首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 46 毫秒
1.
A new homologous series of thermally stable thermotropic liquid crystalline poly(arylidene-ether)s based on 4-tertiary-butyl-cyclohexanone moiety was synthesised by solution polycondensation of 4,4′-diformyl-α,ω-diphenoxyalkanes, Ia–f, or 4,4′-diformyl-2,2′-dimethoxy-α,ω-diphenoxyalkanes, IIa–f, with the 4-tertiary-butyl-cyclohexanone monomer. A model compound III was synthesised from the monomer with benzaldehyde and characterised by elemental and spectral analyses. The inherent viscosities of the resulting polymers were in the range of 0.18–0.92 dL/g. The mesomorphic properties of these polymers were studied as a function of the diphenoxyalkane space length. Their thermotropic liquid crystalline properties were examined by differential scanning calorimetry (DSC) and optical polarising microscopy and demonstrated that the resulting polymers form nematic mesophases over wide temperature ranges. The thermal properties of those polymers were evaluated by thermogravimetric analysis and DSC measurements and correlated to their structural units. X-ray analysis showed that polymers having some degree of crystallinity in the region 2θ = 5–60°. In addition, the morphological properties of selected examples were tested by scanning electron microscopy.  相似文献   

2.
4,4′-(Alkylene-α,ω-dioxy)bis(phenylsuccinic anhydride)s and bis(glutaric anhydride)s were obtained by the condensation of 4,4′-diformyl-α,ω-diphenoxyalkanes with ethyl cyanoacetate followed by the addition of potassium cyanide or meldrum acid (2,2-dimenthyl-1,3-dioxane-4,6-dione), hydrolysis with concentrated hydrochloric acid, and dehydration with acetic anhydride. Alkylene groups were ethylene, trimethylene, and tetramethylene. Polyimides were prepared from these anhydrides with 4,4′-diaminodiphenyl ether, 4,4′-diaminodiphenyl sulfide, and 4,4′-diaminodiphenylmethane through thermal ring closure of polyamic acids obtained by solution polymerization in dimethylacetamide, and thermal stability of these polyimide film was examined by thermogravimetric analysis.  相似文献   

3.
Two novel series of poly(arylidene-ether)s and copoly(aryl-idene-ether)s were synthesized by polycondensation of 4,4-diformyl-α,ω-diphenoxyalkane and 4,4′-diformyl-2,2′-dimeth-oxy-α,ω-diphenoxyalkane with cyclohexanone and/or cyclo-pentanone. The inherent viscosity of the polymers and copolymers thus prepared were in the range of 0.42–1.27 dL/g. The phase behavior of these polymers was studied by differential scanning calorimetry (DSC), optical polarizing microscopy using a heated stage, and thermogravimetric analyses. Almost all the polymers and copolymers exhibited thermotropic liquid crystalline properties. In most cases, the mesophase extends up to 310°C, where thermal decomposition prevents further observation. Methoxy substituents, on the benzene ring of these polymers, lower the transition temperature significantly. The morphology of polymer IXf was examined by scanning electronic microscope.  相似文献   

4.
The syntheses of five polyaromatic pyrazine polymers are described. These polymers were synthesized by the condensation of bis-α-haloaromatic ketones with ammonia in N,N-dimethylacetamide (DMAc) solvent in the presence of air or peroxides. The condensation of bis-p-(α-bromoacetyl)benzene (IIIa), bis-p,p′-(α-chloroacetyl)biphenyl (IIIb) bis-p,p′-(α-chloroacetyl)diphenyl ether (IIIc), bis-p,p′-(α-chloroacetyl)diphenylmethane (IIId), and α,α′-dibenzoyl-α,α′-dibromo-p-xylene (V) under these reaction conditions gave poly[2,5-(1,4-phenylene)pyrazine] (IVa), poly[2,5-(4,4′-biphenylene)-pyrazine] (IVb), poly[2,5-(4,4′-oxydiphenylene)pyrazine] (IVc), poly[2,5-(4,4′-methylenediphenylene)pyrazine] (IVd), and poly[2,5-(1,4-phenylene)-3,6-diphenylpyrazine] (VI), respectively. Thermogravimetric analysis (TGA) of these polymers showed them to be thermally stable up to the temperature range of 450–550°C in air for short periods of time. The inherent viscosities of these polymers ranged from 0.18 to 1.30.  相似文献   

