Electrochemical determination of acetaminophen in the presence of propranolol using an electrode modified with a Schiff base from 2-hydroxy-1-naphthaldehyde and ethylenediamine and multi-walled carbon nanotubes

A carbon paste electrode, modified with N,N′-bis-(2-hydroxy-1-naphthalidene)ethylenediamine and multi-walled carbon nanotubes (HNED-MWCNPE), was used for the determination of acetaminophen (ACOP) and propranolol (PP). Cyclic voltammetry (CV), chronocoulometry, chronoamperometry and differential pulse voltammetry (DPV) techniques were employed to study electro-oxidation of ACOP. The results revealed that the modified electrode showed an electrocatalytic activity toward the anodic oxidation of acetaminophen by a marked enhancement in the current response in buffered solution at pH 8.0. Some kinetic parameters such as the electron transfer coefficient (α) were also determined for the ACOP oxidation. The linear concentration range of 1 × 10^?3?1 × 10^?6 M with a detection limit of 4.6 × 10^?8 M (n = 16) for ACOP was obtained using DPV (pH 8.0). The modified electrode shows good sensitivity, selectivity and stability. The prepared electrode was also applied for the determination of ACOP in human blood serum.     

Glassy carbon electrode modified with hemin and new melamine compounds for H<Subscript>2</Subscript>O<Subscript>2</Subscript> amperometric detection

In an attempt to increase the stability and efficiency of hemin-modified electrodes, the present work reports the preparation of a new modified glassy carbon electrode obtained by immobilization of hemin (Hm) on the electrode surface together with a new N-substituted melamine (2,4,6-triamino-1,3,5-triazine) based G-2 dendrimer comprising p-aminophenol as peripheral unit (Den) or with one of its analogues, a melamine G-0 dimer (Dim). Basic structural features, able to determine intimate relationships between Hm and Dim (or Den) at room temperature in solid state, were evidenced with the use of vibrational analysis carried out by FT-IR. This method revealed contacts between Hm and Dim or Den respectively as H-bond interactions, proton-interchange, and π-π stacking interactions. The new modified electrodes were characterized by cyclic voltammetry and electrochemical impedance spectroscopy and tested for amperometric detection of H₂O₂. In this purpose, GC/Hm-Dim electrode exhibited better catalytic properties than GC/Hm-Den electrode, but lower stability.     

Voltammetric determination of paracetamol at NiO nanoparticles-modified carbon paste electrode in bulk and tablet dosage forms

Nickel oxide (NiO) nanoparticles were synthesized by a rapid method and well characterized. The nanoparticles were then used with graphite powder to prepare modified carbon paste electrode (CPE/NiO) for electrocatalytic oxidation of paracetamol (AC). The CPE/NiO showed higher electrocatalytic activity than nickel rod electrode in electrocatalytic oxidation of AC in alkaline media. The assay of AC, mechanism and kinetics of the electrooxidation process were investigated by cyclic voltammetry and chronoamperometry. The catalytic rate constant and the charge transfer coefficient of AC electrooxidation by the active nickel species and the diffusion coefficient of AC were also reported. The linear dependence of the peak current on the concentration of the AC was observed in the range 2–14 mM. This procedure was successfully applied to the determination of AC in tablets. The results showed sufficient precision, accuracy and achieved a mean recovery of 97.2% (RSD = 6.7%).     

Preparation of Pt/MWCNTs Catalyst by Taguchi Method for Electrooxidation of Nitrite

Abstract—The Pt nanoparticles-functionalized multiwall carbon nanotubes (f-MWCNTs) modified glassy carbon electrodes were used to study the electrooxidation of nitrite. Pt nanoparticles were electrodeposited on the f-MWCNTs modified glassy carbon (GC) electrode by applying a constant potential to the electrode for a specific time. By applying optimized conditions (using Minitab software), Pt/MWCNTs/GC electrode was prepared by immobilizing 40 μL of f-MWCNTs on the GC electrode and applying a potential of–0.20 V vs. Ag/AgCl for 120 s. The electrooxidation of nitrite was studied on the prepared electrode in 0.1 M KCl solution. The amperometric response of the prepared electrode linearly changes with the concentration of nitrite from 4.0 μM to 2.4 mM. The detection limit of the electrode was found to be 1.5 μM (S/N = 3) with a sensitivity of 28.7 μA/mM.     

