Excess differential thermodynamic properties

A strategy is described for the systematic generation of a complete set of partial derivatives of the four energy functions from a basis set of five measured properties: V_m, S_m, C_p,m (δV_m/δT)_p and either (δV_m/δp)_T or (δV_m/δp)_s. The same set of equations applies to both pure substances and either real or ideal mixtures.

Examples are given of some excess differential properties of binary mixtures which exhibit unusual sensitivity to changes in composition.     

Prediction of specific retention volumes in gas chromatography by using Kováts and molecular structural coefficients

The Kováts coefficients, K_c,Z, of a stationary phase and the solute's molecular structural coefficients, S_c,i, depend both on the specific retention volume V_g, of a solute or homologous series and on the “log-plot” slope, b, of a chromatographic column. In view of this dependence, the feasibility of predicting V_g in three instances was investigated: (a) V_g prediction of any n-alkane from K_c,Z and retention data of n-decane; (b) V_g prediction of any solute from the temperature dependence of the above parameters and (c) V_g prediction of any term of a homologous series from the correlations of the S_c increments, ΔS_c, with the organic structural function. The possibilities of the method are evaluated in the light of the analysis of the deviations of the predicted V_g values from the measured values.     

High pressure studies of the static permittivity tensor components in the nematic phase of 6CB

The dielectric permittivity tensor components, ε_II and ε_⊥, in the nematic phase of 6CB (4-n-hexyl-4'-cyanobiphenyl) were measured in the pressure range 0.1-130 MPa and the temperature range 12-58°C. The dielectric anisotropy, Δε(p, V, T) = ε_II - ε_⊥, was analysed in isothermal, isobaric and isochoric conditions taking into account the pVT data and the well known Maier and Meier equation. On that basis the nematic order parameter S(p, V, T) was determined. This was used to calculate the parameter Γ relating the interaction potential with the volume (density). Its value Γ = 4.1 agrees very well with other estimates.     

Experimental study and modelling using the ERAS-Model of the excess molar volume of acetonitrile–alkanol mixtures at different temperatures and atmospheric pressure

Densities of {(1−x)CH₃(CH₂)_n−1OH + xCH₃CN} for n=1, 2, 3 or 4 have been determined as a function of composition at 288.15, 293.15, 298.15 and 303.15 K at atmospheric pressure using a vibrating-tube densimeter (Anton Paar DMA 4500, resolution 1×10⁻⁵ g cm⁻³). Excess molar volumes were calculated. The V_m^E values were negative for acetonitrile–methanol mixtures and sigmoid for acetonitrile–alkanols (C₂–C₄) mixtures over the complete mole fraction range. V_m^E values increase in a positive direction with increase in chain length of the alkanols and with the temperature. The Extended Real Associated Solution Model (ERAS-Model) calculations allowing for self-association for the alkanols and complex formation between acetonitrile and alkanols have been used to correlate experimental data. The model is able to reproduce the asymmetrical V_m^E behavior of the studied systems, although agreement between theoretical and experimental values is less satisfactory for some concentration ranges.     

Evaluation of the immobilized artificial membrane phosphatidylcholine: Drug discovery column for high-performance liquid chromatographic screening of drug–membrane interactions

Chromatographic retention factors (k′) of a series of eight β-adrenoceptor antagonist compounds (β-adrenolytic drugs) were determined employing an immobilized artificial membrane column (IAM.PC.DD). The influence of mobile phase pH, ionic strength, and organic modifier composition was studied in order to examine column performance. After the IAM.PC.DD columns were exposed to approximately 7000 column volumes of a 0.01 M PBS mobile phase, five out of six columns tested showed significant peak broadening and decreased k′ values indicative of premature column failure. The data suggested that the immobilized phospholipids stationary phase was removed by the 0.01 M PBS mobile phase. The β-adrenolytic drug's log k′_IAM values obtained with an IAM.PC.DD column were compared to an ^esterIAM.PC.MG column for predicting drug membrane interactions. For the linear regression analysis between log k′_IAM and the logarithm of the n-octanol–water partition coefficients (r_IAM.PC.DD=0.8710 vs. r_IAM.PC.MG=0.9538), the C₁₈ HPLC retention factors (r_IAM.PC.DD=0.8408 vs. r_IAM.PC.MG=0.9380), the liposome partition coefficients (r_IAM.PC.DD=0.8887 vs. r_IAM.PC.MG=0.9187), and various pharmacokinetic parameters, significantly better correlations were obtained with the ^esterIAM.PC.MG column than the IAM.PC.DD column.     

