Electron attachment to higher fullerenes and to Sc3N@C80

We report on attachment of free electrons to fullerenes C(n) (n = 60, 70, 76, 78, 80, 82, 84, 86) and to Sc(3)N@C(80). The attachment cross sections exhibit a strong resonance at 0 eV for all species. The overall shape of the anion yield versus electron energy is quite similar for the higher fullerenes, with a minimum around 1 eV and a maximum which gradually shifts from 6 eV for C(60) to approximately 4 eV for large n. The endohedral Sc(3)N@C(80) exhibits a particularly shallow minimum and a maximum below 4 eV. We model autoionization of the anions with due consideration of the internal energy distributions. The relatively low electron affinity of Sc(3)N@C(80) is reflected in its reduced ion yield at higher attachment energies.     

Charge transfer collisions between fullerenes: C 60 3+ + C60

Charge transfer collisions between C ₆₀ ³⁺ and C₆₀ are studied for collision energies between 400 and 3600 eV. Single and double electron transfers are observed, both occuring under single collision conditions. Absolute charge transfer cross sections are determined as a function of collision energy. The cross section for single electron capture of approx. 300 Ų is about two times larger than that for double electron transfer. For both processes the cross section increases slightly with increasing collision energy.     

Electron transfer and bond-forming reactions following collisions of Cl2+ and HCl2+ with CO

Collisions between Cl(2+) and CO have been investigated using time-of-flight mass spectrometry over a collision energy range between 2.2 eV and 7.1 eV in the centre-of-mass frame. The formation of Cl(+), CO(+) and C(+) in electron transfer reactions has been detected and an unusual bond-forming reaction which generates CCl(2+) has also been observed. The reactive cross-sections, in arbitrary units, for the electron transfer reactions have been evaluated. To extract these cross sections we employ a new method of analysing mass spectral intensities for crossed-beam experiments, an algorithm which allows inter-comparison of the fluxes of all the ionic products from the electron transfer reactions. The observed electron transfer reactivity has been rationalized by calculations based on Landau-Zener theory. To account for the observation of CCl(2+), we have calculated the relevant energetics showing that the lowest lying doublet state of this dication is bound and is energetically accessible at our collision energies. These energetic arguments indicate that electron transfer in the exit channel between the separating CCl(2+) and O atom probably forms C(+) ions via the dissociation of CCl(+). Additionally, collisions between HCl(2+) and CO have been studied at collision energies from 2.2 to 7.0 eV in the centre-of-mass frame. In this collision system, proton transfer to form HCO(+) is observed to compete efficiently with dissociative and non-dissociative electron transfer.     

A pulsed-field ionization photoelectron secondary ion coincidence study of the H2+ (X,upsilon+=0-15,N+=1)+He proton transfer reaction

The endothermic proton transfer reaction, H2+(upsilon+)+He-->HeH+ + H(DeltaE=0.806 eV), is investigated over a broad range of reactant vibrational levels using high-resolution vacuum ultraviolet to prepare reactant ions either through excitation of autoionization resonances, or using the pulsed-field ionization-photoelectron-secondary ion coincidence (PFI-PESICO) approach. In the former case, the translational energy dependence of the integral reaction cross sections are measured for upsilon+=0-3 with high signal-to-noise using the guided-ion beam technique. PFI-PESICO cross sections are reported for upsilon+=1-15 and upsilon+=0-12 at center-of-mass collision energies of 0.6 and 3.1 eV, respectively. All ion reactant states selected by the PFI-PESICO scheme are in the N+=1 rotational level. The experimental cross sections are complemented with quasiclassical trajectory (QCT) calculations performed on the ab initio potential energy surface provided by Palmieri et al. [Mol. Phys. 98, 1839 (2000)]. The QCT cross sections are significantly lower than the experimental results near threshold, consistent with important contributions due to resonances observed in quantum scattering studies. At total energies above 2 eV, the QCT calculations are in excellent agreement with the present results. PFI-PESICO time-of-flight (TOF) measurements are also reported for upsilon+=3 and 4 at a collision energy of 0.6 eV. The velocity inverted TOF spectra are consistent with the prevalence of a spectator-stripping mechanism.     

