Study of the properties of rigid and plasticized PVC/PMMA blends

The aim of this work is to study the structure-properties relationship of rigid and plasticized PVC/PMMA blends. For that purpose, blends of variable compositions were prepared in the absence and in the presence of a plasticizer di (ethyl-2 hexyl) phtalate or DEHP. The miscibility of the two polymers was investigated by differential scanning calorimetric analysis (DSC) and Fourier transform infrared spectroscopy. The weight loss from 30 to 600°C was investigated by thermogravimetric analysis (TGA). The thermal degradation under nitrogen at 185°C was studied and the amount of HCl released from PVC was measured by the pH method. Furthermore, the variation of mechanical properties such as tensile behavior, hardness and impact resistance was investigated for all blend compositions.     

Effect of epoxidized sunflower oil on polylactic acid properties

Epoxidized sunflower oil (ESO) was utilized as a plasticizer for polylactic acid (PLA) using chloroform as a solvent by a solution casting process at various ratios of PLA to ESO. Fourier-transform infrared (FTIR) spectroscopy was used to identify the functional groups of PLA, ESO, and PLA/ESO blends. Thermal stability and mechanical and morphological properties of the blends were investigated by thermogravimetric analysis, tensile property measurements, and scanning electron microscopy technique, respectively. The FTIR spectra indicate that there are some molecular interactions by intermolecular hydrogen bonding between PLA and ESO. PLA/ESO blends show high thermal stability and significant improvement of mechanical properties compared with pure PLA. The highest elongation at break was obtained when the ratio of the PLA/ESO blend was 80/20. Morphological results of PLA/ESO blends show that ESO was well miscible with PLA.     

Cellulose acetate butyrate as multifunctional additive for poly(butylene succinate) by melt blending: Mechanical properties, biomass carbon ratio, and control of biodegradability

We have evaluated the plasticizing effect of poly(butylene succinate) (PBS) and cellulose acetate butyrate (CAB). PBS and CAB were mixed with a melt-kneading machine. The tensile strength and strain at break in the case of the blend with 10% CAB in the PBS matrix were 547% and 35 MPa. It showed that CAB acted as a plasticizer for PBS. The biomass carbon ratio of the blends measured by accelerator mass spectrometry based on ASTM D6866 showed that the biomass carbon derived from a part of the CAB corresponded to the theoretical value of the polymer blend. The biodegradation of PBS with the CAB melt blend powders was evaluated by a microbial oxidative degradation analyzer under controlled compost conditions based on ISO 14855-2. PBS with 10% CAB was not degraded within 60 days due to the addition of CAB that could control the biodegradability of the PBS.     

Physical characterization of coupled poly(lactic acid)/starch/maleic anhydride blends plasticized by acetyl triethyl citrate

Acetyl triethyl citrate (ATC) was used as a plasticizer for poly(lactic acid) (PLA)/starch blends coupled with maleic anhydride and an initiator of 2,5-bis(tert-butylperoxy)-2,5-dimethylhexane (L101). Elongation of the blend at break was markedly increased when the ATC content was above the 8% loading level, which is referred to as the percolation threshold. The extended elongation was achieved at the expense of tensile strength and elastic modulus. Thermal transitions of the blend, including the glass transition temperature (T(g)), cold crystallization temperature (T(c)) and melting temperature (T(m)), decreased with ATC content. Thermally induced ATC migration affected the thermal behavior of the plasticized blends and reduced elongation and tensile strength, whereas the elasticity modulus increased. ATC migration increased with ambient temperature, which was controlled by the activation energy of the blend system. Leaching of ATC was slow at room temperature in distilled water, but significant in boiling water. Additionally, the leaching rate was also directly proportional to the ATC content of the blend. Glass transition temperatures of PLA/starch/MA/L101 blends with various acetryl triethyl citrate contents.     

