Synthesis and properties of organosoluble polyimides based on novel perfluorinated monomer hexafluoro-2,4-toluenediamine

New highly fluorinated aromatic polyimides based on hexafluoro-2,4-toluenediamine and commercially available dianhydrides (6FDA and ODPA) were synthesized by one-pot high temperature polycondensation in benzoic acid melt. Owing to the CF₃ group and fluorine atoms in the meta-linked phenylenediamine fragment, these polyimides combine good solubility in organic solvents including such a low boiling point solvent as chloroform with high glass transition temperatures (330-345 °C), thermal and thermooxidative stability (T₅ is >500 °C). The highly fluorinated polyimide films (hydrogen content is ≤1%) exhibit good dielectric properties and low water absorption as well as excellent optical transparency in the UV-vis region (cut-off wavelength is 311 nm for 6FDA-based and 357 nm for ODPA-based polyimides), which is very important for optoelectronic materials.     

Synthesis and characterization of a new fluorinated macroinitiator and its diblock copolymer by AGET ATRP

A new fluorinated macroinitiator of poly 2,2,3,4,4,4-hexafluorobutyl methacrylate-Br (PHFMA-Br) was prepared via activator generated by electron transfer atom transfer radical polymerization (AGET ATRP), and then a series of fluorinated block copolymers with different fluorine content were successfully synthesized from the macroinitiator by the second step AGET ATRP. GPC, FTIR and ¹H NMR data obtained verified the synthesis. Contact angle measurement indicated that proper fluorine content could decrease the surface energy and increase the contact angle of the copolymer films. XPS characterization showed that the large difference in surface energy between the block and random copolymer film resulted from the difference of the fluorine content on the surface, although the fluorine content of the two copolymers in bulk was similar. The self-assembly behavior of the fluorinated block copolymer in selective solvents was evaluated by the TEM study, and the stable micelles with a core-shell structure were observed when the copolymer content was about 1 wt%.     

Synthesis of New Fluoropolymers: Tailoring Macromolecular Properties with Fluorinated Substituents

The challenges and opportunities in the preparation of new fluoro- polymers are illustrated by the synthesis of fluorinated poly(ether sulfones), polyimides, and polyethers. Synthetic methods used for the preparation of new fluorinated monomers and polymers include anion-radical substitutions of perfluoroalkyl diiodides, nucleophilic additions to fluorinated olefins, perfluoroalkylsulfonyl-mediated nucleophilic sub-stitutions, and direct fluorinations with elemental fluorine. Properly placed fluorinated substituents can have significant effects on the dielectric properties, thermal stability, moisture absorption, permeability, phase transitions, and reactivity of the resulting polymers. In addition, fluorinated groups can enhance nonlinear optical effects and provide a method for chromophore alignment. The special behavior of partially fluorinated substituent groups offers unique tools for tailoring macro-molecular properties.     

Polymer design for thermally stable polyimides with low dielectric constant

We successfully prepared a series of thermally stable polyimides (PIs) with low dielectric constant (k) by introducing bulky diphenyl fluorenylidene moieties in backbone. The lowest k was found to be 2.77 among non-fluorinated PIs and 2.35 among fluorinated ones. In order to prove the lowest limit of k in PIs, we prepared soluble and thermally stable polyarylenes (PArs) without polar imide linkage with the same aromatic moieties by coupling polymerization. The lowest k was 2.7 without fluorine (F) and 2.2 with F atom, which showed also promising for low k materials. From these results, PIs we prepared were estimated to the lowest k values among PIs. On the basis of statistics on these results, we could express contour lines of k as a function of imide concentration and F content with high correlation factor (r= 0.96) in PIs and PArs.     

