Polymerization of liposomes composed of diene-containing lipids by radical initiators. II. Polymerization of monodiene-type lipids as liposomes

1-Palmitoyl-2(2,4-octadecadienoyl)-sn-glycero-3-phosphocholine (POPC), a polymerizable lipid that contains one diene group in only a 2-acyl chain, was polymerized as liposome in an aqueous medium. Polymerization was initiated by water-insoluble azobisisobutyronitrile (AIBN), or water-soluble azobis(2-amidinopropane) dihydrochloride (AAPD). AIBN was mixed with monomeric lipids, and the mixture was dispersed in an aqueous medium by sonication to prepare AIBN-containing monomeric lipid liposomes. On the other hand, AAPD was simply added to the liposome suspension. The POPC liposomes were easily polymerized by the addition of AAPD, a water-soluble radical initiator, but few were polymerized by AIBN. The results suggested that the diene group in the 2-acyl chain was in an aqueous phase and, therefore, easily polymerized by a water-soluble radical initiator. The polymerized POPC liposomes were revealed to be more stable than those of monomeric ones because the scattered-light intensity from the polymerized POPC liposome suspension changed a little by the addition of Triton X-100. For only the polymerized ones, the liposome structure was confirmed by TEM after addition of an excess amount of Triton X-100.     

Gamma-ray polymerization of phospholipids having diene or triene groups as liposomes

Small unilamellar liposomes were prepared in an aqueous medium by the sonication of phospholipids containing diene or triene groups in their hydrocarbon acyl chains. These liposomes were polymerized by gamma-ray irradiation. Conversion of polymerization was successively followed by UV spectrometry. Diene-type lipid liposomes were revealed for which a gamma-ray dose of 0.8 Mrad was required for complete polymerization and which were polymerized more easily than triene-type lipid liposomes. Triene-type lipids required 2.3 Mrad gamma ray to polymerize them completely. Contrary to UV-irradiation polymerization, there was no concentration dependence on the polymerization. Structure of the polymerized liposomes were confirmed by electron microscopy as small unilamellar liposomes. Study on the leakage of fluorescein from inner aqueous phase of the polymerized liposomes revealed that polymerized triene-type liposomes were relatively more stable than the polymerized diene-type liposomes.     

Stable polymeric nanoballoons: lyophilization and rehydration of cross-linked liposomes

The cross-linking of supramolecular assemblies of hydrated lipids is an effective method to stabilize these assemblies to disruption by surfactants or aqueous alcohol. The heterobifunctional lipids, Acryl/DenPC(16,18) and Sorb/DenPC(18,21), are examples of a new class of polymerizable lipid designed for the creation of cross-linked lipid structures. The robust nature of cross-linked liposomes was demonstrated by lyophilization of the liposomes followed by their essentially complete redispersion in water. The resulting liposomes were compared to the original sample by quasi-elastic light scattering and transmission electron microscopy. There was no major change in the size or structure of the cross-linked liposomes after rehydration of the freeze-dried powder of liposomes. Moreover, the rehydrated cross-linked liposomes continued to be resistant to surfactant solubilization. Neutral cross-linked liposomes were predominantly redispersed after freeze-drying with the aid of bath sonication. The small amount of residual liposome aggregation observed with neutral liposomes could be prevented by incorporating a surface charge into the liposome or attaching hydrophilic polymers, for example, poly(ethylene glycol), onto the liposome.     

In vitro and in vivo stability of polymerized mixed liposomes composed of 2,4‐octadecadienoyl groups of phospholipids

The in vitro stability, under freeze–thawing procedures, and in vivo degradation, in rat spleen, of two types of polymerized liposomes were examined: 1,2‐bis‐[2E, ­4E) ‐ octadecadienoyl] ‐ sn ‐ glycero ‐ 3 ‐ phosphocholine (DODPC) and 1‐acyl‐2‐[(2E, 4E)‐octadecadienoyl]‐sn‐glycero‐3‐phosphocholine (AODPC) were used as polymerizable phospholipids. The lipid composition of the liposomes was prepared as DODPC/Chol/SA (Chol = cholesterol, SA = stearicacid), AODPC/Chol/SA (7/7/2 by molar ratio), AODPC/DPPC/Chol/SA (3.5/3.5/7/2 by molar ratio). The liposomes were extruded through a 0.2 µm polycarbonate‐ filter to obtain the approximate particle size of 0.2 µm, and then irradiated with γ‐rays. Hemoglobin‐encapsulated liposomes were also prepared in the same manner with concentrated hemoglobin (Hb) solution. The DODPC/Chol/SA liposome exhibited no trace of particle size change nor Hb leakage. Although not as excellent as the former, the AODPC‐base liposome showed slightly diameter change (below 7.5%) with a substantial abatement of Hb leakage (<3.5%). Transmission electron microscopy observation of spleens also revealed more efficient degradability with AODPC/DPPC/Chol/SA liposome than with DODPC/Chol/SA liposome. Hb‐encapsulated AODPC/DPPC/Chol/SA liposome, after five freeze–thawing cycles, attained an Hb leakage below 3.5% with a particle size change of 0.7–7.5%, and reduced the spleen retention compared with the DODPC‐base liposome. These results suggest that AODPC/DPPC/Chol/SA liposome can be used as a long‐term preservable blood substitute. Copyright © 2000 John Wiley & Sons, Ltd.     

