Spectroscopic characteristics of Pr<Superscript>3+</Superscript> in biaxial La<Subscript>2</Subscript>(WO<Subscript>4</Subscript>)<Subscript>3</Subscript> crystal

A Pr³⁺-doped La₂(WO₄)₃ crystal grown by the Czochralski method has been investigated as a promising laser material. The principal axes of the optical indicatrix and Pr³⁺ concentration of the crystal were determined. The polarized absorption, fluorescence spectra and fluorescence decay curves of the main emission multiplets of the crystal were measured at room temperature. The spectroscopic parameters were obtained by the modified Judd–Ofelt theory combined with the normalized method. The peak stimulated emission cross-sections of the major emission lines were estimated. The good spectroscopic properties imply that the Pr³⁺:La₂(WO₄)₃ crystal is a potential laser gain medium for solid-state laser and self-stimulated Raman laser applications. PACS 78.20.-e; 42.70.Hj     

Luminescence of Eu<Superscript>3+</Superscript> rare-earth ions in Lu<Subscript>2</Subscript>O<Subscript>3</Subscript> nanospheres

The kinetics of luminescence of Eu³⁺ ions in Lu₂O₃:Eu nanospheres with diameters of 100–270 nm and a small standard deviation of the size distribution <15% has been studied. A sharp decrease in the decay time of luminescence of Eu³⁺ ions in the red range with an increase in the diameter of nanospheres has been attributed to the appearance of a photon mode accelerating spontaneous luminescence, which is confirmed by the calculation of ranges of existence of whispering-gallery modes in studied nanospheres.     

Red,Yellow, Blue and Green Emission from Eu<Superscript>3+</Superscript>, Dy<Superscript>3+</Superscript> and Bi<Superscript>3+</Superscript> Doped Y<Subscript>2</Subscript>O<Subscript>3</Subscript>nano-Phosphors

Rare earth elements (RE = Eu³⁺& Dy³⁺)and Bi³⁺ doped Y₂O₃ nanoparticles were synthesized by urea hydrolysis method in ethylene glycol, which acts as reaction medium as well as a capping agent, at a low temperature of 140 °C,followed by calcination of the obtained product. Transmission electron microscope (TEM) images reveals that ovoid shaped Y₂O₃ nanoparticles of around 22–24 nm size range were obtained in this method. The respective RE and Bi³⁺ doped Y₂O₃ precursor nanoparticles when heated at 600 and 750 °C, retains the same shape as that of the as-synthesized Y₂O₃ precursor samples. From EDAX spectra, the incorporation of RE ions into the host has been studied. XRD pattern reveals the crystalline nature of the heated nanoparticles and indicate the absence of any impurity phase other than cubic Y₂O₃.However, the as-synthesized nanoparticles were highly amorphous without the presence of any sharp XRD peaks. Photoluminescence study suggests that the synthesized samples could be used as red (Eu³⁺), yellow (Dy³⁺), blue and green (Bi³⁺)emitting phosphors.     

Intense White Luminescence from Combustion Synthesized Ca<Subscript>12</Subscript>Al<Subscript>14</Subscript>O<Subscript>33</Subscript>: Yb<Superscript>3+</Superscript>/Yb<Superscript>2+</Superscript> Single Phase Phosphor

The Ca₁₂Al₁₄O₃₃: Yb³⁺/Yb²⁺ single phase nano-phosphor has been synthesized through combustion route and its luminescence and lifetime studies have been carried out up to 20 K using 976 and 266 nm excitations. The samples heated in open atmosphere have shown the presence of Yb in Yb³⁺ and Yb²⁺ states. The 976 nm excitation results a cooperative upconversion emission at 486 nm due to the Yb³⁺ state and a broad band in the blue region and has been assigned to arise from the defect centers. The 266 nm excitation on the other hand results a broad emission band even from as-synthesized phosphor without doping of Yb, the width of which increases in presence of Yb due to the emission from Yb²⁺ ions formed in heated samples. The white emission covers almost whole visible region with bandwidth 190 nm. The ions in Yb²⁺ state has been found to increase with the increase in heating temperature up to 1,273 K. A back conversion of Yb²⁺ to Yb³⁺ has been observed for higher temperatures. Effect of boric and phosphoric acids as flux on the emission properties of Yb³⁺ and Yb²⁺ states have been examined and discussed. Quantum yield of emission has also been determined for different samples.     

