Poly(epsilon-caprolactone)/clay nanocomposites via “click” chemistry

Poly(epsilon-caprolactone)/clay nanocomposites were prepared by copper(I) catalyzed azide/alkyne cycloaddition (CuAAC) “click” reaction. In this method, ring-opening polymerization of epsilon-caprolactone using propargyl alcohol as the initiator has been performed to produce alkyne-functionalized PCL and the obtained polymers were subsequently attached to azide-modified clay layers by a CuAAC “click” reaction. The exfoliated polymer/clay nanocomposites were characterized by X-ray diffraction spectroscopy, thermogravimetric analysis and transmission electron microscopy.     

A Highly Active and Magnetically Recoverable Tris(triazolyl)–CuI Catalyst for Alkyne–Azide Cycloaddition Reactions

Nanoparticle‐supported tris(triazolyl)–CuBr, with a diameter of approximately 25 nm measured by TEM spectroscopy, has been easily prepared, and its catalytic activity was evaluated in the copper‐catalyzed azide–alkyne cycloaddition (CuAAC) reaction. In initial experiments, 0.5 mol % loading successfully promoted the CuAAC reaction between benzyl azide and phenylacetylene, in water at room temperature (25 °C). During this process, the iron oxide nanoparticle‐supported tris(triazolyl)–CuBr displayed good monodispersity, excellent recoverability, and outstanding reusability. Indeed, it was simply collected and separated from the reaction medium by using an external magnet, then used for another five catalytic cycles without significant loss of catalytic activity. Inductively coupled plasma (ICP) analysis for the first cycle revealed that the amount of copper leached from the catalyst into the reaction medium is negligible (1.5 ppm). The substrate scope has been examined, and it was found that the procedure can be successfully extended to various organic azides and alkynes and can also be applied to the one‐pot synthesis of triazoles, through a cascade reaction involving benzyl bromides, alkynes, and sodium azide. In addition, the catalyst was shown to be an efficient CuAAC catalyst for the synthesis of allyl‐ and TEG‐ended (TEG=triethylene glycol) 27‐branch dendrimers.     

A General Method for Preparing Bridged Organosilanes with Pendant Functional Groups and Functional Mesoporous Organosilicas

New organosilica precursors containing two triethoxysilyl groups suitable for the organosilica material formation through the sol‐gel process were designed and synthesised. These precursors display alkyne or azide groups for attaching targeted functional groups by copper‐catalysed azide–alkyne cycloaddition (CuAAC) and can be used for the preparation of functional organosilicas following two strategies: 1) the functional group is first appended by CuAAC under anhydrous conditions, then the functional material is prepared by the sol‐gel process; 2) the precursor is first subjected to the sol‐gel process, producing porous, clickable bridged silsesquioxanes or periodic mesoporous organosilicas (PMOs), then the desired functional groups are attached by means of CuAAC. Herein, we show the feasibility of both approaches. A series of bridged bis(triethoxysilane)s with different pending organic moieties was prepared, demonstrating the compatibility of the first approach with many functional groups. In particular, we demonstrate that organic functional molecules bearing only one derivatisation site can be used to produce bridged organosilanes and bridged silsesquioxanes. In the second approach, clickable PMOs and porous bridged silsesquioxanes were prepared from the alkyne‐ or azide‐containing precursors, and thereafter, functionalised with complementary model azide‐ or alkyne‐containing molecules. These results confirmed the potential of this approach as a general methodology for preparing functional organosilicas with high loadings of functional groups. Both approaches give rise to a wide range of new functional organosilica materials.     

Synthesis of mikto‐topology star polymer containing one cyclic arm

Well‐defined mikto‐topology star polystyrene composed of one cyclic arm and four linear arms was synthesized by a combination of atom transfer radical polymerization (ATRP) and Cu‐catalyzed azide‐alkyne cycloaddition (CuAAC) click reaction. First, the bromine‐alkyne α,ω‐linear polystyrenes containing four hydroxyl groups protected with acetone‐based ketal groups were synthesized by ATRP of styrene using a designed initiator. Then, the bromine end‐group was converted to the azide and the linear polystyrene was cyclized intra‐molecularly by the CuAAC reaction. The four hydroxyl groups were released by deprotection and then esterified with 2‐bromoisobutyryl bromide to produce a cyclic polymer bearing four ATRP initiating units. By subsequent ATRP of styrene to grow linear polymers with the cyclic polystyrene as a macroinitiator, the mikto‐topology star polymers were prepared. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Quadruple click reactions for the synthesis of cysteine‐terminated linear multiblock copolymers

