[B(O–C6H4–CN)4]– based Silver and Copper Coordination Polymers

A series of new coordination polymers bearing the [B(O–C₆H₄–CN)₄]^– anion was synthesized. Two new, one dimensional coordination frameworks of the type M[B(O–C₆H₄–CN)₄] (M = Ag, Cu) were obtained by salt metathesis. The reactivity towards organic Lewis‐bases was studied. The reaction with bidentate ligands yielded two dimensional networks with the general formula [M(L)][B(O–C₆H₄–CN)₄] {L = 2,2′‐bipyridine, 4,4′‐bipyridine, 1,2‐bis(pyridyl)ethane, 1,4‐diazabicyclo[2.2.2]octane}. The synthesis, properties and single crystal structure are reported.     

The [Ag{Se2C2(CN)2}(Se6)]3−, [Sb{Se2C2(CN)2}2]3−, and [As(Se)3(CH2CN)]2− Anions: Facile Formation of the Maleonitrilediselenolate (mns) Ligand, [Se2C2(CN)2]2−

An unusual route to the maleonitrilediselenolate (mns) ligand has been discovered with the isolation of compounds that contain this ligand bound to silver (structure shown on the right) or antimony. The formation of the [As(Se)₃(CH₂CN)]²⁻ anion along with possible pathways to the mns ligands is discussed.     

Palladium(II) and Platinum(II) Complexes with Bisphosphanes, [S2C=C(CN)2]2– and [Se2C=C(CN)2]2– as Chelating Ligands

The palladium(II) and platin(II) 1, 1‐dicyanoethylene‐2, 2‐dithiolates [(L–L)M{S₂C=C(CN)₂}] (M = Pd: L–L = dppm, dppe, dcpe, dpmb; M = Pt: dppe, dcpe, dpmb) were prepared either from[(L–L)MCl₂] and K₂[S₂C=C(CN)₂] or from [(PPh₃)₂M{S₂C=C(CN)₂}] and the bisphosphane. Moreover, [(dppe)Pt{S₂C=C(CN)₂}]was obtained from [(1, 5‐C₈H₁₂)Pt{S₂C=C(CN)₂}] and dppeby ligand exchange. The 1, 1‐dicyanoethylene‐2, 2‐diselenolates[(dppe)M{Se₂C=C(CN)₂}] (M = Pd, Pt) were prepared from[(dppe)MCl₂] and K₂[Se₂C=C(CN)₂]. The oxidation potentials of the square‐planar palladium and platinum complexes were determined by cyclic voltammetry. The reaction of [(dcpe)Pd(S₂C=O)] with TCNE led to a ligand fragment exchange and gave the 1, 1‐dicyanoethylene‐2, 2‐dithiolate [(dcpe)Pd{S₂C=C(CN)₂}] in good yield.     

Piaselenol—Piaselenolium—Pentaiodid (C6H4N2Se · C6H5N2Se+I3− · I2), eine Struktur mit Polyiodid-schichten

Piaselenole—Piaselenolium—Pentaiodide (C₆H₄N₂Se · C₆H₅N₂Se⁺ I₃^? · I₂), a Structure with Polyiodide Layers The title compound crystallizes in the monoclinic space group P2₁/n with a = 9.320(3), b = 13.812(2), c = 17.159(3) Å, β = 96.11(2)°, V = 2196.3 ų, Z = 4. There occur no isolated I^5? anions but layer-shaped polyiodide aggregates built up by linear, asymmetric I₃^? anions and I₂ molecules. Almost linear triiodide chains are connected by I₂ molecules in a novel type of arrangement to form slightly puckered layers. The polyiodide layers contain several substructures known from other examples. The piaselenole and its conjugated acid, the piaselenolium cation, form a ribbon-like quasi-polymer in which the two components are alternating. They are connected in turns by a linear NH? N hydrogen bridge (N? N: 2.844 Å) and by a so called (SeN)₂-connectivity parallelogram, in which Se? N bonds and Se? N contacts are adjacent. Here we found a very short Se? N contact distance of 2.691 Å. The bond distances of piaselenole (Se? N: 1.787(3) Å, N? C: 1.318(5) Å, C? C: 1.453(8) Å) and also the angles are equal or similar to those occuring in other 1,2,5-selenadiazoles. The protonation of one N in the SeN₂ unit results in a loss of symmetry and significant changes in bonding distances and angles.     