Thermochemical properties of Ln(Gly)4Im(ClO4)3·nH2O (Ln = Gd, Tb, Dy, Y)

The enthalpies of dissolution in water of new ternary complexes of four late trivalent lanthanide ions Ln(Gly)₄Im(ClO₄)₃·nH₂O (Ln=Gd, Tb, Dy, Y; Gly: glycine; Im: imidazole and n=1 or 2) were measured by means of a Calvet microcalorimeter. Empirical formulae for the calculation of the enthalpies of dissolution (Δ_dissH), relative apparent molar enthalpies (Δ_dissH (app)), relative partial molar enthalpies (Δ_dissH (partial)) and enthalpies of dilution (Δ_dilH_1,2) were obtained from the experimental data of the enthalpies of dissolution of these complexes. The plot of Δ_dissH_m^Θ, Δ_dissH (app) and Δ_dissH (partial) versus the values of the ionic radius of the lanthanide element (r) showed a grouping effect of the lanthanide elements, indicating that the coordinated bond between the lanthanide ions and the ligands has some covalent character. The unknown value of the standard enthalpy of dissolution for the similar complex: Ho(Gly)₄Im(ClO₄)₃·H₂O was estimated according to the plot of Δ_dissH_m^Θ versus r.     

Survey of ligand field parameters of strong field d complexes obtained from the g matrix

Using a newly proposed approach involving an internally consistent set of equations, the ligand field parameters Δ/ξ, V/ξ and k are obtained from literature values of the g matrix for strong field d⁵ systems of various conformations in which |Δ/ξ|≤10. Qualitative analysis of the observed results is done using the Angular Overlap Model, AOM.     

Thermal stability and related thermodynamic properties of N-ethylthiourea

The enthalpy and entropy of sublimation of N-ethylthiourea were obtained from the temperature dependence of its vapour pressure measured by both the torsion–effusion and the Knudsen effusion method in the temperature range 360–380 K. The compound undergoes no solid-to-solid phase transition or decomposition below 380 K. The pressure against reciprocal temperature resulted in lg(p, kPa) = (13.40 ± 0.27) − (6067 ± 102) /T(K). The molar sublimation enthalpy and entropy at the mid interval temperature were Δ_subH_m(370 K) = (116.1 ± 2.0) kJ mol⁻¹ and Δ_subS_m(370 K) = (218.0 ± 5.2) J mol⁻¹ K⁻¹, respectively. The same quantities derived at 298.15 K were (118.8 ± 2.1) kJ mol⁻¹ and (226.1 ± 5.5) J mol⁻¹ K⁻¹, respectively.     

The excess molar volumes of (an alkanol + a branched chain ether) at the temperature 298.15 K and the application of the ERAS model

The excess molar volumes V_m^E {x(CH₃OH or CH₃CH₂OH or CH₃(CH₂)₂OH or CH₃CH(OH)CH₃ + (1 - x){CH₃(CH₂)₂}₂O or CH₃C(CH₃)₂OCH₃ or CH₃CH₂C(CH₃)₂OCH₃} have been calculated from measured values of density over the whole composition range at the temperature 298.15 K in order to investigate OH … O specific interactions. The results are explained in terms of the strong self-association of the alkanols, the specific interaction between the alkanol, and the ether molecules and packing effects upon mixing. The experimental V_m^h results presented here, together with the previously reported data for the molar excess enthalpy H_m^E, has been used to test the Extended Real Associated Solution (ERAS) model.     

吡啶基离子液体[C_6py][DCA]热力学性质及利用新E?tv?s方程预测其表面张力

制备了吡啶类离子液体N-己基吡啶二氰胺盐[C_6py][DCA],并用核磁共振氢谱(~1H NMR)、核磁共振碳谱(~(13)C NMR)、差热扫描量热(DSC)、傅里叶变换红外(FT-IR)光谱对其进行表征。在288.15–338.15 K温度范围内,采用标准加入法,测定其密度(ρ)、表面张力(γ)和折光率(n_D)。在测得的实验数据的基础上,得到了离子液体[C_6py][DCA]的分子体积(V_m)、表面能(E_a)、摩尔极化度(R_m)和极化率(α_p)。结果显示E_a、R_m和α_p几乎不随温度的变化而发生改变。本文还提出了摩尔表面Gibbs自由能(g_s)的概念,并改进了E?tv?s方程。同时还计算了gs、临界温度(T_c)和E?tv?s方程经验参数(kE),并预测了离子液体[C_6py][DCA]的表面张力,预测值与实验值具有较好的一致性。     

The optical properties of polymethylmethacrylate polymer dispersed liquid crystals

The effect of the addition of polymer liquid crystals as dispersed molecules to polymethylmethacrylate (PMMA) on the optical properties in the UV-visible and near infrared regions is investigated. From transmission, absorption and reflection spectra the absorption coefficient (ω) and refractive index (n) at angular frequency of radiation (ω) have been calculated at room temperature. The values of the optical band gap (E_opt) have been obtained from the direct allowed transitions in k-space. The width of the tails of localized states in the band gap (ΔE) was evaluated from Urbach edges. Both the parameters (E_opt) and (ΔE) vary with the mixing ratio of dispersed liquid crystals.     

