Spectrophotometric study of the chelate of palladium(II) with methylthymol blue

Methylthymol blue reacts very sensitively with palladium(II) to form two complexes. The 1:1 complex has λ_max at 530 nm in acidity range 0.02 to 0.05 M with respect to perchloric acid and 1:2 (metal reagent ratio) complex at 500 nm in pH range 6.8 to 7.5. Optimum conditions including the range for adherence to Beer's law, effect of pH, effect of excess reagent and sensitivity are reported for the photometric determination of palladium using methylthymol blue.     

The Spectrophotometric Determination of Gallium (III) with Glycine Thymol Blue

The reaction between gallium (III) and glycine thymol blue has been studied spectrophoptometrically in order to establish the optimum conditions for determining traces of gallium. The gallium (III) glycine thymol blue complex has an absorption maximum at 560 nm against a reagent blank and is stable between pH 4.0 and 5.5. The complex has a composition 1 : 2 and a formation constant of 6.4×10⁷ under the conditions studied. Beer's law is obeyed upto 126 μg of gallium. The net molar absorptivity has been found to be 11,000. The present method is very sensitive and rapid. Anions such as citrate and tartrate inhibit the colour development of the complex.     

A highly sensitive spectrophotometric determination of palladium with chromal blue g and cetyltrimethylammonium chloride

A new spectrophotometric method for the determination of palladium with chromal blue G (Color Index 43835) and cetyltrimethylammonium chloride is described. The sensitivity of the color reaction between palladium and chromal blue G is greatly increased in the presence of cetyltrimethylammonium chloride. The palladium complex has maximal absorbance at pH 3.2–3.8 and at 670 nm. Beer's law is obeyed over the range 0.08–1.4 p.p.m. palladium; the molar absorptivity is 1.01 · 10⁵ l mol^-1 cm^-1 at 670 nm and the sensitivity is 1·10^-3 μg Pd cm^-2. The mole ratio of palladium and chromal blue G in the complex in the presence of cetyltrimethylammonium chloride is 1:3. Only scandium interferes when sodium fluoride is used as masking agent.     

2-Methyl-1, 4-Naphthoquinone Thiosemicarbazone as a Sensitive and Selective Chromogenic Reagent for Microdetermination of Palladium (II)

A simple, sensitive and selective procedure has been developed for the spectrophotometric determination of palladium. Palladium (II) reacts with 2-methyl-1,4-naphthoquinone thiosemicarbazone to form an orange brown complex in the pH range 8.2–9.5. The sensitivity, in terms of Sandell's definition, is 0.0025 μg Pd/cm² at 500 nm. The system adheres to Beer's law upto 2.66 ppm of palladium and optimum concentration range for the determination of the metal is 0.3–2.29 ppm with molar absorbtivity of 4.2×10⁴ ? mole^?1 cm^?1. The complex has 1:1 molar composition, as deduced by Job's method. The determination of palladium has been carried out in presence of foreign ions especially in presence of eighth group metals.     

Direct Spectrophotometric Determination of Calcium in Human Serum and Cerebrospinal Fluids with Amino G Acid Chlorophosphonazo

ABSTRACT

A novel spectrophotometric method based on amino G acid chlorophosphonazo (AGCPA) has been developed for measuring calcium in human serum and cerebrospinal fluids. The effects of experimental factors including pH, reagent concentrations, and interfering species on calcium determinations were investigated. In a neutral reaction media of pH 7.0, AGCPA reacts rapidly with calcium to form a stable and greenish blue complex, whose absorption maximum is at 670 nm. The molar absorptivity (?) of the complex is 7.2x10⁴ 1 mol^?1cm^?1, and the molar ratio of calcium to AGCPA in the complex is found to be 1:2. Beer's law is obeyed over the range 0.02-0.8 μg ml^?1 of calcium. No interferences were observed from the commonly coexisting species present in serum and cerebrospinal fluids. Compared to the reported and currently often used methods based on o-cresolphthalein complexone, arsenazo III and methylthymol blue, the proposed method in this work provides better analytical characteristics such as high sensitivity, good selectivity and neutral reaction media. In addition, the present method is simple and can be applied to the direct determination of calcium in human serum and cerebrospinal fluid samples with satisfactory results.     