Theoretical study in [C2H4–Tl]+ and [C2H2–Tl]+ complexes

We studied the attraction between [C₂H_n] and Tl(I) in the hypothetical [C₂H_n–Tl]⁺ complexes (n = 2,4) using ab initio methodology. We found that the changes around the equilibrium distance C–Tl and in the interaction energies are sensitive to the electron correlation potential. We evaluated these effects using several levels of theory, including Hartree–Fock (HF), second‐order Møller–Plesset (MP2), MP4, coupled cluster singles and doubles CCSD(T), and local density approximation augmented by nonlocal corrections for exchange and correlation due to Becke and Perdew (LDA/BP). The obtained interaction energies differences at the equilibrium distance R_e (C–Tl) range from 33 and 46 kJ/mol at the different levels used. These results indicate that the interaction between olefinic systems and Tl(I) are a real minimum on the potential energy surfaces (PES). We can predict that these new complexes are viable for synthesizing. At long distances, the behavior of the [C₂H_n]–Tl⁺ interaction may be related mainly to charge‐induced dipole and dispersion terms, both involving the individual properties of the olefinic π‐system and thallium ion. However, the charge‐induced dipole term (R^?4) is found as the principal contribution in the stability at long and short distances. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

Synthesis and Structure of the Bicyclic [Sn4Se11]6– Anion in Na6Sn4Se11 · 22 H2O

Na₆Sn₄Se₁₁ · 22 H₂O can be crystallised at –8 °C as yellow‐orange needles from the 1 : 2 H₂O/CH₃OH mother liquor of a superheated reaction mixture of NaOH(s), Sn and Se. The bicyclic [Sn₄Se₁₁]^6– anion exhibits crystallographic C₂ symmetry and is composed of corner‐bridged SnSe₄ tetrahedra. Two opposite tin atoms of an Sn₄Se₄ 8‐membered ring are linked by a common Se atom, thereby affording two 6‐membered boat‐shaped Sn₃Se₃ rings with a shared Sn–Se–Sn bridging unit. [Sn₄Se₁₁]^6– thus represents the immediate precursor of the well‐known adamantane‐like [Sn₄Se₁₀]^4– anion.     

Rate constants for the elementary reactions between CN radicals and CH4, C2H6, C2H4, C3H6, and C2H2 in the range: 295 ⩽ T/K ⩽ 700

Pulsed laser photolysis, time-resolved laser-induced fluorescence experiments have been carried out on the reactions of CN radicals with CH₄, C₂H₆, C₂H₄, C₃H₆, and C₂H₂. They have yielded rate constants for these five reactions at temperatures between 295 and 700 K. The data for the reactions with methane and ethane have been combined with other recent results and fitted to modified Arrhenius expressions, k(T) = A′(298) (T/298)ⁿ exp(?θ/T), yielding: for CH₄, A′(298) = 7.0 × 10^?13 cm³ molecule^?1 s^?1, n = 2.3, and θ = ?16 K; and for C₂H₆, A′(298) = 5.6 × 10^?12 cm³ molecule^?1 s^?1, n = 1.8, and θ = ?500 K. The rate constants for the reactions with C₂H₄, C₃H₆, and C₂H₂ all decrease monotonically with temperature and have been fitted to expressions of the form, k(T) = k(298) (T/298)ⁿ with k(298) = 2.5 × 10^?10 cm³ molecule^?1 s^?1, n = ?0.24 for CN + C₂H₄; k(298) = 3.4 × 10^?10 cm³ molecule^?1 s^?1, n = ?0.19 for CN + C₃H₆; and k(298) = 2.9 × 10^?10 cm³ molecule^?1 s^?1, n = ?0.53 for CN + C₂H₂. These reactions almost certainly proceed via addition-elimination yielding an unsaturated cyanide and an H-atom. Our kinetic results for reactions of CN are compared with those for reactions of the same hydrocarbons with other simple free radical species. © John Wiley & Sons, Inc.     