Synthesis of cysteine‐terminated linear polystyrene (PS)‐b‐poly(ε‐caprolactone) (PCL)‐b‐poly(methyl methacrylate) (PMMA)/or poly(tert‐butyl acrylate)(PtBA)‐b‐poly(ethylene glycol) (PEG) copolymers was carried out using sequential quadruple click reactions including thiol‐ene, copper‐catalyzed azide–alkyne cycloaddition (CuAAC), Diels–Alder, and nitroxide radical coupling (NRC) reactions. N‐acetyl‐L ‐cysteine methyl ester was first clicked with α‐allyl‐ω‐azide‐terminated PS via thiol‐ene reaction to create α‐cysteine‐ω‐azide‐terminated PS. Subsequent CuAAC reaction with PCL, followed by the introduction of the PMMA/or PtBA and PEG blocks via Diels–Alder and NRC, respectively, yielded final cysteine‐terminated multiblock copolymers. By ¹H NMR spectroscopy, the DP_ns of the blocks in the final multiblock copolymers were found to be close to those of the related polymer precursors, indicating that highly efficient click reactions occurred for polymer–polymer coupling. Successful quadruple click reactions were also confirmed by gel permeation chromatography. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Copper‐Chelating Azides for Efficient Click Conjugation Reactions in Complex Media

The concept of chelation‐assisted copper catalysis was employed for the development of new azides that display unprecedented reactivity in the copper(I)‐catalyzed azide–alkyne [3+2] cycloaddition (CuAAC) reaction. Azides that bear strong copper‐chelating moieties were synthesized; these functional groups allow the formation of azide copper complexes that react almost instantaneously with alkynes under diluted conditions. Efficient ligation occurred at low concentration and in complex media with only one equivalent of copper, which improves the biocompatibility of the CuAAC reaction. Furthermore, such a click reaction allowed the localization of a bioactive compound inside living cells by fluorescence measurements.     

Fluorescent probe for Fe(III) based on pyrene grafted multiwalled carbon nanotubes by click reaction

The attempt to decorate carbon nanotubes with organic molecules to form new functional materials has attracted broad attention in the scientific community. Here, we report the covalent functionalization of multiwalled carbon nanotubes (MWCNTs) with pyrene via Cu(I)-catalysed azide/alkyne click (CuAAC) reactions under mild conditions to afford the nanocomposites of pyrene-MWCNTs. Fourier transform infrared spectroscopy (FT-IR), ultraviolet and visible spectroscopy (UV-Vis), and fluorescence spectroscopy were used to characterize the nanocomposites of pyrene clicked MWCNTs. Experimental results indicate that the CuAAC reaction occurs in an efficient manner and the spacer linking MWCNTs and the photoactive molecule is well defined. In contrast to the noncovalent functionalization of π-π stacking, the nanocomposites of pyrene clicked MWCNTs show relatively strong fluorescence and have potential applicability in photoluminescent devices as a highly sensitive and selective fluorescence "turn-off" sensor for Fe(3+).     

How good is CuAAC “click” chemistry for polymer coupling reactions?

¹H NMR and SEC analyses are used to investigate the overall efficiency of Copper Catalyzed Azide Alkyne Cycloaddition (CuAAC) “click” coupling reactions between alkyne‐ and azide‐terminated polymers using polystyrene as a model. Quantitative convolution modeling of the entire molecular weight distribution is applied to characterize the outcomes of the functional polymer synthesis reactions (i.e., by atom transfer radical polymerization), as well as the CuAAC coupling reaction. Incomplete functionality of the azide‐terminated polystyrene (∼92%) proves to be the largest factor compromising the efficacy of the CuAAC coupling reaction and is attributed primarily to the loss of terminal bromide functionality during its synthesis. The efficiency of the S_N2 reaction converting bromide to azide was found to be about 99%. After taking into account the influence of non‐functional polymer, we find that, under the reaction conditions used, the efficiency of the CuAAC coupling reaction determined from both techniques is about 94%. These inefficiencies compromise the fidelity and potential utility of CuAAC coupling reactions for the synthesis of hierarchically structured polymers. While CuAAC efficiency is expected to depend on the specific reaction conditions used, the framework described for determining reaction efficiency does provide a means for ultimately optimizing the reaction conditions for CuAAC coupling reactions. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 75–84     

