Synthesis of polychlorinated 2,5-dihydro-2-furanones from maleic anhydride

The reaction of maleic anhydride with phosphorus pentachloride, which leads to polychlorinated 2,5-dihydro-2-furanones, was studied. The structures of the compounds obtained were proved by means of spectral methods.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 5, pp. 600–601, May, 1991.     

Structure of poly(maleic anhydride)

The bulk polymerization of maleic anhydride initiated with acylperoxides, di-tert-butyl peroxide, AIBN, or pyridine proceeds with evolution of CO₂. The amount of CO₂ generated depends on the nature and the concentration of the initiator. With peroxide initiators, less than 5% of the polymerized maleic anhydride is decarboxylated. ¹H-NMR spectra, obtained on the benzoyl peroxide-initiated polymer and its methyl ester, are consistent with the unrearranged poly(maleic anhydride) structure and rule out the polycyclopentanone structure proposed by Braun and co-workers. Base-initiated polymaleic anhydride is substantially decarboxylated, and the resulting polymer has anhydride and carboxyl groups. Elemental analyses and ¹H-NMR spectra obtained on the pyridine-initiated polymer and its methyl ester refute both the cis-poly(vinylene ketoanhydride) structure suggested by Schopov and the polycylopentanone structure proposed by Braun and co-workers.     

Synthesis and characterization of poly(d,l-lactide-co-glycolide) modified by maleic anhydride and 1,4-butanediamine

Bone tissue engineering is sought to apply strategies for bone defects healing biodegradable porous scaffolds without limitations and shortcomings. In this work, we have developed a novel maleic anhydride (MAH) and 1,4-butanediamine modified poly(lactide-co-glycolide) polymer (BMPLGA). The synthesized polymer was characterized by Fourier transform infrared spectrometry (FTIR), Nuclear magnetic resonance spectra (¹H NMR), gel permeation chromatography (GPC) and contact angle measurements. In addition, cell morphologies in the extracts and cell cytotoxity were also studied. The results showed that the BMPLGA was successfully obtained by introducing MAH and 1,4-butanediamine into PLGA in bulk. The introduction of anhydride and amino groups improved the hydrophilicity of PLGA. Fibroblastic cells showed normal morphologies in BMPLGA extracts, and the BMPLGA materials showed no cell cytotoxicity. The synthetic BMPLGA material may have potentials for biomedical applications due to improving hydrophilicity.     

Glass bead grafting with poly(carboxylic acid) polymers and maleic anhydride copolymers

Glass beads were etched with acids and bases to increase the surface porosity and the number of silanol groups that could be used for grafting materials to the surfaces. The pretreated glass beads were functionalized using 3‐aminopropyltriethoxysilane (APS) coupling agent and then further chemically modified by reacting the carboxyl groups of carboxylic acid polymers with the amino groups of the pregrafted APS. Several carboxylic acid polymers and poly(maleic anhydride) copolymers, such as poly(acrylic acid) (PAA), poly(methacrylic acid) (PMA), poly(styrene‐alt‐maleic anhydride) (PSMA), and poly(ethylene‐alt‐maleic anhydride) (PEMA) were grafted onto the bead surface. The chemical modifications were investigated and characterized by FT‐IR spectroscopy, particle size analysis, and tensiometry for contact angle and porosity changes. The amount of APS and the different polymer grafted on the surface was determined from thermal gravimetric analysis and elemental analysis data. Spectroscopic studies and elemental analysis data showed that carboxylic acid polymers and maleic anhydride copolymers were chemically attached to the glass bead surface. The improved surface properties of surface modified glass beads were determined by measuring water and hexane penetration rates and contact angle. Contact angles increased and porosity decreased as the molecular weights of the polymer increased. The contact angles increased with the hydrophobicity of the attached polymer. The surface morphology was examined by scanning electron microscopy (SEM) and showed an increase in roughness for etched glass beads. Copyright © 2007 John Wiley & Sons, Ltd.     

The synthesis of poly(3,4-dihydroxystyrene) and poly[(sodium 4-styrenesulfonate)-co-(3,4-dihydroxystyrene)]

Poly(2-methoxy-4-vinylphenol), polyMVP, and poly[(sodium 4-styrenesulfonate)-co-(2-methoxy-4-vinylphenol)], poly(SSS/MVP), were synthesized by radical polymerization using Vazo-64 or tributylborane as initiator. Poly(3,4-dihydroxystyrene) and poly[(sodium 4-styrenesulfonate)-co-(3,4-dihydroxystyrene)] were obtained by demethylation of polyMVP and poly(SSS/MVP) using HBr and trimethylsilyl iodide, respectively. (Co)polymer structures were confirmed by ¹H and ¹³C NMR spectra. About 30 wt.-% gel formed in the polyMVP polymerizations, whereas only a small amount (0.5 mol-%) of gel formed in the copolymerizations.     

