Polysulfone–polydimethylsiloxane block copolymers

Alternating block copolymers have been synthesized from dihydroxyl-terminated polysulfone and bis(dimethylamine)-terminated polydimethylsiloxane oligomers. The products are soluble, amorphous, and transparent, and display excellent thermal and hydrolytic stability. Elastomeric and rigid compositions can be prepared by varying oligomer molecular weight. Copolymers made with oligomers of ≥ 5000 molecular weight are two-microphase systems which display glass transition temperatures at ?120°C and at +160°C, and therefore have a wide useful temperature range.     

Synthesis and properties of polyethersulphone–polydimethyisiloxane block copolymers

High molecular weight alternating block copolymers of polyethesulphone (PES) and polydimethylsiloxane (PDMS) were prepared by the condensation of dimethylamino-terminated PDMS oligomers and hydroxy-terminated PES oligomers in 1,2-dichlorobenzene. Microphase separation of the block copolymers at exceptionally short block lengths was observed by differential scanning calorimetry (DSC) and transmission electron microscopy (TEM). The Si? O? C intersegment linkage in these materials appeared to display poor hydrolytic stability which is contrary to results obtained for other block copolymers.     

Synthesis and properties of new block copolymers based on polydimethylsiloxane and tetraphenylethylene-containing polyimide

New polydimethylsiloxane (PDMS)-polyimide block copolymers were synthesized by the solution polycondensation of aminopropyl-terminated polydimethylsiloxane, 1,1-bis(4-aminophenyl)-2,2-diphenylethylene, and 3,3′,4,4′-benzophenonetetracarboxylic dithioanhydride in pyridine. New 1,3-bis(3-aminopropyl)tetramethyldisiloxane (BADS)-based random copolyimides were also prepared. The inherent viscosities of all the random and block copolyimides were in the range of 0.13–0.90 dL/g in N-methyl-2-pyrrolidone. These copolymers were soluble in N,N-dimethylacetamide, N-methyl-2-pyrrolidone, and m-cresol. All the BADS-based random copolymers and PDMS-containing copolymers with PDMS content above 42 wt % were soluble in tetrahydrofuran and chloroform. Transparent or somewhat cpaque films were prepared by casting from the reaction solutions. The BADS-based random copolyimides had one glass transition temperature (T_g) in the whole composition ranges, which showed single phase nature of the copolymers. On the other hand, the PDMS-polyimide block copolymers had double T_gS, indicating phase-separated morphology. The block copolymers containing PDMS content above 73 wt % behaved like a high temperature elastomer. © 1993 John Wiley & Sons, Inc.     

Styrene–isoprene block copolymers. I. Synthesis and solution properties

Copolymers with a different degree of distribution of styrene and isoprene blocks are prepared by anionic polymerization. The products are characterized by means of ¹H-NMR spectroscopy, GPC, viscometry, and light scattering. The results show that the copolymers are homogeneous in molecular weight and chain composition. In the investigated selective solvents, cyclohexane and base lubricating oil, and equilibrium exists between micelle aggregates and individual polymer coils. The influence of the copolymer structure on the micellization is more pronounced in cyclohexane.     

Synthesis and properties of polystyrene/polydimethylsiloxane graft copolymers

Polystyrene-graft-polydimethylsiloxane (PS-g-PDMS) copolymers with different PDMS content were synthesized by the radical bulk copolymerization of PDMS macromonomer and styrene. The copolymers were characterized by Fourier transform infrared (FT-IR), ¹H-nuclear magnetic resonance (NMR), thermogravimetric analysis (TGA), dynamic mechanical analysis (DMA), transmission electron microscopy (TEM) and the mechanical properties of the copolymers were also carried out. It was indicated that the notched impact strength and elongation at break of the polymers increased with the increase of PDMS content. The thermal stability of PS-g-PDMS is better than that of PS. __________ Translated from Journal of East China University of Science and Technology 2005, 31(2) (in Chinese)     

Synthesis and properties of bisphenol A–terphenol poly(arylene ether sulfone)–polydimethylsiloxane segmented block copolymers

We have synthesized new poly(arylene ether sulfone) (PAES) and polydimethylsiloxane (PDMS) segmented block copolymers where the PAES segments contain 20–30% of 4,4′-dihydroxyterphenol (DHTP) and 70–80% of bisphenol A (BA) units. The tensile and thermal properties of these new polymeric materials were measured and were compared to those of existing bisphenol A PAES–PDMS segmented block copolymers (BA PAES-b-PDMS). Also, a high molecular weight BA–DHTP PAES random copolymer containing 80% BA and 20% DHTP was prepared and its properties were compared to Udel®, a commercial PAES based on BA. The BA–DHTP PAES random copolymer had a significantly higher modulus, 1800 MPa and a higher T_g, 196 °C when compared to Udel®. In the segmented block copolymer materials, increased modulus and tensile strain at break (elongation) were also found when DHTP was incorporated into the PAES segments.     