The suspension�Cemulsion combined polymerization of fluorinated acrylic monomer and the fluorinated latex film surface properties

The perfluoroacrylate-containing copolymer composite particles were fabricated by suspension?Cemulsion combined polymerization (SECP). The features and formation mechanism of resulting polymer particles in SECP were studied. The fluorinated latexes with better stability and those fluorinated films with high surface fluorine content were prepared by SECP using fluorine-free surfactants as an emulsifying agent, and the surface natures of the fluorinated films were characterized. It was found that P(MMA?CBA) latex particles gradually coagulated with P(PFA?CBA) particles after adding emulsion polymerization constituents at the midstage of the suspension polymerization, and fluorinated composite particles with core?Cshell structure and larger size were obtained. The fluorine contents either on the film surface or in the bulk of the film and the films from SECP are higher than those from miniemulsion polymerization at high PFA feed ratio (more than 20?wt.%). The model of PFA?CMMA?CBA SECP was proposed according to the variations of particle features of the composite particles.     

Novel fluorinated polyimides derived from an unsymmetrical diamine containing trifluoromethyl and methyl pendant groups

Novel fluorinated polyimides were prepared from an unsymmetrical diamine, 3‐methyl‐4‐(4‐amino‐2‐trifluoromethylphenoxy)‐4'‐aminobenzophenone ( 3 ), with four aromatic dianhydrides via a one‐step high‐temperature polycondensation procedure. All the obtained polyimides were soluble in some polar solvents such as NMP, DMAc, and DMF. Flexible and tough films were prepared by casting from polymer solution. These polyimide films exhibited high optical transparency, good mechanical and thermal properties. Moreover, they possessed low dielectric constants and low‐moisture absorption. Due to their properties, these fluorinated polyimides could be considered as photoelectric and microelectronic materials. Copyright © 2010 John Wiley & Sons, Ltd.     

含氟聚酰亚胺及其在微电子工业中的研究进展I含氟单体及聚酰亚胺的合成

综述了近年来国内外在含氟聚酰亚胺(PI)研究及应用领域中的最新进展情况。主要从含氟二胺单体、二酐单体及含氟聚酰亚胺在合成方面的研究进展情况进行了详细的综述。重点阐述了中国科学院化学研究所305组近几年在这方面的研究进展情况，并指出为了推动含氟聚酰亚胺这类具有优良综合性能的功能材料在工业上的广泛应用，就必须首先解决含氟单体种类较少这个制约含氟聚酰亚胺发展的瓶颈问题。     

Preparation and surface properties of latexes with fluorine enriched in the shell by silicon monomer crosslinking

A series of core-shell acrylic copolymer latexes containing fluorine enriched in the shell have been prepared by emulsion polymerization of a variety of hydrocarbon monomers with (perfluoroalkyl)methyl methacrylate and vinyltriethoxysilicone. In the presence of a reactive anionic and a long chain anionic-nonionic emulsifier, the core-shell latexes were prepared and characterized by transmission electron microscopy (TEM) and tapping-mode atomic force microscopy (AFM). From AFM and contact angle measurements, it was observed that the resulting fluorine and silicon-containing acrylic copolymers with surface energy as low as 15.5 mN/m formed a dense and gradient film containing a surface layer with high a fluorine content, and that the fluorinated particles can be fixed on the surface due to the crosslinking reaction of multi-functional silicon monomer even though the fluorinated carbon number was not enough to crystallize.     

SURFACE STRUCTURE AND BULK PROPERTIES OF FLUORINATED POLY(ETHER URETHANE)S AND POLY(ETHER URETHANE) BLENDS

INTRODUCTIONPolyurethanes (PU) have been widely used for manufacturing medical devices because of their excellentmechanical properties and moderate biocompatibility[1]. Although polyurethanes used in applications requiringall of the above properties have been successful for short-term use, the problems of long-term thromboresistanceand biostability in a biological environment still remain unsolved[2,3]. A legitimate approach to improving theproperties of polyurethanes is introduction of f…     

含氟聚酰亚胺及其在微电子工业中的研究进展Ⅱ含氟聚酰亚胺在微电子工业中的应用

综述了近年来国内外在含氟聚酰亚胺(PI)研究及应用领域中的最新进展情况。主要从现代微电子工业对相关材料的性能要求、标准型聚酰亚胺材料所面临的挑战以及新型含氟聚酰亚胺在微电子工业中的应用等几个方面进行了详细的综述。重点阐述了中国科学院化学研究所305组近几年在这方面的研究进展情况。并指出为了推动我国微电子工业的发展，研制开发低成本、高技术含量的含氟聚酰亚胺材料具有十分重要的现实意义．     