Graphene sheet for improving the electrocatalytic activity of a benzofuran derivative modified electrode for determination of epinephrine in the presence of serotonin

A nanocomposite system based on coumarin derivative and graphene sheet was used to prepare a new electrochemical sensor. The objective of the mentioned nanocomposite was to investigate novel electrochemical properties enabling the quantification of epinephrine (Ep). Cyclic voltammetry was used to study the redox properties of the mentioned modified electrode at different scan rates. Henceforward, the electrocatalytic oxidation of Ep at the surface of the modified electrode was considered. The data has shown excellent catalytic activity of the modified electrode for the electrooxidation of Ep, which leads to a reduction of overpotential for more than 238 mV. According to differential pulse voltammetry (DPV), the oxidation of Ep showed a dynamic range between 0.1 and 1000.0 μM and the detection limit (3s) of 0.011 μM. Besides, DPV was used for the determination of Ep at the mentioned modified electrode in the presence of serotonin.     

Anodic stripping voltammetric determination of silver ion at a carbon paste electrode modified with carbon nanotubes

A carbon paste electrode (CPE) was modified with multi-wall carbon nanotubes and successfully applied to the determination of silver ion by differential pulse anodic stripping voltammetry. Compared to a conventional CPE, a remarkably improved peak current response and sensitivity is observed. The analytical procedure consisted of an open circuit accumulation step for 2?min in ?0.4?V, this followed by an anodic potential scan between +0.2 and?+?0.6?V to obtain the voltammetric peak. The oxidation peak current is proportional to the concentration of silver ion in the range from 1.0?×?10^?8 to 1.0?×?10^?5?mol?L^?1, with a detection limit of 1.8?×?10^?9?mol?L^?1 after an accumulation time of 120?s. The relative standard deviation for 7 successive determinations of Ag(I) at 0.1???M concentration is 1.99%. The procedure was validated by determining Ag(I) in natural waters.

Electrocatalytic determination of penicillamine using multiwall carbon nanotubes paste electrode and chlorpromazine as a mediator

In this study, we describe the application of carbon paste electrode modified with multiwall carbon nanotubes as a voltammetric sensor for determination of penicillamine (PA) in the presence of chlorpromazine as a mediator. This modified electrode showed very efficient electrocatalytic activity for the anodic oxidation of PA. The peak current of linear sweep voltammograms of PA increased linearly with it’s concentration in the range of 0.5–500 μM PA. The detection limit for PA was 0.2 μM. The RSDs for 1.0 and 10.0 μM PA were 1.1 and 1.7%, respectively. The proposed sensor was successfully applied for the determination of PA in human urine and tablet.     

Polymer matrices with molecular memory as affine adsorbents for the determination of myoglobin as a cardiac marker of acute myocardial infarction by voltammetry

A possibility of myoglobin determination using screen-printed graphite electrodes modified with a poly(o-phenylenediamine)-based molecularly imprinted polymer (MIP) obtained by the electropolymerization of o-phenylenediamine monomer molecules on the surface of a screen-printed graphite electrode in the presence of myoglobin template molecules is considered. It is shown that the conjugation of MIP with multiwall carbon nanotubes (MWCNT) results in an increase in the sensitivity of the MIP-biosensor in the electrochemical determination of myoglobin by the direct registration of the reduction peak of hemoprotein Fe³⁺ by square wave voltammetry on screen-printed graphite electrodes modified with MWCNT/MIP and MIP. Equilibrium dissociation constants K _d for the interaction of myoglobin with MWCNT/MIP- and MIP-electrodes, which equaled (9.8 ± 2.6) × 10^–11 and (2.4 ± 0.5) × 10^–8 M, respectively, are calculated. It is shown that the sensitivity of the electrochemical MWCNT/MIP-biosensor for myoglobin determination (1.5 × 10^–2 A/nmol of myoglobin) is higher than that of the MIP-biosensor (2.0 × 10^–4 A/nmol of myoglobin).     

Voltammetric sensors based on gel composites containing carbon nanotubes and an ionic liquid

Possibilities of using electrode coatings based on a gel of carboxylated multiwall carbon nanotubes (MWCNTs) in an ionic liquid (1-butyl-3-methylimidazolium hexafluorophosphate, [BMIm]PF₆) for the creation of a voltammetric sensor with electrocatalytic properties with respect to the pharmacological group of catecholamines—levodopa, methyldopa, and carbidopa—are considered. Using cyclic voltammetry, it was found that a glassy carbon electrode coated with a thin layer of an MWCNT–[BMIm]PF₆ gel or an MWCNT–[BMIm]PF₆–Nafion gel-composite induced a decrease in overvoltage (~60 mV), improved the reversibility of the redox reaction, and increased oxidation currents of the studied substances in comparison with an unmodified glassy carbon electrode. The concentration dependence of the analytical signal was linear in the ranges of 1–250, 2–350, and 5–400 mM for carbidopa, levodopa, and methyldopa, respectively. In the determination of the specified substances in diluted urine samples and tableted drugs, the accuracy index was 98–102% and the relative standard deviation, 0.3–5% (n = 5, P = 0.95).     

