Molecular-modulation spectrometry: CH3ONO photolysis and detection of nitroxyl

The method of molecular-modulation spectrometry for studying photochemical reactions has been applied to methyl nitrite photolysis. The infrared absorption of the nitroxyl radical HNO has been observed in the gas phase at 3300 cm^?1. Under the present experimental conditions the steady-state concentration of HNO under steady illumination was 1.1 × 10¹² particles/cc, and the observed modulation amplitude was 4.5 × 10¹⁰ particles/cc. At 25°C and 1 atm of nitrogen, the cross section for infrared absorption by HNO at 3300 cm^?1 is 1.7 × 10^?19 cm². The rate constant ratio b/c was found to be 8.0. From the literature value of the rate constant d , the observed rate constant for the reaction is e = (5 ± 1) × 10^?11 cc/particle sec.     

1-methyl-(D3)-trishomocubane

The acid catalysed rearrangement of 8-methyl-pentacyclo(5.4.0.0^2,6.0^3,10.0^5,9)undecan-8-endo-o1 ($\text{8}$) to 3-methyl-(D₃)-trishomocuban-4-o1 ($\text{9}$) provided the key step to the synthesis of the title compound ($\text{11}$).     

The baeyer-villiger reaction of strained cage compounds, 1,3-bishomocubanones,via carbocations

The Baeyer-Villiger oxidation of 1,3-bishomocubanone 1a in chloroform with m-chloroperbenzoic acid (m-CPBA) at room temperature proceeds quite rapidly and gives the ordinary lactone, 10-oxapentacy-clo[5.4.0.0^2.5.0^3.9.0^4.8]undecan-11-one 2a and the skeletal rearrangement product, 11-oxapentacy-clo[6.3.0.0^2.4.0^3.7.0^5.9]undecan-10-one 4a. Methyl substituted homologs (1d, 1e, 1f) of 1a give the corresponding ordinary and rearranged lactones (2d, 2e, 2f, 4d, 4e, 4f). In these oxidations, the mechanism via carbocations, cyclobutyl 18 and cyclopropylcarbinyl cations 19, plays a major role different from the ordinary concerted migration mechanism. Solvent effects, kinetic treatments, and methyl substituent effects on product ratios support this carbocation mechanism. The adduct formation process between a ketone and m-CPBA must be rate-determining.     

Nickel(II) complexes of 3-acetyl-4,5-dihydro-1,2,4-triazole hydrazones

3-Acetyl-1,2,4-triazole hydrazones (3b,c) and methylhydrazone (4d) were prepared by reacting triazoles (1b–d) with an excess of hydrazines at room temperature. Square planar nickel(II) complexes (8b,c) of (3b,c) were obtained from their reaction with Ni(OAc)₂ in a 2:1 mol ratio in EtOH at room temperature. The spectral data suggest structures (8b,c) for the obtained complexes, which result from ring opening of the triazole ring followed by recyclization to give the 5-arylhydrazono-2,3-dihydro-4H-1,2,4-triazine ligand (7b,c). The reaction of triazole methylhydrazone (4d) with Ni(OAc)₂ in EtOH resulted, however, in the formation of the starting triazole (1d). All new compounds were characterized by elemental analysis, i.r., ¹H-n.m.r. ¹³C-n.m.r. and hrms.     

Synthesis and crystal structure of pyridine and methanol coordinated α-octabutyloxyphthalocyaninatocobalt (II)

