Re-charging the luminescence states in CdSe/ZnS quantum dots at the conjugation to Osteopontin antibodies

The paper presents the original study of photoluminescence (PL) and Raman scattering spectra of core–shell CdSe/ZnS quantum dots (QDs) covered by the amine-derivatized polyethylene glycol (PEG) with luminescence interface states. First commercially available CdSe/ZnS QDs with emission at 640 nm (1.94 eV) covered by PEG polymer have been studied in nonconjugated states. PL spectra of nonconjugated QDs are characterized by a superposition of PL bands related to exciton emission in a CdSe core and to the hot electron–hole recombination via high energy luminescence states. The study of high energy PL bands in QDs at different temperatures has shown that these PL bands are related to luminescence interface states at the CdSe/ZnS or ZnS/polymer interface. Then CdSe/ZnS QDs have been conjugated with biomolecules—the Osteopontin antibodies. It is revealed that the PL spectrum of bioconjugated QDs changed essentially with decreasing hot electron–hole recombination flow via luminescence interface states. It is shown that the QD bioconjugation process to Osteopontin antibodies is complex and includes the covalent and electrostatic interactions between them. The variation of PL spectra due to the bioconjugation is explained on the basis of electrostatic interaction between the QDs and biomolecule dipoles that stimulates re-charging QD interface states. The study of Raman scattering of bioconjugated CdSe/ZnS QDs has confirmed that the antibody molecules have the electric dipoles. It is shown that CdSe/ZnS QDs with luminescence interface states are promising for the study of bioconjugation effects with specific antibodies and can be a powerful technique in biology and medicine.     

Bright blue emission from Te-doped ZnS nanowires

Optical properties of Te-doped ZnS (ZnS:Te) nanowires (NWs) synthesized by a thermal chemical vapor deposition method were investigated by cathodeluminescence and photoluminescence (PL) measurements. ZnS:Te NWs exhibit the blue emission with the maximum peak at ∼440 nm at room temperature. We calculated Te-induced states on the valence band and conduction band in ZnS bulk crystal compared with PL peaks of ZnS:Te NWs. Temperature-dependent PL indicated that the activation energy of electron confined in ZnS:Te NWs is 85 meV. Blue light-emitting dot matrix displays were also fabricated using ZnS:Te NWs. This result suggested that ZnS:Te NWs could be applied as a blue-color-emitter on display devices.     

Shell thickness dependence of exciton trapping in colloidal core/shell nanorods

We quantitatively investigated, by time-resolved photoluminescence (PL) spectroscopy, the shell thickness dependence of exciton trapping and its effects on the PL quantum yield (QY) in colloidal CdSe/CdS/ZnS core/shell quantum rods. The defects passivation, due to a thin shell (0.6 monolayer), leads to a 2 times reduction of the trapping from both emitting and high-energy excited states, thus explaining the observed 4.3 times increase of the PL QY. Moreover, the QY decrease in the thick shell (1.3 monolayers) sample is fully explained in terms of increased trapping from the emitting states, which is ascribed to new defects caused by the strain relaxation at the core-shell interface.     

核壳结构CdS/ZnS纳米微粒的制备与光学特性

用微乳液法制备CdS纳米微粒 ,以ZnS对其进行表面修饰 ,得到具有核壳结构的CdS/ZnS纳米微粒 .采用X射线衍射 (XRD)、透射电镜 (TEM )表征其结构、粒度和形貌 ,紫外 可见吸收光谱 (UV)、光致发光光谱(PL)表征其光学特性 .制得的CdS近似呈球形 ,直径为 3.3nm ;以XRD和UV证实了CdS/ZnS核壳结构的实现 .研究了不同ZnS壳层厚度对CdS纳米微粒光学性能的影响 ,UV谱表明随着壳层厚度的增加纳米微粒的吸收带边有轻微的红移 ,同时短波吸收增强 ;PL谱表明壳层ZnS的包覆可减少CdS纳米微粒的表面缺陷 ,带边直接复合发光的几率增大 ,具有合适的壳层厚度时发光效率大大提高 .     

