Integration of individual TiO2 nanotube on the chip: Nanodevice for hydrogen sensing

Titania (TiO₂) exists in several phases possessing different physical properties. In view of this fact, we report on three types of hydrogen sensors based on individual TiO₂ nanotubes (NTs) with three different structures consisting of amorphous, anatase or anatase/rutile mixed phases. Different phases of the NTs were produced by controlling the temperature of post‐anodization thermal treatment. Integration of individual TiO₂ nanotubes on the chip was performed by employing metal deposition function in the focused ion beam (FIB/SEM) instrument. Gas response was studied for devices made from an as‐grown individual nanotube with an amorphous structure, as well as from thermally annealed individual nanotubes exhibiting anatase crystalline phase or anatase/rutile heterogeneous structure. Based on electrical measurements using two Pt complex contacts deposited on a single TiO₂ nanotube, we show that an individual NT with an anatase/rutile crystal structure annealed at 650 °C has a higher gas response to hydrogen at room temperature than samples annealed at 450 °C and as‐grown. The obtained results demonstrate that the structural properties of the TiO₂ NTs make them a viable new gas sensing nanomaterial at room temperature. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Raman and XRD study on brookite–anatase coexistence in cathodic electrosynthesized titania

Among the many methods developed for the synthesis of titanium dioxide, cathodic electrosynthesis has not received much attention because the resulting amorphous oxy‐hydroxide matrix demands a further thermal annealing step to be transformed into crystalline titania. However, the possibility of filling deep recessed templates by the control of the solid–liquid interface makes it a potentially suitable technique for the fabrication of porous scaffolds for photovoltaics and photocatalysis. Furthermore, a careful control of the crystallization process enables the growth of larger grains with lower density of grain boundaries, which act as electron traps that slow down electronic transport and promote charge recombination. In this report, well crystallized titania deposits were obtained by thermal annealing of amorphous deposits fabricated by cathodically assisted electrosynthesis on indium‐tin oxide (ITO)substrates. The combined use of Raman spectroscopy and X‐ray diffraction showed that the crystallization process is more intricate than previously assumed. It is shown that the amorphous matrix evolves into a rutile‐free mixture of brookite and anatase at temperatures as low as 200 °C that persists up to 800 °C, when pure anatase dominates. The amount of brookite in the brookite–anatase mixture reaches a maximum at 400 °C. This very simple method for obtaining a brookite–anatase mixture and the ability to tune their proportions by thermal annealing is a promising alternative whose potential for solar cells and photocatalysis deserves a careful evaluation. Copyright © 2011 John Wiley & Sons, Ltd.     

Charge‐transfer‐induced doping at an electron donor (α‐sexithiophene)/acceptor (C60) interface and mobility improvement

We studied various aspects relating to surface charge‐transfer‐induced doping at an organic/organic interface using in situ electrical measurements with a field‐effect transistor (FET) during the formation of the electron donor/acceptor interface. Adsorption of the electron‐accepting molecules (C₆₀) on top of the electron donating molecules (α‐6T) led to an increase in the FET hole mobility in an α‐6T film. Under illumination, the FET hole mobility in the α‐6T film with C₆₀ deposition was significantly increased in comparison with that in the dark due to exciton dissociation at the C₆₀/α‐6T interface, resulting in a large threshold voltage shift. The origin of the mobility increase is explained by the multiple trapping and release (MTR) model in which the mobility is determined by the carrier density. Various phenomena relevant to charge transfer and charge transport at the organic/organic interface are reported and their origins are discussed. (© 2014 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Investigation on SERS of different phase structure TiO2 nanoparticles

In this paper, anatase and rutile TiO₂ nanoparticles as well as their mixed crystal phase structure TiO₂ nanoparticles were synthesized by a sol‐hydrothermal method, and were served as active substrates for surface‐enhanced Raman scattering (SERS) study. The results show that the 4‐mercaptobenzoic acid probe molecules exhibit different degree SERS enhancements on the surface of different phase structure TiO₂ nanoparticles. The mixed crystal structure TiO₂ with an appropriate proportion of anatase and rutile phase is favourable to SERS enhancement of adsorbed molecules. These are mainly attributed to the contributions of the TiO₂‐to‐molecule charge transfer mechanism and the mixed crystal effect. Copyright © 2015 John Wiley & Sons, Ltd.     