Crystal structure of pyridine and methanol axially coordinated 1,4,8,11,15,18,22,25-octabutyloxyphthalocyaninatocobalt(II)(viz. α-octabutyloxyphthalocyaninatocobalt) [(n-BuO)₈Pc]. Co(Py)(MeOH) (1) was determined by X-ray diffraction methods. Crystal data: monoclinic, space group P2₁/n, Z = 4, a = 1.06482(4), b = 3.5487(2), c = 1.79428(9) nm, β=103.246(2)°, V = 6.5792(5) nm³, μ = 0.325 mm^-1. The result shows that the ring skeleton of 1 maintains planar conformation, which is similar to that of unsubstituted phthalocyanine but is remarkably different from the saddle shape conformation of 1,4,8,11,15,18,22,25-octabutyloxyphthalocyaninatocopper (II) [(n-BuO)₈Pc]Cu(2), which has no axial coordination. In the structure of 1, the substituents butyloxy groups of 1 somewhat deviate from the ring plane, while pyridine and methanol are coordinated to the center atom Co from opposite sides of the ring plane. In addition, all molecules are stacked along axis a to form one-dimensional molecule chain, the neighboring molecules in the chain overlap to some extent with a benzene ring and a distance of 0.3565 nm.     

Rotating sector study of the gas phase photolysis of the 1,1,1-trichloro-2,2,2-trifluoroethane–cyclohexane system

The rate constant for the combination of 1,1-dichloro-2,2,2-trifluoroethyl radicals in the gas phase has been measured by applying the rotating sector technique to the 1,1,1-trichloro-2,2,2-trifluoroethane–cyclohexane photochemical system. The combination rate constant, k₅, was found to be 6.6 × 10¹² cc mole^?1 sec^?1. Arrhenius parameters for the reaction, are given by the expression log k₄ = 11.81 – (9700/2.3RT).     

Chemical Transformations of (2,3,9,10-Tetramethyl-1,4,5,7,8,11,12,14-Octa-Azacyclotetradeca-1,3,8,10-Tetraenato)Cobalt(II)Perchlorate

The monomeric octa-aza bis-α-diimine macrocyclic complex [Co^II(C₁₀H₂₀N₈)(H²O)](ClO₄)₂ I, undergoes various reactions on the macrocyclic ligand. Reaction of complex I with triethylamine in double molar proportions, followed by slow aerial oxidation, produces a molecular dimeric complex [Co^II(C₁₀H₁₄N₈)]₂, III, and a novel Co(I) complex [Co^I(C₁₀H₁₉N₈)], IV. Complex III is a staggered cofacial dimer with a cobalt-cobalt bond length 2.86(1) Å. The macrocyclic ligand of the complex contains an a-diimine function in each five-membered chelate ring, and a three-atom N-C-N^? delocalized system in each six-membered chelate ring. Complex IV has the 5-5-6-6 chelate arrangement because one α-diimine moiety is rearranged to a syn-anti configuration. In the structure, the two fused six-membered chelate rings are fully conjugated and the two fused five-membered rings are saturated. However, when complex I reacts with excess triethylamine under the similar conditions, a dimeric complex of another type, [Co^II(C₁₀H_l6N₈)]₂, II, was generated, in which one N-N bond of the macrocyclic ligand is broken. Complex IV can be isolated also from the reaction of complex I with excess hydrazine, followed by slow aerial oxidation. When hydrazine in double molar proportions was used, complex [Co^I(C₁₀H₁₇N₈)(NHNH)] V, which contains a coordinated diazene ligand, was obtained. Only one six-membered chelate ring of complex V is deprotonated and oxidized to form a three-atom N-C-N^? delocalized system. The structures of octa-aza complexes I-V are determined by X-ray crystallography: I, orthorhombic, C mca, a = 11.646(4), b = 17.049(3), c = 10.706(3) Å, Z = 4, R = 0.045, R_w = 0.047, based on 1024 reflections with I > 2σ(I); II, monoclinic, P 2₁/c, a = 9.814(3), b = 22.583(6). c = 14.632(9) Å, β = 98.90(5)°, Z = 4, R = 0.085, R_w = 0.101, based on 2033 reflections with I > 2σ(I); III, tetragonal, P 4/nmm, a = 15.614(3), c = 6.498(2) Å, Z = 4, R = 0.081, R_w = 0.115, based on 340 reflections with I > 2σ(I); IV, orthorhombic, P bca, a = 8.484(1), b = 16.662(3), c = 18.760(2) Å, Z = 8, R = 0.029, R_w = 0.024, based on 1441 reflections with I > 2σ(I); V, monoclinic, P 2₁/m, a = 7.892(3), b = 11.713(6), c = 9.326(4) Å, β = 108.03(3), Z = 2, R = 0.047, R_w = 0.056, based on 948 reflections with I > 2σ(I).     