Synthesis and characterization of poly(styrene‐maleic anhydride)‐montmorillonite nanocomposite

Poly(styrene‐maleic anhydride)‐montmorillonite nanocomposites were prepared by intercalation of layered montmorillonite with the polymer ions. Synthetic approaches including polymerization and phosphonium salt formation have been used for polymer intercalation and dispersion of the host layers in the polymer matrix. The ratio of the mineral in the composites ranged 30–50%. Wide‐angle X‐ray diffraction (WAXD) disclosed that the d₍₀₀₁₎ spacing between the internal lamellar surface were only expanding to about 13 and 15 Å according to the type of phosphonium salt suggesting packing of polymer molecules between the layers. Examination of these materials by scanning and transmission electron microscopy showed spherical nano size particles of average diameter, 350 nm. Copyright © 2002 John Wiley & Sons, Ltd.     

Synthesis and characterization of poly[(methylsilylene ethynylenephenyleneethynylene)-co-(dimethylsilylene ethynylenephenyleneethynylene)]s

<正>A series of poly[(methylsilylene ethynylenephenyleneethynylene)-co-(dimethylsilylene ethynylenephenyleneethynylene)]s were synthesized by the incorporation of various ratios of methylsilylene to dimethylsilylene units into the polymer chain backbone.The resultant copolymers were soluble in a variety of common organic solvents at room temperature.The copolymers were characterized by FT-IR,~1H-NMR,GPC,rheological analysis,differential scanning calorimetry(DSC) and thermogravimetric analysis(TGA).The results showed that the copolymers exhibited good processability and cured at low temperatures like 200℃.The curing reactions involved in hydrosilylation of Si—H and alkyne groups and the polymerization of alkynes.Y_(d5)(5%weight loss) of the cured copolymers ranged from 629℃to 686℃,and the decomposition residues of cured copolymers at 1000℃ranged from 88.1%to 90.9%under nitrogen.Thermal stability of the copolymers increased with the introduction of methylsilylene units into polymer chains.The cured copolymers were sintered at 1450℃,and the results of X-ray diffraction analysis showed that β-SiC was formed in the sintered products.     

Synthesis and characterization of imidized poly(styrene‐maleic anhydride) nanoparticles in stable aqueous dispersion

Organic nanoparticles are synthesized by partial imidization of high‐molecular weight styrene(maleic‐anhydride) with 26 to 34 mol% maleic anhydride, in aqueous environment and presence of ammonium hydroxide. The nanoparticle dispersions have a maximum solid content of 35 wt% and good stability that critically depends on the ratio of imidized and ammonolyzed maleic anhydride moieties. The deprotonated residual maleic anhydride moieties provide dispersion stability at pH > 4, while protonation at pH < 4 causes nanoparticle sedimentation. After presentation of the synthesis conditions, the imidization reaction is characterized by FT‐IR and Raman spectroscopy, followed by thermal analysis (TGA, DSC), and morphological characterization (DLS, SEM, TEM, AFM). The reaction conditions were optimized by physical characterization of various dispersions, and finally nanoparticles could be obtained with a maximum degree of imidization of 77% in dispersed conditions, or 90 to 95% after drying that are favorable for coating applications. Copyright © 2010 John Wiley & Sons, Ltd.     

Thermal characterization of the interaction of poly(3-hydroxybutyrate) with maleic anhydride

In this research, the effects of Al–5Ti–1B grain refiner and Al–10Sr modifier were studied on solidification characteristics and microstructural features of 319 aluminum alloy. Important solidification events such as recalescence and nucleation undercooling temperature and aluminum–silicon eutectic depression temperature have been evaluated using cooling curve and its first derivative curve obtained from thermal analysis of a sample. The aim of this article is to show the ability of the thermal analysis technique to predict some key parameters controlling solidification and casting process. It has been found that the thermal analysis is the identified method for a rapid on-line monitoring of metallurgical characteristics of aluminum alloy melts without conventional metallographic examination.     