Polymerization of 1-bromo-2-phenylacetylene

The title monomer was polymerized by thermal initiation and the polymers were analyzed by IR, NMR, and GPC. The polymers were found to be low molecular weight species that had eliminated bromine as the polymerization progressed. In addition, initiation with AIBN was attempted, however, no difference in rate of polymerization, percent conversion, or molecular weight was noted between these polymers and those synthesized by thermal initiation. Also, no initiator fragments were found in the polymers.     

Temperature dependence of the leakage of carboxy fluorescein from an inner aqueous phase of liposomes or mixed liposomes

Small unilamellar liposomes with an average diameter of about 500 Å containing carboxy fluorescein in an inner aqueous phase were prepared by 20 min sonication (60 W) of the aqueous dispersions of dimyristoyl-, dipalmitoyl-, or distearoyl phosphatidylcholine. The excess carboxy fluorescein in an outer aqueous phase was expelled by a Sepharose CL-4B column. The leaked carboxy fluorescein was analyzed successively by fluorescence spectroscopy at different temperatures. A rapid leakage was observed at the main phase transition temperature. On the other hand, little leakage was recorded below and above the phase transition temperature. The leakage was also observed around the main transition temperature when liposome suspensions were heated or cooled. Mixed liposomes, composed of two different lipids having different phase transition temperatures, showed a CF leakage at the lower transition temperature for the mixed liposomes. A good linear relationship was found between the transition temperature and the temperature where the fastest CF leakage was recorded for several liposomes. It is concluded that the leakage is not due to a simple increase in molecular motion at higher temperatures but is due to a transient structural disorder of the lipid packing induced by the phase separation.     

含双疏水侧链聚磷酸酯脂质体膜材的合成

以季戊四醇二脂肪酸酯和Ｐ，Ｐ 二氯磷酸β 溴乙酯为单体，通过溶液缩聚反应合成聚磷酸酯，再经季铵化反应得到三种新的含双疏水侧链的磷脂酰胆碱型聚磷酸酯脂质体膜材．采用逆相蒸发法制备脂质体．电镜观察表明，所有聚合物都能形成脂质体，其直径为２～６μｍ．还研究了对抗肿瘤药物５ 氟脲嘧啶的包封，其包封率为３０％．     

聚磷酸酯型脂质体膜材的合成

以Ｐ，Ｐ－二氯磷酸β一溴乙酯和α－硬脂酸单甘油酯为单体，通过缩聚反应合成聚磷酸醋，再经季铵化制备了四种新的聚磷酸酸型脂质体膜材．用逆相蒸发法制备了脂质体，并以５－氟尿嘧啶为模型药物进行包封，测定了包封率和体外释放性能．     

RAFT聚合合成高分子量嵌段聚合物

以合成高分子量聚合物为目标,以苯基二硫代乙酸-1-苯基乙酯(PEPDTA)作为RAFT试剂,研究引发剂的种类(偶氮二异丁腈(AIBN)、1-1′-偶氮环己腈(ACC))、用量及聚合温度对苯乙烯/丙烯酸丁酯RAFT共聚合过程和聚合物结构的影响.结果发现,由于体系中RAFT浓度很低,相应的引发剂浓度要比传统自由基聚合低得多,只有采用较高的聚合温度和低分解速率常数的引发剂(ACC),才能制得无活性聚合物分率低(<0.1)、分子量高的聚合物,并进一步得到杂质含量少、分子量分布窄的嵌段聚合物.     