Synthesis and characterization of polymethylphenylsilane–polystyrene block copolymers

Block copolymers of polymethylphenylsilane (PMPS) and polystyrene (PS) have been successfully prepared by the condensation of α,ω-dichloro-polymethylphenylsilane with polystyryl-lithium. These new materials have been characterized by UV spectroscopy, ²⁹Si-NMR, and size exclusion chromatography. These block copolymers show a good emulsifying activity to compatibilize blends of the two homopolymers (PMPS and PS). © 1993 John Wiley & Sons, Inc.     

Solution properties of polystyrene–polybutadiene block copolymers

Dilute solution viscosity and osmotic pressure measurements were performed on polystyrene (PS), polybutadiene (PB), polystyrene–polybutadiene (SB) diblock and polystyrene–polybutadiene (SBS) triblock copolymers. Anionic polymerization was used in such a way that the molecular weight of the PS block was kept constant (ca. 10 000), while the molecular weight of the PB block varied from 18000 to 450000. The measurements were carried out at a fixed temperature of 34.20°C in three solvents, namely toluene, a good solvent for PS as well as for PB, dioxane, which is a good solvent for PS and almost a theta solvent for PB, and cyclohexane, which is nearly a theta solvent for PS and a good solvent for PB. The compositions of SB and SBS, as derived from kinetic data agree with ultraviolet measurements in CHCl₃ solutions. The viscosity and osmotic pressure results indicate that the properties of SB and SBS are similar. Their intrinsic viscosities and second virial coefficients can be calculated from their chemical compositions, molecular weight, properties of parent polymers, and values of the interaction parameter \documentclass{article}\pagestyle{empty}\begin{document}$\bar \beta _{{\rm SB}}$\end{document} between styrene and butadiene units, for molecular weights not exceeding approximately 10⁵. The magnitude of \documentclass{article}\pagestyle{empty}\begin{document}$\bar \beta _{{\rm SB}} $\end{document} varies with the solvent. The results suggest that the domains of the PS and PB blocks overlap to a great extent.     

Synthesis and properties of p-nitrophenylacetylene–phenylacetylene copolymers

Copolymers of phenylacetylene (PA) and p-nitrophenylacetylene (pNPA) with various monomers ratios were prepared and characterized. The solubility of copolymers is dependent on the number of PA units in the chain. They show a good degree of stereoregularity and the M_W s are in the 10³–10⁵ a.m.u. range, depending on the monomers and catalyst molar ratios. The soluble samples exhibit film-forming properties and the film-surface morphology may be varied by using different solvents. The copolymers give good electrical response to relative humidity variations. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 93–102, 1998     

Surface properties of styrene–ethylene oxide block copolymers

Hydrophobic–hydrophilic block copolymers were prepared by “living” anionic polymerization. They consist of polystyrene and poly(ethylene oxide) blocks, and are soluble in water. Their interfacial properties were investigated, employing aqueous solutions. The block copolymers lowered the surface tension of water in analogy with the low molecular weight surfactants such as sodium lauryl sulfate and heptaethylene oxide n-dodecyl ether. Their aqueous solutions exhibited solubilization properties differing from those of polyethylene glycol. Therefore, it is thought that the polystyrene blocks produce solubilization phenomena. In samples of the same styrene content, the precipitation temperature of a high molecular weight copolymer in water was lower than that of a low molecular weight copolymer at the same concentration in the same solvent. The surface tension and precipitation temperature of aqueous solutions seem to be influenced by molecular weight and composition.     

