Characterization of size, surface charge, and agglomeration state of nanoparticle dispersions for toxicological studies

Characterizing the state of nanoparticles (such as size, surface charge, and degree of agglomeration) in aqueous suspensions and understanding the parameters that affect this state are imperative for toxicity investigations. In this study, the role of important factors such as solution ionic strength, pH, and particle surface chemistry that control nanoparticle dispersion was examined. The size and zeta potential of four TiO₂ and three quantum dot samples dispersed in different solutions (including one physiological medium) were characterized. For 15 nm TiO₂ dispersions, the increase of ionic strength from 0.001 M to 0.1 M led to a 50-fold increase in the hydrodynamic diameter, and the variation of pH resulted in significant change of particle surface charge and the hydrodynamic size. It was shown that both adsorbing multiply charged ions (e.g., pyrophosphate ions) onto the TiO₂ nanoparticle surface and coating quantum dot nanocrystals with polymers (e.g., polyethylene glycol) suppressed agglomeration and stabilized the dispersions. DLVO theory was used to qualitatively understand nanoparticle dispersion stability. A methodology using different ultrasonication techniques (bath and probe) was developed to distinguish agglomerates from aggregates (strong bonds), and to estimate the extent of particle agglomeration. Probe ultrasonication performed better than bath ultrasonication in dispersing TiO₂ agglomerates when the stabilizing agent sodium pyrophosphate was used. Commercially available Degussa P25 and in-house synthesized TiO₂ nanoparticles were used to demonstrate identification of aggregated and agglomerated samples.     

A simple route to prepare stable hydroxyapatite nanoparticles suspension

A simple ultrasound assisted precipitation method with addition of glycosaminoglycans (GAGs) is proposed to prepare stable hydroxyapatite (HAP) nanoparticles suspension from the mixture of Ca(H₂PO₄)₂ solution and Ca(OH)₂ solution. The product was characterized by XRD, FT-IR, TEM, HRTEM and particle size, and zeta potential analyzer. TEM observation shows that the suspension is composed of 10–20 nm × 20–50 nm short rod-like and 10–30 nm similar spherical HAP nanoparticles. The number-averaged particle size of stable suspension is about 30 nm between 11.6 and 110.5 nm and the zeta potential is −60.9 mV. The increase of stability of HAP nanoparticles suspension mainly depends on the electrostatic effect and steric effect of GAGs. The HAP nanoparticles can be easily transported into the cancer cells and exhibit good potential as gene or drug carrier system.     

Metal-on-oxide nanoparticles produced using laser ablation of microparticle aerosols

A continuous aerosol process has been studied for producing nanoparticles of oxides that were decorated with smaller metallic nanoparticles and are free of organic stabilizers. To produce the oxide carrier nanoparticles, an aerosol of 3–6 μm oxide particles was ablated using a pulsed excimer laser. The resulting oxide nanoparticle aerosol was then mixed with 1.5–2.0 μm metallic particles and this mixed aerosol was exposed to the laser for a second time. The metallic micron-sized particles were ablated during this second exposure, and the resulting nanoparticles deposited on the surface of the oxide nanoparticles producing an aerosol of 10–60 nm oxide nanoparticles that were decorated with smaller 1–5 nm metallic nanoparticles. The metal and oxide nanoparticle sizes were varied by changing the laser fluence and gas type in the aerosol. The flexibility of this approach was demonstrated by producing metal-decorated oxide nanoparticles using two oxides, SiO₂ and TiO₂, and two metals, Au and Ag.     

