含1,3,4-噁二唑甲壳型液晶聚合物的合成与表征

甲壳型液晶聚合物（mesogen-jacketed liquid crystal polymer,MJLCP）是1987年由周其凤教授[1]首先提出的概念.从化学结构看,甲壳型液晶聚合物属于侧链型,由烯类单体经链式聚合制得,容易得到高分子量的产物,具有一般柔性侧链型液晶聚合物的一些优点.但是与柔性侧链型液晶聚合物不同的是,MJLCP分子中的刚性液晶基元是通过腰部或重心位置与主链相联结的,在主链与刚性液晶基元的侧基之间只有很短或者没有柔性间隔基.由于在这类液晶聚合物的分子主链周围空间内刚性液晶基元的密度很高,分子主链被由液晶基元形成的外壳所包裹并被迫采取相对伸直的刚性链构象.因此,这类液晶聚合物又和主链型刚性链液晶聚合物相似,具有较明显的链刚性.近年来,周其凤课题组围绕甲壳型液晶聚合物深入开展了分子设计与合成、分子结构与性能等多方面的研究.其中,设计合成具有特定功能的甲壳型液晶聚合物是在以往研究工作和学科交叉融合的基础上发展起来的一项新的研究工作.将一些有特殊功能的基团引入到甲壳型液晶聚合物中会使其具有崭新的特性.     

偶氮苯为探针的液晶聚合物聚集形态研究

利用紫外-可见光谱,对比研究了尾挂侧链液晶聚合物和腰挂侧链液晶聚合物在结晶相和液晶相转变过程中的液晶基元取向情况.研究表明,石英基材表面倾向于诱导偶氮液晶基元垂直于基材排列;观察到了在液晶态尾挂侧链液晶聚合物和腰挂侧链液晶聚合物的不同取向行为.在室温下重新结晶数天后,腰挂液晶聚合物的紫外可见光谱缓慢回复.     

一种侧链液晶高分子的合成与表征

合成了一种主链为甲基丙烯酸酯 ,侧链是三个苯环以酯键相连的介晶基元 ,柔性间隔段为两个亚甲基的新的侧链液晶高分子 .聚合物和单体的化学结构、液晶相转变和液晶态织构采用红外光谱、核磁共振、偏光显微镜、差热分析和广角X光衍射进行了表征 .研究表明 ,单体呈现近晶相和向列相两个液晶相 ,聚合物在很宽的温度范围内呈向列相 .该单体和聚合物在一定条件下可形成固化诱导条带织构     

一类新的刚性链侧链型液晶高分子的合成

以自由基聚合方法，合成了一系列含有三个苯环通过酯键相联的液晶性单体及其聚合物．在这类新的液晶高分子中，刚性液晶基元不通过柔性间隔基而直接竖挂在聚甲基丙烯酸酯大分子主链上．这些高分子有很高的玻璃化转变温度，表明其分子链刚性较大，因而代表了一类新的刚性链侧链型液晶高分子．它们的液晶行为用ＤＳＣ、偏光显微镜和Ｘ－光衍射进行了表征．发现所有单体和聚合物均为向列型热致性液晶．     

苯并菲盘状侧链液晶聚合物的大分子工程

盘状液晶聚合物兼具盘状液晶的光电性能和聚合物的柔韧性以及优异的成膜加工性能,有望发展成为新一代先进有机聚合物柔性光电功能材料.本文介绍苯并菲盘状侧链液晶聚合物的研究进展,主要结合我们研究组的工作,重点评述采用受控/活性自由基聚合方法可控合成这类侧链液晶聚合物以及对分子量效应和间隔基长度影响等基本问题的阐明.我们采用可逆加成-断裂链转移(RAFT)聚合第一次成功实现了分子量窄分布的苯并菲聚丙烯酸酯侧链盘状液晶聚合物的可控制备.首先提出盘单元局部簇集的分立短柱堆积(DCS)模型,合理解释了聚合度20左右出现的显著分子量效应,尤其揭示并提出了盘状侧链液晶聚合物的正耦合效应(PCE)理论,即短间隔基的较强耦合作用更有利于其有序柱状相的形成,与棒状侧链液晶聚合物经典的柔性长间隔基去耦合理论形成鲜明对照,补充了缺失的理论短板.基于这些原则,我们设计合成的丁氧基苯并菲聚丙烯酸酯侧链盘状液晶聚合物,经飞行时间谱(TOF)测试,表现出比文献报道值高1~2个数量级的载流子迁移率.进一步在手性客体分子掺杂诱导组装形成单手性螺旋结构聚合物复合物,以及拓扑受限环状聚合物和嵌段共聚物的受控制备等方面开展了比较系统的大分子工程实践.盘状侧链液晶聚合物的可控制备及其显著不同于棒状液晶聚合物体系的一些基本特征的阐明,为这类重要有机聚合物半导体材料的理性设计与可控合成提供理论指导,也为加速推进其光电器件化应用奠定基础.     