缓冲盐类型和离子对试剂非对离子对强离解酸性化合物离子对反相液相色谱保留行为的影响

在离子对反相液相色谱(IP-RPLC)分析中,溶质保留受对离子(counter ion)的影响比较受人关注,但鲜有研究流动相中缓冲盐类型和离子对试剂中非对离子(non-counter ion)对溶质保留行为的影响。鉴于此,该文以14种磺酸化合物为研究对象,甲醇为有机调节剂,分别考察了3种缓冲盐体系(磷酸二氢铵、氯化铵和乙酸铵)和5种离子对试剂体系(四丁基溴化铵、四丁基磷酸二氢铵、四丁基硫酸氢铵、四丁基硝酸铵和四丁基乙酸铵)下强离解酸性化合物的IP-RPLC保留行为,通过比较不同流动相条件下得到的溶质log k_w(100%水相作流动相时的保留因子)、S(线型溶剂强度模型线性回归得到的常数),以及CHI(色谱疏水指数,log k_w/S),寻找保留行为规律。研究表明,流动相中的缓冲盐类型和离子对试剂非对离子均会影响化合物的log k_w和S值,所有化合物在氯化铵缓冲盐体系下具有最大的log k_w值。相对于无机阴离子,离子对试剂中弱离解性有机阴离子(乙酸根)的存在有利于增加磺酸化合物的S值。通过对比不同条件下的保留行为,推测磺酸化合物的IP-RPLC保留机理中同时存在着离子对模型和动态离子交换模型。与log k_w和S值不同,化合物的CHI值受缓冲盐类型以及离子对试剂非对离子的影响较弱。此外,研究发现化合物的表观正辛醇/水分配系数(log D)与log k_w、S、CHI之间均具有良好的线性相关性。不同缓冲溶液和不同离子对试剂非对离子条件下获得的log k_w和S值存在着一定的差异,而CHI值相对稳定,因此,CHI更适用于IP-RPLC中定量结构-保留行为关系模型的建立。     

Study on the retention behaviour of low-molar-mass polystyrenes and polyesters in reversed-phase liquid chromatography by evaluation of thermodynamic parameters

Polymers can be characterized under sorption conditions, to obtain information on molar mass and chemical composition. In order to get a better understanding of their retention behaviour under such conditions, the evaluation of thermodynamic parameters obtained from van't Hoff analyses on low-molar-mass polystyrenes (PS) and polyesters (PE) in various THF–water mixtures on a C₁₈ column is described in this study. Linear van't Hoff behaviour was observed in almost all cases. Negative values for both ΔH and ΔS were found for both PS and PE oligomers, which increase with increasing %THF. For ΔS this is explained from multi-site attachment effects. For PS, the non-linear relations between ΔH and ΔS, and degree of polymerization (p) could be properly described by the Stockmayer–Fixman equation. Although less clear, similar trends were found for PE. For PS, evidence for penetration effects of oligomer chains into the bonded chains was obtained. Martin plots for both PS and PE were shown to be non-linear in all investigated eluent compositions. The extent of non-linearity is suggested to depend on the conformation of a polymer in solution. No distinct enthalpy–entropy-compensation temperature (EECT) independent of p was found for PS, thus confirming the findings of an earlier study in which no exact molar mass independence was found under critical conditions. Further evaluation of EECT for PS oligomers revealed a retention mechanism independent of the binary eluent composition. This indicates that conclusions from this study can also be used for a qualitative understanding of sorption mechanisms in the gradient elution mode. Finally, for PS it was shown that ΔG equals zero under critical conditions, thus confirming theoretical predictions.     

Thermogravimetric study on perovskite-like oxygen permeation ceramic membranes

The oxygen permeation properties of mixed-conducting ceramics SrFeCo_0.5O_3−δ (SFCO), Ba_0.5Sr_0.5Co_0.8Fe_0.2O_3−δ (BSCFO), La_0.2Sr_0.8Co_0.8Fe_0.2O_3−δ (LSCFO) and Ba_0.95Ca_0.05Co_0.8Fe_0.2O_3−δ (BCCFO) were studied by thermogravimetric method in the temperature range 600–900 °C. The results show that the oxygen adsorption rate constants k_a of all material are larger than oxygen desorption rate constants k_d and both k_a and k_d are not strongly dependent on temperature in the studied temperature range. The oxygen vacancy contents δ(N₂) and δ(O₂) in nitrogen and oxygen and their difference Δδ = δ(N₂) − δ(O₂) play an important role in determining the temperature behavior of oxygen permeation flux J_O2.     