Controlled flame synthesis of αFe<Subscript>2</Subscript>O<Subscript>3</Subscript> and Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles: effect of flame configuration,flame temperature,and additive loading

Superparamagnetic iron oxide nanoparticles are used in diverse applications, including optical magnetic recording, catalysts, gas sensors, targeted drug delivery, magnetic resonance imaging, and hyperthermic malignant cell therapy. Combustion synthesis of nanoparticles has significant advantages, including improved nanoparticle property control and commercial production rate capability with minimal post-processing. In the current study, superparamagnetic iron oxide nanoparticles were produced by flame synthesis using a coflow flame. The effect of flame configuration (diffusion and inverse diffusion), flame temperature, and additive loading on the final iron oxide nanoparticle morphology, elemental composition, and particle size were analyzed by transmission electron microscopy (TEM), high-resolution TEM (HR-TEM), energy dispersive spectroscopy (EDS), and Raman spectroscopy. The synthesized nanoparticles were primarily composed of two well known forms of iron oxide, namely hematite αFe₂O₃ and magnetite Fe₃O₄. We found that the synthesized nanoparticles were smaller (6–12 nm) for an inverse diffusion flame as compared to a diffusion flame configuration (50–60 nm) when CH₄, O₂, Ar, and N₂ gas flow rates were kept constant. In order to investigate the effect of flame temperature, CH₄, O₂, Ar gas flow rates were kept constant, and N₂ gas was added as a coolant to the system. TEM analysis of iron oxide nanoparticles synthesized using an inverse diffusion flame configuration with N₂ cooling demonstrated that particles no larger than 50–60 nm in diameter can be grown, indicating that nanoparticles did not coalesce in the cooler flame. Raman spectroscopy showed that these nanoparticles were primarily magnetite, as opposed to the primarily hematite nanoparticles produced in the hot flame configuration. In order to understand the effect of additive loading on iron oxide nanoparticle morphology, an Ar stream carrying titanium-tetra-isopropoxide (TTIP) was flowed through the outer annulus along with the CH₄ in the inverse diffusion flame configuration. When particles were synthesized in the presence of the TTIP additive, larger monodispersed individual particles (50–90 nm) were synthesized as observed by TEM. In this article, we show that iron oxide nanoparticles of varied morphology, composition, and size can be synthesized and controlled by varying flame configuration, flame temperature, and additive loading.     

Effects of surfactant and polymerization method on the synthesis of magnetic colloidal polymeric nanoparticles

The addition of superparamagnetic iron nanoparticles into polystyrene matrix allows for the modification of the physical properties as well as the implementation of new features in the hybrid nanomaterials. These materials have excellent potential for biomedical and bioengineering applications. Nevertheless, it is necessary to achieve a good dispersion of magnetic nanoparticles for its successful incorporation into polymer particles. This can be obtained through the use of a stabilizer, which provides stability against aggregation. In this work, magnetic nanoparticles were dispersed using different stabilizers. Subsequently, ferrofluids stabilized using the mixture of ABEX/IGEPAL and acrylic acid (AA) were used to synthesize PS-Fe₃O₄ nanocomposites, through miniemulsion and emulsion polymerization conventional techniques. Semicontinuous and batch processes were compared, by varying surfactants and their concentrations. The PS-Fe₃O₄ nanoparticles were characterized by dynamic light scattering, scanning electron microscopy, Raman spectroscopy, and vibrating sample magnetometer. Magnetic nanoparticle dispersions show better results when the anionic and nonionic surfactants are used as a mixture rather than when used alone. Results of DLS showed that the semicontinuous process allowed obtaining monodisperse materials, whereas polidisperse systems are generated in batch process. Raman spectroscopy confirmed the presence of magnetite and polystyrene in the nanocomposites. PS-Fe₃O₄ nanoparticles showed superparamagnetic behavior with final magnetization of around 0.01 emu/g and low coercivity, properties that make them suitable for applications in wide fields of technology. Particle size (Dz), was lower than 300 nm in all cases. Moreover, the use of AA as stabilizer allows enhancing the PS-Fe₃O₄ composite properties. These findings showed that particle size, morphology, and agglomeration are directly influenced by the concentration and the type of surfactant employed.     