A guided-ion beam study of the reactions of Xe(+) and Xe(2+) with NH(3) at hyperthermal collision energies

We have measured the absolute cross sections for reactions of Xe(+) and Xe(2+) with NH(3) at collision energies in the range from near-thermal to ～34 and ～69?eV, respectively. For Xe(+), the cross section for charge transfer, the only exothermic channel, decreases from ～200A?(2) below 0.1 eV to ～12A?(2) at the highest energies studied. The production of NH(3) (+) is the only channel observed below 5 eV, above which a small amount of NH(2) (+) is also formed. In Xe(2+) reactions, the main products observed are NH(3) (+) and NH(2) (+). The charge transfer cross section decreases monotonically from ～80 to ～6A?(2) over the studied energy range. The NH(2) (+) cross section is similar to the charge transfer cross section at the lowest energies, and exhibits a second component above 0.4 eV, with a maximum of 65A?(2) at 0.7 eV, above which the cross section decreases to ～30A?(2) at the highest energies studied. At energies above 10 eV, a small amount of NH(+) is also observed in Xe(2+) collisions. Product recoil velocity distributions were determined at selected collision energies, using guided-ion beam time-of-flight methods.     

H+ versus D+) transfer from HOD+ to N2: mode- and bond-selective effects

Reactions of HOD(+) with N(2) have been studied for HOD(+) in its ground state and with one quantum of excitation in each of its vibrational modes: (001)--predominately OH stretch, 0.396 eV, (010)--bend, 0.153 eV, and (100)--predominately OD stretch, 0.293 eV. Integral cross sections and product recoil velocities were recorded for collision energies from threshold to 4 eV. The cross sections for both H(+) and D(+) transfer rise slowly from threshold with increasing collision energy; however, all three vibrational modes enhance reaction much more strongly than equivalent amounts of collision energy and the enhancements remain large even at high collision energy, where the vibration contributes less than 10% of the total energy. Excitation of the OH stretch enhances H(+) transfer by a factor of ～5, but the effect on D(+) transfer is only slightly larger than that from an equivalent increase in collision energy, and smaller than the effect from the much lower energy bend excitation. Similarly, OD stretch excitation strongly enhances D(+) transfer, but has essentially no effect beyond that of the additional energy on H(+) transfer. The effects of the two stretch vibrations are consistent with the expectation that stretching the bond that is broken in the reaction puts momentum in the correct coordinate to drive the system into the exit channel. From this perspective it is quite surprising that bend excitation also results in large (factor of 2) enhancements of both H(+) and D(+) transfer channels, such that its effect on the total cross section at collision energies below ～2 eV is comparable to those from the two stretch modes, even though the bend excitation energy is much smaller. For collision energies above ～2 eV, the vibrational effects become approximately proportional to the vibrational energy, though still much larger than the effects of equivalent addition of collision energy. Measurements of the product recoil velocity distributions show that reaction is direct at all collision energies, with roughly half the products in a sharp peak corresponding to stripping dynamics and half with a broad and approximately isotropic recoil velocity distribution. Despite the large effects of vibrational excitation on reactivity, the effects on recoil dynamics are small, indicating that vibrational excitation does not cause qualitative changes in the reaction mechanism or in the distribution of reactive impact parameters.     

An experimental and quasiclassical trajectory study of the rovibrationally state-selected reactions: HD+(v=0-15,j=1)+He-->HeH+(HeD+)+D(H)

The absolute integral cross sections for the formation of HeH+ and HeD+ from the collisions of HD+(v,j=1)+He have been examined over a broad range of vibrational energy levels v=0-13 at the center-of-mass collision energies (ET) of 0.6 and 1.4 eV using the vacuum ultraviolet (VUV) pulsed field ionization photoelectron secondary ion coincidence method. The ET dependencies of the integral cross sections for products HeH+ and HeD+ from HD+(v=0-4)+He collisions in the ET range of 0-3 eV have also been measured using the VUV photoionization guided ion beam mass spectrometric technique, in which vibrationally selected HD+(v) reactant ions were prepared via excitation of selected autoionization resonances of HD. At low total energies, a pronounced isotope effect is observed in absolute integral cross sections for the HeH++D and HeD++H channels with significant favoring of the deuteron transfer channel. As v is increased in the range of v=0-9, the integral cross sections of the HeH++D channel are found to approach those of HeD++H. The observed velocity distributions of products HeD+ and HeH+ are consistent with an impulsive or spectator-stripping mechanism. Detailed quasiclassical trajectory (QCT) calculations are also presented for HD+(v,j=1)+He collisions at the same energies of the experiment. The QCT calculations were performed on the most accurate ab initio potential energy surface available. If the zero-point energy of the reaction products is taken into account, the QCT cross sections for products HeH+ and HeD+ from HD+(v)+He are found to be significantly lower than the experimental results at ET values near the reaction thresholds. The agreement between the experimental and QCT cross sections improves with translational energy. Except for prethreshold reactivity, QCT calculations ignoring the zero-point energy in the products are generally in good agreement with experimental absolute cross sections. The experimental HeH+/HeD+ branching ratios for the HD+(v=0-9)+He collisions are generally consistent with QCT predictions. The observed isotope effects can be rationalized on the basis of differences in thermochemical thresholds and angular momentum conservation constraints.     