Er/Yb共掺体系的光致荧光行为及相关物理过程研究

采用固相反应方法，制备了Er₂O₃浓度固定为0.5mol%，Yb₂O₃浓度范围为0.0mol%—5.5mol%的Er/Yb共掺激光玻璃.通过吸收光谱、光致荧光光谱和上转换荧光光谱，研究了Yb₂O₃浓度对Er³⁺荧光特性的影响，并探讨了相关的物理机制.研究结果表明：Yb³⁺共掺对Er³⁺的⁴ 关键词： Er/Yb共掺 光致荧光 能量传递 合作上转换     

Photoluminescence Characteristics of ZnCuInS-ZnS Core-Shell Semiconductor Nanocrystals

The photoluminescence(PL) characteristics of ZnCuInS quantum dots(QDs) with varying ZnS shell thicknesses of 0, 0.5, and 1.5 layers are investigated systemically by time-correlated single-photon counting measurements and temperature-dependent PL measurements. The results show that a ZnS shell thickness of 1.5 layers can effectively improve the PL quantum yield in one order of magnitude by depressing the surface trapping states of the core ZnCuInS QDs at room temperature. However, the PL measurements at the elevated temperature reveal that the core-shell nanocrystals remain temperature-sensitive with respect to their relatively thin shells.The temperature sensitivity of these small-sized single-layered core-shell nanocrystals may find applications as effective thermometers for the in vivo detection of biological reactions within cells.     

低强度飞秒激光激发下CdTe和CdTe/CdS核壳量子点的荧光上转换研究

利用400 nm和800 nm不同波长的低强度飞秒激光,对CdTe和CdTe/CdS核壳量子点溶胶进行激发,研究其稳态和时间分辨荧光性质.800 nm飞秒激光激发下,CdTe和CdTe/CdS核壳量子点产生上转换发光现象,上转换荧光峰与400 nm激发下的荧光峰相比蓝移最多达15 nm,而且蓝移值与荧光量子产率有关.变功率激发确认激发光功率与上转换荧光强度间满足二次方关系,时间分辨荧光的研究表明荧光动力学曲线服从双e指数衰减.提出表面态辅助的双光子吸收模型是低激发强度上转换发光的主要机理.CdTe和CdT 关键词： CdTe量子点 CdTe/CdS核壳量子点 时间分辨荧光 上转换荧光     

The optical properties and energy transition process in nanocomposite of polyvinyl-pyrrolidone polymer and Mn-doped ZnS

This study has been carried out on the optical properties of polyvinyl-pyrrolidone (PVP), the energy transition process in nanocomposite of PVP capped ZnS:Mn nanocrystalline and the influence of the PVP concentration on the optical properties of the PVP capped ZnS:Mn nanocrystalline thin films synthesized by the wet chemical method. The microstructures of the samples were investigated by X-ray diffraction, the atomic absorption spectroscopy, and transmission electron microscopy. The results showed that the prepared samples belonged to the sphalerite structure with the average particle size of about 2–3 nm. The optical properties of samples are studied by measuring absorption, photoluminescence (PL) spectra and time-resolved PL spectra in the wavelength range from 200 to 700 nm at 300 K. From data of the absorption spectra, the absorption edge of PVP polymer was found about of 230 nm. The absorption edge of PVP capped ZnS:Mn nanoparticles shifted from 322 to 305 nm when the PVP concentration increases. The luminescence spectra of PVP showed a blue emission with peak maximum at 394 nm. The luminescence spectra of ZnS:Mn–PVP exhibits a blue emission with peak maximum at 437 nm and an orange–yellow emission of ion Mn²⁺ with peak maximum at 600 nm. While the PVP coating did not affect the microstructure of ZnS:Mn nanomaterial, the PL spectra of the PVP capped ZnS:Mn samples were found to be affected strongly by the PVP concentration.     

Influence of surfactant structures in luminescence enhancement dynamics during nucleation and growth of aqueous ZnS nanoparticles and their photoactivation due to illumination with UV/visible light

Nanostructured semiconductor architectures have attractive optical properties mainly including bright photoluminescence (PL) resulting from the radiative recombination of charge carriers on surface states. Various approaches have been employed for the modification of surface states of these nanostructures to design new nanomaterials with enhanced PL primarily in aqueous medium to enable their applications in biological samples. Here, we report the varying efficiencies of three commercial surfactants viz. cetyltrimethylammonium bromide (CTAB), cetyltrimethylammonium chloride (CTAC) and cetylpyridinium chloride (CPyC) on the dynamics of PL emission enhancement during initial growth and Ostwald ripening of ZnS nanoparticles (NPs). The counterion has been estimated to behave differently to govern the PL enhancement. The exceptionally high tendency of CPyC in PL enhancement has been assigned to participation of π-electrons of pyridinium ring. The impact of UV-light in photoactivation of surfactant stabilized ZnS NPs has been utilized in exploring significance of surfactants in improving the surface emitting states in water soluble semiconductor NPs.     

Influences of capping molecules on optical properties of nanocrystalline ZnS:Cu

ZnS:Cu nanocrystals capped with different capping molecules have been successfully synthesized by a simple aqueous method. The prepared nanocrystals were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy dispersive analysis by X-rays (EDAX). The surface characterization of the nanocrystals was done by FTIR spectroscopy. The effect of capping agents on absorption and photoluminescence (PL) spectra of the ZnS:Cu nanocrystals was studied. A blue shift of the absorption peaks was observed and attributed to a quantum confinement effect, which increases the band gap energy. The photoluminescence spectra of the capped ZnS:Cu nanocrystals showed a broad peak in the range of 460–480 nm. The intensity of the PL spectra strongly depended on the capping agents.     

