Cationic polyelectrolytes. III. Nitrile-group reaction of macromolecular compounds with N,N-dialkylaminoalkylamines

The chemical reaction in aqueous medium of polyacrylonitrile and acrylonitrile–vinyl acetate co-polymer using asymmetrical diamines of H₂N? (CH₂)_m? NR₂ (m = 2,3) structure was studied. It was found that the nitrile group is modified to an dialkylaminoalkylacrylamide group; also determined were the reaction conditions required to obtain the highest degree of chemical transformation of the nitrile groups. All modified compounds were characterized by analytical spectroscopy (IR and ¹H NMR) and by rheological methods. It was also established that glutaronitrile can be used as a low-molecular-weight model to study the chemical transformation of nitrile groups in polyacrylonitrile and related polymers.     

Block copolymerization with trapped radicals

Acrylonitrile–styrene, vinyl chloride–styrene and vinyl chloride–methyl methacrylate block copolymers were obtained by employing trapped radicals in polyacrylonitrile or poly(vinyl chloride) formed in a heterogeneous system by tri-n-butylboron in air as initiator. The trapped polymer radicals were activated on addition of dimethylformamide as solvent. Confirmation of block copolymers was carried out with solvent extractions, elementary analysis, and turbidimetry. In block copolymerization, the polyacrylonitrile trapped radical was more active than the poly(vinyl chloride) radical. Results of kinetic studies were used to consider the mechanism of polymerization.     

Preparation and characterization of poly(vinyl alcohol)/organo-modified cloisite Na+ with chiral L-leucine amino acid/TiO2 nanocomposites

Poly(vinyl alcohol)/organo-clay/TiO₂ nanocamposites films were prepared with 10 wt % of organo-nanoclay and various amount of TiO₂ nanoparticles. Cloisite Na⁺ has been modified via cation exchange reaction using ammonium salt of natural L-leucine amino acid as a cationic surfactant. After that poly(vinyl alcohol)/organo-nanoclay/TiO₂ nanocomposites were synthesized by dispersion of TiO₂ on the surfaces of organo-nanoclay in poly(vinyl alcohol) matrix by using ultrasonic energy. Three nanocomposites with different loading of TiO₂ were prepared and characterized by X-ray diffraction, fourier transform infrared spectroscopy, field emission type scanning electron microscope, scanning electron microscopy, transmission electron microscopy, thermogravimetric analysis and ultraviolet-visible transmission spectra. The results showed that the organo-nanoclay and TiO₂ were dispersed homogeneously in poly(vinyl alcohol) matrix and also showed improvement in their thermal properties compared with the pure poly(vinyl alcohol).     

In situ polymerization and morphology of polypyrrole obtained in water‐soluble polymer templates

Several water‐soluble polymers were used as templates for the in situ polymerization of pyrrole to determine their effect on the generation of nanosized polypyrrole (PPy) particles. The polymers used include: polyvinyl alcohol (PVA), polyethylene oxide (PEO), poly(vinyl butyral), polystyrene sulfonic acid, poly(ethylene‐alt‐maleic anhydride) (PEMA), poly(octadecene‐alt‐maleic anhydride), poly(N‐vinyl pyrrolidone), poly(vinyl butyral‐co‐vinyl alcohol‐co‐vinyl acetate), poly(N‐isopropyl acrylamide), poly(ethylene oxide‐block‐propylene oxide), hydroxypropyl methyl cellulose, and guar gum. The oxidative polymerization of pyrrole was carried out with FeCl₃ as an oxidant. The morphology of PPy particles obtained after drying the resulting aqueous dispersions was examined by optical microscopy, and selected samples were further analyzed via atomic force microscopy. Among the template polymers, PVA was the most efficient in generating stable dispersions of PPy nanospheres in water, followed by PEO and PEMA. The average size of PPy nanospheres was in the range of 160 nm and found to depend on the molecular weight and concentration of PVA. Model reactions and kinetics of the polymerization reaction of pyrrole in PVA were carried out by hydrogen ¹H NMR spectroscopy using ammonium persulfate as an oxidant. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Novel method for preparation of photocrosslinkable poly(vinyl alcohol)

