In situ GISAXS investigation of gold sputtering onto a polymer template

Microphase-separation structures in mixed diblock-triblock copolymer thin films are used for the incorporation of gold atoms inside the polymer matrix via sputtering of gold. Polystyrene (PS) spheres are arranged in a liquidlike type with a well defined nearest neighbor distance inside a polyisoprene matrix acting as a template for directing the gold atoms. Sputtering conditions are selected with a very low sputtering rate to avoid clustering in the atmosphere so that gold reaches the polymer surface in its atomic state. Due to the mobility of the gold atoms and the selective interaction with the PS parts of the microphase separation structure, gold is accumulated inside the polymer film in the PS spheres, as probed in situ with grazing incidence small-angle X-ray scattering (GISAXS). Nominally 4.3 A of gold is deposited, which by diffusion is spread out vertically over a thickness of 280 nm. UV-vis spectroscopy reveals a small blue shift for the gold sputtered polymer film. Atomic force microscopy proves the absence of gold clusters on the film surface. For low sputtering rate, GISAXS proves good sensitivity for gold migration inside the polymer film and opens new possibilities for studying polymer-metal interaction.     

Effects of polymer micelles of alkylated polyethylenimines on generation of gold nanoparticles

Mono- and di-alkylated polyethylenimines (PEI-1R, PEI-2R) were synthesized and used as both reductants, by exploiting the functionality of the polyethylenimine's (PEI) amino groups, and stabilizers able to protect nascent gold nanoparticles generated from hydrogen tetrachloroaurate (HAuCl4). From TEM images of the stained polymers, it is clear that the polymer micelles are round and well-structured when formed from PEI-2R, fused and less well-structured when formed from PEI-1R, and totally nonstructured when formed from PEI. These findings coincide with the results found by using pyrene as a probe to investigate aggregation behavior, where PEI-2R with a fluorescence intensity ratio (I1/I3) of 1.48 forms the more closely packed polymer micelles than PEI-1R (I1/I3 = 1.64) and PEI (I1/I3 = 1.72). The use of the highly alkylated polymer micelle (PEI-2R) results in the fastest reduction of HAuCl4, and gives the most effective protection to the generated gold nanoparticles. When used at higher polymer concentrations than required for micelle formation, it was found that polymer hydrophobicity was highly influential in directing the nanoparticle's morphology, i.e., the resulting polymer micelles were labeled with perfect and round necklace-like gold nanoparticles when PEI-2R was used, and imperfect and less round gold nanoparticles when PEI-1R was employed. These structures were totally absent when PEI was used. The use of alkylated PEI, being able to act simultaneously as both a reductant and as a very effective protective agent, greatly simplifies the process used for preparing gold nanoparticles.     

Self-assembled DNA-conjugated polymer for novel DNA chip.

We developed DNA-conjugated polymer for DNA chip fabrication. A 30 mer probe DNA and disulfide bridges were covalently attached to the polymer side chain. The DNA-conjugated polymer can be specifically adsorbed on a gold substrate surface by a self-assembly technique. The interaction between fully matched DNA and DNA-conjugated polymer was investigated by surface plasmon resonance (SPR) technique. The DNA-conjugated polymer-modified gold surface highly recognized fully matched DNA, rather than unmatched DNA. Therefore, DNA-conjugated polymer can be used for novel DNA chip fabrication.     

A versatile surfactant‐mediated synthetic route to gold/polyaniline derivative core/shell nanocomposites

This article describes a versatile two‐step method for gold/polyaniline derivative core/shell nanocomposites with the aid of nonionic surfactant F127. First, F127 and monomer were introduced to gold colloids followed by the addition of oxidant to initiate the polymerization of monomer to afford a conducting polymer shell around each gold nanoparticle. Experimental parameters, such as kinds and concentrations of surfactant and monomer, gold core size and shape, reaction time, were systematically investigated to disclose the underground mechanisms involved in the formation of gold/polymer core/shell nanocomposites. Furthermore, Fourier transform infrared, ultraviolet–visible, X‐ray diffraction, and X‐ray photoelectron spectroscopy techniques were used to characterize the gold/polymer core/shell nanocomposites. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3903–3912, 2010     

Synthesis of a stable,foamable, gold-containing organic carboxylate polymer

The functionalized polyethylene acrylic acid copolymers Primacor 1430 (P1430, containing 9.5% acrylic acid) and Primacor 5980 (P5980, containing 20% acrylic acid) have been used to synthesize gold/polymer dispersions and gold/polymer ionomers, respectively. When [Ph₃PAu]⁺ is bonded directly to the carboxylate, work-up of the polymer leads to decarboxyation and metallic gold formation. However, ionic bonding of [(Ph₃P)₂Au]⁺, and related bis phosphine cations produce workable, foamable polymers. Analysis shows samples from these reactions to contain between 4–15 wt % of Au depending on the type of gold complex used and the reaction conditions. The gold/polymer (ionomer) sample with about 12% Au has been worked to mold sheets of foam. © 1993 John Wiley & Sons, Inc.     

