Blends of styrene/acrylic acid copolymers and acrylic polymers

The miscibility of a series of styrene/acrylic acid copolymers with various polyacrylate and polymethacrylate homopolymers, as well as a series of styrene/methyl methacrylate copolymers, has been investigated. According to the binary interaction model, the miscibility diagram for styrene/acrylic acid copolymers with styrene/methyl methacrylate copolymers indicates that acid and ester groups interact endothermically. The phase behavior of the homopolymers also implies this. The analysis ignores the association and self-association observed for the polymer blends and the low-molecular-weight analogs used to model them. The heat of mixing of low-molecular-weight analogs depended greatly on both composition and acid structure.     

Miscibility of polysulfone blends with poly(1‐vinylpyrrolidone‐co‐styrene) copolymers and their interaction energies

The miscibility of polysulfone (PSf) with various hydrophilic copolymers was explored. Among these blends, PSf gave homogeneous mixtures with poly(1‐vinylpyrrolidone‐co‐styrene) [P(VP–S)] copolymers when these copolymers contained 68–88 wt % 1‐vinylpyrrolidone (VP). Miscible PSf blends with P(VP–S) copolymers underwent phase separation on heating caused by lower critical solution temperature (LCST)‐type phase behavior. The phase behavior depended on the copolymer composition. Changes in the VP content of P(VP–S) copolymers from 65 to 68 wt % shifted the phase behavior from immiscibility to miscibility and the LCST behavior. The phase‐separation temperatures of the miscible blends first increased gradually with the VP content, then went through a broad maximum centered at about 80 wt % VP, and finally decreased just before the limiting content of VP for miscibility with PSf. The interaction energies of binary pairs involved in PSf/P(VP–S) blends were evaluated from the phase‐separation temperatures of PSf/P(VP–S) blends with lattice‐fluid theory combined with a binary interaction model. The decrease in the contact angle between water and the membrane surface with increasing VP content in P(VP–S) copolymers indicated that the hydrophobic properties of PSf could be improved via blending with hydrophilic P(VP–S) copolymers. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1401–1411, 2003     

Novel Silanol-Containing Polymers and Their Blends

ABSTRACT

Novel 4-vinylphenyldimethylsilanol polymer (PVPDMS) and co-polymers (ST-VPDMS) were synthesized by the oxyfunctionalization re- action of the silane. The reaction was found to proceed efficiently and quantitatively. Miscibility studies indicated that about 4 molpercnt; of 4-vin- ylphenyldimethylsilanol (VPDMS) functional group in the copolymer could achieve miscibility with poly(n-butyl methacrylate) (PBMA) and poly(N-vinylpyrrolidone) (PVPr). However, for copolymers containingmore than 34 molpercnt; VPDMS, their blends with PBMA were immiscible. The observed miscibility window of ST-VPDMS/PBMA blends was as- cribed to the competition between the self-association of dimethylsilanol groups and intermolecular hydrogen bonding of dimethylsilanol groups with the carbonyl groups of PBMA. A comparison of the efficiency of the miscibility enhancement and the miscibility windows of VPDMS, p-(hexafluoro-2-isopropyl) styrene (HFPS), and phenolic-containing polymers was made in terms of such competition. The glass transition behavior of the miscible blends involving VPDMS and HFPS-containing styrene copolymers with PBMA were analyzed by the Schneider equation.     

Phase behavior in mixtures of a homopolymer and a block copolymer 1. FTIR and DSC studies

Miscibility in blends of three styrene-butadiene-styrene and one styrene-isoprene-styrene triblock copolymers containing 28%, 30%, 48%, and 14% by weight of polystyrene, respectively, with poly(vinyl methyl ether) (PVME) were investigated by FTIR spectroscopy and differential scanning calorimetry (DSC). It was found from the optical clarity and the glass transition temperature behavior that the blends show miscibility for each kind of triblock copolymers below a certain concentration of PVME. The concentration range to show miscibility becomes wider as the polystyrene content and molecular weight of PS segment in the triblock copolymers increase. From the FTIR results, the relative peak intensity of the 1100 cm^-1 region due to COCH₃ band of PVME and peak position of 698 cm^-1 region due to phenyl ring are sensitive to the miscibility of SBS(SIS)/PVME blends. The results show that the miscibility in SBS(SIS)/PVME blends is greatly affected by the composition of the copolymers and the polystyrene content in the triblock copolymers. Molecular weights of polystyrene segments have also affected the miscibility of the blends. ©1995 John Wiley & Sons, Inc.     

