非水介质毛细管电泳电导法检测盐酸胺碘酮

采用非水介质毛细管电泳电导检测法对盐酸胺碘酮进行检测。探讨了缓冲溶液的种类、pH和浓度、分离电压、进样时间、进样高度等因素对检测效果的影响,建立了测定盐酸胺碘酮的新方法。用乙醇作为非水介质,在30mmol L三羟甲基氨基甲烷 15mmol L柠檬酸(pH6.90)运行缓冲溶液中,盐酸胺碘酮在5～200mg L范围内的线性回归方程为y=74.94x-7.83,r=0 999。检出限(S N=3)为0.5mg L,样品回收率为98.9%。适用于含盐酸胺碘酮的药剂的分析。     

Analysis of protoberberine alkaloids in several herbal drugs and related medicinal preparations by non-aqueous capillary electrophoresis

A simple, rapid, reproducible, and universal non-aqueous capillary electrophoresis method has been developed for the separation and determination of three major active protoberberine alkaloids including berberine, palmatine, and jatrorrhizine within 7 min. The effects of the concentrations of acetic acid and electrolyte, the ratio of organic solvent, and the applied voltage on the separation were investigated. The optimum running buffer was composed of 50 mM ammonium acetate, 0.5% (v/v) acetic acid, and 10% (v/v) acetonitrile in methanol. The applied voltage was 18 kV. The analytes were detected by UV at 214 nm. The linearities between peak areas and the concentrations of the analytes were also investigated, and they exhibit excellent linear behavior over the concentration ranges (correlation coefficients: 0.9975-0.9986). The method was successfully applied to determine the three alkaloids in several families of herbal drugs (Rhizoma Coptidis, Cortex Berberidis, Cortex Phellodendri, Herba Chelidonii, Caulis Mahoniae) and their relevant medicinal preparations for the first time, and the recoveries of the three constituents ranged between 95.6-103.2% for berberine, 97.5-103.3% for palmatine, and 96.1 -103.6% for jatrorrhizine.     

Separation of phenothiazines in aqueous and non-aqueous capillary electrophoresis

Summary Four phenothiazines, promethazine, dioxypromethazine, chlorpromazine, and trifluoperazine have been separated by capillary electrophoresis using N,N,-dimethylformamide (DMF) as separation medium with UV absorbance detection. High voltage and concentrated buffer were used with small current and low electroosmosis. Good resolution and high column efficiency were obtained. Separation selectivity in DMF was different from that in water because of the different solvation interactions. The influence of buffer composition on separation selectivities and electroosmosis were also studied.     

Determination of oxytetracycline and some impurities in plasma by non-aqueous capillary electrophoresis using solid-phase extraction

Summary The potential of a non-aqueous, capillary electrophoresis (NACE) system for separating oxytetracycline from three of its impurities—tetracycline, 4-epioxytetracycline and 4-epitetracycline—using UV detection has been studied. The running buffer was: 25 mM sodium acetate, 1 mM EDTA, methanesulfonic acid, pH 4, dissolved in MeOH-ACN (50∶50,v/v). The method was also used to determine these compounds in pig plasma. A solid-phase extraction (SPE) procedure as a clean-up step has also developed. For this we tested Sep Pak C₁₈, LiChrolut EN and OASIS cartridges. OASIS cartridges were best. Recoveries were 90–100% for all compounds except EOTC which had a recovery of 74%.     

Determination of quinolizidine alkaloids in Sophora medicinal plants by capillary electrophoresis

A new capillary electrophoresis (CE) method for the determination of quinolizidine alkaloids in Sophora medicinal plants was developed. A total of seven alkaloid components (cytisine, sophocarpine, matrine, lehmannine, sophoranol, oxymatrine and oxysophocarpine) were separated within 15 min. The running buffer was a 50 mM phosphate buffer containing 1%HP-β-CD and 3.3% isopropanol. The linear calibration ranges were 5.50-88.0 μg ml⁻¹ for cytisine and lehmannine, 5.00-88.0 μg ml⁻¹ for sophocarpine and sophoranol, 5.60-89.6 μg ml⁻¹ for matrine and oxysophocarpine, and 24.0-384 μg ml⁻¹ for oxymatrine. The recoveries of the seven alkaloids were 96.0-102.9% with relative standard deviations from 1.50 to 3.00% (n = 5). The method was successfully applied to different Sophora medicinal plants including Sophora flavescens, Sophora tonkinensis and Sophora alopecuroides.     