A microscopy study of the effect of heat treatment on the structure and properties of anodised TiO2 nanotubes

Titanium oxide (TiO₂) nanotubes prepared by anodisation of titanium in an aqueous electrolyte and glycerol have been heat treated in the temperature range 200-600 °C to control the conversion of the amorphous structure to nano-crystalline anatase and rutile. The phase changes have been monitored are observed at lower temperatures (100 °C or more) than previously reported. The sensitivity of the different techniques, each of which depends on the size of the crystalline phase, can explain the discrepancy with previous results. Transmission electron microscopy (TEM) has shown the phase changes which have occurred and which have been reported in an earlier publication; phenomena such as the collapse of the structures are explained. The TEM results are consistent with the Raman and XRD data, apart from the transformation temperatures, and also shed light on the nature of an amorphous phase found on the surfaces of the nanotubes.     

Resonance Raman spectroscopic study for radial vibrational modes in ultra‐thin walled TiO2 nanotubes

The study reports the observation of radial vibrational modes in ultra‐thin walled anatase TiO₂ nanotube powders grown by rapid breakdown anodization technique using resonant Raman spectroscopic study. The as‐grown tubes in the anatase phase are around 2–5 nm in wall thickness, 15–18 nm in diameter and few microns in length. The E_{g(ν1,ν5,ν6)} phonon modes with molecular vibrations in the radial direction are predominant in the resonance Raman spectroscopy using 325 nm He–Cd excitation. Multi‐phonons including overtones and combinational modes of E_{g(ν1,ν5,ν6)} are abundantly observed. Fröhlich interaction owing to electron–phonon coupling in the resonance Raman spectroscopy of ultra‐thin wall nanotubes is responsible for the observation of radial vibrational modes. Finite size with large surface energy in these nanotubes energetically favor only one mode, B_1g(ν4) with unidirectional molecular vibrations in the parallel configuration out of the three Raman modes with molecular vibration normal to the radial modes. Enhanced specific heat with increasing temperatures in these nanotubes as compared to that reported for nanoparticles of similar diameter may possibly be related to the presence of the prominent radial mode along with other energetic phonon mode. The findings elucidate the understanding of total energy landscape for TiO₂ nanotubes. Copyright © 2015 John Wiley & Sons, Ltd.     

A study on photo-generated charges property in highly ordered TiO2 nanotube arrays

In this study TiO₂ nanotube arrays were fabricated by potentiostatic anodization of titanium sheet. The X-ray diffraction (XRD) pattern and field emission scanning electron microscopy (FE-SEM) image indicated the TiO₂ nanotube arrays were of pure anatase form and highly ordered. The properties of the photo-generated charges in the nanotube arrays were investigated by transient photovoltage (TPV) technique and surface photovoltage (SPV) technique based on lock-in amplifier with dc bias, in comparison with the commercial powder derived film. The separation processes of the photo-induced charges in the system of TiO₂ nanotubes on Ti have been demonstrated to be correlated with the incident light intensity, surface trapping states, and the interfacial electric field between Ti and TiO₂. The results also show that the highly ordered nanotube film could generate much stronger SPV responses under external electric field than the commercial powder derived film.     

Ultrahigh‐Density Plasmonic‐Nanoparticle‐Sensitized Semiconductor Photocatalysts Profit from Cooperative Light Harvesting and Charge Separation Processes: Experiments,Simulations, and Multifunctional Plasmonics

Here, a controlled synthesis of remarkable 3D photocatalysts is presented that is composed of ultrahigh‐density unaggregated plasmonic Au nanoparticles (AuNPs) chemically bound to vertically aligned ZnO nanorod arrays (ZNA) through bifunctional molecular linkers. Experimental probes and electromagnetic simulations of electron transfer and localized plasmonic coupling processes are exploited to gain insight into the underlying light‐irradiation‐induced interactions in the 3D ZNA–AuNPs photocatalysts. Highly dense AuNPs on ZNA surfaces act as sinks for the storage of UV‐generated electrons, which promote the separation of charge carriers and create numerous photocatalytic reaction centers. Furthermore, 3D finite‐difference time domain simulation indicates that significant visible light confinement and enhancement around the ZNA–AuNPs interfacial plasmon “hot spots” contribute to efficient conversion of light energy to electron‐hole pairs. Significantly, in comparison with the bare ZNA, the 10‐nm‐sized AuNPs‐decorated ZNA exhibits 10.6‐fold enhanced photoreaction rate in the entire UV–vis region. Moreover, various novel hybrid structures based on the plasmonic AuNPs and diverse nanostructures (films, powdered nanorods, mesoporous, and nanotubes) or functional materials (multiferroic BiFeO₃, CuInGaSe₂ absorber layers, and photoactive TiO₂) are successfully constructed using the present synthesis methodology. It may stimulate the progress in materials science toward the synthesis of multifunctional plasmonic heterostructures or devices.     