Thermogravimetric and dynamic mechanical analysis of LLDPE/EMA blends

The thermal stability of linear low density polyethylene (LLDPE)/ethylene methyl acrylate (EMA) blends was studied using thermogravimetry. The blend ratio as well as the presence of compatibilizer has significant effect on thermal stability of the blends. The compatibilization of the blends using LLDPE-g-MA has increased the degradation temperature. Phase morphology was found to be one of the most decisive factors that affected the thermal stability of both uncompatibilized and compatibilized blends. Dynamic mechanical behavior of the blend was studied by dynamic mechanical analysis. The storage modulus of the blends decreased with increase in EMA content. When compatibilized with LLDPE-g-MA the storage modulus of the blend increases. LLDPE-g-MA is an effective compatibilizer as it increases the thermal stability and modulus of the blend.     

Reactive processing with difunctional oligomers to compatibilize polymer blends

The addition of telechelic reactive oligomers to a polymer blend as a compatibilization process is investigated. The results presented in this paper suggest that this process provides a mechanism by which blocky copolymeric compatibilizers can be formed during processing, as demonstrated by the changes in the mechanical and optical properties of the phase separated polymer blends. The results also show, however, that the presence of unreacted smaller oligomers can act as a plasticizer in the blend and can thus detrimentally affect the mechanical properties of the blend if any remains after processing. Careful control of the mixing conditions or post processing thermal annealing may be required to minimize this potentially deleterious effect. However, the data suggest that this optimization is possible.     

Mechanical and Rheological Behavior of Unvulcanized and Dynamically Vulcanized i-PP/EPDM Blends

The mechanical and rheological behavior of dynamically vulcanized PP/EPDM blends is examined and compared with those of unvulcanized blends. The effect of blend ratio and dynamic vulcanization of EPDM rubber on tensile properties and flow are investigated. The mechanical properties of the blends are strongly influenced by the blend ratio. With the increasing of EPDM content the value of yield stress in a solid state decreases with the elastomer volume fractions less than 0.45 for the unvulcanized blends. For the dynamically vulcanized blends the interval of EPDM content, at which the yield peak is seen, is rather limited below 0.25 elastomer volume fractions. It is shown that dynamic vulcanization changes the deformational behavior of PP/EPDM blends. The rheological properties of dynamically vulcanized blends depending on the ratio of the components may be similar to the properties of polymer composites containing the highly disperse structuring filler. The distinction between the rheological behavior of unvulcanized and dynamically vulcanized blends is related to differences of their structures and viscoelastic characteristics of unvulcanized and vulcanized EPDM phase.     

Thermal and mechanical properties of UV irradiated collagen/chitosan thin films

The thermal and mechanical properties of collagen/chitosan blends before and after UV irradiation have been investigated using thermal analysis and mechanical (Instron) techniques. Comparisons were made with the thermal and mechanical properties of both collagen and chitosan films. Air-dried collagen, chitosan and collagen/chitosan films were exposed to UV irradiation (wavelength 254 nm) for different time intervals. Thermal properties of collagen/chitosan blends depend on the composition of the blend and are not significantly altered by UV irradiation.Mechanical properties such as ultimate tensile strength and ultimate percentage of elongation were much better for collagen films than for collagen/chitosan films. The results have shown that the mechanical properties of the blends were greatly affected by the duration of UV irradiation. Ultimate tensile strength and ultimate percentage elongation decreased after UV irradiation of the blend. Increasing UV irradiation leads to an increase in Young's modulus of the collagen/chitosan blend.     

