Nanocrystalline Metal Oxides as Promising Materials for Gas Sensors for Hydrogen Sulfide

Results of investigations aimed at creating a material possessing selective sensitivity to gaseous hydrogen sulfide are presented. Polycrystalline films of doped tin dioxide were obtained by pyrolysis of an aerosol of appropriate organometallic compounds. The effect of copper and nickel oxides on the electrical properties, actual structure, and composition of polycrystalline tin dioxide films was studied. The influence of trace amounts of gaseous H₂S on the electrical conductivity of the films was analyzed in detail.     

Organometallic chemistry related to applications for microelectronics in Japan

This is meant to be a brief overview of the developments of research activities in Japan on organometallic compounds related to their use in electronic and optoelectronic devices. The importance of organometallic compounds in the deposition of metal and semiconductor films for the fabrication of many electronic and opto-electronic devices cannot be exaggerated. Their scope has now extended to thin-film electronic ceramics and high-temperature oxide superconductors. A variety of organometallic compounds have been used as source materials in many types of processing procedures, such as metal–organic chemical vapor deposition (MOCVD), metalorganic vapor-phase epitaxy (MOVPE), metal–organic molecular-beam epitaxy (MOMBE), etc. Deposited materials include silicon, Group III–V and II–VI compound semiconductors, metals, superconducting oxides and other inorganic materials. Organometallic compounds are utilized as such in many electronic and optoelectronic devices; examples are conducting and semiconducting materials, photovoltaic, photochromic, electrochromic and nonlinear optical materials. This review consists of two parts: (I) research related to the fabrication of semiconductor, metal and inorganic materials; and (II) research related to the direct use of organometallic materials and basic fundamental research.     

过渡金属氧化物掺杂对铜锰氧化物催化CO氧化性能的影响

以乙酸铜和乙酸锰为铜锰前驱体,以NH₄HCO₃为沉淀剂,相应金属硝酸盐为掺杂剂,采用共沉淀法制备了不同过渡金属氧化物掺杂的铜锰氧化物催化剂.?采用N₂物理吸附、X射线衍射,氢气-程序升温还原和原位红外漫反射光谱等方法对催化剂进行了表征,考察了系列催化剂上CO反应性能.?结果表明,掺杂过渡金属氧化物可以调变催化剂对CO的吸附能力,进而影响催化剂性能.     

A microscopic coupled-cluster treatment of electronic correlations in Hubbard models

We recently applied the coupled-cluster method (CCM ) with considerable success to several novel quantum spin-lattice systems in the infinite bulk limit. In this article, we extend our CCM analysis to the electronic Hubbard models. In particular, based on a systematic approximation scheme within the CCM , we investigate the zero-temperature properties of Hubbard models at half-filling and with a single hole on a general bipartite lattice. Our aim was to provide the CCM framework for a systematic calculation of the properties of Hubbard models. © 1995 John Wiley & Sons, Inc.     

Estimation of correlation energy and the exchange constant in yttrium barium copper oxides

The Hubbard on-site correlation energy U and the transfer energy t for the electron hop between the copper d_x2-y2 and the overlapping p orbital of the nearest-neighbour oxygen atom are estimated based on the XPS results on these compounds. Using these parameters, it is predicted that the BIS spectra should show a peak around 2 eV. The strength of the exchange interaction between the copper atoms is estimated to be 0.14 eV in the planes and 0.07 eV in the chains, correct to fourth order in perturbation theory for a half-filled d_x2-y2 band.     

Towards accurate all-electron quantum Monte Carlo calculations of transition-metal systems: spectroscopy of the copper atom

In this work we present all-electron fixed-node diffusion Monte Carlo (FN-DMC) calculations of the low-lying electronic states of the copper atom and its cation. The states considered are those which are the most relevant for the organometallic chemistry of copper-containing systems, namely, the (2)S, (2)D, and (2)P electronic states of Cu and the (1)S ground state of Cu(+). We systematically compare our FN-DMC results to CCSD(T) calculations using very large atomic-natural-orbital-type all-electron basis sets. The FN-DMC results presented in this work provide, to the best of our knowledge, the most accurate nonrelativistic all-electron correlation energies for the lowest-lying states of copper and its cation. To compare our results to experimental data we include the relativistic contributions for all states through numerical Dirac-Fock calculations, which for copper (Z=29) provide almost the entire relativistic effects. It is found that the fixed-node errors using Hartree-Fock nodes for the lowest transition energies of copper and the first ionization potential of the atom cancel out within statistical fluctuations. The overall accuracy achieved with quantum Monte Carlo for the nonrelativistic correlation energy (statistical fluctuations of about 1600 cm(-1) and near cancelation of fixed-node errors) is good enough to reproduce the experimental spectrum when relativistic effects are included. These results illustrate that, despite the presence of the large statistical fluctuations associated with core electrons, accurate all-electron FN-DMC calculations for transition metals are nowadays feasible using extensive but accessible computer resources.     