Low-energy electron attachment to SF6. II. Temperature and pressure dependences of dissociative attachment

Low-energy electron-molecule collisions, leading to dissociative attachment through metastable anionic states, are kinetically modeled within the framework of statistical unimolecular rate theory. The reaction e(-)+SF(6)-->SF(5)(-)+F is used as an illustrative example. The modeling is applied to new measurements of branching fractions for SF(5)(-) formation in the bath gas He between 360 and 670 K at 1 and 2 Torr, and between 490 and 620 K over the range of 0.3-9 Torr. The analysis of the data follows the previous kinetic modeling of the nondissociative electron attachment, e(-)+SF(6)-->SF(6)(-), from Part I of this series. Experimental results from the present work and the literature on branching fractions and total cross sections for anion formation as functions of electron energies, bath gas temperatures and pressures, as well as observation times are analyzed. The assumption of a participation of the electronic ground state of SF(6)(-) alone suffices to model the available experimental data. A value of the dissociation energy of SF(6)(-) into SF(5)(-)+F of E(0,dis)=1.61(+/-0.05) eV is determined, which may be compared to the electron affinity of SF(6), EA=1.20(+/-0.05) eV, such as derived in Part III of this series.     

Temporary anion states of pyrimidine and halopyrimidines

The empty-level electronic structures of pyrimidine and its 2-chloro, 2-bromo, and 5-bromo derivatives have been studied with electron transmission spectroscopy (ETS) and dissociative electron attachment spectroscopy (DEAS) in the 0-5 eV energy range. The spectral features were assigned to the corresponding anion states with the support of theoretical calculations at the ab initio and density functional theory levels. The empty orbital energies obtained by simple Koopmans' theorem calculations, scaled with empirical equations, quantitatively reproduced the energies of vertical electron attachment to π* and σ* empty orbitals measured in the ET spectra and predicted vertical electron affinities close to zero for the three halo derivatives. The total anion currents of the halo derivatives, measured at the walls of the collision chamber as a function of the impact electron energy, presented intense maxima below 0.5 eV. The mass-selected spectra showed that, in this energy, range the total anion current is essentially due to halide fragment anions. The DEA cross sections of the bromo derivatives were found to be about six times larger than that of the chloro derivative. The absolute cross sections at incident electron energies close to zero were evaluated to be 10(-16)-10(-15) cm(2).     

Electron scattering by methanol and ethanol: a joint theoretical-experimental investigation

We present a joint theoretical-experimental study on electron scattering by methanol (CH(3)OH) and ethanol (C(2)H(5)OH) in a wide energy range. Experimental differential, integral and momentum-transfer cross sections for elastic electron scattering by ethanol are reported in the 100-1000 eV energy range. The experimental angular distributions of the energy-selected electrons are measured and converted to absolute cross sections using the relative flow technique. Moreover, elastic, total, and total absorption cross sections for both alcohols are calculated in the 1-500 eV energy range. A complex optical potential is used to represent the dynamics of the electron-alcohol interaction, whereas the scattering equations are solved iteratively using the Pade?'s approximant technique. Our calculated data agree well with those obtained using the Schwinger multichannel method at energies up to 20 eV. Discrepancies at high energies indicate the importance of absorption effects, included in our calculations. In general, the comparison between our theoretical and experimental results, as well as with other experimental data available in the literature, also show good agreement. Nevertheless, the discrepancy between the theoretical and experimental total cross sections at low incident energies suggests that the experimental cross sections measured using the transmission technique for polar targets should be reviewed.     