Calorimetric study of the adducts CdBr2·nL (n = 1 and 2; L = ethyleneurea and propyleneurea)

A calorimetric study was performed for adducts of general formula CdBr₂·nL (n=1 and 2; L=ethyleneurea (eu) and propyleneurea (pu)). The standard molar reaction enthalpy in condensed phase: CdBr₂(c)+nL(c)=CdBr₂·nL(c); Δ_rH_m^θ, were obtained by reaction–solution calorimetry, to give the following values for mono- and bis-adducts: −19.54 and −34.59; −7.77 and −19.05 kJ mol⁻¹ for eu and pu adducts, respectively. Decomposition (Δ_DH_m^θ) and lattice (Δ_MH_m^θ) enthalpies, as well as the mean cadmium---oxygen bond dissociation enthalpy, DCd---O, were calculated for all adducts.     

Excess molar volumes and enthalpies for the binary systems propyl propanoate + o-xylene, m-xylene, and p-xylene at 298.15 K

This paper reports excess molar enthalpies, H_m^E, and excess molar volumes, V_m^E, of the binary systems {propyl propanoate + o-xylene}, {propyl propanoate + m-xylene} and {propyl propanoate + p-xylene} at the temperature 298.15 K and atmospheric pressure, over the whole composition range. V_m^E was calculated from the experimental measurement of the corresponding densities, while H_m^E was measured directly. The excess magnitudes were correlated to a Redlich-Kister type equation. Finally, we will discuss the results of the three mixtures studied here and by comparison with other binary systems containing propyl propanoate and a benzene-based compound previously published.     

硅胶基质固定相离子对反相液相色谱法测定强离解化合物的正辛醇/水分配系数

反相液相色谱(RPLC)是测定正辛醇/水分配系数(log P)的有效方法,但由于缺少同类型模型化合物,RPLC在测定强离解化合物的log P时遇到挑战。该文在硅胶基质C18色谱柱上,采用离子抑制反相液相色谱(IS-RPLC)和离子对反相液相色谱(IP-RPLC)分别对中性化合物、酚酸、羧酸、磺酸及部分两性化合物的保留行为进行了系统研究。在IS-RPLC模式下,利用中性化合物、弱离解的酚酸和苯羧酸作为模型化合物,建立了表观正辛醇/水分配系数(log D)与纯水相保留因子对数值(log k_w)的定量结构-保留行为关系(QSRR)模型,测定了19种离解化合物的log D值,作为后续IP-RPLC的模型化合物及验证化合物。在IP-RPLC模式下,将中性、弱离解和强离解化合物作为混合模型组,以溶质静电荷n_e、氢键酸碱性参数A和B为桥梁,建立了线性良好的log D-log k_w-IP模型,采用3种不同类型的离解化合物进行了外部验证实验,预测值误差低于10%,证实了模型的可靠性。在此基础上,预测了8种强离解化合物的log D_7.0值(pH 7.0条件下的log D值)。研究表明,利用结构相关参数沟通不同类型的模型化合物,是实现IP-RPLC测定强离解化合物log D值的一种行之有效的方法。与聚乙烯醇基质色谱柱相比,通用型的硅胶基质色谱柱上尽管存在着更多的次级作用,但可以为强离解化合物log D的测定提供更灵活的选择。     

Solvent extraction of Fe(III) by dehydrated castor oil fatty acids

The effect of temperature on the extraction of FE(III) by dehydrated castor oil fatty acids (DCOFA) has been studied in the temperature range 283–313 K at 1.0M constant ionic strength (NaClO₄). The temperature dependence of the conditional constant of extraction is given in the form: ln K_ext=31.95 − 12800(1/T). Also, it was found that the average thermodynamic parameters, ΔH°_ext, ΔG°_ext, and ΔS°_ext are 106.5 kJ/mole, 27.3 kJ/mole, and 0.3 kJ. mole⁻¹.K⁻¹, respectively. The extracted species in toluene solution were identified as FeR₃.HR and Fe(OH)R₂, where HR represents the fatty acid used.     

Conductivity, calorimetry and phase diagram of the NaHSO4–KHSO4 system

Physico-chemical properties of the binary system NaHSO₄–KHSO₄ were studied by calorimetry and conductivity. The enthalpy of mixing has been measured at 505 K in the full composition range and the phase diagram calculated. The phase diagram has also been constructed from phase transition temperatures obtained by conductivity for 10 different compositions and by differential thermal analysis. The phase diagram is of the simple eutectic type, where the eutectic is found to have the composition X(KHSO₄) = 0.44 (melting point ≈ 406 K). The conductivities in the liquid region have been fitted to polynomials of the form κ(X) = A(X) + B(X)(T − T_m) + C(X)(T − T_m)², where T_m is the intermediate temperature of the measured temperature range and X, the mole fraction of KHSO₄. The possible role of this binary system as a catalyst solvent is also discussed.