Analytical applications of 3-(2′-thiazolylazo)-2,6-diaminopyridine: Spectrophotometric determination of palladium

3-(2′-Thiazolylazo)-2,6-diaminopyridine reacts with palladium(II) in strongly perchloric acid media, to produce a blue 1:1 complex (λ_max = 665 nm, ? = 1.37 × 10⁴ liters · mol^?1 · cm^?1), which allows the spectrophotometric determination of 0.6 to 4.5 ppm of palladium. The method is applied to the determination of palladium in small samples of hydrogenation catalysts.     

A highly selective and sensitive colorimetric chemosensor based on polyurethane foam impregnated with 3-methyl-2, 6-dimercapto-1,4-thiopyrone for on-site preconcentration and determination of palladium(II)

ABSTRACT

A new sorbent and chemosensor for highly selective and sensitive on-site preconcentration and colorimetric determination of Pd(II) was developed based on its reaction with 3-methyl-2,6-dimercapto-1,4-thiopyrone (MDT) immobilised onto polyurethane foam (PUF). Complexation of Pd(II) with MDT sorbed on PUF tablets leads to a contrast change in the sorbent colour from pale yellow to reddish-brown. The developed chemosensor is highly selective with respect to the transition and platinum group metals. It has a maximum sorption capacity of 17 µmol g^?1 for Pd(II). Reaction is possible in a strongly acidic medium (up to10 M HCl), and the properties of the chemosensor do not change during storage for a long time. The colorimetric response of the chemosensor was measured using red–green–blue (RGB) colour model. The dependence of the luminosity of the G channel on the Pd(II) concentration was linear in the concentration range from 0.3 to 64 µg L^?1 with a detection limit of 0.1 µg L^?1 (R² = 0.997). The colour scale for visual detection of Pd(II) was constructed in the concentration range of 0.02–0.64 mg L^?1 for the sorption from 20 mL of an aqueous sample. The accuracy of the developed methods was assessed by the analysis of a certified reference material (platinum–palladium alloy) and by comparison with the results of gravimetric or graphite furnace atomic absorption spectrometry (GFAAS) determination of Pd. The developed method was successfully applied to determine Pd in samples of mine water and road dust, in the electrolyte bath and in the sewage sludge of a palladium electroplating bath.     

Analytical study of the phenyl-2-pyridyl ketone azine-palladium system. Photometric determination of palladium

Phenyl-2-pyridyl ketone azine reacts with palladium(II) to produce a yellow 1:1 complex (λ_max = 425 nm, ? = 10.4 × 10³M^?1 cm^?1 in aqueous ethanolic solution) and a red-violet 3:1 complex (λ_max = 530?540 and 380?390 nm). The yellow complex in aqueous ethanolic solution has been used for the spectrophotometric determination of trace amounts of palladium. The method has been applied to the determination of palladium in some catalysts and one mineral.     

Spectrophotometr1c determination of palladium : Bismuthiol i as an analytical reagent

The reagent, bismuthiol l, has been successfully utilized for the spectrophotometric determination of palladium. The colour reaction is instantaneous and the system is stable for at least 24 hours in the pH range 6 to 10 but shows no sharp peak of maximum absorption. The system obeys Beer's law at a palladium concentration of 0.8 μg to 8.0 μg per ml at any wavelength between 400 mμ and and 410 mμ giving a sensitivity of 0.08 μg of palladium per cm² (practical); 0.01 μg of palladium per cm² (sandell). Ethyl alcohol stabilizes the system against any deviation due to appearance of turbidity. A large excess of the reagent and almost all thc cations and anions, except platinum, gold, copper, chromium, iron, mercury, silver, thallium, uranium, vanadate and cyanide, do not interfere. By applying job's method of continuous variation it was found that the complex contains thc reactants in 1 : 1 ratio and that the average value of the dissociation constant of the complex is 3.2$\text{.}\text{?}$ 10^-5 at 25°.     