Effect of heat treatment on morphology, crystalline structure and photocatalysis properties of TiO2 nanotubes on Ti substrate and freestanding membrane

Highly ordered titanium oxide (TiO₂) nanotubes were prepared by electrolytic anodization of titanium electrodes. Morphological evolution and phase transformations of TiO₂ nanotubes on a Ti substrate and that of freestanding TiO₂ membranes during the calcinations process were studied by scanning electron microscopy, transmission electron microscopy, and X-ray diffraction microscopy. The detailed results and mechanisms on the morphology and crystalline structure were presented. Our results show that a compact layer exists between the tubular layer and Ti substrate at 600 °C, and the length of the nanotubes shortens dramatically at 750 °C. The freestanding membranes have many particles on their tubes during calcinations from 450 to 900 °C. The TiO₂ nanotubes on the Ti substrate transform to rutile crystals at 600 °C, while the freestanding TiO₂ membranes retain an anatase crystal with increasing temperature to 800 °C. The photocatalytic activity of TiO₂ nanotubes on a Ti substrate annealed at different temperatures was investigated by the degradation of methyl orange in aqueous solution under UV light irradiation. Due to the anatase crystals in the tubular layer and rutile crystals in the compact layer, TiO₂ nanotubes annealed at 450 °C with pure anatase crystals have a better photocatalytic activity than those annealed at 600 °C or 750 °C.     

Optimisation of stability and charge transferability of ferrocene-encapsulated carbon nanotubes

Ferrocene-encapsulated carbon nanotubes (Fc@CNTs) became promising nanocomposite materials for a wide range of applications due to their superior catalytic, mechanical and electronic properties. To open up new windows of applications, the highly stable and charge transferable encapsulation complexes are required. In this work, we designed the new encapsulation complexes formed from ferrocene derivatives (FcR, where R = –CHO, –CH₂OH, –CON₃ and -PCl₂) and single-walled carbon nanotubes (SWCNTs). The influence of diameter and chirality of the nanotubes on the stability, charge transferability and electronic properties of such complexes has been investigated using density functional theory. The calculations suggest that the encapsulation stability and charge transferability of the encapsulation complexes depend on the size and chirality of the nanotubes. FcR@SWCNTs are more stable than Fc@SWCNTs at the optimum tube diameter. The greatest charge transfer was observed for FcCH₂OH@SWCNTs and Fc@SWCNTs since the Fe d levels of FcCH₂OH and Fc are nearly equal and close to the Fermi energy level of the nanotubes. The obtained results pave the way to the design of new encapsulated ferrocene derivatives which can give rise to higher stability and charge transferability of the encapsulation complexes.     

Fabrication and characterization of CdS-sensitized TiO<Subscript>2</Subscript> nanotube photoelectrode

CdS quantum dot (Qd)-sensitized TiO₂ nanotube array photoelectrode is synthesised via a two-step method on tin-doped In₂O₃-coated (ITO) glass substrate. TiO₂ nanotube arrays are prepared in the ethylene glycol electrolyte solution by anodizing titanium films which are deposited on ITO glass substrate by radio frequency sputtering. Then, the CdS Qds are deposited on the nanotubes by successive ionic layer adsorption and reaction technique. The resulting nanotube arrays are characterized by scanning electron microscopy, X-ray diffraction (XRD) and UV–visible absorption spectroscopy. The length of the obtained nanotubes reaches 1.60 μm and their inner diameter and wall thickness are around 90 and 20 nm, respectively. The XRD results show that the as-prepared TiO₂ nanotubes array is amorphous, which are converted to anatase TiO₂ after annealed at 450 °C for 2 h. The CdS Qds deposited on the TiO₂ nanotubes shift the absorption edge of TiO₂ from 388 to 494 nm. The results show that the CdS-sensitized TiO₂ nanotubes array film can be used as the photoelectrode for solar cells.     