5.
Polyisophthalamides and polyterephthalamides were prepared by the solution polycondensation of the corresponding diacyl chlorides with 4,4′-diaminobibenzyl, trans-4,4′-diaminostilbene, and 4,4′-diaminotolan in N,N-dimethylacetamide (DMAc). Polypyromellitimides were synthesized in two steps by the ring-opening polyaddition of pyromellitic dianhydride with the aromatic diamines in DMAc, followed by thermal cyclodehydration. The amorphous polyisophthalamides were soluble in some amide solvents containing lithium chloride, while the polyterephthalamides having fair degree of crystallinity were insoluble in these solvents. The thermal stability of these aromatic polymers decreased in the order of the tolan-containing polymers > the stilbene-containing polymers > the bibenzyl-containing polymers, both in air and under nitrogen.  相似文献   

6.
A series of novel dialdehydes as new monomers, 4,4′-diformyl-α,ω-diphencarbonylalkane, 4,4′-diformyl-3,3′-methoxy-α,ω-diphencarbonylalkane, and 4,4′-diformyl-3,3′-ethoxy-α,ω-diphencarbonylalkane, was prepared from aliphatic diacid chloride with p-hydroxybenzaldehyde, vanillin, and 3-ethoxy-4-hydroxybenzaldehyde, respectively. A series of poly(amide-azomethine-ester)s was prepared by condensation of 4,4′-diaminoanilide with 4,4′-diformyl-α,ω-α,ω-diphencarbonylalkane, 4,4′-diformyl-3,3′-methoxy-α,ω-diphencarbonylalkane, and 4,4′-diformyl-3,3′-ethoxy-α,ω-diphencarbonylalkane, respectively. Their thermotropic liquid crystalline properties were examined by DSC microscope observations. In most cases, the mesophase extends up to ca. 288–380°C, where thermal decomposition prevents further observation.  相似文献   

7.
A novel monomer, 2,2‐bis‐(4′‐fluorobenzoylphenoxy)‐4,4,6,6‐bis[spiro‐(2′,2″‐dioxy‐1′, 1′‐biphenylyl)] cyclotriphosphazene, was synthesized and polymerized with 4,4′‐difluorobenzophenone as a comonomer and 4,4′‐isopropylidenediphenol or 4,4′‐(hexafluoroisopropylidene) diphenol in N,N‐dimethylacetamide at 162 °C for 4 h to give two series of aromatic cyclolinear phosphazene polyetherketones containing bis‐spiro‐substituted cyclotriphosphazene groups. The structure of the monomer was confirmed by 1H, 13C, and 31P NMR. The effect of the incorporation of the bis‐spiro‐substituted cyclotriphosphazene group on the thermal properties of these polymers was investigated by DSC and thermogravimetric analysis. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2993–2997, 2001  相似文献   

8.
Liquid crystalline polymers containing sodium sulfonate groups pendant to the polymer backbone were synthesized by an interfacial condensation reaction of brilliant yellow, a sulfonate-containing monomer, with 4,4′-dihydroxy-α,α′-dimethyl benzalazine and a 50/50 mixture of sebacoyl and dodecanedioyl dichlorides. Polymers containing up to ca. 4 mol% brilliant yellow were characterized by elemental analysis and ultraviolet spectroscopy. The polymers were thermally stable to about 300°C, and they exhibited a broad nematic mesophase region of 70–100°C. The solution viscosity behavior in chloroform suggested that intramolecular associations of the sulfonate groups occurred at low polymer concentrations and intermolecular associations predominated at higher concentrations.  相似文献   

9.
The viologen‐type dialdehyde of [N,N′‐bis(methylsalicylaldehyde)‐4,4′‐bipyridinium] dichloride (DA) was synthesized by reacting 5‐chloromethylsalicylaldehyde and 4,4′‐bipyridine. Then a new polymeric Schiff base ligand (PSBL) was synthesized by the condensation reaction of ethylenediamine and DA in methanol under reflux conditions. Afterwards, new ionic metallo‐Schiff base polymers (IMSPs) were synthesized by reacting PSBL with VO(acac)2, ZnCl2 and CuCl2 via coordination chelation. DA, PSBL and IMSPs were characterized using various analytical methods and spectral techniques. The solid‐state electrical conductivities of PSBL and IMSPs were studied. The electrical conductivity of these polymers at 300 K ranged from 1.30 × 10?5 to 4.52 × 10?10 Ω?1 m?1, which means they are potential organic and metallo‐organic semiconductors.  相似文献   