Increasing stability of the fullerenes with the number of carbon atoms: the experimental evidence

The values of the molar standard enthalpies of formation, Delta(f)H(o)(m)(C(76), cr) = (2705.6 +/- 37.7) kJ x mol(-1), Delta(f)H(o)(m)(C(78), cr) = (2766.5 +/- 36.7) kJ x mol(-1), and Delta(f)H(o)(m)(C(84), cr) = (2826.6 +/- 42.6) kJ x mol(-1), were determined from the energies of combustion, measured by microcombustion calorimetry on a high-purity sample of the D(2) isomer of fullerene C(76), as well as on a mixture of the two most abundant constitutional isomers of C(78) (C(2nu)-C(78) and D(3)-C(78)) and C(84) (D(2)-C(84), and D(2d)-C(84). These values, combined with the published data on the enthalpies of sublimation of each cluster, lead to the gas-phase enthalpies of formation, Delta(f)H(o)(m)(C(76), g) = (2911.6 +/- 37.9) kJ x mol(-1); Delta(f)H(o)(m)(C(78), g) = (2979.3 +/- 37.2) kJ x mol(-1), and Delta(f)H(o)(m)(C(84), (g)) = (3051.6 +/- 43.0) kJ x mol(-1), results that were found to compare well with those reported from density functional theory calculations. Values of enthalpies of atomization, strain energies, and the average C-C bond energy were also derived for each fullerene. A decreasing trend in the gas-phase enthalpy of formation and strain energy per carbon atom as the size of the cluster increases is found. This is the first experimental evidence that these fullerenes become more stable as they become larger. The derived experimental average C-C bond energy E(C-C) = 461.04 kJ x mol(-1) for fullerenes is close to the average bond energy E(C-C) = 462.8 kJ x mol(-1) for polycyclic aromatic hydrocarbons (PAHs).     

Electron ionization of acetylene

Relative partial ionization cross sections and precursor specific relative partial ionization cross sections for fragment ions formed by electron ionization of C2H2 have been measured using time-of-flight mass spectrometry coupled with a 2D ion-ion coincidence technique. We report data for the formation of H+, H+2, C2+, C+/C2+ 2, CH+/C2H+2, CH+2, C+2, and C2H+ relative to the formation of C2H+2, as a function of ionizing electron energy from 30-200 eV. While excellent agreement is found between our data and one set of previously published absolute partial ionization cross sections, some discrepancies exist between the results presented here and two other recent determinations of these absolute partial ionization cross sections. We attribute these differences to the loss of some translationally energetic fragment ions in these earlier studies. Our relative precursor-specific partial ionization cross sections enable us, for the first time, to quantify the contribution to the yield of each fragment ion from single, double, and triple ionization. Analysis shows that at 50 eV double ionization contributes 2% to the total ion yield, increasing to over 10% at an ionizing energy of 100 eV. From our ion-ion coincidence data, we have derived branching ratios for charge separating dissociations of the acetylene dication. Comparison of our data to recent ab initio/RRKM calculations suggest that close to the double ionization potential C2H2+2 dissociates predominantly on the ground triplet potential energy surface (3Sigma*g) with a much smaller contribution from dissociation via the lowest singlet potential energy surface (1Delta g). Measurements of the kinetic energy released in the fragmentation reactions of C2H2+2 have been used to obtain precursor state energies for the formation of product ion pairs, and are shown to be in good agreement with available experimental data and with theory.     

Experimental and theoretical elastic cross sections for electron collisions with the C3H6 isomers

In the present work we report cross sections for electron collisions with the isomers propene (C3H6) and cyclopropane (c-C3H6). Electron-scattering differential cross sections (DCS) are reported for measurements carried out for energies 1.5-100 eV and the angular range of 20 degrees-120 degrees. Elastic integral cross sections (ECS), DCS, and momentum-transfer cross sections (MTCS) are reported for calculations carried out using the Schwinger multichannel method with pseudopotentials for the energy range of 2.0-40 eV and angular range of 0 degrees-180 degrees. The resemblance of the pi* shape resonance in the cross sections, observed at 1.5-2.0 eV for propene, to those in C2H4 and C2F4 clearly points to the effect of the double bond in the molecular structures for these molecules. Below 60 eV, we observed clear differences in peak positions and magnitudes between the DCS, ECS, and MTCS for C3H6 and c-C3H6, which we view as the isomer effect.     