DFT Study of Methylene Blue Adsorption on ZnTiO3 and TiO2 Surfaces (101)

The search for alternative materials with high dye adsorption capacity, such as methylene blue (MB), remains the focus of current studies. This computational study focuses on oxides ZnTiO₃ and TiO₂ (anatase phase) and on their adsorptive properties. Computational calculations based on DFT methods were performed using the Viena Ab initio Simulation Package (VASP) code to study the electronic properties of these oxides. The bandgap energy values calculated by the Hubbard U (GGA + U) method for ZnTiO₃ and TiO₂ were 3.17 and 3.21 eV, respectively, which are consistent with the experimental data. The most favorable orientation of the MB adsorbed on the surface (101) of both oxides is semi-perpendicular. Stronger adsorption was observed on the ZnTiO₃ surface (−282.05 kJ/mol) than on TiO₂ (–10.95 kJ/mol). Anchoring of the MB molecule on both surfaces was carried out by means of two protons in a bidentate chelating (BC) adsorption model. The high adsorption energy of the MB dye on the ZnTiO₃ surface shows the potential value of using this mixed oxide as a dye adsorbent for several technological and environmental applications.     

A theoretical study on the pure and doped ZnO nanoclusters as effective nanobiosensors for 5-fluorouracil anticancer drug adsorption

The electronic sensitivity and effectiveness of the pristine, Fe,- Mg-, Al- and Ga-doped ZnO nanoclusters interacted with 5-fluorouracil (5-FU) anticancer drug are theoretically investigated in the gas phase using the B3LYP/wB97XD density functional theory calculations with LANL2DZ basis set. It is concluded that 5-FU adsorption on the doped nanoclusters has relatively higher adsorption energy as compared with the pristine zinc oxide. A number of thermodynamic parameters, such as band gap energy (E_g), adsorption energy (E_ad), molecular electrostatic potential, global hardness (η) and density of electronic states, are attained and compared. Also, calculated geometrical parameters and electronic properties for the studied systems indicate that Mg- and Ga-doped Zn₁₂O₁₂ present higher sensitivity to 5-FU compared with the pristine nanocluster. Theoretical results reveal that adsorption of 5-FU on the doped nanoclusters is influenced by the electronic conductance of the nanocluster. Therefore, Mg- and Ga-doped ZnO can be considered as promising nanobiosensors for detection of 5-FU in medicine.     

Coordination Chemistry of [Co(acac)2] with N‐Doped Graphene: Implications for Oxygen Reduction Reaction Reactivity of Organometallic Co‐O4‐N Species

Hybridization of organometallic complexes with graphene‐based materials can give rise to enhanced catalytic performance. Understanding the chemical structures within hybrid materials is of primary importance. In this work, archetypical hybrid materials are synthesized by the reaction of an organometallic complex, [Co^II(acac)₂] (acac=acetylacetonate), with N‐doped graphene‐based materials at room temperature. Experimental characterization of the hybrid materials and theoretical calculations reveal that the organometallic cobalt‐containing species is coordinated to heterocyclic groups in N‐doped graphene as well as to its parental acac ligands. The hybrid material shows high electrocatalytic activity for the oxygen reduction reaction (ORR) in alkaline media, and superior durability and methanol tolerance to a Pt/C catalyst. Based on the chemical structures and ORR experiments, the catalytically active species is identified as a Co‐O₄‐N structure.     

Effect of titanium,antimony, and ruthenium doping on tin dioxide adsorption properties. Quantum-chemical modeling

The influence of the composition of oxides supports on the specific electroactive surface area of Pt in the catalysts, the platinum nanoparticles dispersion, and Pt contents in the catalysts was studied. The Sb-doped SnO₂ oxides with various Sb-doping levels were prepared as a supports of platinum catalysts in polymer electrolyte membrane fuel cells. Density functional theory simulation of Ti, Sb, and Ru doping of tin dioxide and interaction of the doped surfaces with platinum cluster Pt₁₉ have been carried out. All calculations were performed in PBE exchange–correlation functional, with periodic boundary conditions and projector-augmented waves (PAW) basis set. The calculation results were compared with the experimental data X-ray diffraction and transmission electron microscopy (TEM). It was shown that Sb doping of tin dioxide (in quantity of less than 10%, that is, the quantity which cannot provoke significant defects of crystal structure of the supports) leads to a significant increase in a number of platinum clusters adsorbed from the colloidal solution onto the supports surface which results to an increase of the platinum cluster interaction with the supports. The calculated and experimental results are in close fit.     