Effect of poly(vinyl acetate) (PVAc) on thermal behavior and mechanical properties of poly(3-hydroxybutyrate)/poly(propylene carbonate) (PHB/PPC) blends

To assess the compatibility of blends of synthetic poly(propylene carbonate) (PPC), with a natural bacterial poly(3-hydroxybutyrate) (PHB), a simple casting procedure of blend was used. poly(3-hydroxybutyrate)/poly(propylene carbonate) blends are found to be incompatible according to DSC and DMA analysis. In order to improve the compatibility and mechanical properties of PHB/PPC blends, poly(vinyl acetate) (PVAc) was added as a compatibilizer. The effects of PVAc on the thermal behavior, morphology, and mechanical properties of 70PHB/30PPC blend were investigated. The results show that the melting point and the crystallization temperature of PHB in blends decrease with the increase of PVAc content in blends, the loss factor changes from two separate peaks of 70PHB/30PPC blend to one peak of 70PHB/30PPC/12PVAc blend. It is also found that adding PVAc into 70PHB/30PPC blend can decrease the size of dispersed phase from morphology analysis. The result of tensile properties shows that PVAc can increase the tensile strength and Young’s modulus of 70PHB/30PPC blend, and both the elongation at break and the tensile toughness increase significantly with PVAc added into 70PHB/30PPC.     

顺丁橡胶／低密度聚乙烯的共混

比较了未交联和动态交联不同组成PB/LDPE共混物的力学性能。共混物的T_g、T_m和T_d不随组成而变化,表明PB和LDPE不具有相容性。但共混物中PE的γ转变向高温方向位移,说明PE非晶部分的分子短链和PB有界面相互作用。形态研究表明,未交联体系中量多的组份形成连续相,动态交联体系在PB/LDPE≤70/30时,PE呈连续相,交联的PB为分散相。     

Rheology, morphology and mechanical properties of polyethylene/ethylene vinyl acetate copolymer (PE/EVA) blends

Rheology, morphology and mechanical properties of binary PE and EVA blends together with their thermal behavior were studied. The results of rheological studies showed that, for given PE and EVA, the interfacial interaction in PE-rich blends is higher than EVA-rich blends, which in turn led to finer and well-distributed morphology in PE-rich blends. Using two different models, the phase inversion composition was predicted to be in 45 and 47 wt% of the PE phase. This was justified by morphological studies, where a clear co-continuous morphology for 50/50 blend was observed. The tensile strength for PE-rich blends showed positive deviation from mixing rule, whereas the 50/50 blend and EVA-rich blends displayed negative deviation. These results were in a good agreement with the results of viscoelastic behavior of the blends. The elongation at break was found to follow the same trend as tensile strength except for 90/10 PE/EVA blend. The latter was explained in terms of the effect of higher co-crystallization in 90/10 composition, which increased the tensile strength and decreased the elongation at break in this composition. The results of thermal behavior of the blends indicated that the melting temperatures of PE and EVA decrease and increase, respectively, due to the dilution effect of EVA on PE and nucleation effect of PE on EVA.     

Evaluation of polyblends of cottonseed protein and polycaprolactone plasticized by cottonseed oil

Recently, there has been an increasing trend toward replacing conventional fossil-based plastics with bioplastics that are eco-friendly and biodegradable. In this work, blends of polycaprolactone (PCL) and cottonseed protein plasticized with cottonseed oil were made and analyzed for their mechanical, adhesive, and thermal properties. The addition of water-washed cottonseed meal (WCSM) to PCL increased the Young’s modulus but decreased the tensile strength and elongation-at-break of PCL. The addition of cottonseed oil to the PCL/WCSM blend kept the tensile strength about the same but enhanced the elongation. The PCL blends with WCSM and cottonseed protein isolate gave about the same mechanical properties, both somewhat better than the PCL/soy protein isolate blend. As plasticizers, cottonseed oil performed slightly better than coconut oil, both better than poly(ethylene glycol). The addition of WCSM and cottonseed oil (up to a PCL:WCSM:plasticizer ratio of 60:40:20) did not change the adhesive performance of PCL on fiberboard. Thus, the combination of PCL/cottonseed protein/cottonseed oil seems to be a viable bioplastic, and one possible application for this material may be in the hot melt adhesive area.     

