新型苯基桥键色谱固定相的热力学性质

将制备的球形苯基桥键型杂化介孔色谱固定相与商品化的C18和苯基键合硅胶固定相对比,研究其热力学性质。以稠环芳烃为例,探讨了溶质在固定相和流动相之间的迁移焓变、迁移熵变等热力学参数的变化。结果表明,与两种商品化的固定相不同,实验制备的苯基桥键固定相不存在明显的焓-熵补偿效应,证实新型桥键固定相分离机理是疏水作用、π-π作用、包结作用等协同作用的结果。     

氧化钨介孔材料的制备与表征

以介孔二氧化硅(KIT-6)为硬模板, 硅钨酸为钨源, 用硬模板法制备WO3-SiO2复合材料, 再利用HF除去二氧化硅, 得到了介孔三氧化钨材料. 用X射线衍射(XRD)、能量扩散X射线(EDX)、高分辨透射电镜(HRTEM)、N2吸附-脱附等表征手段, 对制备复合材料的物料比、煅烧温度以及不同分散剂等条件进行了考察. 结果表明, 硅钨酸与硅介孔的物料比(m(WO3)/m(SiO2))在3:1到4:1之间, 在600-750 ℃下煅烧, 能制备结构较好的介孔氧化钨. 乙醇和蒸馏水为分散剂时, 用乙醇为分散剂所得的介孔WO3材料具有更高的比表面积和孔体积.     

乙烷桥键介孔材料的制备及其在反相液相色谱中的应用

以1,2-二(三甲氧基硅基)-乙烷为硅源、聚氧乙烯-聚氧丙烯-聚氧乙烯三嵌段共聚物(EO20PO70EO20,P123)为模板剂、十六烷基三甲基溴化铵(CTAB)为共模板剂、乙醇为共溶剂,在酸性条件下合成了一种乙烷桥键有序介孔材料(PME)。研究表明,该PME具有高的比表面积(1152 m2/g)、高度有序的孔结构(二维六方相)、窄的孔径分布及表面光滑的球形形貌。将该PME不经化学改性直接用作反相高效液相色谱固定相,能够有效分离5种多环芳香族化合物(苯、萘、联苯、菲和芘)。     

桥联型有机-杂化介孔材料（PMOs）

PMOs是以桥联倍半硅氧烷为前驱体,在表面活性剂为结构控制剂的条件下通过溶胶-凝胶法合成的材料,它具有很高的表面积以及规则的孔道和较窄的孔径分布等特点,是一种性能优异的新型功能材料。本文论述了PMOs近年来的发展现状,介绍了PMOs的结构特点,根据结构中桥联有机基团的不同将其分为三类。总结了通过不同的模板合成PMOs的方法,并对影响性能的外部因素进行了探讨。最后提出了几个PMOs研究工作面临的问题,并对PMOs的发展前景作了展望。     

W掺杂SiO2介孔材料的制备与表征

以非离子表面活性剂三嵌段共聚物P123为模板剂、正硅酸乙酯(TEOS)为硅源、钨酸钠(Na2WO4·2H2O)为钨源, 通过水热法一步合成了W掺杂的二氧化硅介孔材料W-SiO2, 并通过XRD、HRTEM、EDX、FT-IR、N2吸附-脱附等表征手段, 考察了随着W含量增加, W-SiO2介孔材料结构的变化规律以及钨物种在材料中的存在状态. 结果表明, 当WO3含量w(WO3)约为10%时, W-SiO2中的钨物种是高度分散进入介孔骨架,形成W-O-Si 键; 当w(WO3)=20%时, 样品中开始有未掺入到SiO2骨架中WO3的结晶出现; 当w(WO3)约60%时, W-SiO2 样品能保持很好的介孔孔道结构, 更高含量WO3掺入将破坏二氧化硅介孔结构.     

介孔与介孔主客体材料在催化领域的应用

 综述了近年来介孔分子筛催化材料制备的研究成果及其在催化领域特别是精细化学品合成中的应用. 文章分为两部分,分别讨论了介孔材料本身作为催化剂以及介孔主客体催化材料的应用.     