The effect of added liposomes on the rheological properties of a hydrogel: a systematic study

Rheological characteristics of liposome-containing-hydrogels were studied. Sonicated unilamellar vesicles (SUV), prepared by probe sonication and multilamellar vesicles (MLV) prepared by thin film hydration were loaded in a hydrogel containing carbopol 974 NF and hydroxyethylcellulose (Natrosol 250 HX). Phosphatidylcholine (PC) or hydrogenated-PC (HPC) liposomes, plain or mixed with cholesterol (chol) were used. Static (steady-stress sweep-tests) and dynamic (frequency sweep-tests) rheological measurements were carried out. All gels had a shear thinning behaviour (fitted well by Cross model). Zero-rate shear viscosity and power law index values, revealed that PC liposome addition in the hydrogel had minimum effect on its rheological properties even at the highest lipid concentration used (20 mg/ml). Oppositely, HPC (or HPC/chol) liposome addition resulted in significant modulations of the same rheological characteristics (which increased with increasing lipid concentration). HPC liposomes also caused a significant increase in gel relaxation time, which indicates that the elastic character of the gel strengthens as HPC liposome concentration increases. Concluding, liposome composition (membrane rigidity) and lipid concentration, but not liposome size, seem to be very important factors that determine the rheological modulations caused by liposome addition in gels.     

pH sensitivities of egg phosphatidylcholine liposomes and dioleoylphosphatidylethanolamine liposomes triggered by poly(<Emphasis Type="Italic">N</Emphasis>-isopropylacrylamide-co-methacrylic acid-co-octadecylacrylate)

Egg phosphatidylcholine (PC) liposomes bearing pH-sensitive polymers and dioleoylphosphatidylethanolamine (DOPE) liposomes including the same polymers were prepared by a sonication method. As pH-sensitive polymers, copolymers of N-isopropylacrylamide, methacrylic acid, and octadecylacrylate were used. The liposomes were stable in neutral pH ranges in terms of release. But the release became marked at pH 5.5, and it was accelerated as pH further decreased. For example, the degree of release from egg PC liposomes (polymer/lipid ratio is 3:10, w/w) for 120 s increased from 2% to 63% as pH decreased from 7.5 to 4.5. Under the same condition, the degree of release from DOPE liposomes increased from 4% to 80%. These results indicate that DOPE liposome is more pH-sensitive than egg PC liposome.     

Liposome-Based Optochemical Nanosensors

 This paper describes the optochemical pH and oxygen sensing properties of dye-encapsulating and fluorescently labeled nano-sized unilamellar liposomes. To prepare the oxygen sensitive liposomes a lipid mixture consisting of dimyristoylphospatidylcholine, cholesterol, and dihexadecyl phosphate (molar ratio 5:4:1) all dissolved in dry isopropyl alcohol is injected into a sensing dye solution. The mixture is then sonicated with a liposome maker to form dye-encapsulating liposomes. A lipid mixture consisting of dimyristoylphospatidylcholine, N-(fluorescein-5-thiocarbamoyl)-1,2-dihexadecanoyl-sn-glycero-3-phosphoethanolamine triethylammonium salt (fluorescein DHPE), cholesterol, and dihexadecyl phosphate (molar ratio 20:1:16:4) is used to prepare the pH sensitive liposomes by the same sonication technique. Fluorescein labeled DHPE phospholipids are combined with DMPC phospholipids in a 1:20 ratio to incorporate the sensing dye directly into the bilayer membrane, virtually eliminating any instability due to dye leakage. Oxygen sensing liposomes are created by encapsulating the oxygen sensitive ruthenium tris(1,10)-phenanthroline complex [Ru(phen)₃]. The dye is believed to exist both in free solution within the liposome, and as an adherent on the inner membrane of the liposome. High uniformity of the liposomes is realized by extruding them back and forth through a 100 nm pore-size polycarbonate membrane. TEM images of the liposomes, stained with uranyl acetate, show that the liposomes are unilamellar, spherical in shape, maintain high structural integrity, and average 70 nm in diameter. The liposomes show high stability with respect to dye leaking at room temperature for 8 days, and high photostability when exposed to the excitation light. Individual liposomes are used to monitor the pH and oxygen level in their vicinity during the enzymatic oxidation of glucose by the enzyme glucose oxidase. The newly prepared environmentally sensitive liposomes can be applied for non-invasive pH and oxygen determination in tissues and single biological cells. Received June 8, 1998. Revision November 10, 1998.     