Photoelectron spectroscopy of fullerene dianions C76(2-), C78(2-), and C84(2-)

We report laser photoelectron spectra of the doubly negatively charged fullerenes C(76) (2-), C(78) (2-), and C(84) (2-) at 2.33, 3.49, and 4.66 eV photon energy. From these spectra, second electron affinities and vertical detachment energies, as well as estimates for the repulsive Coulomb barriers are obtained. These results are discussed in the context of electrostatic models. They reveal that fullerenes are similar to conducting spheres, with electronic properties scaling with their size. The experimental spectra are compared with the accessible excited states of the respective singly charged product ions calculated in the framework of time dependent density functional theory.     

Absolute partial cross sections and kinetic energy analysis for the electron impact ionization of ethylene

We present absolute partial electron impact ionization cross sections for ethylene in the electron energy range between threshold and 1000 eV measured with a two sector field double focusing mass spectrometer. Ion kinetic energy distribution functions have been measured at all electron energies by applying a deflection field method. Multiplication of the measured relative cross sections by the appropriately determined discrimination factors lead to accurate relative partial cross sections. Normalization of the sum of the relative partial cross sections to an absolute total cross section gives absolute partial cross section values. The initial kinetic energy distributions of several fragment ions show the presence of two or more contributions that exhibit different electron energy dependencies. Differential cross sections with respect to the initial kinetic energy of the ions are provided and are related to specific ion production channels. The electron threshold energies for the direct and numerous other dissociative ionization channels are determined by quantum chemical calculation and these allow the determination of the total kinetic energy release and the electron energy loss for the most prominent dissociative ionization channels.     

Rotational dependence of the proton-transfer reaction HBr+ + CO2 → HOCO+ + Br. II. Comparison of HBr+ (2Π(3/2)) and HBr+ (2Π(1/2))

The effects of reactant ion rotational excitation on the exothermic proton-transfer reactions of HBr(+)((2)Π(1/2)) and DBr(+)((2)Π(1/2)), respectively, with CO(2) were studied in a guided ion beam apparatus. Cross sections are presented for collision energies in the center of mass system E(c.m.) in the range of 0.23 to 1.90 eV. The HBr(+)/DBr(+) ions were prepared in a state-selective manner by resonance enhanced multiphoton ionization. The mean rotational energy was varied from 3.4 to 46.8 meV for HBr(+)((2)Π(1/2)) and from 1.8 to 40.9 meV for DBr(+)((2)Π(1/2)). Both reactions studied are inhibited by collision energy, as expected for exothermic reactions. For all collision energies considered, the cross section decreases with increasing rotational energy of the ion, but the degree of the rotational dependence differs depending on the collision energy. For E(c.m.) = 0.31 eV, the cross sections of the deuteron transfer are significantly larger than those of the proton transfer. For higher E(c.m.) they differ very little. The current results for the exothermic proton transfer are systematically compared to previously published data for the endothermic proton transfer starting from HBr(+)((2)Π(3/2)) [L. Paetow et al., J. Chem. Phys. 132, 174305 (2010)]. Additional new data regarding the latter reaction are presented to further confirm the conclusions. The dependences on rotational excitation found cannot be explained by the corresponding change in the total energy of the system. For both the endothermic and the exothermic reaction, the cross section is maximized for the smallest rotational energy, at least well above the threshold.     

Reactions of O+ with CnH2n+2, n=2-4: a guided-ion beam study

We have measured absolute reaction cross sections for the interaction of O(+) with ethane, propane, and n-butane at collision energies in the range from near thermal to approximately 20 eV, using the guided-ion beam (GIB) technique. We have also measured product recoil velocity distributions using the GIB time-of-flight (TOF) technique for several product ions at a series of collision energies. The total cross sections for each alkane are in excess of 100 A(2) at energies below approximately 2 eV, and in each case several ionic products arise. The large cross sections suggest reactions that are dominated by large impact parameter collisions, as is consistent with a scenario in which the many products derive from a near-resonant, dissociative charge-transfer process that leads to several fragmentation pathways. The recoil velocities, which indicate product ions with largely thermal velocity distributions, support this picture. Several product ions, most notably the C(2)H(3) (+) fragment for each of the alkanes, exhibit enhanced reaction efficiency as collision energy increases, which can be largely attributed to endothermic channels within the dissociative charge-transfer mechanism.     