Influence of magnetic ordering on electronic structure of Tb<Superscript>3+</Superscript> ion in TbFe<Subscript>3</Subscript>(BO<Subscript>3</Subscript>)<Subscript>4</Subscript> crystal

Optical absorption spectra of trigonal crystal TbFe₃(BO₃)₄ have been studied in the region of ⁷F₆ → ⁵D₄ transition in Tb³⁺ ion depending on temperature (2–220 K) and on magnetic field (0–60 kOe). Splitting of the Tb³⁺ excited states, both under the influence of the external magnetic field and effective exchange field of the Fe-sublattice, have been determined. Landé factors of the excited states have been found. Stepwise splitting of one of the absorption lines has been discovered in the region of the Fe-sublattice magnetic ordering temperature. This is shown to be due to the abrupt change of equilibrium geometry of the local Tb³⁺ ion environment only in the excited state of the Tb³⁺ ion. In general, the magnetic ordering is accompanied by temperature variations of the Tb³⁺ local environment in the excited states. The crystal field splitting components have been identified. In particular, it has been shown that the ground state (in D ₃ symmetry approximation) consists of two close singlet states of A ₁ and A ₂ type, which are split and magnetized by effective exchange field of the Fe-sublattice. Orientations of magnetic moments of the excited electronic states relative to that of the ground state have been experimentally determined in the magnetically ordered state of the crystal. A pronounced shift of one of absorption lines has been observed in the vicinity of the TbFe₃(BO₃)₄ structural phase transition. The temperature interval of coexistence of the phases is about 3 K.     

Flame-synthesized Y<Subscript>2</Subscript>O<Subscript>3</Subscript>:Tb<Superscript>3+</Superscript> nanocrystals as spectral converting materials

In flame spray pyrolysis (FSP), the generation of uniform nanoparticles can be quite challenging due to difficulties in controlling droplet sizes during liquid spraying and uneven flame temperature. Here, we report a method to produce relatively uniform nanocrystals of a Tb³⁺ doped Y₂O₃ phosphor. In ethanol, metal nitrate precursors were simply mixed with organic surfactants to form a homogeneous solution which was then subjected to FSP. Depending on relative concentrations of the surfactant (oleic acid) to the metal precursors (yttrium and terbium nitrates), different sizes and morphologies of Y₂O₃:Tb³⁺ particles were obtained. By adjusting the surfactant concentration, Y₂O₃:Tb³⁺ crystals as small as 20~25 nm were acquired. X-ray diffraction and transmittance electron microscopy were used to prove that as-synthesized nanoparticles were highly crystalline due to the high temperature of FSP. X-ray photoelectron spectroscopy revealed that terbium dopants were well distributed throughout Y₂O₃ particles and a small portion of carbonate impurities were remained on the surface of particles, presumably originated from incomplete combustion of the organic surfactants. Photoluminescence (PL) spectra of Y₂O₃:Tb³⁺ nanocrystals exhibited a green light emission ensuring that the terbium doping was successfully occurred. However, when post-annealing was performed on the nanocrystals, their PL was dramatically enhanced indicating that quenching centers such as carbonate impurities and surface defects may have been removed by the annealing process. Owing to the continuous processability of FSP, this current method can be a practical way to produce nanoparticles in a large quantity. The obtained Y₂O₃:Tb³⁺ nanocrystals were used to fabricate a transparent film with poly-ethylene-co-vinyl acetate (poly-EVA) polymer, which was suitable for a spectral converting layer for a solar cell.

Open image in new window

Graphical abstract ?

     

Preparation and Photoluminescence of Sm <Superscript>3+</Superscript> Doped YAlO <Subscript>3</Subscript> Phosphor

YAlO₃: Sm³⁺ phosphor has been synthesized by the solid state reaction method with calcium flouride used as a flux. The resulting YAlO₃: Sm³⁺ phosphor was characterized by X-ray diffraction (XRD) technique, Fourier transmission infrared spectroscopy (FTIR), photoluminescence . . PL excitation spectrum was found at 254,332,380,400,407, 603 and 713 nm. Under excitation of UV(713 nm) YAlO₃: Sm³⁺ (0–3 %) broad band emission were observed from 400 to 790 nm with a maximum around 713 nm of YAlO₃ host lattice accompanied by weak emission of Sm³⁺ (⁴G_5/2 – ⁶H_5/2, ⁶H_7/2,⁶H_9/2) transitions. The results of the XRD show that obtained YAlO₃: Sm³⁺ phosphor has a orthorhombic structure. The study suggested that Sm³⁺ doped phosphors are potential luminescence material for laser diode pumping and inorganic scintillators.     

