Polymerization of butadiene initiated by the 1:1 chelate of n-butyllithium and N,N,N′,N′-tetramethylethylenediamine

Evidence is given for the species involved in the initiation and propagation steps in the polymerization of butadiene with n-butyl lithium: tetramethylethylene diamine (TMEDA) as being the monomeric butyl lithium and the solvated ion pair, (A), respectively. Species A is also produced on the metalation of polybutadiene with butyl lithium: TMEDA.     

Synthesis and characterization of soluble aromatic polyurea-amides from new N,N′--dimethyl-N,N′-bis(aminophenyl)ureas and aromatic dicarboxylic acid chlorides

Aromatic polyurea-amides having inherent viscosities of 0.36–0.67 dL/g were synthesized by the low temperature solution polycondensation of new N,N′-dimethyl-N,N′-bis(aminophenyl)ureas with various aromatic dicarboxylic acid chlorides. All the polymers were amorphous, and most of them were soluble in a variety of organic solvents such as N-methyl-2-pyrrolidone, N,N-dimethylacetamide (DMAc), m-cresol, and pyridine. Some of the polymers could be cast from the DMAc solutions into transparent and flexible films having good tensile properties. The glass transition temperatures of the polyurea-amides obtained from the bis(4-aminophenyl)-substituted ureas were 244–272°C. The temperatures of 10% weight loss under nitrogen of the polymers were in the range of 430 and 480°C. © 1995 John Wiley & Sons, Inc.     

Syndiotactic‐specific radical polymerization of N,N‐dimethylacrylamide in the presence of tartrates: A proposed mechanism for the polymerization

Radical polymerization of N,N‐dimethylacrylamide (DMAAm) was investigated in the presence of tartrates, such as diethyl L ‐tartrate, diisopropyl L ‐tartrate, and di‐n‐butyl L ‐tartrate, in toluene at low temperatures. Syndiotactic polymers were obtained in the presence of tartrates, whereas isotactic polymers were obtained in the absence of tartrates. The syndiotactic‐specificity increased with increasing amount of tartrates and with decreasing polymerization temperature. NMR analysis suggested that DMAAm and tartrates formed a 1:1 complex through double hydrogen bonding. A mechanism for the syndiotactic‐specific radical polymerization of DMAAm is proposed. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1192–1203, 2009     

N,N,N′,N′-Tetramethylethylendiamin-di(tert-butyl)aluminium-Kationen — Molekülstruktur des [(Me3C)2Al · TMEDA]⊕[(Me3C)2AlBr2]⊖

(N,N,N′,N′ -tetramethylethylendiamine) di(tert-butyl)aluminium Cations — Molecular Structure of [(Me₃C)₂Al(TMEDA)]^⊕[(Me₃C)₂AlBr₂]^? Dimeric di(tert-butyl)aluminium halides (Me₃C)₂AlX (X = Cl, Br) react with N,N,N′,N′ -tetramethylethylendiamine (TMEDA) to give three compounds: the salt-like [(Me₃C)₂Al(TMEDA)]^⊕[(Me₃C)₂AlX₂]^? 1 , characterized by crystal structure determination, and [(Me₃C)₂Al(TMEDA)]^⊕X^? 3 both with chelating amine, and the more covalent, pentane soluble (Me₃C)₂AlX(TMEDA) 2 with TMEDA bound by only one nitrogen atom. The reaction resembles the symmetrical and unsymmetrical cleavage of diborane(6). 3 (X = Cl) is also formed by treatment of 1 with boiling n-hexane in the presence of TMEDA over a period of 24 hours, while for X = Br the more covalent 2 is the main product under similar conditions. In solution 2 decomposes slowly yielding different products in dependency of the solvent: in benzene 3 and in n-pentane 1 are formed.     

Solvation of polymeric organolithium compounds. Stoichiometry and heats of interaction of N,N,N′,N′-tetramethylethylenediamine (TMEDA) with poly(styryl)lithium and poly(isoprenyl)lithium

The enthalpies of interaction of N,N,N′,N′-tetramethylethylenediamine (TMEDA) with poly-(isoprenyl)lithium and poly(styryl)lithium were measured as a function of R ([base]/[Li]) by using high-dilution solution calorimetry at 25°C. Both polymeric organolithiums exhibit initial exothermic enthalpies of interaction with TMEDA (R ? 0.1) of ca. ?13 kcal/mole. The concentration dependencies show a break (decrease) in the plot of ΔH vs. R at ca. R = 0.5 for poly(isoprenyl)lithium and at ca. R = 1.0 for poly(styryl)lithium.     