Growth and optical characterization of single quantum well structure of submonolayer ZnS/ZnTe

Single quantum wells of submonolayer ZnS/ZnTe were grown between ZnTe layers using hot wall epitaxy method with fast-movable substrate configuration. As ZnS well widths decrease from 1 to 0.15 monolayer, the photoluminescence peaks shift to higher energies from 2.049 to 2.306 eV, and the photoluminescence intensities increase. As ZnS well width decrease, the PL spectra show the lower-energy tails and consequently the increased PL FWHMs. This is a result of a convolution of two PL peaks from two-dimensional and zero-dimensional quantum islands, supported by a still lived lower-energy peaks of zero-dimensional quantum islands above 50 K. The energy shift in the power dependence of photoluminescence spectra is proportional to the third root of the excitation density. These behaviors can be described by the formation of submonolayer type-II ZnS/ZnTe quantum well structure, and the coexistence of two-dimensional and one-dimensional islands in ZnS layers.     

Up-conversion luminescence via a below-gap state in GaAs/AlGaAs quantum wells

We observe a band-to-band photoluminescence (PL) of the well layers in GaAs/AlGaAs quantum well structures (hν_P = 1.56 eV) under below-gap excitation (BGE) with a Nd:YAG laser (hν_B = 1.17 eV) at 77 K. The origin of the up-conversion luminescence was inside the epitaxially grown well layers and is different from those reported in GaAs substrates. A detailed study of a two-wavelength excited PL was carried out by changing the density of both the BGE and the above-gap excitation (AGE) by a He–Ne laser (hν_A = 1.96 eV) individually. The up-conversion process corresponds to the increase in the PL intensity due to the BGE in two-wavelength excited PL, which reveals the mechanism of a cascade excitation via a below-gap state in quantum wells for the first time. A rate- equation analysis explained the measured BGE density dependence of the up-conversion luminescence.     

Green and red up-conversion emissions of Er–Yb Co-doped TiO2 nanocrystals prepared by sol–gel method

In this paper, green and red up-conversion emissions of Er³⁺–Yb³⁺ co-doped TiO₂ nanocrystals were reported. The phase structure, particle size and optical properties of Er³⁺–Yb³⁺ co-doped TiO₂ nanocrystals samples were characterized by using X-ray diffraction (XRD), transmission electron microscopy (TEM), UV–vis–NIR absorption spectra and photoluminescence (PL) spectra. Green and red up-conversion emissions in the range of 520–570 nm (²H_11/2, ⁴S_3/2→⁴I_15/2) and 640–690 nm (⁴F_9/2→⁴I_15/2) were observed for the Er³⁺–Yb³⁺ co-doped TiO₂ nanocrystals. The visible up-conversion mechanism and temperature dependence of up-conversion emission for Er³⁺ in TiO₂ nanocrystals were discussed in detail.     

Effect on photophysical properties of colloidal ZnS quantum dots by doping with cobalt, copper, and cobalt�Ccopper mixtures

Colloidal ZnS quantum dots (QDs) are prepared by passing H₂S gas through a solution of Zn(CH₃COO)₂ in acetonitrile. Photophysical properties are investigated using UV?CVisible and photoluminescence (PL) spectroscopy. The spectrum shows an absorption shoulder at 271 nm representing a band gap of 4.6 eV. The doping of ZnS QDs with Co, Cu, and a mixture of Co and Cu not only increased the band gap to 0.2 eV but also turns these otherwise colorless QDs to blue in color due to cobalt, and green due to Cu. The observed emission in the visible region suggests that the dopants may have induced additional excited states to the ZnS QDs. This absorbance in the visible region can be utilized in the optoelectronic applications.     

Up-conversion luminescence phenomenon of Er~(3 ) ions in ErP_5O_(14) noncrystal glass

The up-conversion luminescence phenomenon was observed in ErP_5O_(14) noncrys-tal glass induced by pulsed DCM dye laser.Based on the difference between up-conversion ex-citation spectrum and absorption of ~4F_(9/2) and dependence of up-conversion fluorescence inten-sity on the exciting wavelength,it is found that the mechanism of up-conversion from ~4F_(9/2)level of ErP_5O_(14) noncrystal glass can not be ascribed to energy transfering between Er~(3 ) ions,a seguential absorption of two photons by a single ion should be responsible for these process.     