Synthesis and photophysical characterization of amphiphilic dendritic–linear–dendritic block copolymers

Amphiphilic dendritic–linear–dendritic triblock copolymers based on hydrophilic linear poly(ethylene oxide) (PEO) and hydrophobic dendritic carbosilane were synthesized with a divergent approach at the allyl end groups of diallyl‐terminated PEO. Their micellar characteristics in an aqueous phase were investigated with dynamic light scattering, fluorescence techniques, and transmission electron microscopy. The block copolymer with the dendritic moiety of a third generation could not be dispersed in water. The block copolymers with the first (PEO–D ‐Si‐1G) and second (PEO–D ‐Si‐2G) generations of dendritic carbosilane blocks formed micelles in an aqueous phase. The critical micelle concentrations of PEO–D ‐Si‐1G and PEO–D ‐Si‐2G, determined by a fluorescence technique, were 27 and 16 mg/L, respectively. The mean diameters of the micelles of PEO–D ‐Si‐1G and PEO–D ‐Si‐2G, measured by dynamic light scattering, were 170 and 190 nm, respectively, which suggests that the micelles had a multicore‐type structure. The partition equilibrium constants of pyrene in the micellar solution increased with the increasing size of the dendritic block (e.g., 7.68 × 10⁴ for PEO–D ‐Si‐1G and 9.57 × 10⁴ for PEO–D ‐Si‐2G). The steady‐state fluorescence anisotropy values (r) of 1,6‐diphenyl‐1,3,5‐hexatriene were 0.06 for PEO–D ‐Si‐1G and 0.09 for PEO–D ‐Si‐2G. The r values were lower than those of the linear polymeric amphiphiles, suggesting that the microviscosity of the dendritic micellar core was lower than that of the linear polymeric analogues. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 918–926, 2001     

Synthesis and characterization of poly（phthalazinone ether nitrile） （PPEN）-polydimethylsiloxane （PDMS） block copolymers

Block copolymers with different backbone compositions have been prepared by the condensation of dimethylamino terminated poly（dimethylsiloxane） （PDMS） and hydroquinone terminated poly（phthalazinone ether nitrile） （PPEN） in the presence of chlorobenzcne/N-methyl pyrrolidone （NMP） as solvents. The products were characterized by FTIR, ^1H NMR and gel permeation chromatography. Differential scanning calorimetry analysis indicated that the block copolymers showed separated microphase.     

Synthesis and characterization of polysiloxane–polyamide block and graft copolymers

The synthesis of copolymers constituted of a central polydimethylsiloxane (PDMS) block flanked by two polyamide (PA) sequences is described. α, ω-diacyllactam PDMS, when used as macroinitiator of lactam polymerization, gives rise to the expected triblock copolymer. Likewise, PDMS-g-PA graft copolymers are obtained from acyllactam containing polysiloxanes. NaAlH₂(OCH₂CH₂OMe)₂ turns out to be the best suited activating agent for the polymerization of ?-caprolactam, in the experimental conditions required for the synthesis of polysiloxane–polyamide copolymers. The nucleophilic species formed by reaction of NaAlH₂(OCH₂CH₂OMe)₂ with ?-caprolactam—2-[bis(methoxyethoxy) aluminumoxy]-1-azacycloheptane sodium—is indeed nucleophilic enough to bring about the growth of PA chains and mild enough to stay inert towards PDMS. © 1993 John Wiley & Sons, Inc.     

Synthesis and characterization of polycholesteryl methacrylate–polyhydroxyethyl methyacrylate block copolymers

We report the synthesis and characterization of a series of novel diblock copolymers, poly(cholesteryl methacrylate‐b‐2‐hydroxyethyl methacrylate) (PCMA‐b‐PHEMA). Monomers, cholesteryl methacrylate (CMA) and 2‐(trimethylsiloxy)ethyl methacrylate (HEMA‐TMS), were prepared from methyacryloyl chloride and 2‐hydroxyethyl methacrylate, respectively. Homopolymers of CMA, PCMA, with well‐defined molecular weights and polydispersity indices (PDI), were prepared by reversible addition fragmentation and chain transfer (RAFT) method. Precursor diblock copolymers, PCMA‐b‐P(HEMA‐TMS), were synthesized using PCMA as macromolecular chain transfer agent and monomer, HEMA‐TMS. Product diblock copolymers, PCMA‐b‐PHEMA, were prepared by deprotecting trimethylsilyl units in the precursor diblock copolymers using acid catalysts. Detailed molecular characterization of the precursor diblock copolymers, PCMA‐b‐P(HEMA‐TMS), and the product diblock copolymers, PCMA‐b‐PHEMA, confirmed the composition and structure of these polymers. This versatile synthetic strategy can be used to prepare new amphiphilic block copolymers with cholesterol in one block and hydrogen‐bonding moieties in the second block. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6801–6809, 2008     

