Dimeric (tris(tert-butyl)silyl)phosphanyl (tris(tert-butyl)silyl)phosphanediyl gallane: a molecule with a Ga-P-Ga heteroallyl system

The metathesis reaction of potassium (tris(tert-butyl)silyl)phosphanide with GaCl(3) in a molar ratio of 1:1 leads to the formation of [Cl(2)GaP(H)Si(t)Bu(3)](2) (1) as a mixture of cis and trans isomers with very large (1)J(P,H) and (2)J(P,P) coupling constants. The molecular structure of 1 shows a Ga(2)P(2) cycle with nearly planar coordinated phosphorus atoms under neglection of the hydrogen atoms and Ga-P distances of 239 pm. The reaction of GaCl(3) with 3 equiv of potassium (tris(tert-butyl)silyl)phosphanide as well as the reaction of 1 with 2 equiv of KP(H)Si(t)Bu(3) yields [(t)Bu(3)SiP(H)Ga(mu-PSi(t)Bu(3))](2) (2). The central moiety comprises a four-membered Ga(2)P(2) cycle with one planar P atom and extremely short Ga-P bonds of approximately 226 pm, the other being in a pyramidal environment with an angle sum of 298.4 degrees. The structure of 2 can be described as a GaPGa heteroallyl system which is bonded to a phosphanidyl substituent. This idea and its dependency on the steric demand of the trialkylsilyl groups are investigated by DFT calculations on different isomers of 2.     

New chloro,mu-oxo,and alkyl derivatives of dioxomolybdenum(VI) and -tungsten(VI) complexes chelated with N(2)O tridentate ligands: synthesis and catalytic activities toward olefin epoxidation

A new series of cis-dioxomolybdenum(VI) complexes MoO(2)(L(n))Cl (n = 1-5) were prepared by the reaction of MoO(2)Cl(2)(DME) (DME = 1,2-dimethoxyethane) with 2-N-(2-pyridylmethyl)aminophenol (HL(1)) or its N-alkyl derivatives (HL(n)) (n = 2-5) in the presence of triethylamine. The new mu-oxo dimolybdenum compounds [MoO(2)(L(n))](2)O (n = 1, 4, 5, 7) were also prepared by treating the corresponding ligand HL(n) with MoO(2)(acac)(2) (acac = acetylacetonate) in warm methanolic solutions or (NH(4))(6)[Mo(7)O(24)].4H(2)O in the presence of dilute HCl. Treatment of MoO(2)(L(1))Cl or [MoO(2)(L(1))](2)O with the Grignard reagent Me(3)SiCH(2)MgCl gave the alkyl compound MoO(2)(L(1))(CH(2)SiMe(3)), which represents the first example of dioxomolybdenum(VI) alkyl complex supported by a N(2)O-type ancillary ligand. The analogous chloro and mu-oxo tungsten derivatives WO(2)(L(n))Cl (n = 6, 7) and [WO(2)(L(n))](2)O (n = 1, 4, 6, 7) were prepared by the reaction of WO(2)Cl(2)(DME) with HL(n) in the presence of triethylamine. Similar to their molybdenum analogues, the tungsten alkyl complexes WO(2)(L(n))(R) (n = 6, 7; R = Me, Et, CH(2)SiMe(3), C(6)H(4)(t)Bu-4) were synthesized by treating WO(2)(L(n))Cl or [WO(2)(L(n))](2)O (n = 6, 7) with the appropriate Grignard reagents. The catalytic properties of selected dioxo-Mo(VI) and -W(VI) chloro and mu-oxo complexes toward epoxidation of styrene by tert-butyl hydroperoxide (TBHP) were also investigated.     