Solution-based assembly of conductive gold film on flexible polymer substrates

Conductive films of gold were assembled on flexible polymer substrates such as Kapton and polyethylene using a solution-based process. The polymer substrates were modified by using argon plasma and subsequent coupling of silanes with amino- or mercapto- terminal groups. These modified surfaces were examined by X-ray photoelectron spectroscopy and contact angle measurements. Colloidal gold was assembled onto the silane-modified surface from solution. The gold particles are attached to the surface by covalent interactions with the thiol or amine group. Formation of a conductive film is achieved by increasing the coverage of gold by using a "seeding" method to increase the size of the attached gold particles. Field emission scanning electron microscopy was used to follow the growth of the film. The surface resistance of the films, measured using a four-point probe, was about 1 Omega/sq.     

A high selective ion‐imprinted polymer grafted on a novel nanoporous material for efficient gold extraction

In this work, for the first time, an ion‐imprinted polymer was developed for selective extraction and determination of gold ions. To increase the sorbent efficiency, this polymer was coated on a novel nanoporous carbon‐based material, carbohydrate‐derived Max‐Planck Gesellschaft 1, which is also the first example of grafting imprinted polymer on nanoporous‐carbon material. These particles were applied successfully for preconcentration of ultratrace amount of gold ions, following determination by flame atomic absorption spectrometry. Some effective factors on the efficiency of gold ions extraction, such as concentration and volume of eluent, sample and eluent flow rates, and also effect of interfering ions especially palladium and platinum ions, were investigated. The LOD was determined to be 0.27 ng/mL. Furthermore, the precision of the method was calculated to be 2.14% under optimal conditions with recovery more than 97.3%. The technique was also used to determine the concentration of gold ions in mine stone samples with satisfactory results. The accuracy of this method was investigated by determination of gold ions concentrations in several reference materials with certified gold content.     

Fabrication of dendritic gold nanoparticles by use of an ionic polymer template

A facile method for the fabrication of dendritic gold nanoparticles (NPs) by use of an ionic polymer template has been developed. In situ generation of an imidazolium-based (cationic) polymer, poly[1-methyl-3-(4-vinylbenzyl)imidazolium], with AuCl4- counteranions is achieved by addition of HAuCl4 into a solution containing poly[1-methyl-3-(4-vinylbenzyl)imidazolium chloride]. Subsequent reduction with NaBH4 in water or in a mixture of ethanol and water affords various NPs depending on the conditions, including large dendritic gold NPs that have been analyzed by transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDS), and selected area electron diffraction (SAED). The structures of the dendritic gold NPs were found to depend on the ethanol concentration. Scanning electron microscopy (SEM) images of the ionic polymer reveal that the solvent used to deposit the polymer strongly influences its structure and may be correlated to the structure of the resulting NPs.     

In Situ Formation of Gold Nanoparticles within a Polymer Particle and Their Catalytic Activities in Various Chemical Reactions

Composite materials consisting of nanoscale gold particles and protective polymer shells were designed and tested as catalysts in various chemical reactions. Initially, the systematic incorporation of multiple gold nanoparticles into a poly(N-isopropylacrylamide) particle was achieved by an in situ method under light irradiation. The degree of gold nanoparticle loading, along with the structural and morphological properties, was examined as a function of the amount of initial gold ions and reducing agent. As these gold nanoparticles were physically-embedded within the polymer particle in the absence of strong interfacial interactions between the gold nanoparticles and polymer matrix, the readily-accessible surface of the gold nanoparticles with a highly increased stability allowed for their use as recyclable catalysts in oxidation, reduction, and coupling reactions. Overall, the ability to integrate catalytically-active metal nanoparticles within polymer particles in situ allows for designing novel composite materials for multi-purpose catalytic systems.     

Amine‐Functionalized Polyglycidyl Methacrylate Microsphere as a Unified Template for the Synthesis of Gold Nanoparticles and Single‐Crystal Gold Plates

Polyglycidyl methacrylate (PGMA) microspheres, crosslinked and surface‐functionalized by amine, can be used as a solid‐state template for the synthesis of gold (Au) crystals in the forms of either nanoparticles (NPs) or plates. It is discovered that the polymer microsphere acts as an internal template to cultivate Au NPs inside the microsphere or an external template to generate the single‐crystal plates depending on the critical concentration (C_cr) of gold ions. The ion–dipole interaction and the structure‐dependent solubility of gold induce two distinct gold nanostructures in the presence of the functionalized polymer microspheres. The catalytic activity and long‐term storage of the developed gold nanostructures that can be easily scaled‐up for mass production through the developed novel methodology is demonstrated.     

