一维无序结构光子晶体的能带特性研究

通过引入结构参数a，深入研究了具有无序结构的一维二元光子晶体的能带特性。研究发现，无序结构有效拓宽了光子带隙，与均匀结构相比，拓宽率达到200％以上；无序一维光子晶体表现出从可见到红外很宽区域的高反射特性。本文还计算和分析了入射角和无序度D对光子晶体带隙的影响。     

Fabrication and optical properties of 3D composite photonic crystals of core-shell structures

Three-dimensional (3D) composite colloidal photonic crystals with SiO₂ core and ZnO shell were fabricated on borosilicate glass (BSG) substrate by a two-stage deposition method. Scanning electron microscopy (SEM) measurements show that both the pre-deposited SiO₂ and SiO₂/ZnO core-shell structures are oriented with their (1 1 1) axes parallel to the substrates. Optical measurement reveals that the periodic arrays exhibit a photonic band gap in the (1 1 1) direction. The optical properties of SiO₂/ZnO core-shell structures strongly depend on the size dispersions of colloidal spheres and the intrinsic defects in the sample.     

胶体晶体和基于胶体晶体的纳米结构

胶体晶体及基于胶体晶体的各种纳米结构的制备和物理性质是近来物理学和材料科学共同关注的一个热点，文章简要阐述了胶体颗粒间的基本相互作用，着重介绍了各种胶体晶体的制备方法；结合我们近期的工作，综合评述了胶体晶体在二维纳米颗粒阵列、二维有序孔单层膜及三维光子晶体等纳米结构材料研究中的应用，并对未来的发展进行了展望。     

III–V based-semiconductor photonic crystals

Three-dimensional (3D) and two-dimensional (2D) photonic crystals based on III–V semiconductors are described. On the 3D photonic crystals, the development of complete photonic crystals at optical wavelengths and their applications to ultrasmall optical integrated circuits including 3D sharp bend waveguide are described. On the 2D photonic crystals, two-unique device and/or phenomena are demonstrated.     

Optical properties of one-dimensional photonic crystals fabricated by photo-electrochemical etching of silicon

The optical properties of one-dimensional photonic crystals (1D PCs), fabricated by electrochemical etching of periodic wall arrays on n-type (100) Si substrates, are investigated in this study. Several 1D PCs were fabricated with lattice periods varying from 4 to 7 μm and with trench depths in the range 160–210 μm. In-plane reflection spectra of the photonic structures at different depths were registered over a wide spectral range of 1.5–15 μm using Fourier Transform Infra-Red (FTIR) micro-spectroscopy. Some of the features observed in the reflection spectra of the structures investigated are believed to be as a result of interface roughness. A corrugated side-wall surface, an artifact of the fabrication technique, results in the degradation of optical reflection characteristics, principally mainly in the near IR spectral range, and the emergence of optical anisotropy. As a result of the periodicity, modulation of the reflection spectra, that is, the difference between the maxima and minima of the interference fringes, reached a value of 95% in the mid-infrared. The optical properties of the structures investigated indicate that they show promise for microphotonics applications.     

Zero-averaged refractive-index gaps extension by using photonic heterostructures containing negative-index materials

We show theoretically that the frequency range of the zero-averaged refractive-index gap can be substantially extended in a photonic heterostructure containing negative-index materials. This photonic heterostructure consists of different one-dimensional (1D) photonic crystals. The constituent 1D photonic crystals have to be properly chosen in such a way that their zero-averaged refractive-index gap of the adjacent photonic crystals overlap each other.     

Silicon and porous silicon mid-infrared photonic crystals

A 3D silicon micromachining method based on proton beam writing combined with electrochemical anodization of p-type silicon enables fabrication of mid-infrared photonic crystals made of silicon and porous silicon. Here, example structures of silicon 1D and 2D photonic crystals are demonstrated. Progress and problems of fabricating 3D photonic crystals made of silicon are discussed. The strategy of fabricating photonic crystals purely made of porous silicon, and the characterization method of all these mid-infrared structures, are discussed. Due to the flexibility of this fabrication method, photonic devices and integrated photonic circuits may be built on a single chip, for which two 2D silicon photonic crystals with one on top of the other are demonstrated.     