Untersuchungen zur Lithiierung und Substitution des HP[Si(t-Bu)2]2PH

Investigations on Lithiation and Substitution of HP[Si(t-Bu)₂]₂PH HP[Si(t-Bu)₂]₂PH 1 is monolithiated by reaction with LiPH₂ · DME or LiBu in toluene. The crystalline compound HP[Si(t-Bu)₂]₂PLi · 2 DME 2 can be isolated in DME. Reaction of 2 with Me₂SiCl₂ leads to HP[Si(t-Bu)₂]₂P? SiMe₂Cl 4 , ClMe₂Si? P[Si(t-Bu)₂]₂P? SiMe₂Cl 5 , HP[Si(t-Bu)₂]₂P? SiMe₂? P[Si(t-Bu)₂] ₂PH 6 . Isomerization by Li/H migration between 4 and 2 leads to the formation of 5 . Reaction of Li(t-Bu) with 1 or 2 yields LiP[Si(t-Bu)₂]₂PLi 3 by further lithiation. 3 could not be obtained purely, only in a mixture with 2 . These compounds favourably generate with t-BuPCl₂ in hexane Cl(t-Bu)P? P[Si(t-Bu)₂]₂P? P(t-Bu)Cl 9 , in THF HP[Si(t-Bu)₂]₂P? P(t-Bu)? P[Si(t-Bu)₂]₂ PH 12 (main product), 9 , H(t-Bu)P? P[Si(t-Bu)₂]₂P? P(t-Bu)Cl 10 , H(t-Bu)P? P[Si(t-Bu)₂]₂P? P(t-Bu)H 11 as well as HP[Si(t-Bu)₂]₂P? P(t-Bu)H 13 and HP[Si(t-Bu)₂]₂P? P(t-Bu)₂ 14 .     

Group 13 β-ketoiminate compounds: gallium hydride derivatives as molecular precursors to thin films of Ga2O3

Bis(β-ketoimine) ligands, [R{N(H)C(Me)-CHC(Me)═O}(2)] (L(1)H(2), R = (CH(2))(2); L(2)H(2), R = (CH(2))(3)), linked by ethylene (L(1)) and propylene (L(2)) bridges have been used to form aluminum, gallium, and indium chloride complexes [Al(L(1))Cl] (3), [Ga(L(n))Cl] (4, n = 1; 6, n = 2) and [In(L(n))Cl] (5, n = 1; 7, n = 2). Ligand L(1) has also been used to form a gallium hydride derivative [Ga(L(1))H] (8), but indium analogues could not be made. β-ketoimine ligands, [Me(2)N(CH(2))(3)N(H)C(R')-CHC(R')═O] (L(3)H, R' = Me; L(4)H, R' = Ph), with a donor-functionalized Lewis base have also been synthesized and used to form gallium and indium alkyl complexes, [Ga(L(3))Me(2)] (9) and [In(L(3))Me(2)] (10), which were isolated as oils. The related gallium hydride complexes, [Ga(L(n))H(2)] (11, n = 3; 12, n = 4), were also prepared, but again no indium hydride species could be made. The complexes were characterized mainly by NMR spectroscopy, mass spectrometry, and single crystal X-ray diffraction. The β-ketoiminate gallium hydride compounds (8 and 11) have been used as single-source precursors for the deposition of Ga(2)O(3) by aerosol-assisted (AA)CVD with toluene as the solvent. The quality of the films varied according to the precursor used, with the complex [Ga(L(1))H] (8) giving by far the best quality films. Although the films were amorphous as deposited, they could be annealed at 1000 °C to form crystalline Ga(2)O(3). The films were analyzed by powder XRD, SEM, and EDX.     