A convenient procedure to prepare photosensitive poly(vinyl alcohol) by acetalization with 1-methyl-4-(p-formylstyryl)pyridinium methosulfate in heterogeneous condition is described. The reaction of fully saponified poly(vinyl alcohol) was carried out in suspension in acidic aqueous solution, while partially saponified poly(vinyl alcohol) was acetalized in acidic aqueous organic solvent. The photosensitive poly(vinyl alcohol) thus prepared was purified by filtration and successive washing out with methanol. The effect of the preparative condition on the electronic absorption spectra of the styrylpyridinium group attached to poly(vinyl alcohol) is discussed.     

Grafting onto poly(vinyl alcohol). II. Graft copolymerization of methyl acrylate and vinyl acetate and their binary mixture using γ-rays as initiator

Methyl acrylate (MA), vinyl acetate (VAc) and their binary mixture (MA + VAc) have been graft copolymerized onto poly(vinyl alcohol) using γ-rays as initiator by mutual radiation method in aqueous medium. The optimum conditions for affording maximum grafting have been evaluated. The percentage of grafting has been determined as a function of total dose, concentrations of poly(vinyl alcohol), MA, VAc, and their binary mixture. Rate of grafting (R_p) and induction period (I_p) have been determined as a function of total initial mixed monomer concentration and concentration of poly(vinyl alcohol). The graft copolymer has been characterized by thermogravimetric method. The effect of donor monomer (vinyl acetate) on percent grafting of acceptor monomer (methyl acrylate) has been explained.     

Relationship between reduction of ceric ion with poly(vinyl alcohol) and graft copolymerization

Various poly(vinyl alcohol) samples were preliminarily subjected to oxidation treatment with sodium hypochlorite, and the reduction of ceric ion and subsequently initiation in the graft copolymerization in the system containing methyl methacrylate were investigated. The reduction behavior of ceric ion could be subdivided into three parts, each of different reaction rate. In the initial stage of the reaction, there was observed rapid cleavage of the backbone chain of poly(vinyl alcohol) with ceric salts. The amount A of cleavage was proportional to the amount of ceric ion reduced at the initial fastest rate for various samples of different extents of oxidation; cleavage of 1 mole required ca. 10 moles of reduction of ceric ion. Higher carbonyl contents of the sample caused increased A. Graft polymerization was carried out in the same system with the addition of the monomer. The amounts of grafted chains produced were determined, and approximately one mole of grafted chains was obtained for per mole of cleavage. The copolymer is concluded to be blocklike in structure. The contribution of the carbonyl groups in poly(vinyl alcohol) sample to the initiation of the polymerization should be emphasized.     

Living cationic polymerization of vinyl ethers with a functional group. VII. Polymerization of vinyl ethers with a silyloxyl group and synthesis of polyalcohols and related functional polymers

Living cationic polymerizations of two silicon-containing vinyl ethers, 2-(t-butyldimethyl-silyloxyl)ethyl vinyl ether (tBuSiVE) and 2-(trimethylsilyloxyl)ethyl vinyl ether (MeSiVE), have been achieved with use of the hydrogen iodide/iodine (HI/I₂) initiating system in toluene at ?15 or ?40°C, despite the existence of the acid-sensitive silyloxyl pendants. The living nature of the polymerizations was demonstrated by linear increases in the number-average molecular weights (M?_n) of the polymers in direct proportion to monomer conversion and by their further rise upon addition of a second monomer feed to a completely polymerized reaction mixture. The polymers obtained in these experiments all exhibited very narrow molecular weight distributions (MWD) with M?_w/M?_n around or below 1.1. Desilylation of the polymers under mild conditions (with H⁺ for MeSiVE and F^? for tBuSiVE) gave poly(2-hydroxyethyl vinyl ether), a water-soluble polyalcohol with a narrow MWD. The living processes also permitted clean syntheses of amphiphilic AB block copolymers and water-soluble methacrylate-type macromonomers, all of which bear narrowly distributed segments of the polyalcohol derived from the silicon-containing vinyl ethers.     