Whispering gallery mode propagation in photonic crystals in front of subwavelength slit arrays: Interplay with extraordinary transmission

We numerically study the propagation of light in 2D photonic crystals (PC) made of infinite cylinders of high refractive index, via the excitation of their morphological dependent resonances, in the presence of metallic arrays of subwavelength slits, either corrugated or not, that may produce extraordinary transmission. In this way, we confirm and illustrate previous theoretical findings on PCs and show new effects when combined with slits. Among them, we show that the whispering gallery mode excitation in the PC couples dominates the transmission of the slit arrays alone. Appropriate design of the system parameters and the illumination conditions, selects the transport and confinement of energy.     

光子晶体对太赫兹波的调制特性研究

利用传输矩阵方法研究了掺杂半导体n-GaAs/聚碳酸脂一维光子晶体的太赫兹波透射谱.研究结果发现,与一般由两种介电材料组成的一维光子晶体不同,由于掺杂半导体中自由载流子对太赫兹波存在较强的吸收,所以这种材料组成的一维光子晶体除可形成光子带隙外,还可以增强n-GaAs对太赫兹波的透射.同时还提出了一种基于这种一维光子晶体的太赫兹波调制器,通过外加电压控制半导体中电子浓度的大小可实现对太赫兹透射波幅度的调制. 关键词： 掺杂半导体光子晶体 太赫兹波 太赫兹波的调制     

Photonic band gap engineering in 2D photonic crystals

The polarization-dependent photonic band gaps (TM and TE polarizations) in two-dimensional photonic crystals with square lattices composed of air holes in dielectric and vice versa i.e., dielectric rods in air, using the plane-wave expansion method are investigated. We then study, how the photonic band gap size is affected by the changing ellipticity of the constituent air holes/dielectric rods. It is observed that the size of the photonic band gap changes with changing ellipticity of the constituent air holes/dielectric rods. Further, it is reported, how the photonic band gap size is affected by the change in the orientation of the constituent elliptical air holes/dielectric rods in 2D photonic crystals.     

Simplified design of low-loss and flat dispersion photonic crystal waveguide on SOI

A low-loss and flat dispersion line-defect photonic crystal waveguide is proposed with a simplified waveguide-design on silicon-on-insulator (SOI) based on hexagonal lattice of 2D photonic crystals. A propagation loss of 3.6 dB/mm and flat dispersion over a large wavelength band is reported with an easy-to-implement design without disturbing the periodicity (keeping lattice constant and hole diameter fixed) in the line-defect photonic crystals. The combined effect of photonic crystals (in-plane periodicity) and the vertical layers on SOI results in efficient waveguiding and dispersion characteristics.     

大带隙二维三角格子光子晶体结构参数的优化设计

光子晶体结构设计优化是理论研究的一个重要内容.运用平面波展开法对圆柱、方柱及正六边柱构造的二维三角格子光子晶体的禁带进行仿真计算,讨论了介质材料分别为GaAs、Si和Ge情况下,柱子形状、旋转角度、填充比的变化对完全光子禁带的影响.发现:对于二维三角格子光子晶体,相对于介质柱,空气柱更易获得完全光子禁带;而相对于圆柱及...     

非磁化等离子体光子晶体的禁带周期特性研究

用时域有限差分法（Finite-Different Time-Domain,FDTD）中的电流密度卷积（Current Density Convolution,JEC）算法讨论了一维非磁化等离子体光子晶体的禁带周期特性,分析了非磁化等离子光子晶体的周期结构和等离子体参量对其禁带周期的影响.以微分高斯脉冲为激励源,用电磁波通过非磁化等离子体光子晶体后所得的透射系数来讨论非磁化等离子体光子晶体的禁带周期特性.结果表明,通过改变参量可以获得不同的禁带周期特性.     

New approaches for the fabrication of photonic structures of nonlinear optical materials

We revisited two different strategies to fabricate 1D photonic crystals of nonlinear optical dielectric materials based on ultrafast laser ablation of the surface of an RbTiOPO₄ crystal, and selective etching of ferroelectric domains of the surface of a periodically poled LiNbO₄ crystal. We evaluated their behaviour as Bragg diffraction gratings. We also presented the recent advances we developed in a new procedure of fabrication of 2D and 3D photonic crystals of KTiOPO₄ (KTP) grown on the surface of a KTP substrate by liquid phase epitaxial means within the pores of a silicon macroporous template. Optical, structural, morphological, and compositional characterization for the photonic crystals produced through this technique are presented.     