Interlaboratory comparison for the measurement of particle size and zeta potential of silica nanoparticles in an aqueous suspension

The Institute for Reference Materials and Measurements has organised an interlaboratory comparison (ILC) to allow the participating laboratories to demonstrate their proficiency in particle size and zeta potential measurements on monomodal aqueous suspensions of silica nanoparticles in the 10–100 nm size range. The main goal of this ILC was to identify competent collaborators for the production of certified nanoparticle reference materials. 38 laboratories from four different continents participated in the ILC with different methods for particle sizing and determination of zeta potential. Most of the laboratories submitted particle size results obtained with centrifugal liquid sedimentation (CLS), dynamic light scattering (DLS) or electron microscopy (EM), or zeta potential values obtained via electrophoretic light scattering (ELS). The results of the laboratories were evaluated using method-specific z scores, calculated on the basis of consensus values from the ILC. For CLS (13 results) and EM (13 results), all reported values were within the ±2 |z| interval. For DLS, 25 of the 27 results reported were within the ±2 |z| interval, the two other results were within the ±3 |z| interval. The standard deviations of the corresponding laboratory mean values varied between 3.7 and 6.5%, which demonstrates satisfactory interlaboratory comparability of CLS, DLS and EM particle size values. From the received test reports, a large discrepancy was observed in terms of the laboratory’s quality assurance systems, which are equally important for the selection of collaborators in reference material certification projects. Only a minority of the participating laboratories is aware of all the items that are mandatory in test reports compliant to ISO/IEC 17025 (ISO General requirements for the competence of testing and calibration laboratories. International Organisation for Standardization, Geneva, 2005b). The absence of measurement uncertainty values in the reports, for example, hindered the calculation of zeta scores.     

Self-assembling process of flash nanoprecipitation in a multi-inlet vortex mixer to produce drug-loaded polymeric nanoparticles

We present an experimental study of self-assembled polymeric nanoparticles in the process of flash nanoprecipitation using a multi-inlet vortex mixer (MIVM). β-Carotene and polyethyleneimine (PEI) are used as a model drug and a macromolecule, respectively, and encapsulated in diblock copolymers. Flow patterns in the MIVM are microscopically visualized by mixing iron nitrate (Fe(NO₃)₃) and potassium thiocyanate (KSCN) to precipitate Fe(SCN) _x ^(3−x)+. Effects of physical parameters, including Reynolds number, supersaturation rate, interaction force, and drug-loading rate, on size distribution of the nanoparticle suspensions are investigated. It is critical for the nanoprecipitation process to have a short mixing time, so that the solvent replacement starts homogeneously in the reactor. The properties of the nanoparticles depend on the competitive kinetics of polymer aggregation and organic solute nucleation and growth. We report the existence of a threshold Reynolds number over which nanoparticle sizes become independent of mixing. A similar value of the threshold Reynolds number is confirmed by independent measurements of particle size, flow-pattern visualization, and our previous numerical simulation along with experimental study of competitive reactions in the MIVM.     

Particles size effects of single domain CoFe2O4 on suspensions stability

Single domain magnetic CoFe₂O₄ nanoparticles with spinel structure were prepared by the coprecipitation method. Particles with size of 16, 20, 40 and 60 nm were synthesized by sintering the precursor at 500, 600, 800 and 900 °C, respectively. The magnetic hysteresis measurement of CoFe₂O₄ particles showed that particles were single domain particles with similar saturation magnetization (∼300 emu/cm³) at room temperature. The zeta potential study of suspensions (CoFe₂O₄-acetylacetone system) with various particle sizes showed the suspension systems had similar zeta potential values (∼40 mV). The effects of magnetic particle size on the suspension stability characterized by electrophoretic deposition yields and sediment volumes were studied. The suspension stability decreased with an increase in particle size and a flocculation threshold of particle radius a was found at 30 nm. A suspension stability theory approaching to the phenomenon was established. The theory based on the DLVO theory was developed by introducing an extra magnetic interaction force. Dormann model was adopted, in which the magnetic interactions of two spherical nanoparticles were investigated in terms of dipole-dipole interactions. Compared to DLVO, suspension's physical parameters not only zeta potential ζ and the Debye length 1/κ, but also particles' radius a brought about stable to flocculation transition in the theory.     