Beryllepin,C6H6Be,and “Beryllium‐Inserted Benzenes,” C6H6Ben,n = 2–6: A Density Functional Computational Investigation

The seven‐membered beryllium‐containing heterocycle beryllepin, C₆H₆Be, has been examined computationally at the B3LYP/6‐311++G** density functional level of theory. Beryllepin is best described as a planar singlet heterocyclic conjugated triene with marginal aromatic character containing a C–Be–C moiety forced to be nonlinear (∠C‐Be‐C = 146.25°) by the cyclic constraints of the seven‐membered ring. The molecule can be considered to be derived from a benzene‐like system in which a neutral beryllium atom has been inserted between two adjacent carbon atoms. The 11 other possible “beryllium‐inserted benzenes,” C₆H₆Be_n, n = 2–6, have also been investigated. Only two of these heterocyclic systems, the eight‐membered 1,4‐diberyllocin and the nine‐membered 1,4,7‐triberyllonin, were found to be stable, singlet‐ground‐state systems, albeit with little aromatic character. Of the remaining nine beryllium‐inserted benzenes, with the exception of the 11‐membered ring containing five beryllium atoms and the 12‐membered ring containing six beryllium atoms, which were calculated to exist as a ground state pentet and septet, respectively, all were calculated to be ground state triplet systems.     

Cyclische Polyselenidoarsenate(III) und -antimonate(III): PPh4[Se5AsSe], PPh4[AsSe6–xSx], (PPh4)2[As2Se6] · 2 CH3CN und (PPh4)2[Se6SbSe]2

Cyclic Polyselenidoarsenates(III) and Polyselenidoantimonates(III): PPh₄[Se₅AsSe], PPh₄[AsSe_6–xS _x ], (PPh₄)₂[As₂Se₆] · 2 CH₃CN, and (PPh₄)₂[Se₆SbSe]₂ In acetonitrile, AsCl₃ and sodiumphenolate formed Cl₂AsOPh which then was reacted with PPh₄Se₅ and finally with Na₂Se to yield PPh₄[Se₅AsSe]. With Na₂S instead of Na₂Se, PPh₄[AsSe_6–xS_x] was obtained; the sulfur contents increased with increasing reaction temperature and time (x = 0.21 to 1.09). With PPh₄Se₂ instead of PPh₄Se₅, (PPh₄)₂[1,4-As₂Se₆] · 2 CH₃CN and PPh₄[Se₅AsSe] were the products. With SbCl₃ instead of AsCl₃, (PPh₄)₂[Se₆SbSe]₂ formed. PPh₄[Se₅AsSe] can also be produced from As₂Se₃, PPh₄Br, Na₂Se and selenium in acetonitrile. The crystal structure of PPh₄[SeAsSe₅] is isotypic with PPh₄[S₅AsS] (X-ray structure analysis with 2414 observed reflexions, R = 0.038). The Se₅AsSe^– ion consists of a six-membered AsSe₅ ring in chair conformation, and the As atom has an additional terminal Se atom. The compounds PPh₄[AsSe_6–xS_x] have the same crystal structures, with sulfur atoms taking all selenium positions at random, but with a preference for the terminal position. The anion in (PPh₄)₂[As₂Se₆] · 2 CH₃CN also has a six-membered ring structure in chair conformation, with two arsenic atoms in positions 1 and 4. The centrosymmetric anion in (PPh₄)₂[Se₆SbSe]₂ consists of a central Sb₂Se₂ ring, and a Se₆ ligand is bonded in a chelating manner to each Sb atom (X-ray structure analysis with 2669 observed reflexions, R = 0.099). ⁷⁷Se-NMR spectra are reported.     