Hydrogen‐bond‐assisted syndiotactic‐specific radical polymerizations of N‐alkylacrylamides: The effect of the N‐substituents on the stereospecificities and unusual large hysteresis in the phase‐transition behavior of aqueous solution of syndiotactic poly(N‐n‐propylacrylamide)

The radical polymerizations of N‐alkylacrylamides, such as N‐methyl‐(NMAAm), N‐n‐propyl‐(NNPAAm), N‐benzyl‐(NBnAAm), and N‐(1‐phenylethyl)acrylamides (NPhEAAm), at low temperatures were investigated in the absence or presence of hexamethylphosphoramide (HMPA) and 3‐methyl‐3‐pentanol (3Me3PenOH), which induced the syndiotactic specificities in the radical polymerization of N‐isopropylacrylamide (NIPAAm). In the absence of the syndiotactic‐specificity inducers, the syndiotacticities of the obtained polymers gradually increased as the bulkiness of the N‐substituents increased. Both HMPA and 3Me3PenOH induced the syndiotactic specificities in the NNPAAm polymerizations as well as in the NIPAAm polymerizations. The addition of 3Me3PenOH into the polymerizations of NMAAm significantly induced the syndiotactic specificities, whereas the tacticities of the obtained polymers were hardly affected by adding HMPA. In the polymerizations of bulkier monomers, such as NBnAAm and NPhEAAm, HMPA worked as the syndiotactic specificity inducer at higher temperatures, whereas 3Me3PenOH hardly influenced the stereospecificity, regardless of the temperatures. The phase‐transition behaviors of the aqueous solutions of poly(NNPAAm)s were also investigated. It appeared that the poly (NNPAAm) with racemo dyad content of 70% exhibited unusual large hysteresis between the heating and cooling processes. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4575–4583, 2008     

Synthesis of substituted polymethylenes by radical polymerization of N,N,N′,N′-tetraalkylfumaramides and their characterization

Radical polymerization of N,N,N′,N′-tetraalkylfumaramides (TRFAm) bearing methyl, ethyl, n-propyl, isopropyl, and isobutyl groups as N-substituents (TMFAm, TEFAm, TnPFAm, TIPFAm, and TIBFAm, respectively) was investigated. In the polymerization of TEFAm initiated with 1,1′-azobiscyclohexane-1-carbonitrile (ACN) in benzene, the polymerization rate (R_p) was expressed as follows: R_p = k [ACN]^0.28 [TEFAm]^1.26, and the overall activation energy was 102.1 kJ/mol. The introduction of a bulky alkyl group into N-substituent of TRFAm decreased the R_p in the following order: TMFAm > TEFAm > TnPFAm > TIBFAm > TIPFAm ～ 0. The relative reactivities of these monomers were also investigated in radical copolymerization with styrene (St) and methyl methacrylate (MMA). In copolymerization of TRFAm (M₂) with St (M₁), monomer reactivity ratios were determined to be r₁ = 1.07 and r₂ = 0.20 for St–TMFAm, and r₁ = 1.88 and r₂ = 0.11 for St–TEFAm, from which Q₂ and e₂ values were estimated to be 0.35 and 0.44 for TMFAm, and 0.19 and 0.47 for TEFAm, respectively. The other TRFAm were also copolymerized with St, but copolymerization with MMA gave polymers containing a small amount of TRFAm units. The polymer from TRFAm consists of a less-flexible poly(N,N-dialkylaminocarbonylmethylene) structure. The solubility and thermal property of the polymers were also investigated.     

Stable conformations of N,N,N′,N′- tetraisopropylthiuram disulphide and monosulphide found in low temperature 1H N.m.r. spectra

¹H N.m.r. spectra of N,N,N′,N′-tetraisopropylthiuram disulphide and monosulphide in CS₂ suggested that internal rotations both around the carbamate C? N and isopropyl–nitrogen bonds are restricted at low temperatures. As a result, both compounds exist as two dl pairs of isomers with respect to rotation around the isopropyl–nitrogen bond. The spectra further suggest that one pair of the isomers is subdivided into two sets of dl pairs, possibly owing to the restriction of torsion of the two carbamate planes with respect to each other. Possible conformations of these three dl pairs of isomers are proposed, and the assignments of each proton signal are described.     