Copolymerization of ethylene with a homologous series of vinyl esters

The effect of the alkyl group on the relative reactivity of a homologous series of vinyl esters (2) has been studied with ethylene (1) as reference monomer, tert-butyl alcohol as solvent, at 62°C and 35 kg/cm². The experimental method was based on frequent measurement of the monomer feed composition throughout the copolymerization reaction by means of quantitative gas-chromatographic analysis. Highly accurate monomer reactivity ratios were estimated in a statistically justified manner by a nonlinear least-squares method applied to the integrated copolymer equation. The reactivity of the vinyl ester monomers towards an ethylene radical increased with decreasing electron-with-drawing ability of the ester group. All vinyl ester radicals considered turned out to have the same preference for their own monomer over ethylene (constant r₂ = 1.50). Reactivity ratios are discussed in terms of the Q–e scheme and the Taft relation. It appeared that chiefly polar factors contribute to the observed relative reactivity, while probably resonance stabilization only plays a minor part. Steric hindrance seems to impair monomer reactivity, only from vinyl pivalate on. Relative reactivities of the vinyl esters are compared with literature values, where other reference monomers have been used.     

Pre-concentration and separation of copper with water-soluble poly(vinyl alcohol) and acetone system prior to its spectrophotometric determination

A water-soluble poly(vinyl alcohol)–acetone system for the pre-concentration and separation of Cu²⁺in environmental water samples has been developed. First, poly(vinyl alcohol) (PVA) was able to complex with Cu²⁺, and the reaction product, the copper–PVA complex, was precipitated in excess acetone. Sequentially, the precipitate was separated by decantation and dissolved in a minimum amount of water. Finally, the copper ions were determined by the sodium diethyldithiocarbamate spectrophotometric method. Some related parameters that might affect the recovery of the copper were investigated in detail. Under the optimum experimental conditions, the detection limit is 0.014 µg mL^?1 and the linearity range is from 0.025 to 3.00 µg mL^?1. The relative standard deviation (n?=?11) is 1.1%. The method was successfully applied to the analysis of copper in spring water, ground water, tap water, lake water and electroplating waste water. A possible mechanism of the method is also proposed.     

Graft copolymerization. II. Grafting of benzyloxyethyl methacrylate on poly(vinyl alcohol)

New graft copolymers were produced by grafting benzyloxyethyl methacrylate, the benzyl ether of HEMA, on high-molecular-weight poly(vinyl alcohol) in dimethyl sulfoxide solution with Ce⁴⁺ as initiator. The effects of the concentration of the initiator, the concentration of the monomer, the total concentration of the reactants, the temperature, and the duration of reaction on the percentages of grafting and conversion were investigated. Further, also the relationships between the initiator concentration and the percentages of grafting and of conversion in the reaction with poly(vinyl alcohol)s of lower molecular weight and of different degrees of hydrolysis were studied.     

聚乙烯醇非均相法环氧乙烷衍生化反应的研究

 采用聚乙烯醇与环氧乙烷非均相加合反应合成了不同环氧乙烷结合量的羟乙基化聚乙烯醇（ＨＥＰＶＡ）．在通过１３Ｃ－ＮＭＲ和ＩＲ对产物进行表征的基础上，讨论了反应与ＰＶＡ空间立构性及结晶性间的关系，证明了ＨＥＰＶＡ中聚氧乙烯链的存在，且其含量增长速率随反应深度的增加而增大．     

The structure of chlorinated poly(vinyl chloride). VI. Comparison of the chlorination of poly(vinyl chloride) and β,β-d2-poly(vinyl chloride) with 1H-NMR and 13C-NMR spectroscopy