Synthesis and characterization of perfluorohexylated poly(3,4-ethylenedioxythiophene)

The perfluorohexylated 3,4-ethylenedioxythiophene 5 was prepared via Mitsunobu reaction of perfluorohexylatyed diol 2 with diethyl 3,4-dihydroxythiophenedicarboxylate followed by decarboxylation. The polymerization of 5 was conducted with both oxidative chemical and electrochemical polymerizations. The polymers were characterized by cyclic voltammogram, UV, IR, TGA and DSC.     

Synthesis,characterization, and degradation behaviors of poly(D,L-lactide-co-glycolide) modified by maleic anhydride and ethanediamine

In order to improve hydrophilicity and settle the acidity in hydrolysis, a novel ethanediamine (EDA) and maleic anhydride (MAH) modified poly(D,L-lactide-co-glycolide) (PLGA) polymer (EMPLGA) was synthesized. Fourier Transform Infrared Spectrometer (FTIR), Gel Permeation Chromatography (GPC), Nuclear Magnetic Resonance (1HNMR), titration and the water contact angles were employed to characterize the synthesized polymer. The effects of various polymerization conditions on weight average molecular mass (Mw), polydispersity index (PDI) and anhydride content of MPLGA were investigated. The degradation behaviors of PLGA, MPLA and EMPLGA were also studied by observation of the changes of the pH value of incubation medium, molecular weight and weight loss ratio for a time interval of 25 days in-vitro, respectively. The results showed that MPLGA with high anhydride content was successfully obtained by directly ring-opening polymerization and ethanediamine was further grafted onto MPLGA, and there is almost unchanged in Mw between MPLGA and EMPLGA polymers. The introduction of anhydride and amino groups improved the hydrophilicity of PLGA. A uniform degradation of EMPLGA was observed in comparison with an acidity-induced auto-accelerating degradation featured by PLGA and MPLGA. The results revealed that the introduction of ethanediamine into PLGA has weakened or neutralized the acidity of PLGA degradation products.     

Grafting in reaction of polyethylene and poly(maleic anhydride)

Polyethylene has been grafted in a reaction with poly(maleic anhydride) in the presence of radical initiators. The role of oxygen, the comparison of the effectiveness of benzoyl peroxide and AIBN, and the kinetics of the reaction suggest that side chains are formed via a combination of the macroradicals of both polymers.     

Synthesis and characterization of poly(vinylcyclohexane) derivatives

Six nearly monodisperse substituted poly(styrene) homopolymers, poly(styrene) (PS), poly(2-methylstyrene) (P2MS), poly(3-methylstyrene) (P3MS), poly(4-methylstyrene) (P4MS), poly(tertiary-butylstyrene) (PtBS), and poly(α-methylstyrene) (FαMS) were anionically polymerized and subsequently saturated using heterogeneous hydrogenation techniques to poly(vinylcyclohexane) (PVCH), poly(2-methylvinylcyclohexane) (P2MVCH), poly(3-methylvinylcyclohexane) (P3MVCH), poly(4-methylvinylcyclohexane) (P4MVCH), and poly(tertiary-butylvinylcyclohexane) (PtBVCH), respectively. In each case, except PαMS, the materials were saturated to > 99% conversion with no chain degradation. PS hydrogenations required the addition of small amounts of tetrahydrofuran to the reaction solvent cyclohexane to enhance miscibility and eliminate large-scale chain degradation. Density gradient and differential scanning calorimetry (DSC) measurements were used to characterize the density and glass transition temperature, T_g, of the unsaturated and saturated polymers. Saturation reduces the density by 3% to 11% and changes T_g substantially. The greatest variation in T_g is obtained with the 3-methyl substituted species where a 63°C increase is observed, while the highest measured T_g is 186°C for P2MVCH. Small-angle neutron scattering (SANS) experiments on binary mixtures of hydrogenous and deuterium labeled PVCH derivatives provided a determination of bulk chain statistics. The statistical segment length is relatively insensitive to vinylcyclohexane ring substitution, except with P3MVCH where a 20% greater value is obtained. ©1995 John Wiley & Sons, Inc.     

Preparation and characterization of porous titania-grafted poly(styrene-divinylbenzene)/maleic anhydride nanocomposite microspheres

Mesoporous titania-grafted poly(styrene-divinylbenzene)/maleic anhydride [P(St-DVB)/MA] nanocomposite microspheres were prepared by an open ring reaction method.The titania nanoparticles were first modified by attachment of amino groups to their surface to prevent particle aggregation,and to allow the nanoparticles to covalently bond the polymer microspheres,the surface of which was modified by attachment of MA functional groups to enable the polymer to retain their porous structures and to react with the a...