The crystal structure of a K+ complex of valinomycin.

A KI₃/KI₅ complex of the cyclododecadepsipeptide antibiotic valinomycin crystallizes in the space group C222₁, a = 13.34, b = 24.65, c = 46.96 Å. The crystal structure investigation shows that K⁺ is coordinated octahedrally by six carbonyl oxygen atoms. The macrocyclic ring skeleton adopts non-crystallographic S₆ symmetry. Six hydrogen bonds involving amide nitrogen atoms and carbonyl oxygen atoms form a belt around the molecule.     

Ambient Temperature Ligation of Diene Functional Polymer and Peptide Strands onto Cellulose via Photochemical and Thermal Protocols

In the present contribution, two novel ambient temperature avenues are introduced to functionalize solid cellulose substrates in a modular fashion with synthetic polymer strands (poly(trifluoro ethyl methacrylate), PTFEMA, M_n = 4400 g mol⁻¹, Đ = 1.18) and an Arg‐Gly‐Asp (RGD) containing peptide sequence. Both protocols rely on a hetero Diels–Alder reaction between an activated thiocarbonyl functionality and a diene species. In the first—thermally activated—protocol, the cellulose features surface‐expressed thiocarbonylthio compounds, which readily react with diene terminal macromolecules at ambient temperature. In the second protocol, the reactive ene species are photochemically generated based on a phenacyl sulfide‐decorated cellulose surface, which upon irradiation expresses highly reactive thioaldehyde species. The generated functional hybrid surfaces are characterized in‐depth via ToF‐SIMS and XPS analysis, revealing the successful covalent attachment of the grafted materials, including the spatially resolved patterning of both synthetic polymers and peptide strands using the photochemical protocol. The study thus provides a versatile platform technology for solid cellulose substrate modification via efficient thermal and photochemical ligation strategies.

     

A Novel Poly(aryleneethynylene) with Tetrathiafulvalene (TTF) Side Chains: Synthesis,Self‐Assembly,and Electroactive Property

A novel poly(aryleneethynylene), in which the main chain and the tetrathiafulvalene (TTF) side chains are coplanar, has been prepared and characterized. The polymer can self‐assemble in tetrahydrofuran (THF) and the π‐extended coplanar backbones adopt good face‐to‐face stacking, which is confirmed by X‐ray diffraction (XRD) analysis. Cyclic voltammetry has revealed that the polymer has reversible electroactive properties. The optical bandgap deduced by UV‐vis absorption spectroscopy and the electrochemical bandgap are 2.03 and 2.14 eV. The conductivities of the powder and the realigning solid of the polymer are 6 × 10⁻⁸ and 4 × 10⁻⁶ S cm⁻¹.

     

Investigation of the reactions of fluorine containing 3-hydrazino-5H-1, 2, 4-triazino[5, 6-b]indoles with ethyl acetoacetate. Synthesis of some novel tetracyclic ring systems

