at about 400 K) is largely insensitive to surface coverage while the high temperature pathway (at about 500 K) shifts to lower temperatures with increasing surface coverage. These two temperature pathways may indicate two adsorption modes of formamide: molecular (via an η¹(O) mode of adsorption) and dissociative (via an η²(O,N) mode of adsorption). C1s and N1s XPS scans indicated the presence of multiple species after formamide absorption at 300 K. These occurred at ca. 288.5 eV (-CONH-) and 285 eV (sp³/sp² C) for the C1s and 400 eV-(NH₂), 398 eV (-NH) and 396 eV (N) for the N1s and result from further reaction of formamide with the surface.     

The chemistry of C2 perfluoroalkyl iodide on the Cu(1 1 1) single crystal surface

The thermal chemistry of perfluoroethyl iodide (C₂F₅I) adsorbed on Cu(1 1 1) has been investigated by temperature-programmed reaction/desorption (TPR/D), reflection-absorption infrared spectroscopy (RAIRS), and X-ray photoelectron spectroscopy (XPS). I 4d and F 1s XPS spectra show that dissociative adsorption of C₂F₅I to form the surface-bound perfluroethyl (Cu-C₂F₅) moieties occurs at very low temperature (T < 90 K), while the C-F bond cleavage in adsorbed perfluroethyl (Cu-C₂F₅) begins at ca. 300 K. XPS and TPR/D studies further reveal that the reactions of ^βCF₃^αCF_2(ad) on Cu(1 1 1) are strongly dependent on the surface coverage. At high coverages (?0.16 L exposure), the adsorbed perfluroethyl (Cu-C₂F₅) evolves, via α-F elimination, into the surface-bound tetrafluoroethylidene moieties (CuCF-CF₃) followed by a dimerization step to form octafluoro-2-butene (CF₃CFCFCF₃) at 315 K as gas product. The surface-bound (Cu-C₂F₅) decomposes preferentially, at low coverages (?0.04 L), via consecutive α-F abstraction to afford intermediate, trifluoroethylidyne (CuCCF₃), resulting in the final coupling reaction to yield hexafluoro-2-butyne (CF₃CCCF₃) at 425 K. However, at middle coverages (ca. 0.08-0.16 L exposure), the adsorbed perfluroethyl (Cu-C₂F₅) first experiences an α-F elimination and then prefers to loss the second F from β position to yield the intermediate of Cu-CF₂-CFCu (μ-η,η-perfluorovinyl), which may further evolve into hexafluorocyclobutene (CF₂CFCFCF₂) at 350 K through cyclodimerization reaction. Our results have also shown that the surface reactions to yield the products, CF₃CFCFCF₃ and CF₃CCCF₃, obey first-order kinetics, whereas the formation of CF₂CFCFCF₂ follows second-order kinetics.     

Crystal structure and thermodynamic properties of phase change material bis(1-dodecylammonium) tetrachlorochromate (C12H25NH3)2CdCl4(s)

A novel complex bis(1-dodecylammonium) tetrachlorochromate (C₁₂H₂₅NH₃)₂CdCl₄(s) (abbreviated as C₁₂Cd(s)) was synthesized by liquid phase reaction. Crystal structure and composition of the complex were determined by X-ray crystallography, chemical analysis, and elemental analysis. It is triclinic, the space group is P?1 and Z = 2. Lattice potential energy (LPE) of the complex was calculated to be kJ·mol^?1 from crystallographic data. Low-temperature heat capacities were measured by a precise automatic adiabatic calorimeter over the temperature range from 78 to 370 K. The temperature, molar enthalpy, and entropy of the phase transition of the complex were determined to be 331.88 ± 0.02 K, 55.79 ± 0.46 kJ·mol^?1, and 168.10 ± 1.38 J·K^?1·mol^?1, respectively. Two polynomial equations of the heat capacities as a function of temperature were fitted by least-square method. Smoothed heat capacities and thermodynamic functions of the complex were calculated.     