Solvation of polymeric organolithium compounds. Heats of interaction of tetrahydrofurans and N,N,N′,N′-tetramethylethylenediamine (TMEDA) with poly(butadienyl)lithium

The enthalpies of interaction of tetrahydrofuran, 2,5-dimethyltetrahydrofuran and N,N,N′,N′-tetramethylethylenediamine (TMEDA) with 0.02M benzene solutions of poly(butadienyl)lithium (M _N～4,000) were measured as a function of R([base]/[Li]) using highdilution, solution calorimetry at 25°C. At low R values (ca. 0.2) the enthalpy of interaction of THF ( — 6.1 kcal/mol) is only 1.5 kcal/mol more exothermic than with 2,5-dimethyltetrahydrofuran and both decrease rapidly with increasing R value. These results indicate that this coordination process is much less sensitive to the steric requirements of the base than analogous processes for poly(isoprenyl)lithium and poly(styryl)lithium. The concentration dependence for the enthalpy of interaction with TMEDA falls off precipitously with increasing R values from an initial value of ?12.4 kcal/mol at R = 0.14. These results suggest either a higher degree of association or a less favorable dissociation equilibrium constant for poly(butadienyl)lithium versus poly(isoprenyl)lithium.     

Selective crystallization of di-sec-butylmagnesium. N,N,N′,N′-tetramethylethylenediamine from solutions containing mixtures of normal-butyl and secondary-butyl isomers

Found to crystallise selectively from treatment of commercial ^sBu(ⁿBu)Mg solutions with N,N,N′,N′-tetramethylethylenediamine (TMEDA), the complex (^sBu₂Mg·TMEDA) is mononuclear in the crystal state and undergoes a solvation-desolvation equilibrium in arene solution. The crystal structure is noteworthy for the large C---Mg---C bond angle of 133.6(2)°, attributable to the branched nature of the alkyl substituents. This angular distortion is thought to encourage the partial loss of TMEDA from Mg centres in solution.     

N,N, N′,N′-Tetrabutyl-3,6-dioxaoctan-dithioamid,ein ionophor mit Cd2+-Selektivität,Röntgenstrukturanalyse des Cd2+-Komplexes

N, N, N′,N′-Tetrabutyl-3,6-dioxaoctan-dithioamid, an Ionophore with Cd²⁺-Selectivity The CdCl₂-complex of N, N, N′, N′-tetrabutyl-3, 6-dioxaoctanedithioamide crystallizes with the composition [Ligand. Cd₂Cl₄] in space group P1 , a= 14.140, b= 10.025, c= 12.173 Å, α = 95.59°. β = 102.06°. γ = 85.50° Z= 2. Each ligand coordinates two Cd₂₊-ions. Adjacent cations are bridged by two Cl⁺-ions such that infinite bands along the b-axis are formed.     

N,N,N′,N′‐Tetraalkylaminoazoxybenzene Derivatives; Convenient Synthesis and Mechanistic Study

N,N,N′,N′‐tetraalkyaminoazoxybenzene derivatives were conveniently prepared by the coupling of N,N‐dialkylnitrosoaniline in the presence of acetone and KOH. The reaction mechanism was proposed and investigated, and the structure of compound 3b was also confirmed by single crystal X‐ray diffractometry.     

N,N,N′,N′-Tetrabutyl-3,6-dioxaoctan-dithioamid,Ionophor mit Selektivität für Cd2+

N,N,N′,N′-Tetrabutyl-3,6-dioxaoctane-dithioamide, an Ionophore with Selectivity for Cd²⁺ The dioxa-dithioamide 3 behaves as a highly selective ionophore for Cd²⁺ in solvent polymeric membranes. It induces cation-permselectivity in these membranes with a transference number of 1 for Cd(NO₃)₂- and of 2 for CdCl₂-solutions. In the presence of a proton carrier, 3 may be used to selectively pump Cd²⁺ through membranes by coupling with a pH gradient.     