Novel tetracyclic ring systems viz. 3-methyl-1-oxo-12H-1, 2, 4-triazepino[3′,4′:3, 4][1, 2, 4]triazino[5, 6-b]indole ( 4a ) and 3-methyl-5-oxo-12H-1, 2, 4-triazepino[4′,3′:2, 3][1, 2, 4]triazino[5, 6-b]indole ( 5a ), having angular and linear structures respectively, were synthesized by the cyclization of 3-oxobutanoic acid [5H-1, 2, 4-triazino-[5, 6-b]indole-3-yl]hydrazone ( 3a ). However, cyclization of 3b (R = CH_a, R¹ = R² = H) afforded the angular product 4b exclusively. Moreover, cyclization of 3c (R = R³ = H, R¹ = F) yielded 7-fluoro-1-0xo-10H-1, 3-imidazo[2′,3′:3, 4][1, 2, 4]triazino[5, 6-b]indole ( 6c ) and 7-fluoro-3-oxo-10H-1, 3-imidazo[3′,2′:2, 3][1, 2, 4]triazino-[5, 6-b]indole ( 7c ) instead of the expected triazepinone derivatives. Compound 3d (R = R¹ = H, R² = CF₃) also gave an imidazole derivative but only one angular product was obtained. In all these reactions, formation of the angular product involving cyclization at N-4 is favoured. Characterization of these products have been done by elemental analyses, ir, pmr, ¹⁹F nmr and mass spectral studies.     

Beiträge zur Chemie des Phosphors. 219 [1]. Tetraisopropyl-octadecaphosphan(4), P18i-Pr4 – Darstellung und kernresonanzspektroskopische Strukturbestimmung

Contributions to the Chemistry of Phosphorus. 219. Tetraisopropyloctadecaphosphane(4), P₁₈i-Pr₄ — Preparation and Structure Determination by Nuclear Magnetic Resonance Tetraisopropyloctadecaphosphane(4) ( 1 ) has been obtained by reaction of i-PrPCl₂ with P₄ and magnesium and subsequent thermolysis of the crude reaction product, and has been isolated in 95% purity. According to NMR-spectroscopic investigations, 1 contains a conjuncto-phosphane skeleton consisting of a P₁₁(5)- and a P₉(3)-structural element analogous to that of deltacyclane, joined through a common P₂-bridge. Thus, 1 is 8,14,16, 18-tetraisopropyloctacyclo[13.2.1.0^2,13.0^3,11.0^4,9.0^5,7.0^6,10.0^12,17]octadecaphosphane. Compound 1 is formed as a mixture of two configurational isomers 1 a and 1 b , which differ from each other in their spatial arrangements of the isopropyl group at P₈.     

Photophysical Properties and Photochemical Behaviour of Ruthenium(II) complexes containing the 2,2′-bipyridine and 4,4′-diphenyl-2,2′-bipyridine ligands

The temperature dependence of the emission lifetime of the series of complexes Ru(bpy)_n(4,4′-dpb) (bpy = 2,2′bipyridine, 4,4′-dpb = 4,4′-diphenyl-2,2′-bipyridine) has been studied in propionitrile/butyronitrile (4:5 v/v) solutions in the range 90–293 K. The obtained photophysical parameters show that the energy separation between the metal-to-ligand charge tranfer (³MLCT) emitting level and the photoreactive metal-centered (³MC) level changes across the series (ΔE = 3960, 4100, 4300, and 4700 cm^?1 for Ru(bpy)), Ru(bpy)2(4,4′-dpb)²⁺, Ru(bpy)(4,4′-dpb), and Ru(4,4′-dpb), respectively, where ΔE is the energy separation between the minimum of the ³MLCT potential curve and ³MLCT – ³MC crossing point. Comparison between spectral and electrochemical data indicated that the changes in ΔE are due to stabilization of the MLCT levels in complexes containing 4,4′-dpb with respect to Ru(bpy)²⁺₃. The photochemical data for the same complexes (as I^? salts) have been obtained in CH₂Cl₂ in the presence of 0.01M Cl^? upon irradiation at 462 nm. The complexes containing 4,4′-dpb are more photostable than Ru(bpy). Comparison between the data for thermal population of the ³MC photoreactive state and those for photochemistry indicated that the overall photochemical process is governed by (i) a thermal redistribution between the emitting and photoreactive excited states, and (ii) mechanistic factors, likely related to the size of the detaching ligand.     