Doped single‐walled carbon nanotubes and low‐mobility graphene: impact of disorder and dopants on electronic magnetotransport

The impact of disorder introduced by intentional and unintentional (environmental) dopants on the charge transport has been investigated in boron‐ and nitrogen‐doped single‐walled carbon nanotubes, and in low‐mobility monolayer graphene. For doped single‐walled nanotubes a theoretically not predicted plateau‐like region and onsets of oscillatory behaviour in the conductance for boron‐ and nitrogen‐doped nanotubes were observed, respectively. The oscillatory behaviour suggests interplay between the dopants and the helical movement of charges along the tube due to the magnetic field. For low‐mobility graphene the simultaneous appearance of the filling‐factor 2 and 3 plateau was observed in the Quantum‐Hall regime. This is attributed to an electron‐spin–isospin interaction mediated through the high disorder. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Optical properties of TiO2 anatase - Carbon nanotubes composites studied by cathodoluminescence spectroscopy

Luminescence spectra obtained by electron bombardment (cathodoluminescence, CL) on TiO₂ (anatase)/carbon nanotubes (CNT) composite, show only one visible band at 498 nm, while the spectra taken from pure anatase samples show two bands at 498 and 545 nm. We demonstrate that the visible luminescence bands are originated by TiO₂ surface defects due to oxygen vacancies, and that this luminescence signal is independent of TiO₂ mineral form (anatase or rutile). Moreover we obtain that the 545 nm band quenching in TiO₂/CNT composites is caused by empty oxygen vacancies (OV) related to oxygen given from oxygen-rich pristine powder of carbon nanotubes. Our conclusions are also supported by X-ray photoelectron spectroscopy (XPS), SEM analysis and energy dispersed X-ray measurements (EDX). Furthermore we can confirm that the NIR TiO₂ luminescence emission is linked only to the presence of Ti rutile form as described in several works in literature.     

Charge transfer effects on the Fermi surface of Ba0.5K0.5Fe2As2

Ab‐initio calculations within density functional theory are performed to obtain a more systematic understanding of the electronic structure of iron pnictides. As a prototypical compound we study Ba_0.5K_0.5Fe₂As₂ and analyze the changes of its electronic structure when the interaction between the Fe₂As₂ layers and their surrounding is modified. We find strong effects on the density of states near the Fermi energy as well as the Fermi surface. The role of the electron donor atoms in iron pnictides thus cannot be understood in a rigid band picture. Instead, the bonding within the Fe₂As₂ layers reacts to a modified charge transfer from the donor atoms by adapting the intra‐layer Fe‐As hybridization and charge transfer in order to maintain an As^3‐ valence state.     

Charge carrier decay and diffusion in organic–inorganic CH3NH3PbI3–xClx perovskite based solar cell

In recent years, organic–inorganic lead halides attracted widespread interest, mainly due to their impressive photoconversion properties and low‐cost solution processing. In this study, we employed small amplitude transient photovoltage and photocurrent spectroscopy to investigate charge transport and recombination properties of perovskite CH₃NH₃PbI_3–xCl_x solar cell under realistic light harvesting conditions (<1 sun). Cell structure resembles outlay commonly found in organic photovoltaics, with perovskite absorber being sandwiched between two thin layers of organic polymers. Tested device displayed high power conversion efficiency (10.3%), good fill factor and negligible hysteresis effect. Fundamental device parameters were characterized at various open‐circuit voltages (V_oc) by examination of small voltage and current perturbations created by the low intensity pulsed laser excitations. The obtained results exhibit long charge carrier lifetimes and fast charge transport over the full range of applied optical bias, as well as remarkable diffusion lengths exceeding 1 μm. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Template synthesis of well-aligned titanium dioxide nanotubes

TiO₂ nanotubes of the anatase form have been synthesized by sol-gel chemical method using anodic aluminum oxide (AAO) as a template. Transmission electron microscopy (TEM), scanning electron microscopy (SEM), and X-ray diffraction were used to investigate the structure and morphology of the TiO₂ nanotubes. The results showed that TiO₂ nanotubes obtained are highly ordered and uniform. The diameter and length of the obtained nanotubes were determined by the pore size and the thickness of AAO template. It was found that through control of immersion time of AAO membrane in sol, both tubules and fibrils can be prepared. PACS 61.46.+w     

Comparative charge transfer studies in nonmetallated and metallated porphyrin fullerene dyads