New,strong cationic hydrogels: Preparation of N,N,N′,N′‐tetraallyl piperazinium dibromide and its copolymers with N,N‐diallyl morpholinium bromide

N,N,N′,N′‐tetraallyl piperazinium dibromide (TAP) has been prepared in high yields by quaternization of N,N′‐diallyl piperazine with allyl bromide. Herein, we have described preparation of nonhydrolysable, strong, cationic hydrogels by copolymerization of TAP with N,N‐diallyl morpholinium bromide (DAM) in the presence of t‐butyl hydroperoxide as initiator in aqueous solutions. Because the monomer and crosslinker involved consist of quaternary amine functions, these hydrogels are fully cationic and do not carry hydrolysable groups. Contrary to expectations, the quaternary amine hydrogels presented do not show any super absorbency, instead dry gel particles in water undergo spontaneous disintegration with an audible bursting of the particles due to instantaneous, high osmotic pressure. Whereas, in KBr or HBr solutions, the swellings are relatively slow. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1006–1013, 2000     

N,N,N′,N′,N″‐penta(methyl acrylate)diethylenetriamine: A novel ligand for atom transfer radical polymerization of methyl methacrylate

A novel ligand, N,N,N′,N′,N″‐penta (methyl acrylate) diethylenetriamine (MA₅‐DETA), was synthesized by the reaction of diethylenetriamine with methyl acrylate in almost quantitive yield. The polymerizations of methyl methacrylate with MA₅‐DETA as the ligand and α,α‐dichlorotoluene (DCT) and ethyl 2‐bromoisobutyrate (2‐EBiB) as the initiators, respectively, under different conditions were examined. The polymerization with CuCl/MA₅‐DETA/DCT was closely controlled in bulk and gave polymers with quite narrow molecular weight distributions (M_w/M_n's) of 1.16–1.29. The polymerization with the system CuBr/MA₅‐DETA/EBiB in bulk gave high activity. However, the system was not well controlled and gave the polymers with M_w/M_n = 1.35–1.53. The solution polymerization in anisole with CuBr/MA₅‐DETA/EBiB showed a better‐controlled nature. Moreover, the addition of CuBr₂ into the aforementioned system can further improve its controllability. The M_w/M_n's of the resulting polymers ranged from 1.11 to 1.21. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1963–1969, 2004     

Highly stable electrochromic polyamides based on N,N‐bis(4‐aminophenyl)‐N′,N′‐bis(4‐tert‐butylphenyl)‐1,4‐phenylenediamine

A new triphenylamine‐containing aromatic diamine monomer, N,N‐bis(4‐aminophenyl)‐N′,N′‐bis(4‐tert‐butylphenyl)‐1,4‐phenylenediamine, was synthesized by an established synthetic procedure from readily available reagents. A novel family of electroactive polyamides with di‐tert‐butyl‐substituted N,N,N′,N′‐tetraphenyl‐1,4‐phenylenediamine units were prepared via the phosphorylation polyamidation reactions of the newly synthesized diamine monomer with various aromatic or aliphatic dicarboxylic acids. All the polymers were amorphous with good solubility in many organic solvents, such as N‐methyl‐2‐pyrrolidinone (NMP) and N,N‐dimethylacetamide, and could be solution‐cast into tough and flexible polymer films. The polyamides derived from aromatic dicarboxylic acids had useful levels of thermal stability, with glass‐transition temperatures of 269–296 °C, 10% weight‐loss temperatures in excess of 544 °C, and char yields at 800 °C in nitrogen higher than 62%. The dilute solutions of these polyamides in NMP exhibited strong absorption bands centered at 316–342 nm and photoluminescence maxima around 362–465 nm in the violet‐blue region. The polyamides derived from aliphatic dicarboxylic acids were optically transparent in the visible region and fluoresced with a higher quantum yield compared with those derived from aromatic dicarboxylic acids. The hole‐transporting and electrochromic properties were examined by electrochemical and spectro‐electrochemical methods. Cyclic voltammograms of the polyamide films cast onto an indium‐tin oxide‐coated glass substrate exhibited two reversible oxidation redox couples at 0.57–0.60 V and 0.95–0.98 V versus Ag/AgCl in acetonitrile solution. The polyamide films revealed excellent elcterochemical and electrochromic stability, with a color change from a colorless or pale yellowish neutral form to green and blue oxidized forms at applied potentials ranging from 0.0 to 1.2 V. These anodically coloring polymeric materials showed interesting electrochromic properties, such as high coloration efficiency (CE = 216 cm²/C for the green coloring) and high contrast ratio of optical transmittance change (ΔT%) up to 64% at 424 nm and 59% at 983 nm for the green coloration, and 90% at 778 nm for the blue coloration. The electroactivity of the polymer remains intact even after cycling 500 times between its neutral and fully oxidized states. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2330–2343, 2009     