BF3·Et2O-catalyzed rearrangement of 7-epimeric 3β,7-diacetoxy-9β,11β-epoxy-5α-lanostanes. Formation of novel 19(10→9β)abeo- and 19(10→9β), 30(14→8α)bis-abeo-lanostane derivatives

The boron trifluoride etherate catalyzed reaction of 7-epimeric 3β,7-diacetoxy-9β,11β-epoxy-5α-lanostanes 1 and 2 in acetic anhydride resulted in the formation of a series of skeletally rearranged products, mainly 19(10→9β)abeo-lanostanes. 19(10→9β),30(14→8α)Bis-abeo-lanostane derivative 5 possessing a novel type of the triterpene skeleton was formed as the major product in the reaction of 7α-epimer 2. The direction and extent of rearrangements of 9β,11β-epoxides 1 and 2 depends on the configuration of the 7-acetoxy group. The structures of the new compounds were determined on the basis of spectroscopic methods, mainly ¹H and ¹³C NMR. The structure of compound 5 was confirmed by single-crystal X-ray diffraction.     

Conformations of the 10-membered Ring in 5, 10-Secosteroids. II. (E)-3α-Acetoxy-5, 10-seco-1 (10)-cholesten-5-one and (E)-5, 10-seco-1 (10)-cholestene-3, 5-dione

(E)-3α-Acetoxy-5, 10-seco-1(10)-cholesten-5-one ( 3 ) was synthesized by fragmentation of 3α-acetoxy-5α-cholestan-5-ol ( 1 ) using the photochemical version [3] of the lead tetraacetate reaction [4], and transformed into the corresponding 3-oxo-compound ( 5 ). Two conformations ( A and B ) were deduced for the 10-membered ring of 3 by analysis of the ¹H- and ¹³C-NMR. spectra in toluene. The major conformation ( A ) corresponds to that found in the solid state by X-ray analysis. According to its NMR. spectra in toluene, the medium-sized ring of the diketone 5 exists also predominantly in two conformations, the major one being analogous to A (the solid-state conformation of the 3β-acetoxy isomer ( 9 ) [1]) and the minor one to A (see above). The stereochemistry of the acidcatalyzed and thermal cyclisations of 3 as well as of the corresponding 5-oxime is discussed in terms of conformational factors.     

Yonarolide A,an unprecedented furanobutenolide-containing norcembranoid derivative formed by photoinduced intramolecular [2+2] cycloaddition

Eight polycyclic furanobutenolide-containing norcembrane diterpenoids featuring C19 frameworks (1–8) were rapidly recognized and isolated from the Hainan soft coral Sinularia sp. by the HSQC-based small molecule accurate recognition technology. Yonarolide A (1a), featuring an unprecedented 5/6/4/4/7 pentacyclic ring skeleton, was surprisingly obtained as a transformed product by leaving compound 1 under indoor natural light, and was further proved to be a [2 + 2] cycloaddition product of 1 by photochemical reaction. The absolute stereochemistry of 1a and the three known norcembrane diterpenoids 1, 4, and 7 were determined by using X-ray diffraction (XRD) analyses. Further, with the aid of XRD analysis, the structure of scabrolide B (2), which was previously reported of possessing 5/6/7 tricyclic skeleton, was firmly revised as 2a with the rare inelegane skeleton featured by the highly oxygenated 5/7/6 tricyclic carbocycle.     

Versuche zur Synthese von Calicen aus trisubstituierten Cyclopropanen und Cyclopentenon

Attempted Synthesis of Calicene from Trisubstitued Cyclopropanes and Cyclopentenone The Li carbenoids 4 , prepared by treatment of substituted 1,1-dihalocyclopropanes with BuLi, are reacted with cyclopent-2-enone under thermodynamic and kinetic control (Scheme 1). In general, the latter procedure gives better yields of cyclopropylcyclopentenols 5a – e , but the reaction seems to be controlled mainly by the steric and electronic properties of the substituent Y. So, with 4b and 4e , the main reaction is the attack of the carbenoid at C(1) of cyclopent-2-enone, while 4a (Y = PhS) predominantly deprotonates the ketone (Scheme 4). Whereas 5d and 5e can easily be converted to the dihydrocalicenes 6d and 6e (Scheme 6), the attempted elimination of H₂O from 5a – c leads to the rearranged products 13 – 2 due to the opening of the cyclopropane ring (Scheme 5). Finally, the generation of the parent compound 2 from the silylated precursor 6d is attempted: treatment with MeO^? gives the addition products 18A/18B , while the reaction with Br₂ provides 19 by a bromination/dehydrobromination sequence (Scheme 7).     