Properties of poly(vinyl chloride) blends with polycarbonates and chlorinated polyethylene

The miscibility of polycarbonates derived from Bisphenol A or 2,5,2′,5′-tetramethyl-Bisphenol A with poly(vinyl chloride), chlorinated poly(vinyl chloride), and vinyl chloride-vinylidene chloride copolymers has been investigated. In miscible blends a shift of the position of the carbonyl absorption in the IR spectra indicates dipolar interactions between the polymers. The miscibility of chlorinated polyethylenes and reduced poly(vinyl chloride)s among each others demonstrates besides the importance of polar groups the influence of their distribution within the polymer chains for the compatibility of the polymers. The investigations on the miscibility have been carried out by differential scanning calorimetry, and by casting films with microscopical observation of the resulting structures.     

Blends of styrene/maleic anhydride copolymers with polymethacrylates

The phase behavior of a series of styrene/maleic anhydride (SMA) copolymers with various polyacrylate and polymethacrylate homopolymers has been investigated using various techniques. None of the polyacrylates are miscible with SMA copolymers. Poly (methyl methacrylate) (PMMA) poly(ethyl methacrylate) (PEMA) and poly(n-propyl methacrylate) (PnPMA), are miscible with these copolymers over a certain range of maleic anhydride contents; whereas, the higher methacrylates apparently have no region of miscibility. For PEMA and PnPMA, the miscibility windows extend through 0% MA; hence, polystyrene is miscible with these polymethacrylates although the lower critical solution temperature is quite low. The exothermic heat of mixing styrene and ester analogs found here supports the observed miscibility of polystyrene with ethyl, n-propyl, and cyclohexyl (reported elsewhere) methacrylates. Lattice fluid interaction parameters for styrene-methacrylate obtained from the cloud points of these blends agree quite well with the Flory—Huggins parameters obtained from copolymer miscibility windows.     

苯乙烯-丁二烯-苯乙烯/聚乙烯基甲基醚共混体系相容性的FT-IR及DSC研究

嵌段高聚物、均聚物共混体系相容性是近年来研究的热点。本工作以光学显微镜、DSC、FT-IR为手段,研究了三嵌段高聚物苯乙烯-丁二烯-苯乙烯(SBS);SBS-48、SBS-30,SBS-28与聚乙烯基甲基醚共混体系的相容性。DSC结果表明,随SBS中PS含量的升高,体系相容性变好,PS段分子量增大,也有助于体系相容。FT-IR结果表明PVME中COCH_3在1100cm~(-1)附近呈现的双峰的相对强度对体系的相容性十分敏感,而由于苯环C—H振动产生的698cm~(-1)峰位却不象PS/PVME体系那样随相容性的改变而有显著的改变。总而言之,嵌段高聚物SBS/均聚物PVME共混体系中,体系的相容性依赖于嵌段高聚物在体系中的组份含量及嵌段高聚物中PS的重量百分含量,PS段分子量的大小对体系相容性也有影响。     

Stereocomplex Crystallization in Asymmetric Diblock Copolymers Studied by Dynamic Monte Carlo Simulations

Stereocomplex crystallization in asymmetric diblock copolymers was studied using dynamic Monte Carlo simulations, and the key factor dominating the formation of stereocomplex crystallites(SCs) was uncovered. The asymmetric diblock copolymers with higher degree of asymmetry exhibit larger difference between volume fractions of beads of different blocks, and local miscibility between different kinds of beads is lower, leading to lower SC content. To minimize the interference from volume fraction of beads, the SC formation in blends of asymmetric diblock copolymers was also studied. For the cases where the volume fractions of beads of different blocks are the same, similar local miscibility between beads of different blocks and similar SC content was observed. These findings indicate that the volume fraction of beads of different blocks is a key factor controlling the SC formation in the asymmetric diblock copolymers. The SC content can be regulated by adjusting the difference between the contents of beads of different blocks in asymmetric diblock copolymers.     