主链具有X-型液晶基元的液晶高分子系列的合成与研究

以低温溶液缩聚方法,合成了一系列主链上具有X-型液晶基元的液晶高分子。所有聚合物样品均具有明显的热致液晶性。不同柔性链段长度和取代基对聚合物的液晶性呈规律性的影响。并用IR、H-NMR、WAXD和热台偏光显微镜等方法对聚合物进行了表征。     

侧基甲壳效应和甲壳型液晶高分子

侧链液晶高分子体系里,液晶基元可以通过尾接或腰接的方式与主链相连.一般认为,在液晶基元与主链间插入一段长度合适的＂柔性间隔基＂可有效实现主、侧链间的动力学去偶合,从而有利于侧基液晶基元之间的有序排列.作为一类特殊的腰接型侧链液晶高分子,甲壳型液晶高分子中体积较大的侧基（如棒状液晶基元）通过非常短的间隔基或仅通过一个碳-碳键直接横挂至主链上,这导致了强烈的甲壳效应,使得主链被迫伸展.因此,可从与＂柔性间隔基＂完全不同的角度出发,充分利用主链和侧基间的偶合作用,设计甲壳型液晶高分子.本文综述了腰接型侧链液晶高分子中的侧基甲壳效应、甲壳型液晶高分子中由主链与侧基相互作用所导致的特殊构象以及液晶相结构.研究表明,侧基甲壳效应在调控甲壳型液晶高分子的形状、尺寸以及螺旋结构等方面有重要作用.甲壳型液晶高分子可作为刚-柔嵌段共聚物的刚性链段,也可作为主/侧链结合型液晶高分子的主链部分参与到多层次分级超分子有序结构的构筑之中.     

新型侧链液晶聚甲基丙烯酸酯研究

以横向取代的液晶基元为侧基合成了聚甲基丙烯酸酯,并对此聚合物进行初步表征.在玻璃化温度(170℃)以上样品进入液晶态.样品较高的玻璃化温度以及能形成液晶态的特性被认为是棒状液晶基元使聚合物分子链刚性化的结果.     

用环氧乙烷低聚物为柔性间隔的手性侧链液晶高分子的合成

本文用乙氧基做为主链与侧链的柔性间隔，合成了手性侧链液晶高分子．通过ＤＳＣ，热台偏光显微镜及Ｘ－衍射等手段，研究了柔性间隔链长对液晶行为的影响．结果表明，这类液晶高分子有较宽的相变温度范围．聚合物的相变温度及液晶态的形成与柔性间隔链长有关．     

3，5—二氨基苯甲酸—4′—联苯酯含液晶侧链的聚酰亚胺的合成与表征

合成了含液晶基元侧基的二氨基化合物－3,5－二氨基苯甲酸－4′－联苯酯,并以3,3′-4,4′－二苯醚四羧酸二酐（ODPA）、二氨基二本醚（ODA）为共聚单体,制备了具仍液晶侧链原位复合自增强功能的新型聚酰亚胺（PI）薄膜材料,这种含液晶基元侧链的PI能溶 在极性非质子有机溶剂中,显示出良好的可加工性能,由于液晶基元侧链的原位复合自增强作用,该类膜材料显示出良好的力学性能和热稳定性在热台偏光显微镜下观察,该类聚合物在较高的温度区域内显示液晶行为,并呈现向相织构。     