Synthesis and Catalytic Studies of Thermoresponsive Copper (I) Complex towards Click Reactions

Click reaction or copper-assisted azide–alkyne cycloaddition (CuAAC) reaction can conveniently synthesize desired organic molecules or functionalize biological macromolecules. In many cases, trace amounts of residual copper from the reaction mixture are not trivial to remove when the exhaustive purification step is avoided to fulfill the essential criteria of a click reaction. It is often detrimental, particularly for biochemical applications or when it involves biological macromolecules. Herein, we have reported the synthesis of a new type of copper (I) complex as a smart catalyst for click reaction, which can be separated from the reaction mixture very easily by the slight elevation of temperature, thanks to its thermoresponsive behavior. The click reactions using a thermoresponsive catalyst were first studied in an aqueous medium using various organic molecules containing alkyne and azide functional groups. Later, the strategy was extended to biological macromolecules like collagen.     

One‐pot preparation of ABA‐type block‐graft copolymers via a combination of “click” chemistry with atom transfer nitroxide radical coupling reaction

A new strategy for the one‐pot preparation of ABA‐type block‐graft copolymers via a combination of Cu‐catalyzed azide‐alkyne cycloaddition (CuAAC) “click” chemistry with atom transfer nitroxide radical coupling (ATNRC) reaction was reported. First, sequential ring‐opening polymerization of 4‐glycidyloxy‐2,2,6,6‐tetramethylpiperidine‐1‐oxyl (GTEMPO) and 1‐ethoxyethyl glycidyl ether provided a backbone with pendant TEMPO and ethoxyethyl‐protected hydroxyl groups, the hydroxyl groups could be recovered by hydrolysis and then esterified with 2‐bromoisobutyryl bromide, the bromide groups were converted into azide groups via treatment with NaN₃. Subsequently, bromine‐containing poly(tert‐butyl acrylate) (PtBA‐Br) was synthesized by atom transfer radical polymerization. Alkyne‐containing polystyrene (PS‐alkyne) was prepared by capping polystyryl‐lithium with ethylene oxide and subsequent modification by propargyl bromide. Finally, the CuAAC and ATNRC reaction proceeded simultaneously between backbone and PtBA‐Br, PS‐alkyne. The effects of catalyst systems on one‐pot reaction were discussed. The block‐graft copolymers and intermediates were characterized by size‐exclusion chromatography, ¹H NMR, and FT‐IR in detail. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

A UV‐Cleavable Bottlebrush Polymer with o‐Nitrobenzyl‐Linked Side Chains

An ultraviolet (UV)‐cleavable bottlebrush polymer is synthesized using the “grafting‐onto” strategy by combining living radical polymerization and copper‐catalyzed azide‐alkyne cycloaddition (CuAAC). In this approach, reversible addition‐fragmentation chain transfer polymerization is used to prepare a poly(methylacrylate) backbone with azide side groups, while atom transfer radical polymerization is employed to prepare polystyrene (PS) side chains end‐functionalized with o‐nitrobenzyl (UV‐cleavable) propargyl groups. CuAAC is then used to graft PS side chains onto the polymer backbone, producing the corresponding bottlebrush polymers with UV‐cleavable PS side chains. The formation of the bottlebrush polymer is characterized by ¹H nuclear magnetic resonance spectroscopy, gel permeation chromatography (GPC), and Fourier transform infrared spectroscopy. The cleavage behavior of the bottlebrush polymer is monitored in tetrahydrofuran solution under UV irradiation by GPC and viscosity measurements.