非水介质毛细管电泳电导检测罗红霉素及其制剂

采用甲醇为分离介质，三(羟甲基)氨基甲烷-硼酸(Tris—H3BO3)为支持电解质，采用负高压，使用电导检测，对罗红霉素及其制剂进行了毛细管电泳分离检测，对电泳介质的种类、浓度、表观pH、以及操作电压和进样时问对分离的影响进行了研讨，在选定的条件下，罗红霉素的线性范围为19．0—142．0mg/L，检出限为0．8mg/L(S／N≥3)，峰面积的相对标准偏差RSD(n=6)为4．3％。3种供试品中罗红霉素的平均加标回收率分别为97．7％、94．8％、93．6％。     

Sample-stacking techniques in non-aqueous capillary electrophoresis

In sample-stacking techniques, the detection limit cannot be improved by simply increasing the length of the sample solution, because the individual electrophoretic parameters must be optimized. In an attempt to increase the amount of sample injected, as well as to focus them onto a small zone, two novel methods are proposed. One of these employs an "ultra-high conductivity zone", which was inserted between the sample zone and background solution to build an unequal conductivity gradient. The other employs a "low temperature bath". A portion of the capillary (near the junction between the sample solution and the background solution) was immersed in a low temperature bath, which served as a "pseudo-high-conductivity zone" due to the fact that conductivity would increases when the temperature is decreased. As a result, a large volume of sample injection can be achieved. Using 3,4-methylenedioxymethamphetamine as a model compound, the detection limit was determined to be 1.6 x 10(-6) M (S/N = 3) by means of normal non-aqueous capillary electrophoresis (NACE). This could be improved to 3.0 x 10(-8) M, 4.8 x 10(-9) M and 5.0 x 10(-9) M, respectively, when the normal stacking, ultra-high conductivity zone NACE-stacking and the low-temperature zone NACE-stacking methods were applied.     

The effect of water on separations in non-aqueous capillary electrophoresis systems

Summary Water, in concentrations up to 10%, has been added to organic solvents (dimethylsulphoxide,N-methylformamide, acetonitrile and methanol) used as the buffer solvents in electrophoresis media for non-aqueous capillary electrophoresis. Anionic and cationic test substances have been used to study the effect on separation selectivity and efficiency. The effect on the electroosmotic flow has also been studied. Water added in concentrations up to 0.5% had only a minor effect on the separation selectivity, efficiency or electroosmotic flow in the systems studied. These results indicate that small variations in the water-content of organic solvents are of only minor importance to the reproducibility of non-aqueous capillary electrophoresis systems. The reproducibility of selectivity might, however, be slightly improved by adding 0.1–0.5% water, because true non-aqueous solvents are likely to cause problems as a result of the variable absorption of water.     

Determination of harpagide and harpagoside inScrophularia ningpoensis by capillary electrophoresis

Summary A simple, rapid, accurate and reproducible capillary electrophoresis method has been developed for the determination of two kinds of iridoid glycoside (harpagide and harpagoside) inScrophularia ningpoensis. After a series of optimization experiments, 0.05M borate buffer solution, pH 9.80, containing 10% methanol was selected. The content of harpagide and harpagoside in both the crude drug and the prepared pieces for decoction ofScrophularia ningpoensis were successfully determined within 10 min by this method.     

Characterization of 10 species ofMahonia by capillary electrophoresis

Summary A simple, rapid and effective capillary electrophoresis method was developed for the characterization of 10 different species ofMahonia. A fingerprint of the extract of each species was constructed using a mixed buffer of borate and phosphate, containing methanol, pH 8.0. The effective electrophoretic mobility and % normalized area of each peak in electrophoregrams were evaluated to characterize various species. Three alkaloids: berberine, palmatine and jatrorrhizine were found in all 10 species. The CE technique appears to provide a powerful tool for the identification and quality control of plant drugs.     