10.
Abstract

Three novel dicarboxylic acids, bis-4,4′-[N-4(4′-hydroxycarbonyl phenyleneoxy) phthalimido] diphenyl sulfone, bis-4,4′-[N-4(4′-hydroxycarbonyl phenyleneoxy) phthalimido] diphenyl methane, and bis-4,4′-[N-4(4′-hydroxycarbonyl phenyleneoxy) phthalimido] diphenyl ether, were synthesized, and several polyesterimides were prepared from diacid chlorides and bisphenols by solution polycondensation. The polymers were obtained in 65–88% yield and had inherent viscosities in the 0.18 to 0.64 dL/g range. The polymers were characterized by IR, elemental analysis, x-ray, TGA, DSC, and solubility tests. All the polymers were readily soluble in polar aprotic solvents and had a 10% weight loss temperature above 375°C in nitrogen.  相似文献   

11.
A series of polyamide-azomethine-ethers was prepared by condensation of 4,4′-diaminoanilide with 4,4′-diformyl-α,ω-diphenoxyalkane, 4,4′-diformyl-3,3′-methoxy-α,ω-diphenoxyalkane, and 4,4′-diformyl-3,3′-ethoxy-α,ω-diphenoxyalkane, respectively. The inherent viscosities of polymers were obviously increased when the polymers were treated by heat under nitrogen at 220°C. The thermotropic liquid crystalline properties were examined by DSC, microscope observations, and TGA. All of the polymers, except polymer A-1, exhibit thermotropic liquid crystalline properties. They also exhibit threaded and/or Schlieren textures examined by the polarizing microscope which indicate a nematic phase. In most cases, the mesophase exists up to ca. 400-460°C shown by TGA study. The mesophase cannot exist above 400-460°C because of the thermal decomposition.  相似文献   

12.
3,3′‐Dichloro‐N,N′‐biphthalimide (3,3′‐DCBPI), 3,4′‐dichloro‐N,N′‐biphthalimide (3,4′‐DCBPI), and 4,4′‐dichloro‐N,N′‐biphthalimide (4,4′‐DCBPI) were synthesized from 3‐ or 4‐chlorophthalic anhydrides and hydrazine in glacial acetic acid. The yield of 3,3′‐DCBPI (90%) was much higher than that of 4,4′‐DCBPI (33%) because of the better stability of the intermediate, 3‐chloro‐N‐aminophthalimide, and 3,3′‐DCBPI. A series of hydrazine‐based polyimides were prepared from isomeric DCBPIs and 4,4′‐thiobisbenzenethiol (TBBT) in N,N‐dimethylacetamide in the presence of tributylamine. Inherent viscosity of these polymers was in the range of 0.51–0.69 dL/g in 1‐methyl‐2‐pyrrolidinone (NMP) at 30 °C. These polyimides were soluble in 1,1,2,2‐terachloroethane, NMP, and phenols. The 5% weight‐loss temperatures (T5%s) of the polymers were near 450 °C in N2. Their glass‐transition temperatures (Tgs) determined by dynamic mechanical thermal analysis and differential scanning calorimetry increased according to the order of polyimides based on 4,4′‐DCBPI, 3,4′‐DCBPI, and 3,3′‐DCBPI. The hydrolytic stability of these polymers was measured under acid, basic, and neutral conditions and the results indicated that the order was 3,3′‐DCBPI/TBBT > 3,4′‐DCBPI/TBBT > 4,4′‐DCBPI/TBBT. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4933–4940, 2007  相似文献   

13.
The telechelic α,ω‐alkyne‐poly(methyl methacrylate) (alkyne‐PMMA‐alkyne) was synthesized by single electron transfer radical coupling (SETRC) reaction of α‐alkyne, ω‐bromine‐poly(methyl methacrylate) (alkyne‐ PMMA‐Br). The propargyl 2‐bomoisobutyrate (PgBiB) was first prepared to initiate atom transfer radical polymerization (ATRP) of methyl methacrylate at 45°C using CuCl/1,1,4,7,10,10‐hexamethyl triethylenetetramine (HMTETA) as homogeneous catalytic system. Then the SETRC reaction was conducted at room temperature in the presence of nascent Cu(0) and N,N,N′,N′ ′,N′ ′‐pentamethyldiethyllenetriamine (PMDETA). The precursor alkyne‐PMMA‐Br and coupled product alkyne‐PMMA‐alkyne were characterized by GPC and 1H NMR in detail.  相似文献   