Spectra and structure of hydroxycoumarin and hydroxyfurocoumarin salts

The sodium salts of 4-hydroxycoumarin, 5-hydroxy[2, 37, 6-furo]coumarin (bergaptol), 6-dyroxycoumarin, 7-hydroxycoumarin (umbelliferone) and 8-hydroxy[2, 37, 6-furo]coumarin (santhotoxol) have been prepared and their IR and UV spectra determined. The position and intensity of the IR absorption bands of these salts (both in the crystalline state and in D₂O solution) show that the ions of 7-hydroxycoumarin, 5-hydroxyfurocoumarin, and 5-hydroxycoumarin exist in a form intermediate between quinoid and coumarin, and the ions of 6-hydroxycoumarin and 8-hydroxyfurocoumarin exist as coumarins.In conclusion we thank G. K. Nikonov and Zh. A. Manaeva for the kind gift of the hydroxycoumarins and hydroxyfurocoumarins.     

Thermal chemistry of diiodomethane on Ni(1 1 0) surfaces II. Effect of coadsorbed oxygen

The effect of coadsorbed oxygen on the thermal chemistry of diiodomethane on Ni(1 1 0) single-crystal surfaces was studied by temperature-programmed desorption (TPD) and X-ray photoelectron spectroscopy (XPS). I 3d and C 1s XPS data indicated that adsorbed diiodomethane undergoes two sequential C-I bond scission steps to ultimately produce methylene surface species, the same as on clean Ni(1 1 0). Moreover, significant amounts of methane and other heavier hydrocarbons are produced after further thermal activation of those chemisorbed methylene groups. The production of alkanes and alkenes, which is accounted for by a chain growth mechanism where the initial hydrogenation of some adsorbed methylene to methyl moieties is followed by a rate-limiting methylene insertion step to yield ethyl intermediates, is inhibited but not fully blocked by the coadsorbed oxygen. New reaction pathways are also opened up by the presence of oxygen in this system, including a direct coupling of two methylene groups to ethene, the insertion of an oxygen atom into a nickel-methylene group to produce formaldehyde, and a parallel methylene insertion chain growth sequence starting from a CH₂I_ads intermediate to ultimately yield C₃H₅ and C₄H₇ unsaturated gas-phase radicals.     

Modelling of phase transitions and reaction at CO adsorption on oxygen precovered Pd(1 1 1)

Using the interaction parameters up to the third neighbors and activated form of O and CO diffusion and their reaction, the model has been proposed for Monte-Carlo simulations describing the catalytic O + CO → CO₂ reaction and occurring phase transitions on Pd(1 1 1) surface. Upon adsorption of CO the pre-adsorbed oxygen transforms from p(2 × 2)_O phase into and phases in the limit of room and moderate temperatures, respectively. We demonstrate that the kinetic effects determine both the occurrence of the p(2 × 1)_O and disappearance of the phases at moderate and low temperatures, respectively. Using reaction rate as a fit parameter, we show that at room temperature the start of the reaction can be synchronized with the occurrence of phase.     

Site-blocking effects of preadsorbed H on Pt(1 1 1) probed by 1,3-butadiene adsorption and reaction