Simultaneous separation of ergot alkaloids by capillary electrophoresis after cloud point extraction from cereal samples

A new and sensitive analytical methodology for ergot alkaloids (EA) determination from cereal samples based on cloud point extraction (CPE) prior to CE‐UV absorbance was developed. The methodology involves extraction under acid conditions and subsequent preconcentration by applying a simple, rapid and environmentally friendly low volume surfactant extraction procedure. After extraction, CE analysis was carried out by performing dilutions on preconcentrated surfactant rich phase, achieving a single peak or simultaneous alkaloids determination. A real preconcentration factor of 22 of total EA was obtained, demonstrating the efficiency of this methodology. The limits of detection were 2.6 and 2.2 μg/kg for ergotamine and ergonovine, respectively. Validation procedure revealed suitable linearity, accuracy and precision. The average extraction and clean‐up recoveries were compared with the theoretical values and were better than 92%. This method was successfully applied to the determination of EA in different varieties of commercial flour samples, two grain samples and one of the leading brands cereal‐based product for infant feeding. The high sensitivity achieved for EA determinations in real samples suggests CPE procedure as an interesting approach to improve CE‐UV visible detection limits. Moreover, the whole process could be considered as a contribution to green chemistry because nonorganic solvents were involved, demonstrating its great potential over conventional techniques.     

Determination of textile dyes by means of non-aqueous capillary electrophoresis with electrochemical detection

Eight textile dye compounds including five cationic dyes, namely, basic blue 41, basic blue 9, basic green 4, basic violet 16 and basic violet 3, and three anionic dyes, acid green 25, acid red 1 and acid blue 324, were separated and detected by non-aqueous capillary electrophoresis (NACE) with electrochemical detection. Simultaneous separations of acid and basic dyes were performed using an acetonitrile-based buffer. Particular attention was paid to the determination of basic textile dyes. The optimized electrophoresis buffer for the separation of basic dyes was a solvent mixture of acetonitrile/methanol (75:25, v/v) containing 1 M acetic acid and 10 mM sodium acetate. The limits of detection for the basic dyes were in the range of 0.1–0.7 μg mL⁻¹. An appropriate solid-phase extraction procedure was developed for the pre-treatment of aqueous samples with different matrices. This analytical approach was successfully applied to various water samples including river and lake water which were spiked with textile dyes.     

Capillary electrophoresis with LED-induced native fluorescence detection for determination of isoquinoline alkaloids and their cytotoxicity in extracts of Chelidonium majus L

In this study, we introduced a simple and sensitive method of capillary electrophoresis with ultraviolet light-emitting diode-induced native fluorescence (UV-LEDIF) detection for the determination of isoquinoline alkaloids in extracts of Chelidonium majus L. Samples were extracted with acidic methanol and the extracts were directly analysed by CE. Simultaneous determination of protopine, chelidonine, coptisine, sanguinarine, allocryptopine, chelerythrine and stylopine was performed in 20mM phosphate buffer (pH 3.1). The baseline separation of these alkaloids was finished within 20 min. As these alkaloids have native fluorescence, they were directly detected using the commercially available UV light emitting diode without troublesome fluorescent derivatisation. Satisfactory LOD values were obtained for the studied compounds considering their appearance in natural extracts. Lower limits of detection were 0.05 μg/mL for protopine, 0.06 μg/mL for stylopine and allocryptopine, 0.07 μg/mL for chelidonine, 0.22 μg/mL for sanguinarine, 1.7 μg/mL for chelerythrine and 5.5 μg/mL for coptisine. The developed method was successfully applied to determine the contents of seven alkaloids in the aerial parts of Chelidonium majus L, which varied from 0.025 to 0.763% (w/w). Also, to demonstrate the potential of the proposed CE method, an estimation of the cytotoxic properties of selected Celandine alkaloids in a natural extract was carried out.     

Highly selective and efficient separations of a wide range of acidic species in capillary electrophoresis employing non-aqueous media

Summary The novel application of CE using non-aqueous media has been studied for the separation of a range of acidic compound types. This enabled the first quantitative assay by CE employing non-aqueous media to be performed. Separation selectivity manipulation for closely related species was achieved through variation of organic solvent types and composition, ionic strength changes, alteration of pH^* values and the addition of cyclodextrin additives soluble in organic solvents. This offers a greater range of possibilities during method development than use of aqueous buffer. The generation of low operating currents permitted rapid, highly efficient and selective separations to be achieved by applying high field strengths across short capillaries. Optimised rinsing and capillary regenerating procedures were devised which allowed highly repeatable separations to be achieved with migration time repeatability below 1% RSD. Use of internal standards also allowed 1% RSD values to be obtained for injection precision. Routine operating effects were assessed and it was observed that stacking effects remain important in non-aqueous CE. Also, optimal separations are obtained when the samples are diluted in the pure solvent used to prepare the electrolyte. The application range of non-aqueous CE was appreciably extended to include acidic drugs, dyes, surfactants and preservatives.     