介孔混合氧化物催化剂La-Co-Zr-O的制备与表征

 采用柠檬酸络合-有机模板剂分解法制备了(La+Co)/(La+Co+Zr)原子比为0.5的La-Co-Zr-O催化剂,并与传统的共沉淀法制备的La-Co-Zr-O催化剂进行比较. N2物理吸附结果表明,采用模板剂法制备的催化剂样品具有较大的比表面积(96.6～117.6 m2/g)和十分均匀的孔径(3.5～4.3 nm); X射线衍射、X射线光电子能谱和X射线吸收精细结构表征结果一致表明,催化剂中活性组分主要为高分散的Co3O4微晶(粒径为23～33 nm), 模板剂法制备的催化剂中所有组分的分散性均优于共沉淀法制备的催化剂. 程序升温还原实验结果表明,采用聚乙二醇辛基苯基醚与十六烷基三甲基溴化铵为混合模板剂制备的催化剂中Co3O4更容易被还原. Co-O 键的活动度与催化剂催化氧化反应的活性密切相关.     

环戊二烯掺杂乙烷桥联有序介孔材料的制备、表征及应用

 以单硅酯 (2-(环戊基-1,3-二烯基) 乙基) 三乙氧基硅烷 (TEECp) 和含有亚乙基桥键的硅酯 1,2-二 (三乙氧基硅基) 乙烷为硅源, 以三嵌段共聚物 P123 为模板剂, 通过调节 TEECp 预水解时间, 采用共聚法合成了环戊二烯掺杂乙烷桥联材料 (Cp-PMO), 并采用小角 X 射线衍射、N2 物理吸附、透射电镜、红外光谱和热重等技术对样品进行了表征. 结果表明, 环戊二烯基被成功引入到乙烷桥联材料中, 所得 Cp-PMO 样品具有高度有序的二维六方介孔孔道, 热稳定性较高; 随着材料中环戊二烯含量的增加, 其有序性降低, 孔径、比表面积和孔体积均有所减小, 孔壁逐渐增厚. 在乙酸乙酯与正丁醇的酯交换反应中, Cp-PMO 样品表现出较高的催化活性. 当该样品中环戊二烯含量为 30% 时, 乙酸乙酯转化率和乙酸丁酯收率分别可达 19.3% 和 10.6%.     

纯二氧化钛介孔分子筛的合成与表征

分别用不同链长的烷基磷酸酯和脂肪胺两类不同表面活性剂为模板剂合成了纯二氧化钛介孔分子筛（Ti-TMS1，Ti-TMS2），并用溶剂法代替高温焙烧法成功地脱除了模板剂。用 XRD、TEM等测试手段对这类材料的结构进行了表征，研究了反应条件对所制备样品的结构的影响。结果表明：得到的纯二氧化钛介孔分子筛为较规则的六角堆积排列，孔径为2.7～4.4 nm, 且其纳米孔径大小可以通过改变烷基磷酸酯模板剂的烷基链长而调节。此外还发现，采用的烷基磷酸酯模板剂的烷基链越长，制得的二氧化钛介孔分子筛结构及晶型的完整性越好。进一步的研究表明，模板剂脱除之后，Ti-TMS2结构的晶体完整性和稳定性明显不如Ti-TMS1的好，且Ti-TMS1的介孔结构优于Ti-TMS2的介孔结构。     

孔壁部分有序化的介孔二氧化硅材料的合成与表征

采用一种“改进的二次晶化”的方法处理介孔二氧化硅SBA-15. 用X射线衍射(XRD)、 透射电镜(TEM)、 电子衍射(ED)、 红外光谱(FTIR)以及固体核磁共振(NMR)等多种技术对样品进行了表征.　结果表明， 在所得样品的孔壁中, 原子的排列方式与普通介孔二氧化硅材料的孔壁不同， 显示一定程度的有序性. 同时, 高度有序的介孔结构得到很好的保持, 且样品的水热稳定性大幅度提高.     

