Intermolecular Olefin Functionalisation Involving Aryl Radicals Generated from Arenediazonium Salts

This minireview is aimed at giving an overview of recent advances in olefin functionalisation reactions involving aryl radicals generated from arenediazonium salts. Based on the well‐known Meerwein arylation, in which an aryl and a halogen substituent are coupled to an olefinic substrate, new reaction types have been developed that allow the introduction of a broad spectrum of other atoms and functional groups at the place of the original halogen atom and that are applicable to an extended range of olefinic substrates.     

Visible Light-Promoted Ring-Opening Alkenylation of Cyclic Hemiacetals through β-Scission of Alkoxy Radicals

The chemistry of alkoxy radicals was extensively explored during the period of 1960s to 1990s, but it has remained dormant for the past few decades. Recently, alkoxy radicals attract the attentions again, because new methods for generating alkoxy radical species have emerged. These newly developed methods are mainly based on the photolysis by visible light under mild conditions, thus allowing for new transformations of the carbon-centered radical species that are generated from the β-scission or hydrogen abstraction of the alkoxy radicals. Herein, we demonstrate that the alkoxy radicals derived from cyclic hemiacetals can be generated through visible-light-induced electron transfer with sodium iodide and triphenylphosphine as the catalyst. The alkoxy radicals subsequently undergo β-scission to generate carbon-centered radicals, which are trapped by cinnamic acids, aryl alkenes, vinylboronic acid and silyl enol ether to deliver the corresponding C—C bond forming products. This catalytic method for ring-opening alkenylation reaction of cyclic hemiacetal derivatives under visible-light irradiation conditions demonstrates the compatibility of the visible light-promoted alkoxy radical generation method with various carbon radical trapping processes. This work opens up new possibilities for the application of alkoxy radicals in organic synthesis.      

Visible-Light-Induced Palladium-Catalyzed Generation of Aryl Radicals from Aryl Triflates

A mild visible-light-induced Pd-catalyzed intramolecular C−H arylation of amides is reported. The method operates by cleavage of a C(sp²)−O bond, leading to hybrid aryl Pd-radical intermediates. The following 1,5-hydrogen atom translocation, intramolecular cyclization, and rearomatization steps lead to valuable oxindole and isoindoline-1-one motifs. Notably, this method provides access to products with readily enolizable functional groups that are incompatible with traditional Pd-catalyzed conditions.     

Diastereoselective Coupling of Chiral Acetonide Trisubstituted Radicals with Alkenes

The stereochemical outcome of reactions of chiral nucleophilic trisubstituted acetonide radicals with electron‐deficient alkenes is dictated by a delicate balance between destabilizing non‐bonding interactions and stabilizing hydrogen‐bonding between substituents on the α and β carbons.     

Mechanisms for the Breakdown of Halomethanes through Reactions with Ground‐State Cyano Radicals

One route to break down halomethanes is through reactions with radical species. The capability of the artificial force‐induced reaction algorithm to efficiently explore a large number of radical reaction pathways has been illustrated for reactions between haloalkanes (CX₃Y; X=H, F; Y=Cl, Br) and ground‐state (²Σ⁺) cyano radicals (CN). For CH₃Cl+CN, 71 stationary points in eight different pathways have been located and, in agreement with experiment, the highest rate constant (10⁸ s^?1 M ^?1 at 298 K) is obtained for hydrogen abstraction. For CH₃Br, the rate constants for hydrogen and halogen abstraction are similar (10⁹ s^?1 M ^?1), whereas replacing hydrogen with fluorine eliminates the hydrogen‐abstraction route and decreases the rate constants for halogen abstraction by 2–3 orders of magnitude. The detailed mapping of stationary points allows accurate calculations of product distributions, and the encouraging rate constants should motivate future studies with other radicals.     

Kinetic Modeling of Hydrogen Abstractions Involving Sulfur Radicals

One of the requisites for the development of detailed reaction networks is the availability of accurate kinetic data. Group additivity based models linking the Arrhenius parameters to structural characteristics of the transition state have proven to be a valuable tool to obtain those data. In this work, group additivity values are presented to allow a broad range of C H and S H hydrogen abstraction reactions by S radicals to be modeled. Rate coefficients in the temperature range from 300 to 1500 K are obtained by using the CBS-QB3 method in the high-pressure limit and are corrected for tunneling and anharmonicity of rotation about the transitional bond. A total of 149 reactions are studied. From these reactions, a total of 52 group additivity values and 35 resonance corrections are derived. The general applicability of the group additivity method is demonstrated for a test set containing 25 reactions. At 300 K, rate coefficients are on average reproduced within a factor of 2.8. The mean absolute deviations on the Arrhenius parameters are 2 kJ mol⁻¹ for the activation energy and 0.38 for log A in which A is the pre-exponential factor.     

Trifluoromethylation of Alkyl Radicals: Breakthrough and Challenges†

Trifluoromethylation of alkyl radicals is emerging as a powerful tool for C(sp³)–CF₃ bond formations. Based on the hypothesis of CF₃ group transfer from Cu(II)–CF₃ to alkyl radicals, a number of trifluoromethylation reactions have been developed, including trifluoromethylation of alkyl halides, decarboxylative trifluoromethylation of aliphatic carboxylic acids, C(sp³)–H trifluoromethylation, amino‐ and carbo‐trifluoromethylation of alkenes, etc. Challenges in this intriguing field are also discussed.     