Synthesis and characterization of N-heterocyclic carbene palladium complex and its application on direct arylation of benzoxazoles and benzothiazoles with aryl bromides

A mixed-halogen bis(1-(4-tert-butylbenzyl)-3-(2, 4, 6-trimethylbenzyl)-1H-benzo[d]imidazol-2-ylidene) palladium(II) complex, trans-[Pd(Cl_0.7Br_0.3)₂(C₂₈H₃₂N₂)₂], has been synthesized and characterized by elemental analysis, ¹H-NMR, ¹³C-NMR, and IR spectroscopy, and single crystal X-ray diffraction. The palladium in the mononuclear complex is four-coordinate in a square-planar configuration with two carbenes of two benzo[d]imidazole rings and two halides. The two halides are disordered between Br and Cl, with the Cl: Br ratio approximately 0.7 : 0.3. The angles C1–Pd1–Br1, 88.63(11)° and C1ⁱ–Pd1–Br1ⁱ, 91.37(11)° (i: 1?x, 1?y, 1?z) in the coordination sphere are very close to the ideal value of 90°. The Pd–X distance is slightly longer than other carbene derivative Pd–Cl single bond distances and slightly shorter than Pd–Br single bond distances. These results agree with the Cl/Br disorder at the halogen position. The palladium–carbene complex was tested as a catalyst in the direct arylation reaction of benzoxazoles and benzothiazoles with aryl bromides.     

Palladium(II) complexes of aliphatic amines and their oxidation by chloramine‐T in perchloric acid medium

The formation of palladium(II) complexes with aliphatic amines and their oxidation by chloramine‐T in perchloric acid medium has been studied. The spectrophotometric studies showed the formation of 1:1 and 1:2 complexes between palladium(II) and amine in absence of HClO₄. An increase in [HClO₄] in reaction mixture suppresses the complex formation and in presence of [HClO₄] ～10^?3 mol dm^?3 only a 1:1 complex between palladium(II) and amine has been observed. The effect of Cl^? on the complex formation has also been studied. Palladium(II)‐catalyzed oxidation of these amines by chloramine‐T showed a first‐order dependence of rate with respect to each—oxidant, substrate, catalyst, and H⁺. The mechanism consistent with kinetic data for the oxidation process has been proposed in absence as well as in presence of initial [Cl^?]. © 2002 Wiley Periodicals, Inc. Int J Chem Kinet 34: 603–612, 2002     

Reduction of palladium(II) monoglycinate complexes at rotating disc palladium electrode in acid media

Reduction of palladium(II) glycinate complexes in strongly acid 0.5 M NaClO₄ solutions (pH 0.6 and 1.0) with variable palladium(II) complex and free glycine concentration was studied by the taking of cyclic voltammograms at palladium rotating disc electrode. It is shown that it was a chelate monoglycinate palladium(II) complex that was present in all studied solutions and underwent the reduction. The diffusion coefficient of the chelate monoglycinate palladium(II) complex D = (6.5 ± 0.5) × 10⁻⁶ cm²/s was determined from the limiting diffusion current of the complex reduction. The monoglycinate palladium(II) complex reduction occurred in the double-layer segment of the palladium charging curve; it was not complicated by hydrogen adsorption at electrodes. The palladium(II) complex reduction half-wave potential was determined (E _1/2 = ∼0.300 to 0.330 V (SCE)). It is shown that the decreasing of the number of ligands coordinated by palladium via nitrogen atom facilitates the complex reduction process. In particular, the reduction potentials of palladium(II) complexes with different ligand number at palladium electrode shifted markedly toward negative potentials in the series: Pdgly⁺ < Pd(gly)2 < Pd(gly)₄²⁻.     