The influence of hydrogen coadsorption on hydrocarbon chemistry on transition metal surfaces is a key aspect to an improved understanding of catalytic selective hydrogenation. We have investigated the effects of H preadsorption on adsorption and reaction of 1,3-butadiene (H₂CCHCHCH₂, C₄H₆) on Pt(1 1 1) surfaces by using temperature-programmed desorption (TPD) and Auger electron spectroscopy (AES). Preadsorbed hydrogen adatoms decrease the amount of 1,3-butadiene chemisorbed on the surface and chemisorption is completely blocked by the hydrogen monolayer (saturation) coverage (θ_H = 0.92 ML). No hydrogenation products of reactions between coadsorbed H adatoms and 1,3-butadiene were observed to desorb in TPD experiments over the range of θ_H investigated (θ_H = 0.6-0.9 ML). This is in strong contrast to the copious evolution of ethane (CH₃CH₃, C₂H₆) from coadsorbed hydrogen and ethylene (CH₂CH₂, C₂H₄) on Pt(1 1 1). Hydrogen adatoms effectively (in a 1:1 stoichiometry) remove sites from interaction with chemisorbed 1,3-butadiene, but do not affect adjacent sites. The adsorption energy of coadsorbed 1,3-butadiene is not affected by the presence of hydrogen on Pt(1 1 1). The chemisorbed 1,3-butadiene on hydrogen preadsorbed Pt(1 1 1) completely dehydrogenates to H₂ and surface carbon upon heating without any molecular desorption detected, which is identical to that observed on clean Pt(1 1 1). In addition to revealing aspects of site blocking that should have broad implications for hydrogen coadsorption with hydrocarbon molecules on transition metal surfaces in general, these results also provide additional basic information on the surface science of selective catalytic hydrogenation of butadiene in butadiene-butene mixtures.     

Vanillic aldehydes for the one-pot synthesis of novel 2-oxo-1,2,3,4-tetrahydropyrimidines

A small library of novel 2-oxo-1,2,3,4-tetrahydropyrimidines was synthesized via a one-pot multicomponent Biginelli reaction. Copper complex \((\hbox {PhNH}_{3})_{2}\hbox {CuCl}_{4,}\) which was used for the first time as a homogeneous and heterogeneous catalyst, makes this a facile and efficient reaction at room temperature. All the obtained products fall out of the solution in pure form and are easily isolated via filtration in good-to-excellent yields. The molecular structure of one of the products, ethyl 6-methyl-2-oxo-4-(4\(^\prime \)-isopropoxy-3\(^\prime \)-methoxyphenyl) - 1,2,3,4 - tetrahydropyrimidine-5- carboxylate, has been determined by X-ray crystallography. All non-hydrogen atoms in the heterocyclic, six-membered ring are determined to be approximately coplanar.     

Theoretical study of CO and Pb adsorption on the Ni(1 1 1) and Ni3Al(1 1 1) surfaces

Adsorption of CO molecules and Pb atoms on the Ni(1 1 1) and Ni₃Al(1 1 1) substrates is studied theoretically within an ab initio density-functional-theory approach. Stable adsorption sites and the corresponding adsorption energies are first determined for stoichiometric surfaces. The three-fold hollow sites (fcc for Pb and hcp for CO) are found most favourable on both substrates. Next, the effect of surface alloying by a substitution of selected topmost substrate atoms by Pb or Ni atoms on the adsorption characteristics is investigated. When the surface Al atoms of the Ni₃Al(1 1 1) substrate are replaced by Ni atoms, the Pb and CO adsorption energies approach those for a pure Ni(1 1 1) substrate. The Pb alloying has a more substantial effect. On the Ni₃Al(1 1 1) substrate, it reduces considerably adsorption energy of CO. On the Ni(1 1 1) substrate, CO binding strengthens slightly upon the formation of the Ni(1 1 1)p(2×2)-Pb surface alloy, whereas it weakens drastically when the Ni(1 1 1)-Pb surface alloy is formed.     

A comparative study on the effects of salt and filler on transport and structural properties of organic–inorganic hybrid electrolytes

Organic–inorganic hybrid electrolytes based on the reaction of tri-block copolymer poly(propylene glycol)-block-poly(ethylene glycol)-block-poly(propylene glycol) bis(2-aminopropyl ether), poly(ethylene glycol diglycidyl ether, and (3-glycidyloxypropyl)trimethoxysilane doped with LiClO₄ and SiO₂ nanoparticles were synthesized by a sol–gel process. The structural and dynamic properties of the materials thus obtained were systematically investigated by Fourier transform infrared spectroscopy, differential scanning calorimetry, thermogravimetric analysis, alternate current impedance, and ¹³C solid-state NMR measurements. A maximum ionic conductivity of 3.2?×?10^?5 S cm^?1 was obtained at 30 °C for the solid hybrid electrolyte with a [O]/[Li] ratio of 16 and 7 wt% of SiO₂ nanoparticles. A Vogel–Tamman–Fulcher-like temperature dependence of ionic conductivity was observed for the hybrid electrolytes, implying that the diffusion of charge carriers was assisted by the segmental motions of the polymer chains.     