Phase behavior in copolymer blends of poly (p-chlorostyrene-co-o-chlorostyrene) and phenylsulfonylated poly (2,6-dimethyl-1,4-phenylene oxide)

The miscibility of random copolymers of o-chlorostyrene and p-chlorostyrene [P (oClSt-co-pClSt)] with partially phenylsulfonylated poly (2,6-dimethyl-1,4-phenylene oxide) (SPPO) copolymers has been studied, using differential scanning calorimetry (DSC) to establish T_g behavior. It already has been established that the isomeric effect of the chlorine substitution on miscibility is large. Thus the para-chloro-substituted styrenic homopolymer is miscible with all SPPOs containing more than ～ 5 mol % phenylsulfonylation, whereas the ortho-chloro-substituted homopolymer is immiscible with the entire range of SPPO copolymer compositions (and also with the respective homopolymers). As a result of this asymmetric behavior of the homopolymers, the width of the window of miscibility in blends now investigated containing copolymers with high pClSt content and SPPO is much greater than in the corresponding blends containing copolymers with large mole fraction of oClSt. These differences are reflected in the corresponding χ parameters calculated from analysis of the data. It was also found that the miscibility is temperature dependent and that the regime in the copolymer-copolymer composition plane shrank as the equilibrium temperature increased, results indicative of LCST behavior. © 1994 John Wiley & Sons, Inc.     

Effect of transesterification products on the miscibility and phase behavior of poly(trimethylene terephthalate)/bisphenol A polycarbonate blends

Blends of poly(trimethylene terephthalate)/bisphenol A polycarbonate (PTT/PC) with different compositions were prepared by melt blending. The effect of transesterification on the miscibility and phase behavior of the blends was studied using DSC, DMA, and ¹H NMR. The DMA results revealed a two-phase system with partial miscibility. DSC thermograms of the first heating scan showed a crystallizable system in which addition of PC-phase reduces the degree of crystallinity. However, the cooling and also the second heating scans revealed the complete miscibility of all the blends. It was concluded that annealing at 300 °C (to remove thermal history of the blends) caused the constituents to undergo the transesterification reaction, which changes the blend to a miscible system. The miscibility is due to formation of block copolymers with different block lengths which also suppress the crystallization of the system. The degree of randomness and sequence lengths of the copolymers were determined to analyze the extent of transesterification reaction and structure of the system. It was observed that as the reaction progresses, the degree of randomness increases and the sequence length of the copolymers decreases. Moreover, both increase of reaction time and temperature increased the extent of reaction. The results of DSC and ¹H NMR showed that a small amount of reaction is needed to change this system to a miscible blend.     

Miscibility of poly(ε-caprolactone), a semicrystalline polymer,with amorphous poly(styrene-4-hydroxystyrene) copolymers

The miscibility of poly(ε caprolactone) (PCL) with poly(styrene-co-4-hydroxystyrene) (PHS) copolymers was investigated as a function of comonomer composition experimentally and with calculations by two models; the binary interaction model and the association model. PCL was found to be completely miscible with PHS copolymers containing 5 or more mole percent of 4-hydroxystyrene (HS) comonomer units for the entire range of blend compositions. Segmental interaction densities, B_ijs, were determined by the analysis of the equilibrium melting point depression and by the application of the binary interaction model. By correlating the segmental interaction energy densities with the binary interaction model, thermodynamic miscibility is for comonomer composition over five mole percent of 4-hydroxystyrene, which is in agreement with the experimental phase behavior. Application of the association model for specific interactions to blends also predicts the experimental miscibility boundary and phase behavior for all the PHS copolymers/PCL blends. © 1995 John Wiley & Sons, Inc.     