Kinetics of the sorption of <Superscript>3</Superscript>He by C<Subscript>60</Subscript> fullerite. The quantum diffusion of <Superscript>3</Superscript>He and <Superscript>4</Superscript>He in fullerite

The kinetics of the sorption and subsequent desorption of gaseous ³He in a C₆₀ fullerite powder has been studied in the temperature range of 2–292 K. The temperature dependences of the diffusion coefficients of ³He and ⁴He impurities in fullerite have been plotted using the measured characteristic times of filling of octahedral and tetrahedral interstices, as well as previous data. These temperature dependences of the diffusion coefficients of ³He and ⁴He impurities in fullerite are qualitatively similar. A decrease in the temperature from 292 to 79 K is accompanied by a decrease in the diffusion coefficients, which corresponds to the dominance of the thermally activated diffusion of helium isotopes in fullerite. A further decrease in the temperature to 8–10 K leads to an increase in the diffusion coefficients by more than an order of magnitude. The diffusion coefficients of ³He and ⁴He are independent of the temperature below 8 K, indicating the tunnel character of the diffusion of helium in C₆₀ fullerite. The isotope effect is manifested in the difference between the absolute values of the diffusion coefficients of ³He and ⁴He atoms at the same temperatures.     

On the Luminescence of Ce<Superscript>3+</Superscript>, Eu<Superscript>3+</Superscript>, and Tb<Superscript>3+</Superscript> in Novel Borate LiSr<Subscript>4</Subscript>(BO<Subscript>3</Subscript>)<Subscript>3</Subscript>

This paper reports on the photoluminescence (PL) and time-resolved properties of Ce³⁺, Eu³⁺, and Tb³⁺ in novel LiSr₄(BO₃)₃ powder phosphors. Ce³⁺ shows an emission band peaking at 420 nm under 350-nm UV excitation. Energy transfer from Ce³⁺ to Mn²⁺ takes place in the co-doped samples. Eu³⁺ shows red emission under near UV excitation. LiSr₄(BO₃)₃:Eu³⁺ phosphor could be a suitable candidate for phosphor-converted solid state lighting. The luminescence lifetime is 2.13 ms for Eu³⁺ in LiSr₄(BO₃)₃:0.001Eu³⁺. As Eu³⁺ concentration increasing, the decay curves deviate from exponential behavior. Tb³⁺ shows the strongest ⁵D₄→⁷ F₅ emission line at 540 nm. Decay curves of ⁵D₄→⁷ F₅ and ⁵D₃→⁷ F₅ emission with different Tb³⁺ concentrations were also measured. Cross-relaxation process is discussed based on the decay curves.     

Luminescence and electronic excitations in Li<Subscript>6</Subscript>Gd(BO<Subscript>3</Subscript>)<Subscript>3</Subscript>: Ce<Superscript>3+</Superscript> crystals

This paper reports on a study of the luminescence emitted by Li₆Gd(BO₃)₃: Ce³⁺ crystals under selective photoexcitation to lower excited states of the host ion Gd³⁺ and impurity ion Ce³⁺ within the 100–500-K temperature interval, where the mechanisms of migration and relaxation of electronic excitation energy have been shown to undergo noticeable changes. The monotonic 10–15-fold increase in intensity of the luminescence band at 3.97 eV has been explained within a model describing two competing processes, namely, migration of electronic excitation energy over chains of Gd³⁺ ions and vibrational energy relaxation between the ⁶ I _j and ⁶ P _j levels. It has been shown that radiative transitions in Ce³⁺ ions from the lower excited state 5d ¹ to ² F _5/2 and ² F _7/2 levels of the ground state produce two photoluminescence bands, at 2.08 and 2.38 eV (Ce1 center) and 2.88 and 3.13 eV (Ce2 center). Possible models of the Ce1 and Ce2 luminescence centers have been discussed.     

Up-conversion emissions of Er<Superscript>3+</Superscript>-Yb<Superscript>3+</Superscript> codoped Al<Subscript>2</Subscript>O<Subscript>3</Subscript> nanoparticles by the arc discharge synthesis method