Guided-ion beam and theoretical study of the potential energy surface for activation of methane by W+

A guided-ion beam tandem mass spectrometer is used to study the reactions, W(+) + CH(4) (CD(4)) and [W,C,2H](+) + H(2) (D(2)), to probe the [W,C,4H](+) potential energy surface. The reaction W(+) + CH(4) produces [W,C,2H](+) in the only low-energy process. The analogous reaction in the CD(4) system exhibits a cross section with strong differences at the lowest energies caused by zero-point energy differences, demonstrating that this reaction is slightly exothermic for CH(4) and slightly endothermic for CD(4). The [W,C,2H](+) product ion reacts further at thermal energies with CH(4) to produce W(CH(2))(x)(+) (x = 2-4). At higher energies, the W(+) + CH(4) reaction forms WH(+) as the dominant ionic product with smaller amounts of WCH(3)(+), WCH(+), and WC(+) also formed. The energy dependent cross sections for endothermic formation of the various products are analyzed and allow the determination of D(0)(W(+)-CH(3)) approximately 2.31 +/- 0.10 eV, D(0)(W(+)-CH(2)) = 4.74 +/- 0.03 eV, D(0)(W(+)-CH) = 6.01 +/- 0.28 eV, and D(0)(W(+)-C) = 4.96 +/- 0.22 eV. We also examine the reverse reaction, [W,C,2H](+) + H(2) (D(2)) --> W(+) + CH(4) (CH(2)D(2)). Combining the cross sections for the forward and reverse processes yields an equilibrium constant from which D(0)(W(+)-CH(2)) = 4.72 +/- 0.04 eV is derived. Theoretical calculations performed at the B3LYP/HW+/6-311++G(3df,3p) level yield thermochemistry in reasonable agreement with experiment. These calculations help identify the structures and electronic states of the species involved and characterize the potential energy surface for the [W,C,4H](+) system.     

Dissociative recombination cross section and branching ratios of protonated dimethyl disulfide and N-methylacetamide

Dimethyl disulfide (DMDS) and N-methylacetamide are two first choice model systems that represent the disulfide bridge bonding and the peptide bonding in proteins. These molecules are therefore suitable for investigation of the mechanisms involved when proteins fragment under electron capture dissociation (ECD). The dissociative recombination cross sections for both protonated DMDS and protonated N-methylacetamide were determined at electron energies ranging from 0.001 to 0.3 eV. Also, the branching ratios at 0 eV center-of-mass collision energy were determined. The present results give support for the indirect mechanism of ECD, where free hydrogen atoms produced in the initial fragmentation step induce further decomposition. We suggest that both indirect and direct dissociations play a role in ECD.     

Gas-phase SN2 and bromine abstraction reactions of chloride ion with bromomethane: reaction cross sections and energy disposal into products

Reaction cross sections and product velocity distributions are presented for the bimolecular gas-phase nucleophilic substitution (S(N)2) reaction Cl(-) + CH(3)Br --> CH(3)Cl + Br(-) as a function of collision energy, 0.06-24 eV. The exothermic S(N)2 reaction is inefficient compared with phase space theory (PST) and ion-dipole capture models. At the lowest energies, the S(N)2 reaction exhibits the largest cross sections and symmetrical forward/backward scattering of the CH(3)Cl + Br(-) products. The velocity distributions of the CH(3)Cl + Br(-) products are in agreement with an isotropic PST distribution, consistent with a complex-mediated reaction and a statistical internal energy distribution of the products. Above 0.2 eV, the velocity distributions become nonisotropic and nonstatistical, exhibiting CH(3)Cl forward scattering between 0.2 and 0.6 eV. A rebound mechanism with backward scattering above 0.6 eV is accompanied by a new rising feature in the CH(3)Cl + Br(-) cross sections. The competitive endothermic reaction Cl(-) + CH(3)Br --> CH(3) + ClBr(-) rises from its thermochemical threshold at 1.9 +/- 0.4 eV, showing nearly symmetrically scattered products just above threshold and strong backward scattering above 3 eV associated with a second feature in the cross section.