Fluorescent or not? Size-dependent fluorescence switching for polymer-stabilized gold clusters in the 1.1-1.7 nm size range

The synthesis of fluorescent water-soluble gold nanoparticles by the reduction of a gold salt in the presence of a designed polymer ligand is described, the size and fluorescence of the particles being controlled by the polymer to gold ratio; the most fluorescent nanomaterial has a 3% quantum yield, a 1.1 nm gold core and a 6.9 nm hydrodynamic radius.     

Polymer Cages as Universal Tools for the Precise Bottom‐Up Synthesis of Metal Nanoparticles

A template synthesis allows the preparation of monodisperse nanoparticles with high reproducibility and independent from self‐assembly requirements. Tailor‐made polymer cages were used for the preparation of nanoparticles, which were made of cross‐linked macromolecules with pendant thiol groups. Gold nanoparticles (AuNPs) were prepared in the polymer cages in situ, by using different amounts of cages versus gold. The polymer cages exhibited a certain capacity, below which the AuNPs could be grown with excellent control over the size and shape. Control experiments with a linear diblock copolymer showed a continuous increase in the AuNP size as the gold feed increased. This completely different behavior regarding the AuNP size evolution was attributed to the flexibility of the polymer chain depending on cross‐linking. Moreover, the polymer cages were suitable for the encapsulation of AgNPs, PdNPs, and PtNPs by the in situ method.     

Development of a biologically relevant calcium phosphate substrate for sum frequency generation vibrational spectroscopy

A novel biologically relevant composite substrate has been prepared consisting of a calcium phosphate (CaP) layer formed by magnetron sputter-coating from a hydroxyapatite (HA) target onto a gold-coated silicon substrate. The CaP layer is intended to mimic tooth and bone surfaces and allows polymers used in oral care to be deposited in a procedure analogous to that used for dental surfaces. The polymer cetyl dimethicone copolyol (CDC) was deposited onto the CaP surface of the substrate by Langmuir Blodgett deposition, and the structure of the adsorbed layer was investigated by the surface specific technique of sum frequency generation (SFG) vibrational spectroscopy. The gold sublayer provides enhancement of the SFG signal arising from the polymer but plays no part in the adsorption of the polymer. The surface morphology of the substrate was investigated using SEM and AFM. The surface roughness was commensurate with that of the thermally evaporated gold sublayer and uniform over areas of at least 36 mum(2). The chemical composition of the CaP-coated surface was determined by FTIR and TOF-SIMS. It was concluded that the surface is primarily calcium phosphate present as a mixture of amorphous, non-hydroxylated phases rather than solely stoichiometric hydroxyapatite. The SFG spectra from CDC on CaP were closely similar, both in resonance wavenumbers and in their relative intensities, with spectra of thin films of CDC recorded directly on gold. Application of previous analysis of the spectra of CDC on gold therefore enabled interpretation of the polymer orientation and conformation on the CaP substrate.     

金表面聚合物刷及图案化微结构的制备

采用表面引发室温原子转移自由基聚合(ATRP)方法在金基底上原位制备了接枝聚合物刷,其制备过程用厚度测量,ATR-FTIR,XPS等进行了表征,初始时聚合物刷的厚度随着聚合时间的增加线性增加,表现为活性聚合的特征．XPS表征证明表面引发聚合后聚合物刷末端仍然存在ATRP反应的引发剂．紫外光刻图案化的聚合物刷作为电沉积的模板,经电沉积、后紫外处理、湿化学刻蚀步骤后得到了分离的导电聚合物微阵列结构,通过浇注／粘附处理将导电聚合物微阵列转移至硅油弹性体片,由于导电聚合物在湿化学刻蚀中对基底金具有良好的保护作用,因此在导电聚合物阵列被转移后,基底表面得到金微阵列。     

Synthesis and characterization of monodispersed core-shell spherical colloids with movable cores

Gold nanoparticles have been conformally coated with amorphous silica (using a sol-gel method) and then an organic polymer (via surface-grafted, atom transfer radical polymerization) to form spherical colloids with a core-double-shell structure. The thickness of silica and polymer shells could be conveniently controlled in the range of tens to several hundred nanometers by changing the concentration of the reagent and/or the reaction time. Selective removal of the silica layer (through etching in aqueous HF) led to the formation of hollow polymer beads containing movable gold cores. This new form of core-shell particles provides a unique system for measuring the feature size and transport property associated with hollow particles. In one demonstration, we showed that the thickness of a closed polymer shell could be obtained by mapping the electrons backscattered from the core and shell. In another demonstration, the plasmon resonance band of the gold cores was used as an optical probe to follow the diffusion kinetics of chemical reagents across the polymer shells.     