     

Combining aminocyanine dyes with polyamide dendrons: a promising strategy for imaging in the near-infrared region

Cyanine dyes are known for their fluorescence in the near-IR (NIR) region, which is desirable for biological applications. We report the synthesis of a series of aminocyanine dyes containing terminal functional groups such as acid, azide, and cyclooctyne groups for further functionalization through, for example, click chemistry. These aminocyanine dyes can be attached to polyfunctional dendrons by copper-catalyzed azide alkyne cycloaddition (CuAAC), strain-promoted azide alkyne cycloaddition (SPAAC), peptide coupling, or direct S(NR)1 reactions. The resulting dendron-dye conjugates were obtained in high yields and displayed high chemical stability and photostability. The optical properties of the new compounds were studied by UV/Vis and fluorescence spectroscopy. All compounds show large Stokes shifts and strong fluorescence in the NIR region with high quantum yields, which are optimal properties for in vivo optical imaging.     

Synthesis of Macrocyclic Depsipeptides via the Passerini–Click Reaction Strategy

Russian Journal of Organic Chemistry - A combination of the Passerini reaction and copper(I)-catalyzed azide–alkyne cycloaddition (CuAAC, click reaction) was used to synthesize...     

A reusable polymer‐supported copper(I) catalyst for triazole click reaction on water: An experimental and computational study

In the search for establishing a clickable copper‐catalysed (3 + 2) Huisgen azide–alkyne cycloaddition (CuAAC) reaction under strict conditions, in particular in terms of preventing the presence of copper particles/traces in reaction products and using an environmentally benign medium such as water, we describe here the synthesis of an aminomethyl polystyrene‐supported copper(I) catalyst (Cu(I)‐AMPS) and its characterization by means of Fourier transform infrared and energy‐dispersive X‐ray spectroscopies and scanning electron microscopy. Cu(I)‐AMPS was found to be highly active in the CuAAC reaction of various organic azides with alkynes affording the corresponding 1,4‐disubstituted 1,2,3‐triazoles in a regioselective manner in air at room temperature and using water as solvent. The insolubility and/or partial solubility of the organic azide and alkyne precursors as well as the heterogeneous Cu(I)‐AMPS catalytic system points to the occurrence of the cycloaddition at the organic–water interface ‘on water’ affording quantitative yields of water‐insoluble 1,2,3‐triazoles. A mechanistic study was performed using density functional theory aiming at explaining the observed reactivity and selectivity of the Cu (I)‐AMPS catalyst in CuAAC reactions.     

The High‐Throughput Synthesis and Phase Characterisation of Amphiphiles: A Sweet Case Study

A new method for the discovery of amphiphiles by using high‐throughput (HT) methods to synthesise and characterise a library of galactose‐ and glucose‐containing amphiphilic compounds is presented. The copper‐catalysed azide–alkyne cycloaddition (CuAAC) “click” reaction between azide‐tethered simple sugars and alkyne‐substituted hydrophobic tails was employed to synthesise a library of compounds with systematic variations in chain length and unsaturation in a 24‐vial array format. The liquid–crystalline phase behaviour was characterised in a HT manner by using synchrotron small‐angle X‐ray scattering (SSAXS). The observed structural variation with respect to chain parameters, including chain length and degree of unsaturation, is discussed, as well as hydration effects and degree of hydrogen bonding between head groups. The validity of our HT screening approach was verified by resynthesising a short‐chain glucose amphiphile. A separate phase analysis of this compound confirmed the presence of numerous lyotropic liquid–crystalline phases.     

Synthesis and characterization of polypropylene-graft-poly(l-lactide) copolymers by CuAAC click chemistry

The syntheses of polypropylene-graft-poly(l -lactide) copolymers (PP-g-PLAs) via copper (I)-catalyzed azide-alkyne cycloaddition “click” reaction (CuAAC) using azide side-chain functionalized polypropylene (PP-N₃) and alkyne end-functionalized poly(l -lactide) (PLA-Alkyne) were reported. The CuAAC was then applied to azide and different feeding ratios of alkyne functional polymers to give PP-g-PLAs that were characterized by FTIR, ¹H-NMR, GPC, DSC, and WCA measurements. The CuAAC click reaction was achieved by two different feeding ratio (PP-N₃:PLA-Alkyne = 1:5 and 1:10) and thermal, biodegradable, and surface properties of obtained graft copolymers were investigated. The molar ratio of PLA were calculated as 72.7 (PP-g-PLA-1) and 78.4% (PP-g-PLA-2) by ¹H-NMR spectroscopy. The water contact angle (WCA) values of PP-g-PLA-1 (81^o ± 1.3) and PP-g-PLA-2 (75^o ± 1.6) copolymers were compared with commercial chlorinated polypropylene (PP-Cl) (90^o ± 1.0), suggesting a more hydrophilic nature of desired graft copolymers produced. Conversely, the enzymatic biodegradation studies revealed that the weight losses of graft copolymers were determined as 13.6 and 22.1%, which is about 4% for commercial PP-Cl sample. Thus, it was clear that this simple and facile method was effective in promoting biodegradation of commercial polypropylene and attractive particularly for worldwide environmental remediation goals. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2595–2601     