Synthesis,polymerization, and isomerization of isoimide containing acrylate esters

Several isoimides substituted with hydroxylated substituents were prepared, and allowed to react with acryloyl chloride to form the corresponding acrylate esters. The acrylates were polymerized free radically using AIBN as the initiator yielding medium molecular weight polyacrylates. Upon warming the prepared polyacrylates or treatment with base most of the isoimide pending groups rearranged to the stable form of the corresponding imides. These rearrangements were accompanied by increase in softening points of the polymers forming thermally more stable resins. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3125–3130, 1997     

Synthesis and thermal properties of liquid-crystalline polyacrylates containing a carbazolyl group in the mesogen

The new acrylate monomers 4-(ω-acryloyloxyalkyloxy)-N-(9-methyl-2-carbazolylmethylene) anilines containing from 2 to 11 methylenic units in their alkyl group and a carbazolyl group in the mesogenic unit were synthesized and polymerized by azobisisobutyronitrile (AIBN) as radical initiator and by low-energy electron beam (EB) initiation. The thermal properties of the resulting polymers were examined using differential scanning calorimetry and thermal optical polarizing microscopy. The polymer prepared by AIBN with a hexamethylene spacer exhibited a nematic phase from 73 to 170°C and with an undecamethylene spacer exhibited a smectic phase from 55 to 202°C. The isotropization temperature of the polyacrylates increased with increasing the number of carbons of the methylenic spacer. The yield of the resulting polymer was changed by EB irradiation temperature from 4.5 to 41%. The highest yield was obtained when the monomer was polymerized in a liquid-crystalline phase. The same tendency was observed in the molecular weight of the resulting polymers. © 1994 John Wiley & Sons, Inc.     

Stabilization of small unilamellar DMPC-liposomes by uncharged polymers

 Polymer-free and polymer-bearing small unilamellar (SUV) liposomes from dimyristoyl-phosphatidylcholine (DMPC) were prepared under standardized conditions. Polymer-bearing liposomes were formed by incorporating an uncharged polymer [hydrolyzed poly(vinyl alcohol) (PVA), poly(vinyl alcohol-co-vinylacetal) (PVA-Al), poly(vinyl alcohol-co-vinyl propional) (PVA-Prol) poly(vinyl alcohol-co-vinyl butiral) (PVA-Bul) copolymer or poly(vinyl pyrrolidone) (PVP)] into the membrane bilayer of vesicles. The kinetic (long-term) stability of the liposome dispersions stored in distilled water, in physiological NaCl solution and at various pH values, respectively, were studied. The physical stability of vesicles was tested by measuring the size and the zeta potential of liposomes by means of a Malvern Zetasizer 4 apparatus. It was shown that most of these polymers are effective steric stabilizers for the DMPC-liposomes. Among the polymers, the PVA-Bul and PVA-Prol copolymers and the PVP of high molecular mass exhibited the most efficient stabilizing effect at each pH studied, indicating that the formation of a relatively thick polymer layer around the lipid bilayers ensures an enhanced and prolonged physical stability of liposomes. Also, the butiral or propional side chain in the PVA-based copolymers presumably promotes the anchoring of macromolecules to the vesicles. Using these macromolecules, the colloidal interactions between vesicles can be modified and so the physical stability of liposomes and the kinetic stability of liposome dispersions can also be controlled. Received: 20 May 1997 Accepted: 03 September 1997     

Synthesis and kinetic analysis of DPE controlled radical polymerization of MMA

The 1,1‐diphenylethene (DPE) controlled radical polymerization of methyl methacrylate was performed at 80 °C by using AIBN as an initiator and DPE as a control agent. It was found that the molecular weight of polymer remained constant with monomer conversion throughout the polymerization regardless of the amounts of DPE and initiator in formulation. To understand the result of constant molecular weight of living polymers in DPE controlled radical polymerization, a living kinetic model was established in this research to evaluate all the rate constants involved in the DPE mechanism. The rate constant k₂, corresponding to the reactivation reaction of the DPE capped dormant chains, was found to be very small at 80 °C (1 × 10^?5 s^?1), that accounted for the result of constant molecular weight of polymers throughout the polymerization, analogous to a traditional free radical polymerization system that polymer chains were terminated by chain transfer. The polydispersity index (PDI) of living polymers was well controlled <1.5. The low PDI of obtained living polymers was due to the fact that the rate of growing chains capped by DPE was comparable with the rate of propagation. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2009     

Influence of lipid composition on the thermotropic behavior and size distribution of mixed cationic liposomes