Ba2(CN2)(CN)2 und Sr2(CN2)(CN)2 – die ersten gemischten Cyanamid-cyanide

Ba₂(CN₂)(CN)₂ and Sr₂(CN₂)(CN)₂ – the First mixed Cyanamide Cyanides The mixed cyanamide-cyanides M₂(CN₂)(CN)₂ (M = Ba, Sr) were synthesized by the reaction of Ba₂N and SrCO₃, respectively, with HCN at 630°C. The crystal structure of Ba₂(CN₂)(CN)₂ was determined from single-crystal X-ray investigations at room temperature and ?100°C; the isostructural Sr₂(CN₂)(CN)₂ was refined using powder methods (P6₃/mmc; Ba₂(CN₂)(CN)₂: a = 1 066.52(5) pm, c=696.82(3) pm; Sr₂(CN₂)(CN)₂: a = 1 035.91(1) pm, c = 664.23(1) pm; Z = 4). The crystal structure is a partially filled defect variant of the anti-NiAs structure type with a distorted hexagonal close packed arrangement of M²⁺-ions. All CN₂^2? and one quarter of the CN^? ions occupy 3/4 of the octahedrally coordinated interstices, the remaining cyanide anions are located at 3/8 of the tetrahedral sites. In the crystal structure the CN^? are coordinated to the cations both end-on and side-on. All anions can be distinguished by vibrational spectroscopy.     

Pressure‐Induced Diels–Alder Reactions in C6H6‐C6F6 Cocrystal towards Graphane Structure

Pressure‐induced polymerization (PIP) of aromatics is a novel method for constructing sp³‐carbon frameworks, and nanothreads with diamond‐like structures were synthesized by compressing benzene and its derivatives. Here by compressing a benzene‐hexafluorobenzene cocrystal (CHCF), H‐F‐substituted graphane with a layered structure in the PIP product was identified. Based on the crystal structure determined from the in situ neutron diffraction and the intermediate products identified by gas chromatography‐mass spectrum, we found that at 20 GPa CHCF forms tilted columns with benzene and hexafluorobenzene stacked alternatively, and leads to a [4+2] polymer, which then transforms to short‐range ordered H‐F‐substituted graphane. The reaction process involves [4+2] Diels–Alder, retro‐Diels–Alder, and 1‐1′ coupling reactions, and the former is the key reaction in the PIP. These studies confirm the elemental reactions of PIP of CHCF for the first time, and provide insight into the PIP of aromatics.     

[(C2H5)3NH]2Sn3Se7 · 0,25 H2O und [(C3H7)2NH2]4Sn4Se10 · 4 H2O

Synthesis, Structure, and Properties of Some Selenidostannates. II. [(C₂H₅)₃NH]₂Sn₃Se₇ · 0,25 H₂O and [(C₃H₇)₂NH₂]₄Sn₄Se₁₀ · 4 H₂O The new selenidostannate hydrates [(C₂H₅)₃NH]₂Sn₃Se₇ · 0.25 H₂O ( I ) and [(C₃H₇)₂NH₂]₄Sn₄Se₁₀ · 4 H₂O ( II ) were synthesized from an aqueous suspension of triethylammonium (tripropylammonium), tin, selenium I and in addition sulfur II at 130 °C. I crystallizes at ambient temperature in the monoclinic space group P2₁/n (a = 2069,3(4) pm, b = 1396,6(3) pm, c = 2342,8(5) pm, β = 114,68(3)°, Z = 8) and is characterized by two different anions, chains from edge‐sharing [Se₃Se₇]^2– units and nets from trigonal SnSe₅ bipyramids. II crystallizes at ambient temperature in the tetragonal space group I4₁/amd (a = 2150,0(3) pm, c = 1174,4(2) pm, Z = 4) and contains adamantane like [Sn₄Se₁₀]^4–‐cages. The UV‐VIS spectra of the selenidostannates demonstrate that the absorption edges red shift as the dimensionality of the compounds is increased.     