一种新型侧链液晶聚合物的喇曼光谱研究

The Raman scattering on a novel liquid crystal side chain polymer, poly-2,5-bis (p-meth-oxybenzoyloxy) styrene, has been performed. We observed that the characteristic Raman sp-ctra of the vinyl group in the monomer changed much deeply in the polymer, especially for the Raman line correponding to the C=C of the vinyl group which disappeared completly in the polymer. Contrast with that, the Raman spetra of the rest group did not present any substantial difference between the monomer and the polymer. These experimental facts show-ed that the vinyl group of the monomer was tranfered to the polymeric backbone while the chemical structure of the mesogenic unit in the monomer remained after the polymerization,and also conformed that it was successful in the synthesis of a liquid crystal side chain plymer without a flexible spacer between the mesomorphic unit and the molecular main chain.     

聚硅氧烷侧链液晶高分子的合成与表征

研究以对－烯丙氧基苯甲酸对－氰基苯酚酯为单体的聚硅氧烷侧链液晶高分子的合成方法。首先利用Williamson反应生成醚、羧酸酰化、酯化反应得到单体,然后利用硅氢化反应将单体接枝到聚甲基氢硅氧烷上得到目标产物。用IR,NMR及热台偏光显微镜等方法对单体和聚合物进行了结构表征和液晶行为分析。优化了对－烯丙氧基苯甲酸对－氰基苯酯为单体的聚硅氧烷侧链液晶高分子的合成工艺条件,提高了产率。样品表征结果证明单体和聚合物均呈现近晶液晶相,为特殊功能材料提供了原料。     

γ-Ray-induced copolymerization of ethylene and vinyl chloride in liquid carbon dioxide

The γ-ray-induced copolymerization of ethylene and vinyl chloride with the use of liquid carbon dioxide as a solvent was studied under a total pressure of 400 kg/cm², with a dose rate of 2.5 × 10⁴ rad/hr at 30°C. A rubberlike, sticky polymer is obtained when the molar concentration of vinyl chloride is less than 30% in the monomer mixture, and the polymer is a white powder at higher concentrations of vinyl chloride. Infrared, x-ray, and differential thermal analyses confirm that the polymerization products are noncrystalline, true random copolymers. The rate of copolymerization decreases markedly when a small amount of vinyl chloride is added to ethylene monomer. In the range of vinyl chloride concentration higher than 5%, however, the rate and the molecular weight of copolymer increase with increasing concentration of vinyl chloride. It has been concluded from kinetic considerations based on these results that the rate of initiation increases proportionally with the concentration of vinyl chloride. Further, the growing chain radicals are shown to be deactivated by the cross-termination reaction between the radicals with terminal unit of ethylene and vinyl chloride, and no transfer reaction occurs.     

Quasi “Tacticity” of Rigidly Alternating Copolymers of Isobutyl Vinyl Ether and Maleic Anhydride

Since the copolymers of maleic anhydride, a cyclic monomer, and vinyl ethers, such as isobutyl vinyl ether, are made of rigidly alternating monomer unit sequences, quasi "isotactic" and quasi "syndiotactic" configurations for the monomer unit diads and triads are proposed considering the relative orientation of the cyclic anhydride group and the ether side chain with respect to the copolymer backbone.     

RADIATION INDUCED SOLID-STATE POLYMERIZATION OF ACETYLENEDICARBOXYLIC ACID

ABSTRACT

Radiation induced solid-state polymerization of acetylenedicarboxylic acid was carried out at room temperature in open atmosphere and under vacuum conditions. The gray colored powder polymer obtained was insoluble in most common solvents but only partially soluble in DMSO and THF. The limiting conversion to polymer was about 5%. The polymer was characterized by IR, UV, DP-MS, DSC, TGA, and XRD. The mechanism of polymerization was elucidated from the available data. Polymerization followed a free radical mechanism. However, before the addition of monomer molecules to the growing chain, at least one of the carboxylic groups of the monomer breaks away as CO or CO₂. The formation of side group cyclization takes place. At least one of the bonds in the side cyclic group is an etheric bond. The DSC, TGA, and XRD results showed that the polymer was partially crystalline and showed no melting up to 1200°C. The mechanism of polymerization and assigned chain structure was studied by the direct pyrolysis mass spectrometric method.