Anodic stripping voltammetry of silver(I) using a carbon paste electrode modified with multi-walled carbon nanotubes

We describe a silver(I)-selective carbon paste electrode modified with multi-walled carbon nanotubes and a silver-chelating Schiff base, and its electrochemical response to Ag(I). Effects of reduction potential and time, accumulation time, pH of the solution and the stripping medium were studied by differential pulse anodic stripping voltammetry and optimized. The findings resulted in a method for the determination of silver over a linear response range (from 0.5 to 235 ng?mL^?1) and with a detection limit as low as 0.08 ng?mL^?1. The sensor displays good repeatability (with the RSD of ±?2.75 % for 7 replicates) and was applied to the determination of Ag(I) in water samples and X-ray photographic films.

Electropolymerization of N,N-dimethylaniline in presence of sodium dodecyl sulfate and its electrochemical properties

Poly(N,N-dimethylaniline) (PDMA) was formed by successive cyclic voltammetry in monomer solution in the presence of sodium dodecyl sulfate (SDS) on the surface of a carbon paste electrode. The polymerization behavior of N,N-dimethylaniline in the presence of SDS is quite different from that of N,N-dimethylaniline in the absence of SDS. The effect of varying amount of SDS on the rate of polymerization of N,N-dimethylaniline was investigated. The electrochemical behavior of the SDS-PDMA carbon paste electrode has been investigated by cyclic voltammetry in 0.5 M H₂SO₄ and 5 mM K₄[Fe(CN)₆]/0.1 M KCl solutions as the supporting electrolyte and model system, respectively. The synthesized PDMA was characterized by FT-IR and scanning electron microscopy (SEM). Ni(II) ions were incorporated into the electrode by immersion of the polymeric modified electrode having amine groups in 0.1 M Ni(II) ion solution. The electro catalytic oxidations of methanol at the surface of the Ni/SDS-PDMA electrode were studied in a 0.1 M NaOH solution. Compared to bare carbon paste and PDMA-modified carbon paste electrodes; the SDS-PDMA electrode significantly enhanced the catalytic efficiency of Ni ions for methanol oxidation.     

Nanostructure-based electrochemical sensor for determination of glutathione in hemolysed erythrocytes and urine

A sensitive and selective electrochemical method was developed for the determination of glutathione (GSH) in hemolysed erythrocyte using vinylferocene modified carbon nanotubes paste electrode (VFMCNTPE). The results indicate that the electrode is efficient in terms of its electrocatalytic activity for the oxidation of GSH, leading to a reduced overpotential by more than 470 mV. Also, the values of catalytic rate constant (k), and diffusion coefficient (D) for GSH were calculated. The electrocatalytic oxidation peak current of GSH showed two linear dynamic ranges with a detection limit of 0.09 μM GSH. The linear calibration ranges were obtained between 0.2–4.0 and 4.0–250.0 μM GSH using square wave voltammetry (SWV) method. The proposed method was also examined as a selective, simple and precise electrochemical sensor for the determination of GSH in real samples such as urine and hemolysed erythrocyte.     

Determination of thiourea using a carbon paste electrode decorated with copper oxide nanoparticles

We report on a novel sensor for the electrochemical determination of thiourea (TU). It is based on an active carbon paste electrode modified with copper oxide nanoparticles. The modified electrode and the electrochemical properties of thiourea on its surface were investigated using cyclic voltammetry and differential pulse voltammetry. Under optimized conditions, the detection limit is 20 μg?L^?1 of TU. The method was applied to the determination of thiourea in fruit juice, orange peel and industrial waste water.

Kinetics and mechanism of the electrochemical reduction of [1,2-bis(tert-butylperoxy)ethyl]benzene under conditions of the in situ recovery of a platinum surface

The behavior of [1,2-bis(tert-butylperoxy)ethyl]benzene (I) on Pt electrode is studied by means of cyclic voltammetry (CVA). A comparison of the electrochemical properties of I and the properties of previously studied bridge-type 1,2,4,5-tetraoxane ((1,4)-1,4-dimethyl-7-(4-methylbenzyl)-2,3,5,6-tetraoxabicyclo[2.2.1]heptane) (II) shows that the biperoxide studied in this work is reduced on a Pt electrode at lower cathodic potentials and is resistant to electrooxidation.     