Miscibility of poly(ϵ-caprolactone) and of poly(styrene-co-acrylonitrile) with poly(styrene-co-acrylic acid)

The miscibility of poly (?-caprolactone) (PCL) with poly (styrene-co-acrylic acid) (SAA) and of poly (styrene-co-acrylonitrile) (SAN) with SAA was examined as a function of the comonomer composition in the copolymers. For PCL/SAA blends it was found that PCL is miscible with SAA within a specific range of copolymer compositions. Segmental interaction energy densities were evaluated by analysis of the equilibrium melting point depression and application of a binary interaction model. The results suggest that the intramolecular repulsion in SAA copolymer plays an important role in inducing the miscibility. Additionally, the critical AA content in SAA for the blend to be homogeneous was predicted by correlating the segmental interaction energy densities with the binary interaction model. For SAN/SAA blends, it was also found that SAA is miscible with SAN within a specific range of copolymer compositions. From the binary interaction model, segmental interaction energy denisties between different monomer units were estimated from the miscibility map and were found to be positive for all pairs, indicating that the miscibility of the blends is due to the strong repulsion in the SAA copolymers.     

MISCIBILITY IN COPOLYMER/HOMOPOLYMER BLENDS

In order to study the miscibility of a copolymer with its corresponding homopolymers, varieties of multicomponent polymers including simple graft, muhibranch, diblock, triblock and four-arm block copolymers and so-called ABCPs were synthesized and characterized. The morphologies of the blends comprising the copolymers and the corresponding homopolymers were examined by electron microscopy. It is concluded that besides molecular weight, architecture of a copolypaers has apparent effect on the miscibility, i.e. the more complex is molecular architecture, the greater is conformation restriction in microdomain formation and the less is solubility of homopolymer in corresponding domains. In addition, a density gradient model is suggested for describing the segment distribution of the bound and free chains in block-homopolymer systems. Using this model, Helfand's theory is extended to the blends of copolymer and homopolymer predicting the miscibility which is in good agreement with the experimental results.     

离聚物及其共混体系的研究3.基于配位络合的增容作用

通过将苯乙烯(S)与少量的甲基丙烯酸(MAA)或马来酸酐(MA)共聚及甲基丙烯酸正丁酯(nBMA)与4-乙烯基吡啶(4-VP)共聚,从而在聚苯乙烯(PS)及聚甲基丙烯酸丁酯(PBMA)链上分别引入了功能基团羧酸基(-CO-OH)、酸酐基(-CO-O-CO-)和吡啶基(-N)。通过与锌盐作用获得相应的离聚物(Ionomer)。用红外光谱(IR)表征了共聚物和离聚物的形成;差热分析(DSC)测定共聚物、离聚物和共混物的玻璃化转变温度(Tg)。研究结果表明,随着共聚物中功能基团含量的增加或者共聚物形成离聚物后,其玻璃化转变温度(Tg)提高了;而共聚物的共混物因羧酸基与吡啶基间的质子转移作用而提高了相容性。特别是在引入Zn~(2+)的共混物中,增容作用十分明显,这可归结于BMAVP中的吡啶基和SMAA-Zn~(2+)(或SMA-Zn~(2+))中的Zn~(2+)间的配位络合作用的贡献。     

Interactions in SMA-SAN blends

Styrene/maleic anhydride (SMA) and styrene/acrylonitrile (SAN) copolymers have previously been shown to form miscible blends when the MA and AN contents do not differ too greatly. It is shown here that this is the result of a weak exothermic interaction between the MA and AN units by measuring the heats of mixing for appropriate liquid analogs of the various monomer units. The region of copolymer compositions for miscibility of SMA-SAN blends is predicted from the Sanchez-Lacombe mixture theory using net interaction parameters calculated from the analog calorimetry results via a simple binary interaction model for copolymers. Lower critical solution temperature behavior was observed for blends of copolymers having compositions near the edge of the miscibility region. Various glass transition, volumetric, and FTIR results are discussed in terms of the interactions observed.     