The crystal structure of monomer and polymer was investigated by the XRD method. Both monomer and crystalline polymer were monoclinic with similar cell parameters. Thus, the polymerization follows a topotactic mechanism. The unpolymerized monomer retains its crystal structure and, therefore, CO or CO₂ in the monomer molecule has to be eliminated before polymerization could take place.     

Long branching in poly(vinyl acetate) and poly(vinyl alcohol). II. Polymerization of vinyl acetate in the presence of crosslinked poly(vinyl alcohol)

It is a common view that poly(vinyl acetate) has many branches at the acetyl side group, but that the corresponding poly(vinyl alcohol) has little branching. In order to study the branching in poly(vinyl acetate) and poly(vinyl alcohol) which is formed by chain transfer to polymer, the polymerization of ¹⁴C-labeled vinyl acetate in the presence of crosslinked poly(vinyl acetate), which was able to be decrosslinked to give soluble polymers, was investigated at 60°C and 0°C. This system made it possible to separate as well as to distinguish the graft polymer from the newly polymerized homopolymer. Furthermore, the degree of grafting onto the acetoxymethyl group and onto the main chain were estimated. It became clear that, in the polymerization of vinyl acetate, chain transfer to the polymer main chain takes place about 2.4 times as frequently at 60°C as that to the acetoxy group and about 4.8 times as frequently at 0°C.     

手性化合物环境下制备甲壳型液晶高分子

甲壳型液晶高分子的研究是我国独创[1 ,2 ] ,已产生了积极的科学影响 .虽然它们在化学结构上属于侧链型 ,但在分子形态上更接近于主链型液晶高分子[3] .由于庞大的液晶基元对空间的要求 ,液晶高分子主链被迫采取尽可能伸展的构象[4,5] .然而 ,至今尚不清楚主链与液晶基元之间是怎样协同作用以形成有序结构 .本文探索了在不同手性化合物环境下制备单手螺旋链甲壳型液晶高分子的可能性 .尽管最后并未获得螺旋链高分子 ,但仍取得了一些有价值的结果 .手性化合物环境分别是 ( )薄荷醇 ( 1 )作为反应溶剂、( )过氧化 二 (碳酸薄荷醇酯 ( 2 )作…     

A facile synthetic strategy for hyperbranched polymer via combining free radical telomerization and polycondensation

A facile strategy combining free radical telomerization and polycondensation to prepare hyperbranched polymers was developed. By selecting a suitable telogen and a vinyl monomer, the product obtained by telomerization could be regarded as an AB_n type monomer for preparing a hyperbranched polymer via conventional polycondensation. The principles for selecting vinyl monomers and telogens were proposed. The feed ratio of vinyl monomer to telogen was discussed in the theory. For demonstrating the strategy, methyl (meth)acrylate (MA or MMA) and 2‐mercaptoethanol were used as a vinyl monomer and a telogen, respectively. The two‐unit adduct of MA or MMA obtained after purifying was regarded as a model ABB′ monomer. The sequential transesterification demonstrated that the carboxylate group at the terminal unit has higher reactivity than that at penultimate unit because of the different substituents at the respective α‐positions, resulting in lower degree of branching (DB) of obtained polymer. As substitutes, 2‐hydroxyethyl (meth)acrylate and thioglycolic acid were used as a vinyl monomer and a telogen, respectively. The results showed that the hyperbranched polymer obtained by using pseudo one‐pot approach had moderate DB. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7543–7555, 2008     

Ferroelectric liquid crystalline polymers based on mesogens with halogen-containing terminal groups

A new series of halogen-containing side chain ferroelectric liquid crystal polymers was synthesized. Mesophases were characterized by differential scanning calorimetry, polarizing optical microscopy, X-ray diffraction and molecular simulation. The behaviour of the liquid crystalline phase was investigated with variation of chiral centres, spacer units and grafted ratios. It was found that the thermal stability and temperature range of the chiral smectic C phase decreased with increasing length of the oligo-oxyethylene spacer, and decreasing mesogenic group content. The bulky substituent attached to the chiral centre reduces molecular packing in smectic liquid crystal phases, which disturbs the orientation of the side chain liquid crystal polymer. Furthermore, the influence of molecular structure on electrooptical properties of FLCPs has been studied by broad band dielectric spectroscopy (from 0.1 to 1 ×10 6 Hz).