Design,nano-fabrication and analysis of near-infrared 2D photonic crystal air-bridge structures

Selective wet etching is a technique that allows fabrication of freely suspended thin slabs in epitaxial heterostructures. This technique, together with high-aspect ratio dry etching, is used to create two-dimensional (2D) photonic crystals for near-infrared wavelengths in thin suspended AlGaAs membranes. The active photonic crystal areas contain hexagonal arrays of cylindrical holes completely perforating the membrane. For an appropriate selection of the slab thickness and the lattice parameter, dispersion relations for the guided modes are explicitly computed by solving the Maxwell equations in a geometry containing a 2D photonic crystal defined in the core layer of a dielectric waveguide structure. Measurements of the spectral transmittance in air-bridge samples show a narrow 30-dB-deep stop band for TM polarized incident light. The spectral position of the stop band shows a good agreement with theoretical band structure calculations when also the quasi-guided resonant modes outside the light cone are taken into account.     

Geometrical freedom for constructing variable size photonic bandgap structures

In order to study the design flexibility of photonic bandgap structures, we investigate different examples of 1D traditional Bragg layers and 2D photonic crystals. We have also considered a simple case of 3D woodpile structures. It turns out that in systems with large gaps, the evanescent waves penetrate into the bulk only distances comparable to one lattice constant. Therefore confinement of light can also be achieved without long range order, which leads to the introduction of novel photonic bandgap designs. Adhering to some constraints, the changes in the photonic bandgap in disordered structures are negligible. The important quantity to characterize the presence or absence of modes is the local photonic density of states, however bandgap phenomena in size and position disordered arrangements can also be verified with plane wave supercell calculations as well as finite difference time domain techniques.     

Defect modes in silver-doped photonic crystals made by holography using dichromated gelatin

The defect mode in silver-doped photonic crystals is investigated. 1D and 3D photonic crystals were made by holography using dichromated gelatin mixed with silver nitrate. By controlling the concentration of the silver nitrate, the defect mode was observed in the bandgaps of the holographic photonic crystals. The numerical simulations were made, and the results showed the consistency with the experimental observations.     

高质量三维光子晶体的实验制备及理论分析

对压强控制自组装法进行了改进,采用了密封硅胶颗粒的强吸水装置,为光子晶体样品的制备提供了一个稳定的温度、湿度和压强环境.将温度、压强分别控制在35 ℃、45 mmHg,利用直径为260 nm的聚苯乙烯胶体球进行了高质量三维光子晶体样品的制备.从理论计算和实验测量等方面对制备的光子晶体样品的结构、质量和性能进行了对比分析,结果表明,利用该实验装置进行光子晶体样品的制备时,可重复性高;制备的光子晶体样品具有较为完美有序的密堆结构,质量较好;在光子晶体样品的Г L方向有深且窄的光子带隙和陡峭的带隙边沿.光子带隙深度为83%,宽度为0.073,带隙边沿陡峭度为8%/nm,这为超快全光开关等先进的光学设备的研究奠定了基础.     

Arbitrary structuring of two-dimensional photonic crystals by use of phase-only Fourier gratings

The computer-generated holography technique is applied to the structuring of two-dimensional (2D) photonic crystals with inherently embedded arbitrary defects. The technique uses phase-only Fourier gratings as a generator of spot arrays in the focal plane, such that a single exposure produces a 2D array of focused spots with desired defects or modifications in the lattice structure. We demonstrate several types of large-area 2D lattice structures with square, hexagonal, or hybrid lattices embedded with point and (or) line defects. Scanning the Fourier plane in the depth direction throughout multiphoton polymerization media allows 3D lattices with stacked defect layers to be formed.     

A method of designing photonic crystal grating slow-wave circuit for Ribbon--Beam microwave travelling wave amplifiers

A method of designing a photonic crystal grating slow-wave circuit in which the cylinders of the 2D photonic crystals dot on a cross-sectional plane is established by calculating the band structures of the 2D photonic crystals, and the eigenfrequency of the equivalent waveguide grating. For calculating the band structures, the eigenvalue equations of the photonic crystals in the system of photonic crystal grating slow-wave circuit are derived in a special polarization mode. Two examples are taken to show the method. The design result is validated by the scattering parameters of the same circuit. The result indicates that there exists no photonic band gap if the metal gratings do not extend into the photonic crystals; the design of the circuit without the metal gratings extending into the photonic crystals is less flexible than that with the metal gratings extending into the photonic crystals.