14.
Viologens that bore a terminal vinyl group were synthesized by four sequences of reactions: (1) N-vinylbenzyl-N′-n-propyl-4,4′-bipyridinium bromide chloride (V) was synthesized by the reaction of 4-(4′-pyrodyl)-N-n-propyl pyridinium bromide (III) with vinylbenzyl chloride; (2) N-β-acrylamidoethyl-N′-n-propyl-4,4′-bipyridinium dibromide (IX) was synthesized by the Menschutkin reaction of III with 2-aminoethyl bromide hydrobromide and subsequent reaction with acryloyl chloride; (3) N-β-methacryloyloxyethyl-N′-n-propyl-4,4′-bipyridinium dibromide and its analogs (XI) were synthesized by the reactions of III with the corresponding acyloxyalkyl bromides; and (4) N-vinyloxycarbonylmethyl-N′-n-propyl-4,4′-bipyridinium bromide chloride (XIII) was synthesized by the reaction of III with vinyl chloroacetate. With the exception of monomer XIII in which hydrolysis in large extent was observed during attempted polymerization, the synthesized monomers polymerized smoothly in aqueous solutions by a conventional radical procedure. Comparisons of the absorption peaks of the radical cations produced by reductions in aqueous solutions with those produced in films by ultraviolet (UV) irradiation indicate that the radical cations of polymers are associated intramolecularly in aqueous solutions.  相似文献   

15.
Two new coordination polymers of lanthanum(III) benzoate having pyridine N-oxide and 4,4′-bipyridyl-N,N′-dioxide as ancillary ligands are synthesized and characterized. Different binding modes of the N-oxide are demonstrated; pyridine N-oxide binds as a bridging ligand, whereas 4,4′-bipyridyl-N,N′-dioxide is monodentate.  相似文献   

16.
《European Polymer Journal》2006,42(8):1786-1797
New aliphatic–aromatic α,ω-diols containing sulfur in aliphatic chain: 4,4′-(ethane-1,2-diyl)bis(benzenethioethanol) [EBTE], 4,4′-(ethane-1,2-diyl)bis(benzenethiopropanol) [EBTP], 4,4′-(ethane-1,2-diyl)bis(benzenethiohexanol) [EBTH], 4,4′-(ethane-1,2-diyl)bis(benzenethiodecanol) [EBTD], and 4,4′-(ethane-1,2-diyl)bis(benzenethioundecanol) [EBTU] were prepared by the condensation reaction of 4,4′-(ethane-1,2-diyl)bis(benzenethiol) with suitable halogen alcohols in aqueous sodium hydroxide solution. Thermoplastic nonsegmented polyurethanes containing sulfide linkages were synthesized from these diols, and hexane-1,6-diyl diisocyanate (HDI) or 4,4′-methylenediphenyl diisocyanate (MDI) by solution and melt polymerization. The reaction was carried out at 1:1 or 1.05:1 molar ratios of isocyanate and hydroxy groups in the presence of dibutyltin dilaurate as a catalyst.The structures of the diols were determined by using elemental analysis, FTIR and 1H NMR spectroscopy, and X-ray diffraction analysis. Thermal characteristics of the diols were determined by using differential scanning calorimetry (DSC). The polymers were studied to describe their structures and physicochemical, thermal (by DSC and thermogravimetric analysis) and tensile properties as well as Shore A/D hardness.All the polyurethanes possessed partially crystalline structures. Their melting temperatures were in the range of 94–179 °C (HDI) and 105–207 °C (MDI). The MDI-based polyurethanes showed higher tensile strengths, up to ∼50 MPa.  相似文献   

17.
Two new aromatic diamines, 2,2′-dimethyl-4,4′-diaminoazobenzene [benzenamine-(3,3′-dimethyl-4,4′-azobis)] and 2,2′-dichloro-4,4′-diaminoazobenzene [benzenamine-(3,3′-dichloro-4,4′-azobis)] were synthesized and their structures confirmed by IR, UV-visible, 1H-NMR, 13C-NMR, and mass spectra. With these diamines, 16 aromatic polyamides were synthesized by both low-temperature solution and phosphorylation polycondensation methods. The polymers were characterized by viscosity, solubility, IR, UV visible, TGA, and DTA studies.  相似文献   