Tandem diazonium salt electroreduction and click chemistry as a novel, efficient route for grafting macromolecules to gold surface

Bis-alkynylated oligoethyleneglycol (OEG) and a monopropargyl-functionalized perfluorinated ethylene glycol (FEG) were clicked to azide-functionalized gold surface (Au–N₃) at room temperature via the well known 1,3 cycloaddition click chemical reaction. The Au–N₃ substrate was obtained by nucleophilic attack of NaN₃ on gold substrates modified by the electrochemical reduction of the , ⁺N₂–C₆H₄–CH₂Br diazonium salt. This electrochemical process yields aryl layer-modified gold of the type Au–C₆H₄–CH₂Br (hereafter Au–Br). The untreated and modified gold plates were examined by XPS, PMIRRAS and contact angle measurements. XPS brought evidence for electrografting aryl layers by the detection of Br3d; azide functionalization by the increase of the N/Br atomic ratio; and click reaction of OEG with Au–N₃ by the increase of O/N ratio. In addition, the perfluorinated plate (Au-FEG) exhibited F1s and characteristic C1s peaks from -(CF₂)₇- chain and terminal CF₃. Infra red spectroscopy (PMIRRAS) evidenced (i) grafting N₃ to Au–Br; (ii) characteristic stretching bands, from ethylene glycol units, C–O–C (1100–1300 cm⁻¹); CF₂ (1000–1100 cm⁻¹) and CF₃ (1100–1350 cm⁻¹) from FEG grafts; and (iii) suppression of alkynyl bands from OEG and FEG after surface click chemistry. More importantly, PMIRRAS results support an important bridging of the bispropargyl oligoethylene glycol at the gold surface. Water drop contact angles were found to be 48.7° and 83.0° for Au-OEG and Au-FEG, respectively, therefore highlighting the control over the hydrophilic/hydrophobic character of the clicked substrate.This work shows that clicking macromolecules to grafted, diazonium salt-derived aryl layers is a novel, simple and valuable approach for designing robust, functional surface organic coatings.     

Fluorescence enhancement of lanthanide(III) perchlorate by 1,10-phenanthroline in bis(benzoylmethyl) sulfoxide complexes and luminescence mechanism

Two novel ternary rare earth complexes LnL₅L′(ClO₄)₃2H₂O (Ln=Eu(III), Tb(III); L=bis(benzoylmethyl) sulfoxide, L′=phen) were synthesized and characterized by elemental analysis, coordination titration analysis, molar conductivity, IR, TG-DSC,¹H NMR and UV spectra. The fluorescence spectra illustrated that both the Eu(III) and Tb(III) ternary complexes displayed strong characteristic metal-centered fluorescence in solid state. After the introduction of the second ligand phen group, the relative emission intensities and fluorescence lifetimes of the ternary complex EuL₅L′(ClO₄)₃2H₂O (L=C₆H₅COCH₂SOCH₂COC₆H₅, L′=phen) enhanced more obviously than that of the binary complex EuL₅(ClO₄)₃3H₂O. This indicated that the presence of both organic ligands bis(benzoylmethyl) sulfoxide and the second ligand phen could sensitize fluorescence intensities of Eu(III) ions, and the introduction of phen group was resulted in the enhancement of the fluorescence properties of the Eu(III) ternary rare earth complexes. The phosphorescence spectra are also discussed.