纳米ZnO薄膜的激子光致发光特性

报道了纳米ZnO薄膜激子光致发光(PL)与温度的关系。首先利用低压金属有机化学气相沉积(LPMOCVD)技术生长ZnS薄膜,然后将ZnS薄膜在氧气中于800℃下热氧化2h获得纳米ZnO薄膜。X射线衍射(XRD)结果表明,纳米ZnO薄膜具有六角纤锌矿多晶结构且具有择优(002)取向。室温下观察到一束强的紫外(326eV)光致发光(PL)和很弱的深能级(DL)发射。根据激子峰的半高宽(FWHM)与温度的关系,确定了激子纵向光学声子(LO)的耦合强度(ГLO)。     

核/壳结构ZnS : Mn/CdS纳米粒子的制备及发光

利用溶剂热法制备了Mn离子掺杂的ZnS纳米粒子(ZnS : Mn),利用沉淀法对ZnS ∶ Mn纳米粒子进行了不同厚度的CdS无机壳层包覆。采用X射线衍射(XRD)、透射电子显微镜(TEM)、X射线光电子能谱(XPS)及光致发光(PL)光谱等手段对样品进行了表征。TEM显示粒子为球形,直径大约在14~18 nm之间。由XRD结果可以看出CdS壳层的形成过程受到了ZnS ∶ Mn核的影响,导致其结晶较差。XRD和XPS测量证明了ZnS : Mn/CdS的核壳结构。随着CdS壳层的增厚,样品的发光强度呈现一直减弱的现象。     

Temperature-dependent photoluminescence of CuInS2 quantum dots

Temperature-dependent photoluminescence (PL) spectroscopy of CuInS₂ core and CuInS₂/ZnS core–shell quantum dots (QDs) was studied for understanding the influence of a ZnS shell on the PL mechanism. The PL quantum yield and lifetime of CuInS₂ core QDs were significantly enhanced after the QD surface was coated with the ZnS shell. The temperature dependences of the PL energy, linewidth, and intensity for the core and core–shell QDs were studied in the temperature range from 92 to 287 K. The temperature-dependent shifts of 98 meV and 35 meV for the PL energies of the QDs were much larger than those of the excitons in their bulk semiconductors. It was surprisingly found that the core and core–shell QDs exhibited a similar temperature dependence of the PL intensity. The PL in the CuInS₂/ZnS core–shell QDs was suggested to originate from recombination of many kinds of defect-related emission centers in the interior of the cores.     

Experimental investigation of energy transfer between CdSe/ZnS quantum dots and different-sized gold nanoparticles

Hybrid nanostructures of quantum dots(QDs) and metallic nanostructure are attractive for future use in a variety of optoelectronic devices. For photodetection applications, it is important that the photoluminescence (PL) of QDs is quenched by the metallic nanostructures. Here, the quenching efficiency of CdSe/ZnS core-shell quantum dots (QDs) with different sized gold nanoparticles (NPs) films through energy transfer is investigated by measuring the PL intensity of the hybrid nanostructures. In our research, the gold NPs films are formed by the post-annealing of the deposited Au films on the quartz substrate. We find that the energy transfer from the QDs to the Au NPs strongly depends on the sizes of the Au NPs. For CdSe/ZnS QDs direct contact with the Au NPs films, the largest energy transfer efficiency are detected when the resonance absorption peak of the Au NPs is nearest to the emission peak of the CdSe/ZnS QDs. However, when there is a PMMA spacer between the QDs layer and the Au NPs films, firstly, we find that the energy transfer efficiency is weakened, and the largest energy transfer efficiency is obtained when the resonant absorption peak of the Au NPs is farthest to the emission peak wavelength of CdSe/ZnS QDs. These results will be useful for the potential design of the high efficiency QDs optoelectronic devices.     

Photoluminescence of colloidal CdSe nano-tetrapods and quantum dots in oxygenic and oxygen-free environments

The effects of oxygenic versus oxygen-free environments on colloidal CdSe nano-tetrapods and quantum dots (QDs) were studied using both continuous and time-resolved photoluminescence (PL) measurements. The decays of PL intensities for tetrapods and QDs in oxygen-free solution (chloroform) and in air (on silicon) can be well fitted by a bi-exponential function. Based on the emission-energy dependence of carrier lifetimes and the amplitude ratio of the fast-decay component to the slow-decay component, the fast and slow PL decays of CdSe nanocrystals are attributed to the recombination of delocalized carriers in the core states and localized carriers in the surface states, respectively. The PL intensities of CdSe nano-tetrapods and QDs were found to be five times and an order of magnitude higher in air than in vacuum, respectively, which is explained by the passivation of surface defects by the polar gas (oxygen) absorption. The lower enhancement in PL intensities of CdSe nano-tetrapods is explained by the special morphology of the tetrapods.