Determination of Particle Size Distribution by Laser Diffraction of Doped‐CeO2 Powder Suspensions: Effect of Suspension Stability and Sonication

The particle size distributions (PSDs) of metal oxide powders are often determined by analyzing suspensions of powders using laser diffraction (e.g. Malvern MasterSizer 2000). Particle agglomeration can effectively bias the resulting distribution towards “unrealistic” particle sizes. Solutions to avoid this problem must be found if a particle distribution based on the elemental or primary particle sizes is desired. In this work, the particle size distribution of doped‐CeO₂ powders was studied. These powders show a crystalline single phase structure of controlled stoichiometry as determined by X‐ray diffraction and ICP analysis. The apparent size distribution was found to be a strong function of suspension stability. Dispersant agents (PBTCA and phosphonoacetic acid) and suspension pH affected stability as characterized by zeta potential measurements. Sonication of the suspensions further enhanced particle de‐agglomeration. Finally, only the combined effect of a dispersant agent, pH adjustment of the suspension and sonication provided a primary particle size distribution. The results presented in this work can be used in the analysis of similar ceramic powders in which strong particle agglomeration is present.     

Preparation of copper–silicon dioxide nanoparticles with chemical vapor synthesis

Atmospheric pressure chemical vapor synthesis was used to produce copper nanoparticle composites in an amorphous silicon dioxide, i.e., either copper nanoparticles coated with amorphous silicon dioxide or copper nanoparticles embedded in amorphous silicon dioxide matrix. Synthesized metal–organic copper(I) complex was used as a precursor that provided well-defined ratio (1:2) of copper and silicon. The thermal decomposition of the Cu(I) complex molecule leads to homogenous nucleation and formation of copper nanoparticles which are subsequently coated with Si/SiO₂ in the gas phase. The decomposition was greatly enhanced when reductive atmosphere, i.e., H₂/N₂ 10 v% were used instead of pure nitrogen. A narrow size distribution with the geometric mean diameter of the particle agglomerates around 30 nm was observed while the primary size of the copper core particles was around 5 nm.     

Characterizing the dynamic behavior of nano-TiO<Subscript>2</Subscript> agglomerates in suspensions by photocorrelation spectroscopy

Metal oxide nanoparticles are small but easily form agglomerates in suspension, depending on the strength of particle–particle and particle–media interactions. To understand the agglomeration behavior of nanoparticles in media and relate to it to product performance testing, measurement methods are desired to characterize highly scattering metal oxide nanoparticle suspensions without dilution. In this article, we describe the advantages of using photocorrelation spectroscopy (PCS) in a backscattering detection configuration to carry out a realistic agglomerate size measurement in multiple scattering media found in most metal oxide nanoparticle suspensions. The dynamic behavior of nano-titanium dioxide (TiO₂) particles in buffer solutions of different chemical composition and pH values was investigated as a sample system using PCS. The resulting autocorrelation functions (AFs) at different time intervals, particle concentrations, and pH values were measured at several detection angles. The AF exhibits a multi-mode relaxation time feature and the calculated hydrodynamic diameters strongly depended on media composition and detection angle. This result indicates that the size and dispersion of nano-TiO₂ agglomerates are significantly affected by solution media. A measurement protocol for determining size and dispersion of metal oxide particles in media is proposed and related to a performance test found in industry.     

Enhanced transport of zerovalent iron nanoparticles in saturated porous media by guar gum

In order to ensure adequate mobility of zerovalent iron nanoparticles in natural aquifers, the use of a stabilizing agent is necessary. Polymers adsorbed on the nanoparticle surface will give rise to electrosteric stabilization and will decrease attachment to the surface soil grains. Water saturated sand-packed columns were used in this study to investigate the transport of iron nanoparticle suspensions, bare or modified with the green polymer guar gum. The suspensions were prepared at 154 mg/L particle concentration and 0.5 g/L polymer concentration. Transport experiments were conducted by varying the ionic strength, ionic composition, and approach velocity of the fluid. Nanoparticle deposition rates, attachment efficiencies, and travel distances were subsequently calculated based on the classical particle filtration theory. It was found that bare iron nanoparticles are basically immobile in sandy porous media. In contrast, guar gum is able to ensure significant nanoparticle transport at the tested conditions, regardless of the chemistry of the solution. Attachment efficiency values for guar gum-coated nanoparticles under the various conditions tested were smaller than 0.066. Although the calculated travel distances may not prove satisfactory for field application, the investigation attested the promising role of guar gum to ensure mobility of iron nanoparticles in the subsurface environment.     