Sul-containing fluorinated polyimides for optical waveguide device

Novel sul-containing fluorinated polyimides have been synthesized by the reaction of 2,2′-bis-(trifluoromethyl)-4,4′-diaminodiphenyl sulfide (TFDAS) with 1,4-bis-(3,4-dicarboxyphenoxy)benzene dianhydride (HQDPA), 2,2′-bis-(3,4-dicarboxyphenyl)hexafluoropropane dianhydride (6FDA), 4,4′-oxydiphthalicanhydride (ODPA) or 3,4,3′,4′-biphenyl-tetracarboxylic acid dianhydride (s-BPDA). The fluorinated polyimides, prepared by a one-step polycondensation procedure, have good solubility in many solvents, such as N-methyl-2-pyrrolidinone (NMP), dimethylacetamide (DMAc), dimethyl sulfoxide (DMSO), cyclohexanone, tetrahydrofuran (THF) and m-cresol. The molecular weights (M_n's) and polydispersities (M_n/M_w's) of polyimides were in the range of 1.24 × 10⁵ to 3.21 × 10⁵ and 1.59–2.20, respectively. The polymers exhibit excellent thermal stabilities, with glass-transition temperatures (T_g) at 221–275 °C and the 5% weight-loss temperature are above 531 °C. After crosslinking, these polymers show higher thermal stability. The films of polymers have high optical transparency. The novel sul-containing fluorinated polyimides also have low absorption at both 1310 and 1550 nm wavelength windows. Rib-type optical waveguide device was fabricated using the fluorinated polyimides and the near-field mode pattern of the waveguide was demonstrated.     

Synthesis and properties of aramids and polyarylates having perfluoro-substituents on the benzene ring

A new series of 16 aramids and 16 polyarylates having perfluoro-substituents on the benzene ring was prepared by a low temperature solution or an interfacial polycondensation. The effects of fluorine substituents on the structure and properties of polymers were examined. Fluorinated aramids exhibited higher crystallinity, while fluorinated polyarylates show lower crystallinity. The melting point (T_m) of aramids decreased with fluorine substitution, whereas T_m of polyarylates from fluorinated aromatic diols was higher than that of those from unfluorinated ones. The temperature of 10% weight loss and the residue at 900°C decreased with fluorine substitution except for the aramids from fluorinated diamines. Solubility and contact angle also increased with fluorine substitution. Some polyarylates were found to exhibit an optical anisotropy.     

Convenient synthesis of novel fluorinated polyurethane hybrid latexes and core-shell structures via emulsion polymerization process with self-emulsification of polyurethane

Novel fluorinated polyurethane hybrid latexes in the size range of 40–50 nm, fluoroalkyl acrylate as fluorinated monomers, with various fluorine content (F% = 9∼26 wt%) were successfully prepared via emulsion polymerization process without traditional emulsifier. The waterborne polyurethane, which was synthesized by using isophronediisocyanate, dimethylol propionic acid, polyethylene glycols, etc., served not only as copolymerizable macromonomer but also as polymeric high molecular weight emulsifier. The structures of polyurethane macromonomer and fluorinated polyurethane were characterized by Fourier transform infrared and H¹-NMR. Particle size, zeta potential, micromorphology of the latex par.ticles, and surface properties were investigated by dynamic light scattering, potential particle size analyzer, transmission electron microscopy, and contact angle measurement, respectively. Results illustrated that the advantage of this process is that the size of fluorinated polyurethane hybrid particle is less sensitive to the composition. Furthermore, it was showed that fluorinated polyurethane latex particles had core-shell structures, especially when the content of fluorine was 26.08 wt%. Moreover, there was an obvious migration of fluorinated groups to the surface during the formation of fluorinated polymer films, although fluorinated groups were covered by polyurethane in latex particles.     