Multivariate optimisation of a rapid and simple automated method for bismuth determination in well water samples exploiting long path length spectrophotometry

An automated spectrophotometric system is proposed for the determination of bismuth in well water samples, using multi-syringe flow injection analysis (MSFIA) and exploiting a liquid waveguide capillary cell (LWCC). This method is based on the colorimetric reaction of bismuth and methylthymol blue (MTB) in the presence of polyvinylpyrrolidone (PVP) in acid medium (0.1 mol L^?1 HNO₃). The Bi(III)–MTB complex was measured at 600 nm. The method was optimised by multivariate techniques. Some figures of merit of the proposed system are worth being highlighted, such as its wide linear working range (between 4.9 and 600 μg L^?1), its low detection limit (1.5 μg L^?1 of bismuth) and its high intra-day precision and inter-day precision (0.7% (n = 12) and 1.4% (n = 5), respectively, both expressed as RSD). Moreover, a high injection frequency of 30 h^?1 is achieved, as the proposed analyser is a powerful tool for fast Bi(III) determination. The method developed was successfully validated by analysing reference samples (pharmaceutical samples) by comparing the results with those obtained by ICP-OES and it was satisfactorily applied to well water samples. Besides, the present system is miniaturised allowing in situ measurements in control processes and field analysis.     

Spectrophotometric determination of sulphate in sodium hydroxide solutions by flow-injection analysis

A spectrophotometric flow-injection procedure is described for the determination of sulphate in sodium hydroxide solutions. Sulphate catalyses the reaction between zirconium and methylthymol blue to form a complex measured at 586 nm. Optimal reaction conditions are discussed. The calibration graph is linear over the range 0.05–0.5 g l^?1 sulphate with a relative standard deviation of 0.02. The sample throughput is 20 h^?1. Sulphate is easily determined in 1 M sodium hydroxide; the results agree with those obtained by the conventional gravimetric method and by ion chromatography.     

Spectrophotometric Determination of Palladium(II) with n-Hydroxy-N,N-Diphenylbenzamidine and 1 -(2-Pyridylazo)-2-Naphthol

A spectrophotometric method to determine palladium(II) at trace levels is based on the extraction of palladium(II) as a binary complex with N-hydroxy-N,N′-diphenylbenzamidine (HDPBA) in chloroform at pH 5.0 ± 0.2. The complex shows maximum absorbance at 400 nm with molar absorptivity 6.4 × 10³ L mol^?1 cm^?1. The sensitivity of the Pd(II)-HDPBA complex was enhanced by the addition of l-(2-pyridylazo)-2-naphthol (PAN). The green coloured complex shows maximum absorbance at 620 nm with molar absorptivity 1.58 × 10⁴ L mol^?1 cm^?1. Sandell's sensitivity and the detection limit of the method are 0.0067 μg cm^?2and 0.1 μg Pd(II) mL^?1, respectively. Most common metal ions associated with palladium metal do not interfere. The effects of various analytical parameters on the extraction of the metal are discussed.     

Mixed Ligand Complexes of Palladium (II) with Diethylenetriamine as Primary Ligand and Peptides as Secondary Ligand

Solution equilibria of the system palladium (II)-diethylenetriamine (dien) and peptides have been studied. The pH-metric titration of the reaction mixture containing equimolar solutions of palladium (II), dien and peptide have shown the formation of 1:1:1 mixed ligand complex. The pK_e of the peptides studied and formation constants of the resulting complexes have been determined at 25°C. The mode of chelation has been deduced from the conductivity measurements.     

Oxoanionic Noble Metal Compounds from Fuming Nitric Acid: The Palladium Examples Pd(NO3)2 and Pd(CH3SO3)2

The oxidation of elemental palladium at 100 °C in a mixture of fuming nitric acid and a pyridine‐SO₃ complex leads to the anhydrous nitrate Pd(NO₃)₂ (monoclinic, P2₁/n, Z=2, a=469.12(3) pm, b=593.89(3) pm, c=805.72(4) pm, β=105.989(3)°, V=215.79(2) ų). The Pd²⁺ ions are in square‐planar coordination with four monodentate nitrate groups which are connected to further palladium atoms, leading to a layer structure. The reaction of elemental palladium with a mixture of fuming nitric acid and methanesulfonic acid at 120 °C leads to single crystals of Pd(CH₃SO₃)₂ (monoclinic, P2₁/n, Z=2, a=480.44(1) pm, b=1085.53(3) pm, c=739.78(2) pm, β=102.785(1)°, V=376.254(17) ų). Also in this structure the Pd²⁺ ions are in square‐planar coordination with four monodentate anions; however, the connection to adjacent palladium atoms leads to a chain‐type structure. The thermal decomposition of the compounds has been investigated by means of DSC/TG measurements. Furthermore, IR and Raman spectra have been recorded, and an assignment of the observed vibrational frequencies has been carried out based on theoretical investigations.     