Morphology of Nylon-6 blends with styrenic polymers

The morphology of blends of styrenic polymers in a matrix of 75% Nylon-6 prepared in a Brabender Plasti-Corder was examined by scanning electron microscopy. Styrene/acrylonitrile copolymers (SAN) form smaller particles as the AN level increases owing to the corresponding decrease in the SAN–polyamide interfacial tension. Various styrenic polymers containing functional groups, maleic anhydride or oxazoline type, that can react with Nylon-6 during melt processing were added to the SAN phase which also led to a decrease in the particle size owing to the graft copolymer formed in situ. The effects of functional group type, amount of functional groups per chain, amount of functional polymer added, and the miscibility of the styrene/maleic anhydride (SMA) and SAN copolymers on the morphology of the styrenic phase in the Nylon-6 matrix are described. © 1992 John Wiley & Sons, Inc.     

Phosphonyl/hydroxyl hydrogen bonding–induced miscibility of poly(arylene ether phosphine oxide/sulfone) statistical copolymers with poly(hydroxy ether) (phenoxy resin): Synthesis and characterization

High molecular weight bisphenol A or hydroquinone‐based poly(arylene ether phosphine oxide/sulfone) homopolymer or statistical copolymers were synthesized and characterized by thermal analysis, gel permeation chromatography, and intrinsic viscosity. Miscibility studies of blends of these copolymers with a (bisphenol A)‐epichlorohydrin based poly(hydroxy ether), termed phenoxy resin, were conducted by infrared spectroscopy, dynamic mechanical analysis, and differential scanning calorimetry. All of the data are consistent with strong hydrogen bonding between the phosphonyl groups of the copolymers and the pendent hydroxyl groups of the phenoxy resin as the miscibility‐inducing mechanism. Complete miscibility at all blend compositions was achieved with as little as 20 mol % of phosphine oxide units in the bisphenol A poly(arylene ether phosphine oxide/sulfone) copolymer. Single glass transition temperatures (T_g) from about 100 to 200°C were achieved. Replacement of bisphenol A by hydroquinone in the copolymer synthesis did not significantly affect blend miscibilities. Examination of the data within the framework of four existing blend T_g composition equations revealed T_g elevation attributable to phosphonyl/hydroxyl hydrogen bonding interactions. Because of the structural similarities of phenoxy, epoxy, and vinylester resins, the new poly(arylene ether phosphine oxide/sulfone) copolymers should find many applications as impact‐improving and interphase materials in thermoplastics and thermoset composite blend compositions. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 1849–1862, 1999     

Compatibility between polystyrene copolymers and polymers in solution via hydrogen bonding

It has been applied the concept of improving miscibility, by introducing and optimizing the extent of intermolecular hydrogen-bonding interactions between two polymers. We select a commodity polymer such as polystyrene, to study the compatibility in chloroform with poly(vinyl pyridine) and poly(vinyl pyrrolidone), both considered as proton acceptors. In order to enhance polymer-polymer miscibility, polystyrene is slightly modified by copolymerization with methacrylic acid, in the first case, and with vinyl-phenol comonomer, in the second one. In this way, two series of polystyrene-based copolymers are synthesized and characterized bearing ca. 8% (w/w) of -OH groups. The miscibility gaps through the binodal ternary phase diagrams, interpolymer interaction parameter from viscometry and the evaluation of the interassociation equilibrium constant, K, by FT-IR spectroscopy serve to analyze the effect of the spacing of interacting moieties along the polystyrene chain. Our results prove that polymer-polymer miscibility increases with an increase in the methacrylic-acid content in the copolymer chain; however, when the polar group is vinyl phenol, this continuous trend is disrupted.     

改性酚氧树脂/聚(甲基丙烯酸丁酯-co-4-乙烯基吡啶)共混物的相容-络合行为和表面表征

合成了一系列不同4-乙烯基吡啶含量的聚(甲基丙烯酸丁酯-co-4-乙烯基吡啶)(BVPy)共聚物,并对酚氧树脂(Phenoxy)的仲羟基进行了不同乙酰化程度的改性.用粘度法和激光光散射(LLS)研究了BVPy/改性Phenoxy共混物在溶液中的络合行为对氢键相互作用基团密度的依赖性,并用DSC研究了共混体系在本体中的相容性.将粘度法及LLS的结果结合起来,得到了改性Phenoxy/BVPy共混体系的不相容-相容-络合转变相图.在此基础上,用XPS初步考察了共混物的相容性对其表面组成的影响.结果表明,大分子间的络合相互作用可抑制共混物的表面富集.