Mechanical and thermal properties of syndiotactic polystyrene blends with poly(p-phenylene sulfide)

Melt blends of syndiotactic polystyrene (sPS) and poly(p-phenylene sulfide) (PPS) have been prepared by using an internal mixer at 300 °C. The thermal, mechanical and morphological properties of binary blends of sPS with PPS have been investigated in this paper. The thermal and morphological properties show the immiscible binary blend evidences, which have a clear phase separation between the components at all compositions and a lack of adhesion at the interface. According to the X-ray diffraction patterns of blends, the crystalline structure of sPS in the blend is not altered from α form to β form. Indeed, the results for tensile test reveal that there is no synergism of the modulus of elasticity for sPS/PPS blend system.     

HTPB/增塑剂玻璃化转变温度及力学性能的分子动力学模拟

为了预测高分子粘结剂端羟基聚丁二烯(HTPB)与增塑剂癸二酸二辛酯(DOS)、硝化甘油(NG)的相容性及HTPB/增塑剂共混物的玻璃化转变温度(Tg)和力学性能,在COMPASS力场条件下采用分子动力学(MD)模拟方法对相容体系(HTPB-DOS)和不相容体系(HTPB-NG)进行了研究.结果表明,通过比较溶度参数差值(Δδ)的大小可以预测HTPB与增塑剂的相容性,即HTPB与DOS属于相容体系,而HTPB与NG不相容.通过温度-比容曲线可以得到HTPB、HTPB/DOS与HTPB/NG的Tg分别为197.54,176.30和200.03K.力学性能分析结果表明,添加DOS增塑剂后使HTPB的弹性模量(E),体积模量(K)和剪切模量(G)下降,材料刚性减弱,柔性增强,力学性能得到改善.本模拟方法可以作为预测聚合物/增塑剂共混物性能的有利工具,也可以为固体推进剂和高聚物粘结炸药的配方设计提供理论指导.     

间规聚苯乙烯/等规聚丙烯/间规聚苯乙烯-b-聚(1-丁烯)共混体系相容性

间规聚苯乙烯(sPS)的改性主要是对其增韧改性,提高其力学性能.sPS的化学改性已有较多文献报道[1,2].     

Polymer toughening using residue of recycled windshields: PVB film as impact modifier

In this work, poly(vinyl butyral) (PVB) film originated from the mechanical separation of windshields was tested as an impact modifier of Polyamide-6 (PA-6). The changes undergone by PVB film during the recycling process and the blend manufacturing were evaluated by thermal analyses, infrared spectroscopy and loss on ignition. Blends of PA-6/original PVB film and PA-6/recovered PVB film were obtained in concentrations ranging from 90/10 to 60/40. The mechanical properties of the blends were investigated and explained in light of the blends morphologies, which in turns were correlated to the changes undergone by the PVB film during the recycling process. The original film presented a plasticizer content of 33 wt.%, which decreased to as low as 20 wt.% after the recycling and blend preparation processes. The PA-6/PVB film blends presented lower values of tensile strength and Young’s modulus than Polyamide-6, but all blends presented a dramatic increase in their toughness, with a special feature for the 40 wt.% blend, which resulted in a super toughened material (impact strength exceeding 500 J/m). Similar results were obtained with recovered PVB film and super tough blends were also obtained. The use of recovered PVB resulted in a smaller improvement of the impact strength due to the loss of plasticizer undergone during the recycling process. The morphological observations showed that if the interparticle distance is smaller than around 0.2 μm (critical value), the notched Izod impact strength values increase considerably and the fracture surface of blends exhibit characteristics of tough failure.     