Capillary zone electrophoresis of basic drugs in non-aqueous acetonitrile with buffers based on a conventional pH scale

Summary The pK _a ^* values of 10 nitrogen-containing basic drugs in non-aqueous acetonitrile were determined from the pH^* dependence of their electrophoretic mobilities. The pH^* scale in the organic solvent was established using background electrolytes with known conventional pK _a ^* values, making further calibration with reference pH electrodes unnecessary. In acetonitrile the pK _a ^* values of analytes (or their conjugated cation acids, BH⁺, respectively) were 5.2±8.9 pK units>those in water. The observed change in pK _a ^* values of cationic analytes was, however, much less than the known respective change for neutral acids type HA. From the pK _a ^* values and the actual mobilities, it is possible to predict pH^* conditions to enable separation of analytes, and this was demonstrated for two pairs of common drugs.     

Non-aqueous capillary electrophoresis of biological samples after at-line solid-phase extraction

Summary Solid-phase extraction (SPE) was coupled at-line to capillary electrophoresis (CE) for the determination of a series of basic test compounds (i. e. tricyclic antidepressants). The analysis was performed using a non-aqueous CE buffer, which resulted in baseline separation of all test compounds. This is in marked contrast with CE using aqueous buffers where hardly any separation was obtained either with or without micelles. The SPE procedure was used to remove simultaneously most of the water from the sample, because no direct analysis of aqueous samples is possible when a non-aqueous CE buffer is used. With the present method the antidepressants can be determined in both urine and serum. Analyte detectability is increased up to 10-fold due to trace enrichment during the extraction process; the limits of detection (LODs; UV 214 nm) are 30–300 ng mL⁻¹ in urine and 300–1000 ng mL⁻¹ in serum. TheRSD values (n=5) of the within-day and between-day precision are below 9% and 11% respectively. Therefore, the present procedure can be used for drug monitoring.     

非水体系毛细管电泳-紫外检测法测定苯甲酸和苯甲醛

建立了用非水相体系高效毛细管电泳-紫外检测法同时测定苯甲酸和苯甲醛的新方法，考察了运行电压、非水相介质和电解质等因素的影响，在25℃下，以V（乙腈）：V（碳酸丙烯酯）=1：1的混合液为溶剂，缓冲体系中含15mmol／L十六烷基三甲基溴化铵体积分数1％乙酸，重力进样30S，运行电压20kV，毛细管总长45cm有效长度30cm，φ75μm，检测波长285nm。苯甲酸线性范围为5～40μg／mL，线性方程为：Y=13．473ρ＋13．336，相关系数r=0．9985，检出限为0．92μg／mL，RSD为3．8％。苯甲醛的线性范围75～1125μg／mL线性方程为：Y=5．2449ρ＋564．01，相关系数r=0．9997，检出限为15．60μg／mL，RSD为3．5％。已用于经空气氧化后的苯甲醛中苯甲酸和苯甲醛的测定。     

Analysis of phenolic acids by non-aqueous capillary electrophoresis after electrokinetic supercharging

Electrokinetic supercharging (EKS), a new and powerful on-line preconcentration method for capillary electrophoresis, was utilized in non-aqueous capillary electrophoresis (NACE) to enhance the sensitivity of phenolic acids. The buffer acidity and concentration, leader and terminator length and electrokinetic injection time were optimised, with the optimum conditions being: a background electrolyte of 40 mM Tris-acetic acid (pH 7.9), hydrodynamic injection of 50 mM ammonium chloride (22 s, 0.5 psi) as leader, electrokinetic injection of the sample (180 s, -10 kV), hydrodynamic injection of 20 mM CHES (32 s, 0.5 psi) as terminator, before application of the separation voltage (-25 kV). Under these conditions the sensitivity was enhanced between 1333 and 3440 times when compared to a normal hydrodynamic injection with the sample volume <3% of the capillary volume. Detection limits for the seven phenolic acids were in the range of 0.22-0.51 ng/mL and EKS was found to be 3.6-7.9 times more sensitive than large-volume sample stacking and anion selective exhaustive injection for the same seven phenolic acids.