Thermomagnetic determination of Fe3O4 magnetic nanoparticle diameters for biomedical applications

The utility and promise of magnetic nanoparticles (MagNPs) for biomedicine rely heavily on accurate determination of the particle diameter attributes. While the average functional size and size distribution of the magnetic nanoparticles directly impact the implementation and optimization of nanobiotechnology applications in which they are employed, the determination of these attributes using electron microscopy techniques can be time-consuming and misrepresentative of the full nanoparticle population. In this work the average particle diameter and distribution of an ensemble of Fe₃O₄ ferrimagnetic nanoparticles are determined solely from temperature-dependent magnetization measurements; the results compare favorably to those obtained from extensive electron microscopy observations. The attributes of a population of biocompatible Fe₃O₄ nanoparticles synthesized by a thermal decomposition method are obtained from quantitative evaluation of a model that incorporates the distribution of superparamagnetic blocking temperatures represented through thermomagnetization data. The average size and size distributions are determined from magnetization data via temperature-dependent zero-field-cooled magnetization. The current work is unique from existing approaches based on magnetic measurement for the characterization of a nanoparticle ensemble as it provides both the average particle size as well as the particle size distribution.     

Synthesis of nanoparticles in an atmospheric pressure glow discharge

Nanopowders are produced in a low temperature, non-equilibrium plasma jet (APPJ), which produces a glow discharge at atmospheric pressure, for the first time. Amorphous carbon and iron nanoparticles have been synthesized from Acetylene and Ferrocene/H₂, respectively. High generation rates are achieved from the glow discharge at near-ambient temperature (40–80°C), and rise with increasing plasma power and precursor concentration. Fairly narrow particle size distributions are measured with a differential mobility analyzer (DMA) and an aerosol electrometer (AEM), and are centered around 30–35 nm for carbon and 20–25 nm for iron. Particle characteristics analyzed by TEM and EDX reveal amorphous carbon and iron nanoparticles. The Fe particles are highly oxidized on exposure to air. Comparison of the mobility and micrograph diameters reveal that the particles are hardly agglomerated or unagglomerated. This is ascribed to the unipolar charge on particles in the plasma. The generated particle distributions are examined as a function of process parameters.     

Pulsed laser induced synthesis of scheelite-type colloidal nanoparticles in liquid and the size distribution by nanoparticle tracking analysis

Pulsed laser ablation (PLA) of ceramic target in liquid phase was successfully employed to prepare calcium tungstate (CaWO₄) and calcium molybdate (CaMoO₄) colloidal nanoparticles. The crystalline phase, particle morphology and optical property of the colloidal nanoparticles were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM) and Raman spectroscopy. The produced stable colloidal suspensions consisted of the well-dispersed nanoparticles showing a spherical shape. The mechanism for the laser ablation and nanoparticle forming was discussed under consideration of photo-ablation process. Nanoparticle tracking analysis using optical microscope combined with image analysis was proposed to determine the size distribution function of the prepared colloidal nanoparticles. The mean size of the CaWO₄ and CaMoO₄ colloidal nanoparticles were 16 and 29 nm, with a standard deviations of 2.1 and 5.2 nm, respectively.     

Comparison of nanoparticle measurement instruments for occupational health applications