18.
A new diimide‐dicarboxylic acid, 2,2′‐dimethyl‐4,4′‐bis(4‐trimellitimidophenoxy)biphenyl (DBTPB), containing a noncoplanar 2,2′‐dimethyl‐4,4′‐biphenylene unit was synthesized by the condensation reaction of 2,2′‐dimethyl‐4,4′‐bis(4‐minophenoxy)biphenyl (DBAPB) with trimellitic anhydride in glacial acetic acid. A series of new polyamide‐imides were prepared by direct polycondensation of DBAPB and various aromatic diamines in N‐methyl‐2‐pyrrolidinone (NMP), using triphenyl phosphite and pyridine as condensing agents. The polymers were produced with high yield and moderate to high inherent viscosities of 0.86–1.33 dL · g−1. Wide‐angle X‐ray diffractograms revealed that the polymers were amorphous. Most of the polymers exhibited good solubility and could be readily dissolved in various solvents such as NMP, N,N‐dimethylacetamide (DMAc), N,N‐dimethylformamide (DMF), dimethyl sulfoxide, pyridine, cyclohexanone, and tetrahydrofuran. These polyamide‐imides had glass‐transition temperatures between 224–302 °C and 10% weight loss temperatures in the range of 501–563 °C in nitrogen atmosphere. The tough polymer films, obtained by casting from DMAc solution, had a tensile strength range of 93–115 MPa and a tensile modulus range of 2.0–2.3 GPa. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 63–70, 2001  相似文献   

19.
In the present study, the four series of N-acetyl/N-carbothioamide/N-carboxamide/N-phenyl-based new bispyrazolines have been synthesized. These symmetrical bisheterocyclic products were prepared efficiently from the ring-closure reactions of new bischalcones 2a-d with appropriate cyclizing agents (hydrazine hydrate, thiosemicarbazide, semicarbazide, and phenyl hydrazine) under the alkaline ethanolic conditions. The compounds 2a-d were obtained by treating hydroxyl-substituted chalcone 1 with various dihalogenated reagents (α,α′-dibromo-o/m/p-xylene and 4,4′-bischloromethyl-diphenyl) in anhydrous K2CO3/dry acetone/Bu4N+I medium. The structures of all the newly synthesized products have been authenticated with the help of their IR, 1H-NMR, 13C-NMR, and ESI-MS spectral data and their purity was corroborated with the help of elemental analysis and thin-layer chromatography results. The in vitro antimicrobial screening of the newly synthesized intermediates and final bisheterocycles has also been performed by using the serial tube dilution technique against the selected number of microorganisms. The final bisheterocycles revealed better antibacterial and antifungal potencies as compared to their corresponding bischalcones. Among the symmetrical bisheterocyclic products, N-acetyl and N-carbothioamide-substituted bispyrazolines were found to exhibit potential antimicrobial properties than the other products.  相似文献   

20.
The conjugated carboxy-functionalized terpyridyl bimetal ruthenium complex [(tdctpy)Ru(dctpy-(ph)4-dctpy)Ru(tdctpy)][PF6]4 and [2]rotaxane by self-assembly of [(tdctpy)Ru(dctpy-(ph)4-dctpy)Ru(tdctpy)][PF6]4 with β-cyclodextrin are reported as sensitizer for dye-sensitized solar cells (DSSCs), where tdctpy?=?4′-p-tolyl-4,4″-dicarboxy-2,2′?:?6,2″-terpyridine, dctpy?=?4,4″-dicarboxy-2,2′?:?6,2″-terpyridine and dctpy-(ph)4-dctpy represents a bridging ligand where two 4,4″-dicarboxy-2,2′?:?6′,2″-terpyridine units are connected through four phenyl spacers in the 4′-position. The DSSCs fabricated utilizing these materials give typical electric power conversion efficiency of 0.013–0.523% under air mass (AM) 1.5, 100?mW?cm?2 irradiation at room temperature. The terpyridyl bimetal ruthenium complex [(tdctpy)Ru(dctpy-(ph)4-dctpy)Ru(tdctpy)][PF6]4 with conjugated-bridge chains displayed much higher conversion efficiency compared with the carboxy-functionalized terpyridyl monometal ruthenium complex [tdctpy-Ru-(idctpy)][PF6]2, where idctpy?=?4′-p-iodophenyl-4,4″-dicarboxy-2,2′?:?6,2″-terpyridine. [2]Rotaxane displayed the highest electric power conversion efficiency of 0.523% when β-cyclodextrin was introduced into the conjugated terpyridyl bimetal ruthenium complex and formed [2]rotaxane.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号