Macroscale Chemotaxis from a Swarm of Bacteria‐Mimicking Nanoswimmers

Inspired by the dynamics of bacterial swarming, we report a swarm of polymer‐brush‐grafted, glucose‐oxidase‐powered Janus gold nanoswimmers with a positive, macroscale chemotactic behavior. These nanoswimmers are prepared through the grafting of polymer brushes onto one side of gold nanoparticles, followed by functionalization with glucose oxidase on the other side. The resulting polymer‐brush‐functionalized Janus gold nanoswimmers exhibit efficient propulsion with a velocity of up to approximately 120 body lengths s^?1 in the presence of glucose. The comparative analysis of their kinematic behavior reveals that the grafted polymer brushes significantly improve the translational diffusion of Janus gold nanoswimmers. Particularly, these bacteria‐mimicking Janus gold nanoswimmers display a collectively chemotactic motion along the concentration gradient of a glucose resource, which could be observed at the macroscale.     

Fabrication of Gold Nano‐Structures with Azopolymer Templates

Fabrication of gold nano‐patterns has been demonstrated employing surface relief structures created on films of an azobenzene‐functionalized polymer as templates. The surface relief templates were photoinscribed on the azopolymer films in one‐step with two laser beams. Thin layers of gold were over‐coated on the polymer templates by thermal evaporation. Gold lines of a few hundred nanometer width were successfully fabricated by pyrolyzing the azobenzene polymer. Sub‐micron gold dots were also created. The resulting gold structures exhibited the same periodicity as the polymer templates.     

Electrochemical nucleation of gold nanoparticles in a polymer film at a liquid-liquid interface

Simultaneous nucleation of gold nanoparticles and polymerization of tyramine has been carried out at an immiscible electrolyte interface. By transferring the gold ion of tetraoctylammoniumtetracloroaurate (TOAAuCl(4)) from the organic to the aqueous phase, a fast homogeneous electron transfer from the tyramine monomer reduces the gold ion. Electropolymerization then proceeds, and gold nanoparticles form. The newly formed nanoparticles act as nucleation sites for the deposition of the oligomers/polymer (and possibly vice versa). This results in gold nanoparticles stabilized in a polytyramine matrix. The size of the nanoparticles is controlled by the concentration of oligomers/polymer in solution. The polymer nanoparticle composite film was analyzed with TEM, XPS, and AFM.     

Reversible assembly and disassembly of gold nanoparticles directed by a zwitterionic polymer

Herein, we have successfully introduced the stimuli-response concept into the controllable synthesis of gold nanoparticles (AuNPs) with designed properties. We used a pH-responsive zwitterionic polymer that acted as a template and a stabilizer. Gold colloids prepared in situ from the polymer solution have a narrow size distribution of about 5 nm. The assembly and disassembly of AuNPs can be finely tuned by modulating the net charges of the zwitterionic polymer so that they are either positive or negative as a function of the solution pH. Different aggregates and colors appear on altering the solution pH. In acidic solutions, gold colloids form large symmetrical aggregates, while the AuNPs disperse in solutions with a pH approximately 9.6. However, as the solution pH increases (>9.6), needle-like aggregates with a small interparticle distances are formed. On the basis of TEM, SEM, 1H NMR and UV/Vis measurements, we attribute pH-triggered aggregation and color changes of the gold colloids to the ionization process and conformational change of the polymer. The ionization process governs the choice of ligand anchored on the surface of AuNPs, and the conformational change of the polymer modulates the interspaces between AuNPs. The present approach, which is based on a rational design of the physicochemical properties of the template used in the synthesis process, provides a powerful means to control the properties of the nanomaterial. Furthermore, the colorimetric readout can be visualized and applied to future studies on nanoscale switches and sensors.     

Pluronics‐Stabilized Gold Nanoparticles: Investigation of the Structure of the Polymer–Particle Hybrid

Hybrid gold–polymer nanoparticles are obtained by self‐assembly of amphiphilic copolymers (Pluronics) in solutions containing preformed gold nanoparticles (diameter ca. 12 nm). Dynamic light scattering, TEM, cryo‐TEM, and small‐angle neutron scattering experiments with contrast variation are used to characterize the structure of the gold–polymer particles. Five Pluronics (F127, F68, F88, F108, P84) with different molecular weights and hydrophilic/hydrophobic balances are investigated. Gold nanoparticles are individually embedded within globules of polymer, even under conditions for which Pluronics micelles do not form in solution. The hybrid particles are several tens of nanometers in size (larger than micelles of the corresponding Pluronics), and the size can be tuned by changing the temperature.