Synthesis and properties of ABA propylene-ethylene block copolymers

Experimental data, which includes catalyst lifetimes, thermal analyses, fractionation by urea complexation, x-ray diffraction, and ¹³C-NMR spectroscopy, are presented to confirm the successful synthesis of ABA propylene-ethylene block copolymers. A dry catalyst system of DEAC-TiCl₃(AA) and a gas-phase polymerization technique was used to prepare the copolymers. PRP-and ERE-type copolymers (P-isotactic polypropylene, E-polyethylene, and R-random propylene-ethylene copolymer block) were prepared. Some preliminary physical property data are given which indicate that PRP-type copolymers can behave as elastomeric fibers. The stress-strain behavior also indicates block copolymer formation.     

Amylose–polyester block copolymers

The synthesis of amylose–polyester block copolymers is described. 2,3,6-Tri-0-allyl amylose was synthesized by amylose alkoxide and allyl bromide and hydrolyzed by hydronium ions to give an hydroxyl-terminated allyl amylose oligomer (HTAA). The allyl groups were isomerized with t-BuoK to yield the prop-1-enyl isomer (HTPA). The HTPA was capped with a diisocyanate. The HTPA prepolymer was reacted with hydroxy-terminated poly(ethylene-co-propylene adipate) and poly-(ethylene terephthalate) to form block terpolymers. Block terpolymer formation was demonstrated by intrinsic viscosity increases, gel permeation chromatographic results, and infrared (IR) and PMR spectroscopy. The products were depropenylated by HgCl₂ to yield amylose block terpolymers. These polymers were readily degraded by α-amylase.     

Polyimide–polyformal block copolymers

In an effort to combine and tailor the properties of thermoplastic resins we have investigated the synthesis of polyimide–polyformal block copolymers prepared by the condensation reaction of α,ω-diamino functionalized polyformal oligomers with α,ω-dianhydride terminated polyimide oligomers. Amino functionalized polyformal oligomers were synthesized by displacement condensation reactions of various bisphenols with methylene dihalides in the presence of base and aminophenols. Oligomeric aromatic polyformals having weight average molecular weights (MW_w) of 7500 to 40,000 were obtained. Anhydride terminated polyimide oligomers with molecular weights (MW_w) ranging from 10,000 to 15,000 were obtained by the condensation of bisphenol-A–dianhydride and aromatic amines. Combining the polyimide oligomers with the polyformal oligomers in dipolar aprotic or nonpolar solvents afforded the desired block copolymers. The polyimide–polyformal block copolymers generally display two distinct glass transition temperatures by differential scanning calorimetry. The (AB)_n block copolymers were evaluated by TGA in both air and N₂ for thermal/oxidative stability.     

Synthesis and impact properties of siloxane–DGEBA epoxy copolymers

Siloxane-incorporated epoxy (ESDG) copolymers were prepared by a hot-melt method. IR, ¹H- and ¹³C-NMR are used to determine the structures. The data on the molecular properties indicate that reaction proceeded with a random polycondensation without involving the opening of the oxirane ring in the epoxy structure. Lowering T_gs with increasing siloxane content in copolymers are observed except for the copolymer modified with PDMS siloxane oligomer. Thermal stability data indicate that siloxane moiety exerts its thermal stability on the copolymer through dissipation of the heat, thus delaying thermal degradation of copolymers. Increasing impact strengths in J/M in the range of 22.0–59.0 are observed for copolymers and the improvement of the impact strength is closely related to the structure and content of siloxane oligomers in copolymers. A rough surface was observed by SEM examination on the propagation surface of the copolymeric impact specimen, while a smooth surface is observed on the unmodified epoxy specimen. The EDX analysis reveals these protruded features are Si-rich segments. The morphological observations suggest the siloxane segment may act as a toughening agent in the epoxy networks, thus contributing to the impact improvement of the copolymers. © 1996 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 34:1907–1922, 1996     

Synthesis and surface properties of amphiphilic block copolymers polyvinylpyrrolidone-block-polystyrene

Amphiphilic block copolymers of N-pyrrolidone and styrene were prepared by chain transfer to organogermanium compounds bis(pentafluorophenyl)germane and tris(pentafluorophenyl)germane. The relative chain-transfer constants were determined. The surface properties of the isolated block copolymers with various numbers of units in the hydrophilic block were studied. The polar and dispersive components of the surface tension of films of the amphiphilic block copolymers were calculated by the Zisman method.