Periodic Mesoporous Organosilica in Confined Environments

Confined tubes : Periodic mesoporous organosilica (PMO) mesophases were synthesized within the confined tubular environment of anodic alumina membrane (AAM) channels, resulting in the formation of either the hexagonal circular or the cubic mesophase.

     

硅酸钠与有机硅氧烷前驱体合成有机官能化硅基介孔材料

采用有机硅氧烷（RTES）与硅酸钠（Na2SiO3)共水解缩聚合成有机官能化的 MSU型硅基介孔材料，当前驱体中RTES和硅酸钠的摩尔比为0.1:0.9时合成了R－ MSU（R＝甲基，氨基）分子筛，通过现代分析技术证明有机官能团均进入材料骨架 。选用CH3－MSU合成体系，考察了合成温度、前驱体与模板剂摩尔比及前驱体中有 机硅氧烷含量等反应参数对材料织构性能的影响，发现通过简单地调节反应参数， 能较好地控制材料的结构和表面特性。     

Light Harvesting by a Periodic Mesoporous Organosilica Chromophore

Light aqueduct: Periodic mesoporous organosilica exhibits strong light absorption due to densely packed organic chromophores within the pore walls. Light energy absorbed by 125 biphenyl groups in the pore walls is funneled into a single coumarin 1 molecule in the mesochannels with almost 100 % quantum efficiency, and results in significant enhancement of emission from the coumarin 1 dye.

     

Synthesis and Characterization of a Novel Calix[4]arene‐Based Periodic Mesoporous Organosilica

Summary: A new calix[4]arene‐based periodic mesoporous organosilica has been synthesized using tetraethoxysilane (TEOS) and a calix[4]arene‐based silane monomer as the precursors and cetyltrimethylammonium bromide (CTAB) surfactant as the structure‐directing template, and is shown to be capable of visual detection and entrapment of NO₂.

Synthesis of the novel mesoporous organosilica material containing covalently bound tetra‐O‐alkylated calix[4]arene hosts.     

四配位Ti掺杂有机杂化介孔分子筛的直接合成与表征

以三嵌段共聚物P123为模板剂,NaCl为助剂,1,2-二(三乙氧基甲硅烷基)乙烷为硅源,在水热合成过程中引入钛源,原位一步合成了四配位Ti掺杂在骨架内的SBA-15型有机杂化介孔分子筛(Ti-PMO).利用小角X射线衍射、透射电子显微镜以及低温N2物理吸附等手段表征了Ti-PMO的晶体结构和织构性能,并利用紫外-可见漫反射光谱考察了钛源种类、钛源预水解时间、溶液酸性以及Si/Ti摩尔比对Ti存在形态的影响.研究结果表明,通过精确调控Ti-PMO的合成条件,可使钛源水解产生的低聚中间体与硅源水解产生的低聚中间体充分接触并发生共缩聚,引入的Ti原子能够最终随着水解的氧化硅物种自组装生成有序介孔结构的SBA-15型分子筛,并以四配位形式均匀分布于PMO骨架中.以Cl2TiCp2为钛源,盐酸浓度为0.18mol/L时,钛源预水解6h后加入硅源,在Si/Ti摩尔比大于20时可以得到骨架内四配位Ti掺杂的高度有序介孔结构有机杂化分子筛,其具有良好的热稳定性及水热稳定性.     

Ruthenium‐Immobilized Periodic Mesoporous Organosilica: Synthesis,Characterization, and Catalytic Application for Selective Oxidation of Alkanes

Periodic mesoporous organosilica (PMO) is a unique material that has a crystal‐like wall structure with coordination sites for metal complexes. A Ru complex, [RuCl₂(CO)₃]₂, is successfully immobilized onto 2,2’‐bipyridine (BPy) units of PMO to form a single‐site catalyst, which has been confirmed by various physicochemical analyses. Using NaClO as an oxidant, the Ru‐immobilized PMO oxidizes the tertiary C?H bonds of adamantane to the corresponding alcohols at 57 times faster than the secondary C?H bonds, thereby exhibiting remarkably high regioselectivity. Moreover, the catalyst converts cis‐decalin to cis‐9‐decalol in a 63 % yield with complete retention of the substrate stereochemistry. The Ru catalyst can be separated by simple filtration and reused without loss of the original activity and selectivity for the oxidation reactions.     