Synthesis and characterization of novel chelated dimethylamino lithium alkoxides: molecular structures of [1‐LiOC(C6H11)2‐2‐NMe2C6H4]2 and [1‐LiOCPh2CH2‐2‐NMe2C6H4]2

From the reaction of 1‐HOCPh₂‐2‐NMe₂C₆H₄ ( 1 ), 1‐HOC(C₆H₁₁)₂‐2‐NMe₂C₆H₄ ( 2 ) and 1‐HOCPh₂CH₂‐2‐NMe₂C₆H₄ ( 3 ) with n‐BuLi in diethyl ether, the solvent‐free chelated dimethylamino lithium alkoxides [1‐LiOCPh₂‐2‐NMe₂C₆H₄]₂ ( 4 ), [1‐LiOC(C₆H₁₁)₂‐2‐NMe₂C₆H₄]₂ ( 5 ) and [1‐LiOCPh₂CH₂‐2‐NMe₂C₆H₄]₂ ( 6 ) were obtained. The lithium alkoxides 4 – 6 were characterized by ¹H, ⁷Li, and ¹³C NMR spectroscopy. Crystal structure determinations of 5 and 6 were carried out. Compounds 5 and 6 are examples of structurally characterized solvent‐free chelated dimethylamino lithium alkoxides and 6 is a rare example of this type containing a seven‐membered ring. Copyright © 2002 John Wiley & Sons, Ltd.     

Synthese,Struktur und Eigenschaften von [(C4H9)2NH2]4[Sn2Se6], [(C4H9)2NH2]4[Sn4Se10] · 2 H2O und [(C3H7)3NH]2[Sn3Se7]

About Selenidostannates. I Synthesis, Structure, and Properties of [Sn₂Se₆]^4–, [Sn₄Se₁₀]^4–, and [Sn₃Se₇]^2– The selenidostannates [(C₄H₉)₂NH₂]₄Sn₂Se₆ · H₂O ( I ), [(C₄H₉)₂NH₂]₄Sn₄Se₁₀ · 2 H₂O ( II ) und [(C₃H₇)₃NH]₂Sn₃Se₇ ( III ) were prepared by hydrothermal syntheses from the elements and the amines. I crystallizes in the monoclinic spacegroup P2₁/n (a = 1262.9(3) pm, b = 1851.3(4) pm, c = 2305.2(4) pm, β = 104.13(3)° and Z = 4). The [Sn₂Se₆]^4– anion consists of two edge‐sharing tetrahedra. II crystallizes in the orthorhombic spacegroup Pna2₁ (a = 2080.3(4) pm, b = 1308.2(3) pm, c = 2263.5(5) pm and Z = 4). The anion is formed from four SnSe₄ tetrahedra which are joined by common corners to the adamantane cage [Sn₄Se₁₀]^4–. III crystallizes in the orthorhombic spacegroup Pbcn (a = 1371.1(3) pm, b = 2285.4(5) pm, c = 2194.7(4) pm and Z = 8). The anion is a chain, built from edge‐sharing [Sn₃Se₅Se_4/2]^2– units, in which two corner sharing tetrahedra are connected to a trigonal bipyramid by an edge of one and a corner of the other tetrahedron. The results of the TG/DSC measurements and of temperature dependent X‐ray diffractograms reveal that I and II decompose at first by release of minor quantities of triethylammonium to compounds with layer structure and larger cell dimensions. At still higher temperature the rest of triethylammonium and H₂Se is evolved, leaving SnSe₂ and Se in the bulk. The former decomposes partially at the highest temperature to SnSe. In the measurements of III the complex intermediate compound was not observed. III decomposes directly to SnSe₂.     

Nickel Catalysis Enables Oxidative C(sp2)–H/C(sp2)–H Cross‐Coupling Reactions between Two Heteroarenes

Nickel can be used to promote oxidative C(sp²)?H/C(sp²)?H cross‐coupling between two heteroarenes. The reaction scope can be extended to aromatic carboxamides as the coupling partner. The reaction exhibits high functional‐group compatibility and broad substrate scope. The silver oxidant can be recycled to reduce costs and waste, which is very useful for practical applications.