The Er³⁺-Yb³⁺ codoped Al₂O₃ nanoparticles with an average particle size of about 50 nm have been synthesized by an arc discharge synthesis method. The green and red up-conversion emissions centered at about 526, 547 and 677 nm, corresponding respectively to the ²H_11/2→⁴I_15/2, ⁴S_3/2→⁴I_15/2 and ⁴F_9/2→⁴I_15/2 transitions of Er³⁺, were detected by a 978-nm semiconductor laser diode excitation. The Annealing has evident effect on the up-conversion emissions of the samples: The red up-conversion emission is noticeable before annealing; however, the green up-conversion emission becomes predominant after annealing. The mixture of (Er,Yb)₃Al₅O₁₂ and α-(Al,Er,Yb)₂O₃ phases is more favorable for green up-conversion emissions due to an enhancement of the ESA (I) of ⁴I_11/2+a photon→⁴F_7/2 and ET (III) of ²F_5/2(Yb³⁺)+⁴I_11/2(Er³⁺)→²F_7/2(Yb³⁺)+⁴F_7/2(Er³⁺) processes. The two-photon absorption up-conversion process is involved in the green and red up-conversion emissions. The results have proved that arc discharge synthesis is a new promising preparation technology for optical materials. Supported by National Natural Science Foundation of China (Grant No. 10804015), the Scientific Research Foundation for Doctor of Liaoning Province (Grant No. 20071095), and the Educational Committee Foundation of Liaoning Province (Grant No. 2008123)     

Spin Kinetics of Liquid <Superscript>3</Superscript>He in Contact with a DyF<Subscript>3</Subscript> Micropowder at Ferromagnetic Ordering of Dy<Superscript>3+</Superscript> Ions

The spin kinetics of liquid ³He in contact with a mixture of LaF₃ (99.67%) and DyF₃ (0.33%) micropowders at temperatures of 1.5–3 K has been studied by pulsed nuclear magnetic resonance (NMR). The DyF3 is a dipolar dielectric ferromagnet with the phase transition temperature T_c= 2.55 K, whereas the diamagnetic fluoride LaF₃ is a diluting substance for the optimal observation conditions of ³Не NMR in powder pores. The magnetic phase transition in DyF₃ is accompanied by a considerable change in the character of fluctuations of the magnetic moments of dysprosium ions, which affect the spin kinetics of ³Не in contact with the substrate. Significant changes in the relaxations rates of the longitudinal and transverse magnetizations of 3Не have been discovered in the region of magnetic ordering of the solid matrix. The technique of studying the static and fluctuating magnetic fields of a solid matrix at low temperatures using liquid ³He as a probe has been proposed.     

Effect of Sr<Superscript>2+</Superscript> ion substitution with trivalent ions (Sc<Superscript>3+</Superscript>, In<Superscript>3+</Superscript>, La<Superscript>3+</Superscript>, Bi<Superscript>3+</Superscript>) on its ferroelectric instability in SrTiO<Subscript>3</Subscript>

The vibration frequencies of unstable ferroelectric and antiferrodistortion modes and the dependences of the energy on the ion displacement amplitude have been calculated within the generalized Gordon-Kim model for distortions along eigenvectors of these modes in the mixed compounds Sr_{1 − x} A _x Ti_{1 − x} /₄□ _x/4O₃ and Sr_{1 − y} A _2y /₃□ _y/3TiO₃ (A = Sc³⁺, In³⁺, La³⁺, Bi³⁺; □ is the vacancy). To compensate an excess positive charge, vacancies are introduced into the Ti⁴⁺ or Sr²⁺ site. Calculations have been performed in the “daverage” crystal approximation for impurity concentrations of 0.25 and 0.50. To this end, a set of 40 atomic superlattices with various orderings of heterovalent ions Sr²⁺ and impurity A ³⁺ has been considered. It has been found that each impurity type, independently of charge balance, induces ferroelectric instabilities in doped compounds. In the case of doping with In³⁺ and La³⁺ for concentration x = 0.25, the possibility of rotating the polarization vector has been shown.     

A miniature tunable TEA CO<Subscript>2</Subscript> laser using isotope <Superscript>13</Superscript>C<Superscript>16</Superscript>O<Subscript>2</Subscript> and <Superscript>12</Superscript>C<Superscript>16</Superscript>O<Subscript>2</Subscript>

A miniature tunable TEA CO₂ laser using isotope ¹³C¹⁶O₂ as the active medium is developed to extend the spectral range of CO₂ lasers for further application. The optimization of the energy parameters of the tunable TEA ¹³C¹⁶O₂ laser and the same laser using ¹²C¹⁶O₂ are studied. When a gas mixture (¹³C¹⁶O₂: N₂: He = 1: 1: 3) at a total pressure of 6.4 × 10⁴ Pa is used, the TEA ¹³C¹⁶O₂ laser of a 45-cm³ active volume obtains 51 emission lines in the [00⁰1–10⁰0] and [00⁰1–02⁰0] bands. The maximum pulse energy of the TEA ¹³C¹⁶O₂ laser is about 357 mJ. The same laser using the conventional gas mixture (¹²C¹⁶O₂: N₂: He = 1: 1: 3) at a pressure of 6.66 × 10⁴ Pa is measured to obtain 69 laser emission lines and the maximum pulse energy of laser radiation is about 409 mJ.     