Single material organic solar cells become an interesting area of research to overcome the challenges with efficient charge separation efficiencies in conventional organic solar cells. In this article, we have synthesized nonmetallated and metallated porphyrin‐fullerene dyad materials (H2P‐C60 and ZnP‐C60, respectively) with simple structure, comprehensively studied their charge transfer mechanism, and established a proof of concept that nonmetallated porphyrin‐fullerene dyads are better candidates to be used in organic solar cells compared with metallated dyads. Absorption and electrochemical analysis revealed the ground state electronic interactions between donor‐acceptor moieties in both types of dyads. Driving force (?ΔG^o_ET) for intramolecular electron transfer process was calculated by first oxidation and reduction potentials of dyads. The excited state electronic interactions were characterized by time‐resolved fluorescence and pump‐probe transient absorption experiments. Strong fluorescence quenching of porphyrin along with reduced lifetimes in dyads due to deactivation of singlet excited states by photoinduced charge transfer process between porphyrin/Zn‐porphyrin core and fullerene in different polarity solvents was observed. Transient absorption spectroscopy was also applied to identify the transient spectral features, ie, cationic (H2P⁺/ZnP⁺) and anionic (C₆₀^?) radicals formed because of the charge separation in both types of dyads. Finally, organic solar cell device was also fabricated using the dyads. We obtained higher V_oc, J_sc, and fill factor in single material organic solar cell using H2P‐C60 compared to previous reports.     

Charge‐transfer behavior of polyaniline single wall carbon nanotubes nanocomposites monitored by resonance Raman spectroscopy

Highly dispersed nanocomposites of polyaniline(PANI) and oxidized single wall carbon nanotubes(SWNTs) have been prepared using dodecylbenzenesulfonic acid as dispersant. The materials were characterized via resonance Raman and electronic absorption spectroscopies. The behavior of the composites as a function of the applied potential was also investigated using in situ Raman electrochemical measurements. The results obtained at E_laser = 1.17 eV suggest that a charge‐transfer process occur between PANI and semiconducting nanotubes for samples where the metallic tubes are previously oxidized. The spectroelectrochemical data show that the presence of SWNTs prevents the oxidation of PANI rings. Copyright © 2010 John Wiley & Sons, Ltd.     

Anatase nanotubes as support for platinum nanocrystals

Anatase nanotubes were successfully produced via the sol–gel process involving organic titanium precursors and multi-walled carbon nanotubes as template. Controlled heat treatments were carried out in order to remove any solvents and to crystallise the initial amorphous titania coating into anatase. In order to use these structures for catalyst support, platinum particles were formed by the impregnation with hexachloroplatinic acid and subsequent calcination and reduction to obtain a final loading of 4 wt% platinum. This impregnation step was carried out either with the carbon nanotube former still present with subsequent heat treatment to remove the carbonaceous template (sample A) or with the carbon nanotube former already removed (sample B). The materials were characterised by X-ray diffraction, scanning electron microscopy and transmission electron microscopy.     

Effect of Polarization Temperature on the Chain Segment Motion and Space Charge Detrapping in Polyamide 610 Film Electrets

The effect of polarization temperature on the chain segment motion and charge trapping and detrapping in polyamide 610 films has been investigated by means of thermally stimulated depolarization current (TSDC) and wide-angle X-ray diffraction (WAXD). A small part of the amorphous phase of quenched polyamide 610 changes into the crystalline state with increasing polarization temperature. There are three current peaks (named α, ρ₁, and ρ₂ peak, respectively) in the TSDC spectra. The α peak corresponds to the glass transition, the ρ ₁ peak is attributed to space charge trapped in the amorphous phase, and interphase between crystalline and amorphous phases, and the ρ ₂ peak originates from space charge trapped in the crystalline phase. By analyzing the characteristic parameters of these peaks, it was found that the increase of polarization temperature induced a decrease of the chain segment mobility and promoted the creation of structural traps in polyamide 610. The decrease of the chain segment mobility in the amorphous phase made the intensity of the α peak weak and the activation energy increased. The higher the polarization temperature, the higher the degree of crystallinity and the more charge carriers trapped in the crystalline phase. So, the increase of polarization temperature made the intensity of the ρ ₂ peak strong and increased the stability of trapped charge in the crystalline phase. The increase of polarization temperature also made the intensity of the ρ ₁ peak strong and decreased the stability of trapped charge in the amorphous phase and interphase.