Samples of chlorinated poly(vinyl chloride) (CPVC) and chlorinated β,β-dideuterated poly(vinyl chloride) (β,β-d₂-CPVC) were prepared under identical reaction conditions. The microstructure of CPVC and β,β-d₂-(CPVC) was characterized by a combination of ¹H-NMR, ¹³C-NMR spectroscopy, and analytically determined chlorine content. A difference was observed in the reaction rates of chlorination of PVC and β,β-d₂-PVC, and, in their thermal chlorination in solution, also in the structure of the chlorinated products. It was proved that in the chlorination of β,β-d₂-PVC a new chlorine atom can also enter the original? CHCl? group. The results are discussed from the standpoint of the chlorination mechanism.     

High‐Temperature Spray‐Dried Polymer/Bacteria Microparticles for Electrospinning of Composite Nonwovens

Living Micrococcus luteus (M. luteus) and Escherichia coli (E. coli) are encapsulated in poly(vinyl alcohol), poly(vinylpyrrolidone), hydroxypropyl cellulose, and gelatin by high‐temperature spray drying. The challenge is the survival of the bacteria during the standard spray‐drying process at temperatures of 150 °C (M. luteus) and 120 °C (E. coli). Raman imaging and transmission electron microscopy indicate encapsulated bacteria in hollow composite microparticles. The versatility of the spray‐dried polymer bacteria microparticles is successfully proved by standard polymer solution–processing techniques such as electrospinning, even with harmful solvents, to water‐insoluble polyacrylonitrile, polystyrene, poly(methyl methacrylate), and poly(vinyl butyrate) nanofiber nonwovens, which opens numerous new opportunities for novel applications.     

Carbon-13 spin-lattice relaxation study of linear polymers in solution

Proton-decoupled, partially relaxed, Fourier-transform NMR of ¹³C in natural abundance was used to determine spin-lattice relaxation times of individual carbons of polyisobutylene, polyacrylonitrile, poly(vinyl chloride), and poly(vinyl alcohol) in solution. It is shown that the relaxation times are independent of the difference in stereochemical configuration. From the values of the nuclear Overhauser enhancement factor it is shown that the relaxation times are independent of the difference in stereochemical configuration. From the values of the nuclear Overhauser enhancement factor it is shown that the excess spin energy from equilibration of all the ¹³C, even of quaternary carbons, in the polymers dealt with here is transferred to the lattice mainly through ¹³C-¹H dipolar interactions. It is shown that the segmental motions responsible for the spin-lattice relaxation of the polymer skeleton in solution can be described by the isotropic model within a good approximation, except for poly(vinyl alcohol) at low temperature. The activation energies of skeletal and internal methyl motions are estimated from the temperature dependence of the correlation time. Differences in the ¹³C line widths for individual carbons of polyisobutylene are discussed briefly.     

Preparation and characterization of a novel water soluble amino chitosan (amino-CS) derivative for facilitated transport of CO<Subscript>2</Subscript>

With the goal of obtaining a water soluble polymeric carrier for preparation of fixed facilitated transport membranes, a water soluble amino containing chitosan derivative was prepared through Michael-addition reaction between chitosan and ethyl acrylate followed by amidation of the ester groups with an appropriate diamine. This derivative was characterized using ¹H-NMR spectroscopy. Then, facilitated transport membranes were prepared by casting a thin layer of chitosan derivative/poly(vinyl alcohol) blend on a porous polysolfune support; and the effect of fixed carrier’s content, feed temperature and feed pressure on the CO₂ permeance, and CO₂/CH₄ selectivity of produced membranes were studied. A facilitated transport mechanism for CO₂ through this membrane was concluded.     