Polyimides from 1,5-bis(4-amino-2-trifluoromethylphenoxy)naphthalene and aromatic tetracarboxylic dianhydrides

A new trifluoromethylated bis(ether amine), 1,5-bis(4-amino-2-trifluoromethylphenoxy)naphthalene, was synthesized in two steps starting from 1,5-dihydroxynaphthalene and 2-chloro-5-nitrobenzotrifluoride via nucleophilic aromatic substitution and catalytic reduction. A series of novel fluorinated polyimides with moderate to high molecular weights were synthesized from the diamine with various aromatic tetracarboxylic dianhydrides using a conventional two-stage process. All polyimides could afford flexible and tough films and most of them were soluble in strong polar solvents such as N-methyl-2-pyrrolidone (NMP) and N,N-dimethylacetamide (DMAc). The polyimides showed glass-transition temperatures (T_g) in the range of 253-315 °C (by DSC) and softening temperatures (T_s) in the range of 250-300 °C (by TMA). Decomposition temperatures for 5% weight loss all occurred above 500 °C in both air and nitrogen atmospheres. The dielectric constants of these polymers ranged from 3.17 to 3.64 at 1 MHz. The properties of these fluorinated polyimides were also compared with those of polyimides prepared from 1,5-bis(4-aminophenoxy)naphthalene with the same dianhydrides.     

Synthesis of gemini surfactants with twelve symmetric fluorine atoms and one singlet F MR signal as novel F MRI agents

A family of fluorinated gemini surfactants derived from perfluoropinacol has been synthesized as novel ¹⁹F magnetic resonance imaging (¹⁹F MRI) agents. These fluorinated surfactants with 12 symmetric fluorine atoms and one singlet ¹⁹F MR peak can be conveniently prepared from perfluoropinacol and oligo(ethylene glycols) on multi-gram scales. Solubility, hydrophilicity (log P), and critical micelle concentration (CMC) measurements of these fluorinated surfactants indicated that high aqueous solubility can be achieved by introducing oligo(ethylene glycols) with appropriate length into perfluoropinacol, i.e., manipulating the fluorine content (F%). One of these fluorinated surfactants with high aqueous solubility and excellent ¹⁹F MR properties has been identified by ¹⁹F MRI phantom experiments as a promising ¹⁹F MRI agent.     

Preparation,characterization, and properties of fluorinated polyurethanes

Novel fluorinated polyurethanes (FPUs) were prepared by living radical polymerization of polyurethanes and hexafluorobutyl acrylate. The structures of the FPUs were characterized by FTIR, ¹H NMR, GPC, DSC, and XPS. The fluorinated polyurethane polymerization was investigated and showed monomer conversion, and molecular weight increased with increasing reaction time. In this way, the fluorine content in polyurethane could be easily adjusted by controlling the content of the fluorinated acrylate monomer. The mechanical evaluation shows that FPUs exhibit good mechanical properties. Morphology of FPU films was observed by scanning electron spectroscopy. The effects of the fluorine content on the surface properties and oxidative stability of FPUs were investigated. FPUs films were devoid of significant surface degradation after immersion in 20% H₂O₂ and 0.1 M CoCl₂ at 37 °C for 5 weeks. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3248–3256, 2009     

Preparation and properties of molecular‐weight‐controlled polyimides derived from 1,4‐bis(4′‐amino‐2′‐trifluoromethylphenoxy)benzene and 4,4′‐oxydiphthalic anhydride

A series of molecular‐weight‐controlled fluorinated aromatic polyimides were synthesized through the polycondensation of a fluorinated aromatic diamine, 1,4‐bis(4′‐amino‐2′‐trifluoromethylphenoxy)benzene, with 4,4′‐oxydiphthalic anhydride in the presence of phthalic anhydride as the molecular‐weight‐controlling and end‐capping agent. Experimental results demonstrated that the resulting polyimides could melt at temperatures of 250–300 °C to give high flowing molten fluids, which were suitable for melt molding to give strong and flexible polyimide sheets. Moreover, the aromatic polyimides also showed good solubility both in polar aprotic solvents and in common solvents. Polyimide solutions with solid concentrations higher than 25 wt % could be prepared with relatively low viscosity and were stable in storage at the ambient temperature. High‐quality polyimide films could be prepared via the casting of the polyimide solutions onto glass plates, followed by baking at a relatively low temperature. The molten behaviors and organosolubility of the molecular‐weight‐controlled aromatic polyimides depended significantly on the polymer molecular weights. Both the melt‐molded polyimide sheets and the solution‐cast polymer films exhibited outstanding combined mechanical and thermal properties. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1997–2006, 2006     