Nanoparticles are used in many applications because of their novel properties compared to bulk material. A growing number of employees are working with nanomaterials and their exposure to nanoparticles trough inhalation must be evaluated and monitored continuously. However, there is an ongoing debate in the scientific literature about what are the relevant parameters to measure to evaluate exposure to level. In this study, three types of nanoparticles (ammonium sulphate, synthesised TiO₂ agglomerates and aerosolised TiO₂ powder, modes in a range of 30–140 nm mobility size) were measured with commonly used aerosol measurement instruments: scanning and fast mobility particle sizers (SMPS, FMPS), electrical low pressure impactor (ELPI), condensation particle counter (CPC) together with nanoparticle surface area monitor (NSAM) to achieve information about the interrelations of the outputs of the instruments. In addition, the ease of use of these instruments was evaluated. Differences between the results of different instruments can mainly be attributed to the nature of test particles. For spherical ammonium sulphate nanoparticles, the data from the instruments were in good agreement while larger differences were observed for particles with more complex morphology, the TiO₂ agglomerates and powder. For instance, the FMPS showed a smaller particle size, a higher number concentration and a narrower size distribution compared with the SMPS for TiO₂ particles. Thus, the type of the nanoparticle was observed to influence the data obtained from these different instruments. Therefore, care and expertise are essential when interpreting results from aerosol measurement instruments to estimate nanoparticle concentrations and properties.     

Application of SAXS to the study of particle-size-dependent thermal conductivity in silica nanofluids

Knowledge of the size and distribution of nanoparticles in solution is critical to understanding the observed enhancements in thermal conductivity and heat transfer of nanofluids. We have applied small-angle X-ray scattering (SAXS) to the characterization of SiO₂ nanoparticles (10–30 nm) uniformly dispersed in a water-based fluid using the Advanced Photon Source at Argonne National Laboratory. Size distributions for the suspended nanoparticles were derived by fitting experimental data to an established model. Thermal conductivity of the SiO₂ nanofluids was also measured, and the relation between the average particle size and the thermal conductivity enhancement was established. The experimental data contradict models based on fluid interfacial layers or Brownian motion but support the concept of thermal resistance at the liquid–particle interface.     

Smartphone-Based Colorimetric Method to Quantify Iron Concentration and to Determine the Nanoparticle Size from Suspensions of Magnetic Nanoparticles

Advanced uses of smartphones are changing lifestyles, and may have a great impact in materials science in the near future. In this work, the use of these devices to develop fast, simple, and cheap methods to characterize magnetic nanoparticle suspensions is tested. A series of dilutions of a wide library of magnetic nanoparticles, composed of iron oxide materials in the range between 3 and 43 nm, with two different shapes and four different coatings is prepared. The colloid color is analyzed using the RGB (red, green, blue) color model. Ratios of these parameters are correlated with the suspension iron concentration and with the nanoparticles average size. A linear relationship between the color (in particular the G/R ratio) and both the colloid iron content and the particles size is found. The link between these parameters allows the development of two new methods to determine either the concentration or the particle size of magnetic nanoparticle suspensions just by acquiring images from suspensions of iron oxide magnetic nanoparticles with a smartphone.     

Surface modification of magnetite nanoparticles for biomedical applications

The preparation of magnetite nanoparticles with narrow size distributions using poly(ethylene glycol) (PEG-COOH) or carboxymethyl dextran (CMDx) chains covalently attached to the particle surface using carbodiimide chemistry is described. Particles were synthesized by thermal decomposition and modified with 3-aminopropyl trimethoxysilane (APS) to render particles with reactive amine groups (-NH₂) on their surface. Amines were then reacted with carboxyl groups in PEG-COOH or CMDx using carbodiimide chemistry in water. The size and stability of the functionalized magnetic nanoparticles was studied as a function of pH and ionic strength using dynamic light scattering and zeta potential measurements.     

A Rapid Method for Growth of Metal Nanoparticles on Nanowire Substrates

The production of nickel and platinum nanoparticles on silica nanowire substrates using plasma-enhanced chemical vapor deposition has been investigated. Determination of particle size and particle size distribution was done using transmission electron microscopy (TEM). Ni nanoparticle diameters were found to be between 2 and 6 nm, with particle size increasing as the substrate temperature increased from 573 to 873 K. The size of Ni nanoparticles was found to be dependent on the chamber pressure during growth. The results indicate a competition between pressure-related diffusion within the vapor and dissociation of the precursor. Pt nanoparticle diameters were consistently found to be 2.5–3.0 nm at all deposition conditions. Insufficient thermal energy within the studied range results in a minimal contribution from surface diffusion, the primary mechanism for nanoparticle growth.