A Zinc Phthalocyanine Based Periodic Mesoporous Organosilica Exhibiting Charge Transfer to Fullerenes

Periodic mesoporous organosilica (PMO) materials offer a strategy to position molecular semiconductors within a highly defined, porous network. We developed thin films of a new semiconducting zinc phthalocyanine‐bridged PMO exhibiting a face‐centered orthorhombic pore structure with an average pore diameter of 11 nm. The exceptional degree of order achieved with this PMO enabled us to create thin films consisting of a single porous domain throughout their entire thickness, thus providing maximal accessibility for subsequent incorporation of a complementary phase. The phthalocyanine building blocks inside the pore walls were found to be well‐aggregated, enabling electronic conductivity and extending the light‐harvesting capabilities to the near IR region. Ordered 3D heterojunctions capable of promoting photo‐induced charge transfer were constructed by impregnation of the PMO with a fullerene derivative. When integrated into a photovoltaic device, the infiltrated PMO is capable of producing a high open‐circuit voltage and a considerable photocurrent, which represents a significant step towards potential applications of PMOs in optoelectronics.     

立方介孔相含钇氧化硅的合成与表征

以低浓度的十六烷基三甲基溴化铵为结构导向剂,在碱性条件下通过水热法合成了具有立方结构的含钇Y MCM 48介孔分子筛材料。XRD测试表明当Y/Si<0.05时可以获得典型的长程有序介孔立方结构相,随Y/Si比的增加,晶胞参数的增大和红外吸收光谱(FTIR)的变化为Y进入介孔分子筛骨架中提供了有力证据。N2吸附-脱附实验给出这种立方介孔材料的BET表面积为1180m2·g-1,BJH平均孔径为3.4nm。紫外 可见漫反射光谱(UV vis)证明钇以一种六配位的形式存在。X射线光电子能谱(XPS)进一步证明钇以三价形式存在于立方介孔分子筛骨架中。     

Platinum-Imidazolyl Schiff Base Complexes Immobilized in Periodic Mesoporous Organosilica Frameworks as Catalysts for Hydrosilylation

An imidazolyl Schiff base-containing periodic mesoporous organosilica (PMO) was synthesized via co-condensation reactions between a newly prepared bis (imidazolyl)imine-bridged bis silane and tetraethyl orthosilicate in the presence of cetyltrimethyl ammonium bromide as a soft template. The resultant as-synthesized PMO was then employed as a solid support for platinum catalysts. This complex was fully characterized via various techniques including FTIR, solid-state¹³C NMR, and ²⁹Si-NMR spectroscopy, as well as N₂ adsorption/desorption analysis, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and transmission electron microscopy (TEM) methods. In addition, the catalyst was proven to efficiently mediate hydrosilylation reactions between olefins and hydrosilanes, and it can be reused for at least five cycles without significant loss of activity.     

Mesoporous Silica and Organosilica Films Templated by Nanocrystalline Chitin

Liquid crystalline phases can be used to impart order into inorganic solids, creating materials that mimic natural architectures. Herein, mesoporous silica and organosilica films with layered structures and high surface areas have been templated by nanocrystalline chitin. Aqueous suspensions of spindle‐shaped chitin nanocrystals were prepared by sequential deacetylation and hydrolysis of chitin fibrils isolated from king crab shells. The nanocrystalline chitin self‐assembles into a nematic liquid‐crystalline phase that has been used to template silica and organosilica composites. Removal of the chitin template by either calcination or sulfuric‐acid‐catalyzed hydrolysis gave mesoporous silica and ethylene‐bridged organosilica films. The large, crack‐free mesoporous films have layered structures with features that originate from the nematic organization of the nanocrystalline chitin.