Lead ion sensor with electrodes modified by imidazole-functionalized polyaniline

Glassy carbon electrodes (GCE) and carbon paste electrodes (CPE) were modified with imidazole functionalized polyaniline with the aim to develop a sensor for lead (II) in both acidic and basic aqueous solution. The electrodes were characterized by cyclic voltammetry and differential pulse adsorptive stripping voltammetry. The limit of detections obtained with glassy carbon electrode and carbon paste electrode are 20?ng?mL^-1 and 2?ng?mL^-1 of lead ion, respectively. An interference study was carried out with Cd(II), As(III), Hg(II) and Co(II) ions. Cd(II) ions interfere significantly (peak overlap) and As(III) has a depressing effect on the lead signal. The influence of pH was investigated indicating that bare and modified GCE and CPE show optimum response at pH?4.0 ± 0.05.

Sensitive determination of ATP using a carbon paste electrode modified with a carboxyl functionalized ionic liquid

We report on a new electrode for the determination of adenosine-5??-triphosphate (ATP). It is based on modified carbon paste electrode that contains an ionic liquid (IL) as the binder. The electrode shows strong electrocatalytic oxidative activity towards ATP at pH 4.5 in giving a well-defined single oxidation peak. The oxidation reaction is adsorption-controlled and due to the presence of the highly conductive IL. The electron transfer rate constant was calculated to be 2.04×10^?C3 s^?C1, and the surface coverage is 1.11×10^?C10 mol cm^?C2. Under the selected conditions, the oxidation peak current changes linearly with the concentration of ATP in the range from 5.0 to 1000???mol L^?1 and a detection limit of 1.67???mol L^?1 (3???) as determined by differential pulse voltammetry. The method displays good selectivity and was applied to the determination of ATP injection samples with satisfactory results.

Electrochemical sensor for Baicalein using a carbon paste electrode doped with carbon nanotubes

We report on the voltammetric determination of the flavonoid Baicalein by using a carbon paste electrode that was doped with multi-walled carbon nanotubes. The resulting sensor exhibits excellent redox activity towards Baicalein due to the large surface area and good conductivity of the electrode. Cyclic voltammetry at various scan rates was used to investigate the redox properties of Baicalein. At the optimum conditions, the sensor displays a linear current response to Baicalein in the 0.02–10 μM concentration range, with a limit of detection of 4.2 n M. The method was successfully applied to the determination of Baicalein in spiked human blood serum samples and in a Chinese oral liquid.

Mechanism of the anodic dissolution of gold in solutions of 6-alkyl-1,5-diazabicyclo[3.1.0]hexanes

The electrochemical corrosion of gold in solutions of 6,6-dimethyl-1,5-diazabicyclo[3.1.0]hexane (I) and 6-methyl-1,5-diazabicyclo[3.1.0]hexane (II) on a gold electrode is studied via cyclic voltammetry. It is shown that the galvanostatic electrolysis of weakly basic aqueous solutions of I and II on gold anodes results in the corrosion of Au electrodes, probably with the formation of organic complexes of gold that are reduced to form a gold mirror on the inner surface of an electrochemical cell during electrolysis. A mechanism is proposed for the investigated processes.     

Examination of incubation time of bare gold electrode inside cysteamine solution for immobilization of multi-walled carbon nanotubes on a gold electrode modified with cysteamine

A cysteamine (CysAm) nanostructure was generated to act as an intermediate layer between gold electrode and carbon nanotubes. A bare gold electrode was placed in a solution of CysAm to create a self-assembled monolayer on its surface. The modified electrode was then incubated with a solution of multi-walled carbon nanotubes. Cyclic voltammetry and atomic force microscopy were used to characterize the modified electrode. The results indicated that the number of functionalized MWCNTs on the surface of the electrodes increased by enhancing incubation time.

Simple and low-cost electrochemical sensor based on nickel nanoparticles for the determination of cabergoline

Cabergoline (CAB) is an ergot alkaloid derivative with dopamine agonist activity. In this work for the first time the electrocatalytic oxidation of CAB was carried out with nickel nanoparticles-modified carbon paste electrode using cyclic voltammetry, chronoamperometry, chronocoulometry and amperometry methods. At first, nickel nanoparticles were synthesized by non-aqueous polyol method and these nanoparticles were mixed with graphite powder to form modified carbon paste electrode. The resulting modified electrode was characterized by scanning electron microscope images. In the presence of 0.1 M NaOH a good redox behavior of the Ni(III)/Ni(II) couple at the surface of the electrode can be observed. CAB was successfully oxidized at the surface of the modified electrode. The electrocatalytic oxidation peak current of this drug was linearly dependent on its concentration. The proposed sensor exhibited a high sensitivity and was successfully applied for the determination of CAB in real samples.