Spectrophotometric Determination of Cobalt,Nickel and Palladium after Extraction with Thioxanthate into Molten Naphthalene

Cobalt, nickel and palladium have been extracted with thioxanthate into molten naphthalene (85–90°C). Various parameters involved in the extraction have been studied and composition of the extracted complex established in each case. Cobalt. nickel and palladium thioxanthates are extracted in the pH range, Co: 5.0–9.5. Ni: 3.9–7.4 and Pd: 2.0–9.5 and can be determined spectrophotometrically at 390. 500 and 345 nm respectively. The molar absorptivities are calculated to be Co: 6.187×10³ ? mol^?1 cm^?1, Ni: 8.8×10³ ? mol^?1 cm^?1 and Pd: 1.16×10⁴ ? mol^?1 cm^?1 with sensitivities in terms of Sandell's defication are; 0.0095 μg Co/cm² at 390 nm, 0.0060 μg Ni/cm² at 500 nm and 0.0091 μg Pd/cm² at 345 nm respectively. These conditions have been utilized for the determination of these metals in alloys and also for the simultaneous determination of cobalt and nickel in an alloy.     

Mixed Ligand Palladium(Ⅱ) Complex with NS-Bidentate S-Allyldithiocarbazate Schiff Base: Synthesis, Spectral Char-acterization, Crystal Structure and Decoding Intermolecular Interactions with Hirshfeld Surface Analysis

A new mixed ligand palladium(II) complex with bidentate NS‐donor chelate, [PdCl(PPh₃)L] (L: S‐allyl β‐N‐(benzylidene)dithiocarbazate), has been prepared and characterized using single crystal X‐ray diffraction and spectroscopic (electronic, IR, ¹H NMR and ¹³C NMR) techniques. The shorter Pd? P bond distance, 2.255(7) Å, than the sum of the single bond radii for palladium and phosphorus (2.41 Å), showed partial double bond character. Visualizing and exploring the crystal structure using Hirshfeld surface analysis showed the presence of π··· π, N··· π, C? H··· π, Cl···H and weak C? H···S interactions as most important intermolecular interactions in the crystal lattice, which are responsible to extension of the supramolecular network of the compound and stabilization of the crystal structure.     

Supramolecular Recognition: Use of Cofacially Disposed Bis‐terpyridyl Square‐Planar Complexes in Self‐Assembly and Molecular Recognition

A molecular receptor consisting of a molecular spacer that constrains two terpyridyl‐palladium(II) complexes to be disposed in a parallel cofacial geometry has been prepared. The separation between the two terpyridyl‐palladium units is enforced to be ca. 7 Å, a distance sufficient to incarcerate aromatic molecules and square‐planar complexes. A number of molecules are shown to associate with this spacer‐chelator complex. In particular, 9‐methylanthracene (9‐MA) is found to form a 1 : 2 host‐guest complex. A crystal structure of this complex shows one 9‐MA in the molecular cleft formed by the two terpyridyl‐palladium units and the other 9‐MA molecule to lie above one of the terpyridyl‐palladium units. Nuclear Overhauser effects on analogous molecules that contain two anthracene guests tethered intramolecularly indicate that the structure found in the solid is similar to that in solution. Low‐temperature ¹H‐NMR studies indicate rapid exchange between the two binding sites. The spacer‐chelator complexes, when combined with appropriate molecular linkers, readily form molecular rectangles, trigonal prisms, and tetragonal prisms. One molecular rectangle is shown to associate with up to five 9‐MA molecules.