Cationic liposomes are studied mainly as nonviral nucleic acid delivery systems and to a lesser extent as carriers/adjuvants of vaccines and as low-molecular-weight drug carriers. It is well established that the performance and the biological activity of liposomes in general are strongly related to their physicochemical properties. We investigated the thermotropic behavior and the size distribution of mixed cationic liposomes formulated with different percentages of 1,2 dimyristoyl-sn-glycero-3-phosphatidylcholine and one of four cationic amphiphiles characterized by a pyrrolidinium headgroup with the aim of achieving a better understanding of how the molecular structure of the cationic amphiphile and its mole percentage affect the physicochemical properties of the liposomes. Multilamellar vesicles and large unilamellar vesicles were studied by differential scanning calorimetry and turbidity, respectively, to characterize the thermotropic behavior and lipid phase, whereas dynamic light scattering was used to determine size distribution. This study shows that subtle modifications in the cationic amphiphile's molecular structure and in liposome composition may have dramatic effects on the organization of the liposome bilayer and hence on the morphological and physicochemical features of the liposomes, thus being highly relevant to the biological features investigated previously.     

Effect of lipid headgroup composition on the interaction between melittin and lipid bilayers

The effect of the lipid polar headgroup on melittin-phospholipid interaction was investigated by cryo-TEM, fluorescence spectroscopy, ellipsometry, circular dichroism, electrophoresis and photon correlation spectroscopy. In particular, focus was placed on the effect of the lipid polar headgroup on peptide adsorption to, and penetration into, the lipid bilayer, as well as on resulting colloidal stability effects for large unilamellar liposomes. The effect of phospholipid headgroup properties on melittin-bilayer interaction was addressed by comparing liposomes containing phosphatidylcholine, -acid, and -inositol at varying ionic strength. Increasing the bilayer negative charge leads to an increased liposome tolerance toward melittin which is due to an electrostatic arrest of melittin at the membrane interface. Balancing the electrostatic attraction between the melittin positive charges and the phospholipid negative charges through a hydration repulsion, caused by inositol, reduced this surface arrest and increased liposome susceptibility to the disruptive actions of melittin. Furthermore, melittin was demonstrated to induce liposome structural destabilization on a colloidal scale which coincided with leakage induction for both anionic and zwitterionic systems. The latter findings thus clearly show that coalescence, aggregation, and fragmentation contribute to melittin-induced liposome leakage, and that detailed molecular analyses of melittin pore formation are incomplete without considering also these colloidal aspects.     

Contrasting behavior of zwitterionic and cationic polymers bound to anionic liposomes

Zwitterionic polymers were prepared by quaternizing polyvinylpyridine (DP = 1100) with bromoacids (Br(CH2)nCOOH, where n = 1, 2, 3, and 5). The resulting polymers were then added to unilamellar liposomes composed of egg lecithin or dipalmitoylphosphatidylcholine admixed with 20 mol % of cardiolipin (a phospholipid with two negative charges). These systems were compared (along with polyethylvinylpyridinium chloride, a polycation) by light scattering, electrophoretic mobility, fluorescence, and high-sensitivity differential scanning calorimetry. The external zwitterionic polymers induce no flip-flop of cardiolipin from the inner leaflet to the outer leaflet as does the polycation. Aside from this similarity, the four zwitterionic polymers all behave differently from each other toward the anionic liposomes: (a) For n = 1, there is no detectable interaction between the polymer and the liposomes. (b) For n = 2, electrostatic attraction induces polymer-liposome association (reversed by the addition of NaCl) that maintains the original negative charge on the liposome. Aggregation of the liposomes accompanies polymer adsorption. (c) For n = 3, electrostatic binding also occurs along with aggregation. However, the binding is so strong that NaCl is unable to induce polymer/liposome dissociation. (d) For n = 5, there is polymer binding and NaCl-promoted dissociation but no substantial aggregation. These differences among the closely related polymers are discussed and analyzed in molecular terms.     

Synthesis and free radical polymerization of N-substituted citraconimides

N-phenyl and N-cyclopropylcitraconimides did not polymerize as free radicals with azobisisobutyronitrile (AIBN) as initiator. N-allylcitraconimide, however, depending on the temperature and concentrations of the reactions, readily polymerized to produce polymers of different molecular weights. These polymers contained as much as 85% cyclic repeating units when the polymer exhibited an average molecular weight of ca. 4000. The softening point of the polymer was higher than 350°C and the compound was highly soluble in many organic solvents. The allylic CH₃group in N-substituted citraconimides and in their corresonding citraconamic acids could not be brominated with N-bromosuccinimide.