Poly(lactic acid)/poly(butylene succinate)/calcium sulfate whiskers biodegradable blends prepared by vane extruder: Analysis of mechanical properties,morphology, and crystallization behavior

Ternary blends of PLA/PBS/CSW with different weight fractions were prepared using a vane extruder. The mechanical properties, morphology, crystallization behavior and thermal stability of the blends were investigated. For the PLA/CSW blend, the tensile strength decreased, the flexural strength and modulus increased compared with pure PLA. For PBS, the addition of CSW had little influence on the mechanical properties. For the ternary blends PLA/PBS/CSW, the tensile strength, flexural strength and modulus decreased compared with pure PLA, while the elongation at break and the impact strength increased significantly. The brittle-ductile transition of the blends took place when the PBS weight fraction reaching 30 wt%. As a soft component in the blends, PBS was beneficial to improve the tensile ductility and the toughness of PLA. SEM measurements reveal that PLA/PBS/CSW blends were immiscible. When the weight fraction of PBS was 50 wt%, significant phase separation was observed, and CSW had preferential location in the PBS phase of the blend. DSC measurement and POM observation reveal that CSW had a heterogeneous nucleation effect on PLA and PBS matrix. The addition of PBS improved the crystallization of PLA and the thermal resistance of the PLA/PBS/CSW blends significantly.     

Properties of immiscible and ethylene-butyl acrylate-glycidyl methacrylate terpolymer compatibilized poly (lactic acid) and polypropylene blends

Poly(lactic acid) (PLA) and polypropylene (PP) blends of various proportions were prepared by melt-compounding. The miscibility, phase morphology, thermal behavior, and mechanical and rheological properties of the blends were investigated. The blends were immiscible systems with two typical morphologies, spherical droplet and co-continuous, and could be obtained at various compositions. Complex viscosity, storage modulus and loss modulus depend on the PP content. Thermal degradation of all blends led to two weight losses, for PLA and PP. The incorporation of PP improved the thermal stability of the blend. The effect of compatibilizer (ethylene-butyl acrylate-glycidyl methacrylate terpolymer, EBA-GMA) on the morphology and mechanical properties of 70/30 w/w PLA/PP blends was investigated. The tensile strength of these blends reached a maximum for 2.5 wt% EBA-GMA, and impact strength increased with increasing EBA-GMA content, suggesting that EBA-GMA is an effective compatibilizer for PLA/PP blends.     

Analyse de la relations structure-proprietes des melanges PVC-PMMA

Analysis of Structure-Properties Relationship of PVC-PMMA Blends. This paper presents a study of the structure-properties relationship of PVC-PMMA blends. For that purpose, blends of variable compositions from 0 to 100 wt % were prepared. Their physico-chemical characterization was carried out by differential scanning calorimetric analysis (DSC) and Fourier Transform Infrared spectroscopy (FTIR). The analysis of thermograms showed polymer miscibility up to 60 wt % PMMA. This miscibility is due to a specific interaction of hydrogen bonding type between carbonyl groups (C+O) of PMMA and hydrogen from (CHCl) groups of PVC. The two-band deconvolution showed an increase in associated groups percentage in the domain of miscibility. The variation of mechanical properties such as tensile behaviour, hardness and impact resistance was investigated for all blend compositions. The effect of a plasticizer on the same properties was considered. The obtained results show that a range of properties can be generated according to the blend compositions.     

Thermoplastic elastomer based on epoxidized natural rubber/thermoplastic polyurethane blends: influence of blending technique

Epoxidized natural rubber (ENR) and thermoplastic polyurethane (TPU) blends were prepared by simple blend and dynamic vulcanization. The main objective was to prepare a low‐hardness TPU material with good damping and elastic and mechanical properties. It was found that the incorporation of ENR into the blend shows a reduction in Young's modulus, hardness (i.e. <70 Shore A), damping properties (i.e. tan δ < 0.3), and tension set (i.e. <20%) compared with the pure TPU. This indicates the formation of softer TPU materials with superior damping and elastomeric properties. However, incorporation of ENR sacrificed mechanical properties in terms of tensile strength and elongation at break, but these still remain in the range of applicability for industrial uses. It was also found that dynamic vulcanization caused enhancement of mechanical properties, relaxation, damping, rheological properties, and elasticity of the blends. Temperature scanning stress relaxation measurements revealed an improvement in stress relaxation properties and thermal resistance of the dynamically cured ENR/TPU blend. Copyright © 2011 John Wiley & Sons, Ltd.