Evaluation of exchange‐correlation functionals in comparison to B3LYP for the description of silicon and Cu‐doped silicon clusters

Several developed exchange‐correlation functionals in density functional theory have been systematically applied to describe the geometries and electronic properties of small silicon (Si_n+1, n < 5) and doped silicon (CuSi_n) clusters. The performance of the various approaches is done with their critical comparison with B3LYP and available high level wave function methods. Our calculations indicate that all functional give reasonable results. Further, OLYP/6‐311+G* approach generally agrees with B3LYP results. The good performance of OLYP is of significant interest knowing that the hybrid functionals are computationally more demanding than nonhybrid schemes. So, we recommend OLYP/6‐311+G* approach for studying the doped silicon clusters and understanding the electronic properties of silicon by the presence of doped metal impurities. © 2007 Wiley Periodicals, Inc. Int J Quantum Chem, 2008     

Pseudopotential calculations for methyl compounds of zinc and magnesium

Pseudopotentials and valence basis sets to be used in calculations for organometallic compounds of zinc and magnesium have been tested in calculations for the M(CH₃)_n (M = Zn, Mg; n = 1,2) molecules. Valence correlation effects are treated at the SDCI and CEPA levels. The capability of a polarization potential on zinc to account for the valence shell contracting effect of core valence correlation is studied. Properties considered are geometries, force constants, Mulliken populations, ionization potentials, atomization, and binding energies. Differences in bonding between the two dimethyl compounds are discussed.     

Cluster analysis of the full configuration interaction wave functions of cyclic polyene models

The first two members of the cyclic polyene homologous series are studied over a wide range of the coupling constant using the Hubbard and Pariser–Parr–Pople model Hamiltonians. The full and various limited configuration interaction (CI ) correlation energies and wave functions are calculated exploiting the unitary group approach. The formalism for the cluster analysis of the exact wave function expressed through the unitary group formalism electronic Gelfand states is developed and applied to the full CI wave functions of the cyclic polyene models studied. It is shown that the connected tetraexcited clusters become essential in the fully correlated limit and that their contribution also significantly increases with electron number even for the coupling constant corresponding to the spectroscopic parametrization of the model Hamiltonians used.     

The application of microbalance technique in study of the high temperature superconductors

Many physical-chemical properties of oxide superconductors depend on oxygen content and its distribution in the sample. Investigations of the thermal decomposition of the oxide superconductors in dynamic vacuum are valuable, particularly in view of the high oxygen diffusion coefficient in these cuprates. Dynamic vacuum protects against the readsorption of oxygen from the environment. Samples of the high-temperature superconductors were synthesised from stoichiometric mixtures of high-purity oxides and carbonates.The lattice parameters of all preparations were controlled, in both initial and final experiments using a Stadi P (Stoe) diffractometer with a positron-sensitive detector (CuK radiation). The oxygen content was measured by iodometric titration with a reproducibility of at least 0.02.DC four probe resistivity measurements were performed on pellets to which copper contacts were attached by using silver paint. Thermogravimetric analyses (TG) were performed by using a Cahn RG ultramicrobalance system.The purpose of the present paper is to show the application of microbalance technique in study of high-temperature superconductors.This revised version was published online in November 2005 with corrections to the Cover Date.     

Exploring the applicability of density functional tight binding to transition metal ions. Parameterization for nickel with the spin-polarized DFTB3 model

In this work, we explore the applicability and limitations of the current third order density functional tight binding (DFTB3) formalism for treating transition metal ions using nickel as an example. To be consistent with recent parameterization of DFTB3 for copper, the parametrization for nickel is conducted in a spin-polarized formulation and with orbital-resolved Hubbard parameters and their charge derivatives. The performance of the current parameter set is evaluated based on structural and energetic properties of a set of nickel-containing compounds that involve biologically relevant ligands. Qualitatively similar to findings in previous studies of copper complexes, the DFTB3 results are more reliable for nickel complexes with neutral ligands than for charged ligands; nevertheless, encouraging agreement is noted in comparison to the reference method, B3LYP/aug-cc-pVTZ, especially for structural properties, including cases that exhibit Jahn–Teller distortions; the structures also compare favorably to available X-ray data in the Cambridge Crystallographic Database for a number of nickel-containing compounds. As to limitations, we find it is necessary to use different d shell Hubbard charge derivatives for Ni(I) and Ni(II), due to the distinct electronic configurations for the nickel ion in the respective complexes, and substantial errors are observed for ligand binding energies, especially for charged ligands, d orbital splitting energies and splitting between singlet and triplet spin states for Ni(II) compounds. These observations highlight that future improvement in intra-d correlation and ligand polarization is required to enable the application of the DFTB3 model to complex transition metal ions. © 2018 Wiley Periodicals, Inc.     