Synthesis and characterization of novel fluorinated polyimides derived from 4-phenyl-2,6-bis[4-(4′-amino-2′-trifluoromethyl-phenoxy)phenyl]pyridine and dianhydrides

A series of organo-soluble polyimides were prepared from a novel fluorinated diamine monomer, 4-phenyl-2,6-bis[4-(4′-amino-2′-trifluoromethylphenoxy)phenyl]pyridine and various commercial aromatic dianhydrides. These polyimides had good solubility in common organic solvents. The obtained strong and flexible PI films exhibited excellent thermal stability with the decomposition temperature (at 5% weight loss) of above 561 °C and the glass transition temperature in the range of 258-312 °C. Moreover, the polymer films showed good electrical insulating property, low dielectric constant and low water uptake due to the introduction of fluorinated substitutes in the polymer backbone. The remarkable combined features ensure these polymers to be ideal candidate materials for advanced microelectronic industry and other related applications.     

Novel,organosoluble, light‐colored fluorinated polyimides based on 2,2′‐bis(4‐amino‐2‐trifluoromethylphenoxy)biphenyl or 2,2′‐bis(4‐amino‐2‐trifluoromethylphenoxy)‐1,1′‐binaphthyl

Two series of fluorinated polyimides were prepared from 2,2′‐bis(4‐amino‐2‐trifluoromethylphenoxy)biphenyl ( 2 ) and 2,2′‐bis(4‐amino‐2‐trifluoromethylphenoxy)‐1,1′‐binaphthyl ( 4 ) with various aromatic dianhydrides via a conventional, two‐step procedure that included a ring‐opening polyaddition to give poly(amic acid)s, followed by chemical or thermal cyclodehydration. The inherent viscosities of the polyimides ranged from 0.54 to 0.73 and 0.19 to 0.36 dL/g, respectively. All the fluorinated polyimides were soluble in many polar organic solvents, such as N,N‐dimethylacetamide and N‐methylpyrrolidone, and afforded transparent and light‐colored films via solution‐casting. These polyimides showed glass‐transition temperatures in the ranges of 222–280 and 257–351 °C by DSC, softening temperatures in the range of 264–301 °C by thermomechanical analysis, and a decomposition temperature for 10% weight loss above 520 °C both in nitrogen and air atmospheres. The polyimides had low moisture absorptions of 0.23–0.58%, low dielectric constants of 2.84–3.61 at 10 kHz, and an ultraviolet–visible absorption cutoff wavelength at 351–434 nm. Copolyimides derived from the same dianhydrides with an equimolar mixture of 4,4′‐oxydianiline and diamine 2 or 4 were also prepared and characterized. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2416–2431, 2004     

Organosoluble and light‐colored fluorinated polyimides from 4,4′‐bis(4‐amino‐2‐trifluoromethylphenoxy)biphenyl and aromatic dianhydrides

A novel fluorinated diamine monomer based on 4,4′‐biphenol was synthesized via a straightforward, high‐yielding two‐step procedure. 4,4′‐Biphenol was reacted with 2‐chloro‐5‐nitrobenzotrifluoride in the presence of potassium carbonate to yield the intermediate dinitro compound, which was subsequently reduced to afford the fluorinated diamine, 4,4′‐bis(4‐amino‐3‐trifluoromethylphenoxy)biphenyl. A series of organosoluble fluorinated polyimides were prepared from the diamine with various aromatic dianhydrides via a conventional two‐step thermal imidization method. All polyimides were soluble in strong dipolar solvents such as N‐methyl‐2‐pyrrolidone and N,N‐dimethylacetamide. The polyimides showed excellent thermal and thermooxidative stability and good mechanical properties. No significant weight loss was observed below a temperature of 520 °C in nitrogen or in air, and the glass‐transition temperatures ranged from 247 to 313 °C. Low dielectric constants (2.57–3.65 at 10 kHz), low moisture absorption (0.1–0.7 wt %), and low color intensity were also observed. © 2002 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 524–534, 2002; DOI 10.1002/pola.10113