Rapid Autoxidation Forms Highly Oxidized RO2 Radicals in the Atmosphere

Gas‐phase oxidation routes of biogenic emissions, mainly isoprene and monoterpenes, in the atmosphere are still the subject of intensive research with special attention being paid to the formation of aerosol constituents. This laboratory study shows that the most abundant monoterpenes (limonene and α‐pinene) form highly oxidized RO₂ radicals with up to 12 O atoms, along with related closed‐shell products, within a few seconds after the initial attack of ozone or OH radicals. The overall process, an intramolecular ROO→QOOH reaction and subsequent O₂ addition generating a next R′OO radical, is similar to the well‐known autoxidation processes in the liquid phase (QOOH stands for a hydroperoxyalkyl radical). Field measurements show the relevance of this process to atmospheric chemistry. Thus, the well‐known reaction principle of autoxidation is also applicable to the atmospheric gas‐phase oxidation of hydrocarbons leading to extremely low‐volatility products which contribute to organic aerosol mass and hence influence the aerosol–cloud–climate system.     

Recombination of Lophyl Radicals in Pyrrolidinium‐Based Ionic Liquids

The recombination of photolytically generated lophyl radicals has been investigated by UV/Vis spectroscopy in 1‐alkyl‐1‐methylpyrrolidinium bis(trifluoromethylsulfonyl)imides (NTf₂) in comparison with 1‐butyl‐3‐methylimidazolium NTf₂, dimethyl sulfoxide, and triacetin. The 1‐alkyl‐1‐methylpyrrolidinium‐based ionic liquids contain an alkyl substituent varying between butyl and decyl groups. Optically pure ionic liquids are used in these studies. Temperature‐dependent investigation of lophyl radical recombination shows an increase in the radical recombination rate with increasing temperature in each solvent, which is caused by decreasing viscosity with increasing temperature. Furthermore, the viscosity of the 1‐alkyl‐1‐methylpyrrolidinium NTf₂ increases nearly linearly within the row of these ionic liquids. In contrast, the recombination of the photolytically generated lophyl radicals is significantly faster in the ionic liquids than in the traditional organic solvents under investigation. Moreover, the recombination rate increases with the length of the alkyl chain bound at the cation of the ionic liquid at a given temperature. This may be caused by an increase in the extent of lophyl radical recombination within the solvent cage. Solvent cage effects dominate in the case of lophyl radical recombination in ionic liquids bearing a long alkyl chain or if the temperature is near the melting temperature of the ionic liquid. The positive value of the activation entropy supports this hypothesis. The results obtained are important for discussion of bimolecular radical reactions in ionic liquids.     

Exergonic and Spontaneous Production of Radicals through Beryllium Bonds

High‐level ab initio calculations show that the formation of radicals, by the homolytic bond fission of Y?R (Y=F, OH, NH₂; R=CH₃, NH₂, OH, F, SiH₃, PH₂, SH, Cl, NO) bonds is dramatically favored by the association of the molecule with BeX₂ (X=H and Cl) derivatives. This finding is a consequence of two concomitant effects, the significant activation of the Y?R bond after the formation of the beryllium bond, and the huge stabilization of the F^. (OH^., NH₂^.) radical upon BeX₂ attachment. In those cases where R is an electronegative group, the formation of the radicals is not only exergonic, but spontaneous.     

Recombination of Photogenerated Lophyl Radicals in Imidazolium‐Based Ionic Liquids

Laser flash photolysis is applied to study the recombination reaction of lophyl radicals in ionic liquids in comparison with dimethylsulfoxide as an example of a traditional organic solvent. The latter exhibits a similar micropolarity as the ionic liquids. The ionic liquids investigated are 1‐butyl‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide ( 1 ), 1‐hexyl‐3‐methylimidazolium hexafluorophosphate ( 2 ), and 1‐butyl‐3‐methylimidazolium tetafluoroborate ( 3 ). The recombination of the photolytic generated lophyl radicals occur significantly faster in the ionic liquids than expected from their macroscopic viscosities and is a specific effect of these ionic liquids. On the other hand, this reaction can be compared with the macroscopic viscosity in the case of dimethylsulfoxide. Activation parameters obtained for lophyl radical recombination suggest different, anion‐dependent mechanistic effects. Quantum chemical calculations based on density functional theory provide a deeper insight of the molecular properties of the lophyl radical and its precursor. Thus, excitation energies, spin densities, molar volumes, and partial charges are calculated. Calculations show a spread of spin density over the three carbon atoms of the imidazolyl moiety, while only low spin density is calculated for the nitrogens.     

Copper‐Catalyzed Carbotrifluoromethylation of Unactivated Alkenes Driven by Trifluoromethylation of Alkyl Radicals

We report herein an unprecedented protocol for radical carbotrifluoromethylation of unactivated alkenes. With Cu(OTf)₂ as the catalyst, the reaction of unactivated alkenes, TMSCF₃ and activated alkyl chlorides at room temperature provides the corresponding carbotrifluoromethylation products in satisfactory yields. Directed by trifluoromethylation of alkyl radicals, the method exhibits an excellent regioselectivity that is opposite to those driven by CF₃ radical addition.     

Generation of Glycosyl Radicals from Glycosyl Sulfoxides and Its Use in the Synthesis of C‐linked Glycoconjugates

We here report glycosyl sulfoxides appended with an aryl iodide moiety as readily available, air and moisture stable precursors to glycosyl radicals. These glycosyl sulfoxides could be converted to glycosyl radicals by way of a rapid and efficient intramolecular radical substitution event. The use of this type of precursors enabled the synthesis of various complex C‐linked glycoconjugates under mild conditions. This reaction could be performed in aqueous media and is amenable to the synthesis of glycopeptidomimetics and carbohydrate‐DNA conjugates.