Line shape parameters study of the 6p7p (<Superscript>1</Superscript>P<Subscript>1</Subscript>, <Superscript>3</Superscript>D<Subscript>1</Subscript> and <Superscript>3</Superscript>P<Subscript>1</Subscript>): Autoionizing resonances in barium

We report a systematic line shape analysis study of the 6p7p configuration based ¹P₁, ³D₁ and ³P₁ autoionizing resonances in barium using a Nd:YAG pumped dye laser system in conjunction with a thermionic diode ion detector. The even parity isolated autoionizing resonances have been approached via four intermediate states 6 snp ¹P₁ (6 ≤n ≤8) and 5d6p ¹P₁. A comparison of the Fano parameters of the resonance profiles reveals that the width of an autoionizing resonance is independent of the excitation path while the line profile parameter changes with the selection of different intermediate states.     

Luminescence in Dy<Superscript>3+</Superscript> and Eu<Superscript>3+</Superscript> Activated K<Subscript>3</Subscript>Al<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>

The Dy³⁺ and Eu³⁺ activated K₃Al₂ (PO₄)₃ phosphors were prepared by a combustion synthesis. From a powder X-ray diffraction (XRD) analysis the formation of K₃Al₂ (PO₄)₃ was confirmed. In the photoluminescence emission spectra, the K₃Al₂(PO₄)₃:Dy³⁺ phosphor emits two distinctive colors: blue and yellow whereas K₃Al₂(PO₄)₃:Eu³⁺ emits red color. Thus the combination of colors gives BYR (blue–yellow–red) emissions can produce white light. These phosphors exhibit a strong absorption between 340 and 400 nm which suggest that present phosphor is a promising candidate for producing white light-emitting diodes (LED).     

On the distribution coefficient of Ce<Superscript>3+</Superscript> ions in LiF-LuF<Subscript>3</Subscript>-YF<Subscript>3</Subscript> solid-solution crystals

The optimum ratio of the numbers of the Y³⁺ and Lu³⁺ ions in LiF-LuF₃-YF₃ solid solutions at which the distribution (introduction) coefficient of Ce³⁺ ions is three to five times larger than that in LiYF₄ and LiLuF₄ crystals has been determined by the EPR and optical spectroscopy methods.     

Effect of the atomic composition of the surface on the electron surface states in topological insulators A<Stack><Subscript>2</Subscript><Superscript>V</Superscript></Stack>B<Stack><Subscript>3</Subscript><Superscript>VI</Superscript></Stack>

The results of the theoretical investigation of the surface electronic structure of A₂^VB₃^VI compounds containing topologically protected surface states are reported. The ideal Bi₂Te₃, Bi₂Se₃, and Sb₂Te₃ surfaces and surfaces with an absent external layer of chalcogen atoms, which were observed experimentally as monolayer terraces, have been considered. It has been shown that the discrepancy between the calculated Fermi level and the value measured in the photoemission experiments can be attributed to the presence of the “dangling bond” states on the surface of the terraces formed by semimetal atoms. The fraction of such terraces on the surface has been estimated.     

Spectroscopic Properties and Energy Transfer Analysis of Tm<Superscript>3+</Superscript>-Doped BaF<Subscript>2</Subscript>-Ga<Subscript>2</Subscript>O<Subscript>3</Subscript>-GeO<Subscript>2</Subscript>-La<Subscript>2</Subscript>O<Subscript>3</Subscript> Glass

This paper reports on the spectroscopic properties and energy transfer analysis of Tm³⁺-doped BaF₂-Ga₂O₃-GeO₂-La₂O₃ glasses with different Tm₂O₃ doping concentrations (0.2, 0.5, 2.0, 2.5, 3.0, 3.5, 3.5, 4.0 wt%). Mid-IR fluorescence intensities in the range of 1,300 nm−2,200 nm have been measured when excited under an 808 nm LD for all the samples with the same pump power. Energy level structure and Judd-Ofelt parameters have been calculated based on the absorption spectra of Tm³⁺, cross-relaxation rates and multi-phonon relaxation rates have been estimated with different Tm₂O₃ doping concentrations. The maximum fluorescence intensity at around 1.8 μm has been obtained in Tm₂O₃-3 wt% sample and the maximum value of calculated stimulated emission cross-section of Tm³⁺ in this sample is about 0.48 × 10⁻²⁰ cm² at 1,793 nm, and there is not any crystallization peak in the DSC curve of this sample, which indicate the potential utility of Tm³⁺-doped BaF₂-Ga₂O₃-GeO₂- La₂O₃ glass for 2.0-μm optical fiber laser.