Synthesis of optically active polynucleotide analogs with poly(vinyl alcohol)s as backbones and adenine and 5-bromouracil derivatives as pendants

The optically active polynucleotide analogs were prepared by grafting nucleic acid base derivatives onto poly(vinyl alcohol). The (R)-ethyl 2-(5-bromouracil-1-yl)propanoate was obtained either by reaction of 5-bromouracil sodium salt with (S)-ethyl 2-[(methylsulfonyl)oxy]propanoate or reaction of 5-bromouracil with (S)-ethyl lactate in the presence of triphenyl phosphine and diethyl azodicarboxylate. Subsequent hydrolysis of the ester is aqueous acid provided the optically pure (R)-bromouracilypropanoic acid. The monomer model compounds were prepared by an esterification reaction of the pendant groups with 3-pentyl alcohol in the presence of dicyclohexylcarbodiimide and a catalytic amount of 4-pyrrolidinopyridine. Poly(vinyl alcohol) underwent reaction with the (R)-bromouracilylpropanoic acid or the (R)-adeninylpropanoic acid in the presence of dicyclohexylcarbodiimide and a catalytic amount of 4-pyrrolidinopyridine. The resulting polymers were optically active and percents grafting were almost quantitative.     

Reactions of trifluoroacetic acid with poly(vinyl alcohol) and its model compounds. Effect of neighboring hydroxyl groups on the reaction

Reactions of trifluoroacetic acid with poly(vinyl alcohol) and various model alcohols were investigated by observing the fluorine and the proton magnetic resonance spectra of the reaction mixtures. At equilibrium the degree of conversion to ester under given conditions decreased in the order isopropanol, pentane-2,4-diol, heptane-2,4,6-triol and poly(vinyl alcohol). Therefore the equilibrium constant for esterfication of a hydroxyl group is depressed by the presence of neighboring hydroxyl groups. It was observed that the steric structures of the models and polymers also affect the equilibrium position of the reaction and this is mainly ascribable to the fact that meso (isotactic) molecules react more slowly with the acid than do racemic (syndiotactic) molecules. In acid-catalyzed acetylation of the model alcohols with acetic acid no similar dependence on the steric configuration was found. Therefore trifluoroacetylation seems to be specific in this respect.     

Radical ring‐opening copolymerization behavior of vinyloxirane: Synthesis of copolymer from 2‐isopropenyl‐3‐phenyloxirane and styrene and its functionalization

The radical ring‐opening copolymerization of 2‐isopropenyl‐3‐phenyloxirane (1) with styrene (St) was examined to obtain the copolymer [copoly(1‐St)] with a vinyl ether moiety in the main chain. The copolymers were obtained in moderate yields by copolymerization in various feed ratios of 1 and St over 120 °C; the number‐average molecular weights (M_n) were estimated to be 1800–4200 by gel permeation chromatography analysis. The ratio of the vinyl ether and St units of copoly(1‐St) was estimated with the ¹H NMR spectra and varied from 1/7 to 1/14 according to the initial feed ratio of 1 and St. The haloalkoxylation of copoly(1‐St) with ethylene glycol in the presence of N‐chlorosuccinimide produced a new copolymer with alcohol groups and chlorine atoms in the side group in a high yield. The M_n value of the haloalkoxylated polymer was almost the same as that of the starting copoly(1‐St). The incorporated halogen was determined by elemental analysis. The analytical result indicated that over 88% of the vinyl ether groups participated in the haloalkoxylation. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3729–3735, 2000     

Ceric Ion Initiated Graft Polymerization onto Poly(vinyl Alcohol)

This paper describes the kinetics of the ceric ion-initiated graft co-polymerization of vinyl acetate-acrylonitrile to poly(vinyl alcohol). The graft copolymerization rate R_p was found to be first order with respect to the total concentration of the comonomer mixture [M], the concentration of vinyl alcohol repeating units [PVA], and the mole fraction of vinyl acetate in the comonomer feed mixture. R_p was independent of cerous ion. The grafting rate was independent of ceric ion above a ceric concentration of 0.0020 M but first order in ceric ion below that concentration. Rp initially increased rapidly with [H⁺] to a maximum and then decreased and levelled off at hgher [H⁺]. The rate of ceric ion disappearance was first order in [PVA], independent of [MI, and increased with increasing [H⁺] with a leveling off at high [H⁺]. A reaction mechanism.