Dual roles of substituted thiourea as reductant and ligand in CuAAC reaction

A highly efficient catalytic system, CuSO₄·5H₂O/1-(4-methoxyphenyl)-3-phenylthiourea, for the copper(I)-catalyzed azide–alkyne cycloaddition reaction (CuAAC) was discovered. In the above catalytic system, substituted thiourea acts both as a reductant and a ligand. CuSO₄·5H₂O/1-(4-methoxyphenyl)-3-phenylthiourea is both an economical and efficient catalyst for the CuAAC reaction. In addition, the new catalytic system has advantageous features including mild and green reaction conditions, and broad substrate compatibility. A variety of 1,4-disubstituted 1,2,3-triazoles have been prepared with good to excellent yields with the CuSO₄·5H₂O/1-(4-methoxyphenyl)-3-phenylthiourea catalytic system in aqueous solution.     

A smart porphyrin cage for recognizing azide anions

A smart porphyrin cage that can recognize azide anions by the changes of (1)H NMR spectra was synthesized by CuAAC "click" reaction in high yield.     

Preparation of a boronate-functionalized affinity hybrid monolith for specific capture of glycoproteins

A novel strategy for preparation of a boronate affinity hybrid monolith was developed using a Cu(I)-catalyzed 1,3-dipolar azide–alkyne cycloaddition (CuAAC) reaction of an alkyne–boronate ligand with an azide-functionalized monolithic intermediate. An azide-functionalized hybrid monolith was first synthesized via a single-step procedure to provide reactive sites for click chemistry; then the alkyne–boronate ligands were covalently immobilized on the azide-functionalized hybrid monolith via an in-column CuAAC reaction to form a boronate affinity hybrid monolith under mild conditions. The boronate affinity monolith was characterized and evaluated by means of elemental analysis, Fourier transform infrared spectroscopy, and scanning electron microscopy. The boronate affinity hybrid monolith exhibited excellent specificity toward nucleosides and glycoproteins, which were chosen as test cis-diol-containing compounds under neutral conditions. The binding capacity of the monolith for the glycoprotein ovalbumin was 2.36 mg?·?g^-1 at pH 7.0. The practicability of the boronate affinity hybrid monolithic material was demonstrated by specific capture of the glycoproteins ovalbumin and ovotransferrin from an egg sample.

On the Mechanism of Copper(I)‐Catalyzed Azide–Alkyne Cycloaddition

The copper(I)‐catalyzed azide–alkyne cycloaddition (CuAAC) reaction regiospecifically produces 1,4‐disubstituted‐1,2,3‐triazole molecules. This heterocycle formation chemistry has high tolerance to reaction conditions and substrate structures. Therefore, it has been practiced not only within, but also far beyond the area of heterocyclic chemistry. Herein, the mechanistic understanding of CuAAC is summarized, with a particular emphasis on the significance of copper/azide interactions. Our analysis concludes that the formation of the azide/copper(I) acetylide complex in the early stage of the reaction dictates the reaction rate. The subsequent triazole ring‐formation step is fast and consequently possibly kinetically invisible. Therefore, structures of substrates and copper catalysts, as well as other reaction variables that are conducive to the formation of the copper/alkyne/azide ternary complex predisposed for cycloaddition would result in highly efficient CuAAC reactions. Specifically, terminal alkynes with relatively low pK_a values and an inclination to engage in π‐backbonding with copper(I), azides with ancillary copper‐binding ligands (aka chelating azides), and copper catalysts that resist aggregation, balance redox activity with Lewis acidity, and allow for dinuclear cooperative catalysis are favored in CuAAC reactions. Brief discussions on the mechanistic aspects of internal alkyne‐involved CuAAC reactions are also included, based on the relatively limited data that are available at this point.