Anab initio investigation of Cu2Se and Cu4Se2

Summary Experimentally known copper selenium clusters show extraordinary geometrical features, especially short Cu-Cu distances. We report the first theoretical investigation of Cu₂Se and Cu₄Se₂. Various quantum chemical methods (SCF, MP2, CPF, CCSD, CCSD(T), LDF) are applied to determine the importance of dynamic electron correlation. We find that inclusion of correlation does not essentially change the electronic structure of the clusters but has a strong influence on geometries. To reduce the computational effort we apply effective core potentials (ECPs) in combination with small, but carefully optimized basis sets. The applicability of simple modellings of correlation energies for approximate inclusion of correlation effects in SCF geometry optimizations is tested.     

Field Effect Devices Based on SrTiO3 Gate Dielectrics for the Investigation of Charge Carrier Mobility in Macromolecular Films

Field effect devices (FET) allow an exhaustive investigation of the electronic transport properties of innovative semiconductors of interest for new applications in modern electronics. In this contribution, we report on the fabrication and characterization of FET devices where SrTiO₃ (STO) single crystals and organic macromolecular compounds, such as doped and undoped polythiophenes, or poly(N-vinylcarbazole) (PVK), are used as insulating and semiconducting layers, respectively. STO, with ε_r of about 300, offers the possibility to strongly modulate the charge carrier density in the organic films, thus overcoming the limitations related to the use of more conventional oxides.     

Effect of Ni and Pd on the geometry, electronic properties, and active sites of copper clusters

The geometry, electronic properties, and active sites of copper clusters doped with Ni or Pd atoms, Cu(n)()(-)(1)M (n = 2-6; M = Ni, Pd) have been investigated using first-principles methods. Planar structures are energetically favorable in Cu(n)()(-)(1)Ni (n = 2-6). However, for Pd-doped clusters, three-dimensional structures are competitive in energy, and for n = 6, the most stable structure is not planar. Several properties of doped copper clusters present odd-even oscillations as the number of copper atoms grow. The different atomic ground-state configuration of Ni and Pd determines the bonding and electronic properties of doped copper clusters. The interaction between impurities and copper atoms can modify the chemical hardness and active sites of doped copper clusters markedly inducing directionality in the reactivity. This effect is relevant to the behavior of catalysts as well as in the growth of metallic films.     

N‐band Hubbard models. III. Boson–fermion and interaction–boson models for high‐Tc superconductivity

In this series of articles (I, II), N‐band Hubbard models have been considered for strongly correlated electron systems, which are realized in d–p, π–d, π–R, and σ–R conjugated systems. The magnetism and superconductivity of these systems have been elucidated in terms of effective exchange integrals (J), which are calculated by first‐principle methods. In part III of this series, the BCS–BEC crossover theory, has been introduced to elucidate the physical foundation of our J and JP model for the high‐T_c superconductivity (HTSC). The boson–fermion (BF) model for this theory is found useful for a reasonable explanation of the experimental phase diagrams of HTSC. The underlying physics of the BF model is different from that of the slave boson field‐theoretical model assuming spinon–holon condensations in the low dimension. The interaction boson model (IBM) for nuclear matter is also employed to describe the cooperative mechanisms of electron–phonon (EP), spin fluctuation (SF), charge fluctuation (CF), and many‐bands (MB) effects. This phenomenological model is useful for pictorial understanding and for the theoretical explanation of the cooperative mechanisms: (EP + SF), (SF + CF), (EP + SF + MB), etc. These are also investigated in analogy to BF model of fermionic gases, where the Feshbach resonance between boson and fermion is responsible for their coupling. The implications of these theoretical results are discussed in relation to recent ALPES and STM experiments for HTSC, which suggest the contributions of SF (J) and EP (P) interactions. The recently discovered superconductivity of boron‐doped diamond is examined as an example of two‐band sigma‐radical (σ–R) conjugated systems. Finally, the bipolaron model is briefly discussed in relation to boson–fermion model via EP interaction to superconductivity. © 2005 Wiley Periodicals, Inc. Int J Quantum Chem, 2006