Beiträge zur Chemie des Phosphors. 217 [1]. Hexaisopropyl-octadecaphosphan(6), P18i-Pr6—Darstellung und kernresonanzspektroskopische Strukturbestimmung

Contributions to the Chemistry of Phosphorus. 217. Hexaisopropyloctadecaphosphane(6), P₁₈i-Pr₆ – Preparation and Structure Determination by Nuclear Magnetic Resonance Hexaisopropyl-octadecaphosphane(6) ( 1 ) has been obtained by reaction of i-PrPCl₂ with P₄ and magnesium and subsequent thermolysis of the crude reaction product, and has been purely isolated as a yellow solid. According to NMR-spectroscopic investigations, 1 contains a new conjuncto-phosphate skeleton consisting of a P₁₁(5)- and a P₉(5)-structural element analogous to that of brexane, joined through a common P₂-bridge. Thus, 1 is 5,7,8,14,16,18-hexaisopropyl-heptacyclo[13.2.1.0^2,13.0^3,11.0^4,9.0^6,10.0^12,17]octadecaphosphane. Compound 1 is formed as a mixture of two configurational isomers 1a and 1b , which probably differ from each other by inversion of the configuration at the (PR)₂-bridge of the P₉(5) partial structure analogous to that of brexane.     

Kinetics and mechanisms of the reactions of OH with some oxygenated compounds of importance in tropospheric chemistry

The kinetics of the reactions have been studied in a discharge flow system under pseudo-first-order conditions. The OH concentration was monitored by laser induced fluorescence and helium was used as the carrier gas. Values of k₁ = (8.1 ± 1.7) × 10^?13, k₂ = (1.31 ± 0.26) × 10^?11, k₃ = (2.6 ± 0.5) × 10^?11, and k₄ = (2.5 ± 0.4) × 10^?11 cm³ molecule^?1 s^?1, at 298 K and 1 torr total pressure, were obtained. To validate the newly constructed system the rate constant for the reaction was determined in a similar manner. The value of k₅ = (6.7 ± 0.9) × 10^?12 cm³ molecule^?1 s^?1 at 298 K and 1 torr total pressure is in very good agreement with other literature values. The mechanisms for the atmospheric degradation of these compounds have been constructed to allow their incorporation in a photochemical trajectory computer model, to assess their impact on photochemical ozone creation in the troposphere. © 1994 John Wiley & Sons, Inc.     

PHOTOCHEMISTRY OF POLYFUNCTIONAL MOLECULES. DEVELOPMENT OF ANTENNA CHROMOPHORES FOR SELF-SENSITIZED PHOTOREDUCTION OF KETONES*

–Model systems are reported which test the efficacy of potential aryl antenna groups designed to harvest photons and subsequently transfer electronic energy to a target ketone through singlet-singlet energy transfer. The model series consists of 4-aryl substituted cyclohexanones where the aryl groups are benzyloxy ( 5a ), benzoyl ( 5b ), and dimethylphenylsiloxy ( 5c ). In each case, photolysis of isopropyl alcohol solutions of the substrate with 254 nm light results in photoreduction of the ketone to the corresponding alcohols, 6a-6c . The most efficacious sensitizing antennae are the benzyloxy and dimethylphenylsiloxy chromophores, with quantum efficiencies for reduction equal to 0.57 and 0.48, respectively. Photophysical and photochemical studies on 5a confirm that energy transfer to the ketone is intramolecular with the rate constant for energy transfer estimated at 2.4 × 10⁰ s^-1.