Polyamides based on diamines and N,N′-dimethyldiamines derived from biphenol

Aromatic-aliphatic polyamides containing a biphenyl mesogen were prepared by both interfacial and solution polymerization reactions. Substitution of the amide nitrogen with methyl groups yielded polymers with significantly different properties than the unsubstituted polyamides. The methyl-substituted polyamides had improved thermal stability, significantly lower meltin temperatures, and greater solubility in common solvents. Copolyamides were also synthesized which contained different flexible spacer units that varied in the number of methylene groups. No evidence for the presence of liquid crystalline phases could be obtained in either the unsubstituted polyamides or polyamides containing N-methylated amide units. © 1994 John Wiley & Sons, Inc.     

Synthesis of polypyrimidoquinazolinetetraones from N,N′-bis(mesyloxy)pyromellitimide and aromatic diamines

A novel class of polypyrimidoquinazolinetetraones was synthesized by the polymerization of N,N′-bis(mesyloxy)pyromellitimide with aromatic diamines in N-methyl-2-pyrrolidone in the presence of triethylamine as an acid acceptor. The polymerization proceeded probably through the formation of ring-opened adducts, followed by elimination and rearrangement yielding polyamide-isocyanates, which in turn were cyclized to give polypyrimidoquinazolinetetraones. These polymers, which were soluble in strong acids, had inherent viscosities in the range of 0.17–0.27. Thermogravimetric analyses indicated that they began to decompose at around 450°C in air.     

Preparation and properties of N-phenylated aromatic polyamides from N,N′-diphenyl-p-phenylenediamine and aromatic diacid chlorides

N-Phenylated aromatic polyamides and copolyamides derived from N,N′-diphenyl-p-phenylenediamine, isophthaloyl, and terephthaloyl chloride were prepared by high-temperature solution polycondensation in anisole at 155°C. Factors that influenced the reaction, such as monomer concentration, solvent, temperature, and time, were studied to determine the optimum conditions for the preparation of high molecular weight polymers. Compared with analogous unsubstituted aromatic polyamides, the N-phenylated polymers exhibited better solubility in chlorinated and amide solvents, reduced crystallinity, and lower glass transition temperatures (above 200°C). All polymers except the polyterephthalamide could be solvent-cast, as well as hot-pressed, into transparent flexible films.     

Hydrogen‐bond‐assisted stereocontrol in the radical polymerization of N‐isopropylacrylamide with secondary alkyl phosphate: The effect of the bulkiness of the ester group

The radical polymerization of N‐isopropylacrylamide (NIPAAm) in toluene at low temperatures was investigated in the presence of triisopropyl phosphate (TiPP). The addition of TiPP induced a syndiotactic specificity that was enhanced by the polymerization temperature being lowered, whereas atactic polymers were obtained in the absence of TiPP, regardless of the temperature. Syndiotactic‐rich poly(NIPAAm) with a racemo dyad content of 65% was obtained at ?60 °C with a fourfold amount of TiPP, but almost atactic poly(NIPAAm)s were obtained by the temperature being lowered to ?80 °C. This result contrasted with the result in the presence of primary alkyl phosphates, such as tri‐n‐propyl phosphate: the stereospecificity varied from syndiotactic to isotactic as the polymerization temperature was lowered. NMR analysis at ?80 °C revealed that TiPP predominantly formed a 1:1 complex with NIPAAm, although primary alkyl phosphates preferentially formed a 1:2 complex with NIPAAm. Thus, it was concluded that a slight increase in the bulkiness of the added phosphates influenced the stoichiometry of the NIPAAm–phosphate complex at lower temperatures, and consequently a drastic change in the effect on the stereospecificity of NIPAAm polymerization was observed. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3899–3908, 2005