Gold(I) phosphido complexes: synthesis, structure, and reactivity

Deprotonation of the phosphine complexes Au(PHR(2))Cl with aqueous ammonia gave the gold(I) phosphido complexes [Au(PR(2))](n)() (PR(2) = PMes(2) (1), PCy(2) (2), P(t-Bu)(2) (3), PIs(2) (4), PPhMes (5), PHMes (6); Mes = 2,4,6-Me(3)C(6)H(2), Is = 2,4,6-(i-Pr)(3)C(6)H(2), Mes = 2,4,6-(t-Bu)(3)C(6)H(2), Cy = cyclo-C(6)H(11)). (31)P NMR spectroscopy showed that these complexes exist in solution as mixtures, presumably oligomeric rings of different sizes. X-ray crystallographic structure determinations on single oligomers of 1-4 revealed rings of varying size (n = 4, 6, 6, and 3, respectively) and conformation. Reactions of 1-3 and 5 with PPN[AuCl(2)] gave PPN[(AuCl)(2)(micro-PR(2))] (9-12, PPN = (PPh(3))(2)N(+)). Treatment of 3 with the reagents HI, I(2), ArSH, LiP(t-Bu)(2), and [PH(2)(t-Bu)(2)]BF(4) gave respectively Au(PH(t-Bu)(2))(I) (14), Au(PI(t-Bu)(2))(I) (15), Au(PH(t-Bu)(2))(SAr) (16, Ar = p-t-BuC(6)H(4)), Li[Au(P(t-Bu)(2))(2)] (17), and [Au(PH(t-Bu)(2))(2)]BF(4) (19).     

Synthesis and characterization of iridium 1,3,5-triaza-7-phosphaadamantane (PTA) complexes. X-ray crystal and molecular structures of [Ir(PTA)4(CO)]Cl and [Ir(PTAH)3(PTAH2)(H)2]Cl6

The first 1,3,5-triaza-7-phosphaadamantane (PTA) ligated iridium compounds have been synthesized. The reaction of PTA with [Ir(COD)Cl]2 (COD = 1,5-cyclooctadiene) under a CO atmosphere produces an inseparable mixture of [Ir(PTA)3(CO)Cl] (1) and the PTA analogue of Vaska's compound, [Ir(PTA)2(CO)Cl] (2). Compound 1 and [Ir(PTA)4(CO)]Cl (3) were prepared via ligand substitution reactions of PTA with Vaska's compound, trans-Ir(PPh3)2(CO)Cl, in absolute and 95% ethanol, respectively. Complex 3 crystallizes in the orthorhombic space group Pbca with a = 20.3619(4) A, b = 14.0345(3) A, c = 24.1575(5) A, and Z = 8. Single-crystal X-ray diffraction studies show that 3 has a trigonal bipyramidal structure in which the CO occupies an axial position. This is the first crystallographically characterized [IrP4(CO)]+ complex in which the CO is axially ligated. Compound 1 was converted into 3 by ligand substitution with 1 equiv of PTA in water. Interestingly, the reaction of 3 with excess NaCl did not result in the production of 1, but instead the formation of the dichloro species, [Ir(PTAH)2(PTA)2Cl2]Cl3 (4) (PTAH = protonated PTA). Dissolution of 1 or 3 in dilute HCl produced 4 and a dihydrido species, [Ir(PTAH)4(H)2]Cl5 (5), which were readily separated by inspection due to their different crystal habits. Compound 5 crystallizes in the triclinic space group P1 with a = 12.4432(9) A, b = 12.5921(9) A, c = 16.3231(12) A, alpha = 76.004(1) degrees, beta = 71.605(1) degrees, gamma = 69.177(1) degrees, and Z = 2. Complex 5 exhibits a distorted octahedral geometry with two hydride ligands in a cis configuration. A rationale consistent with these reactions is presented by consideration of the steric and electronic properties of the PTA ligand.     

2,6-Mes(2)C(6)H(3)](2)Ga(+)Li[Al(OCH(CF(3))(2))(4)](2)(-) (Mes = 2,4,6-Me(3)C(6)H(2)): A compound containing a linear unsolvated two-coordinate gallium cation

The title compound [2,6-Mes(2)C(2)H(3)](2)Ga(+)Li[Al(OCH(CF(3))(2))(4)](2)(-), 1, containing a linear two-coordinate gallium cation, has been obtained by metathesis reaction of [2,6-Mes(2)C(2)H(3)](2)GaCl with 2 equiv of Li[Al(OCH(CF(3))(2))(4)] in C(6)H(5)Cl solution at room temperature. Compound 1 has been characterized by (1)H, (13)C((1)H), (19)F, and (27)Al NMR spectroscopy and X-ray crystallography. Compound 1 consists of isolated [2,6-Mes(2)C(6)H(3)](2)Ga(+) cations and Li[Al(OCH(CF(3))(2))(4)](2)(-) anions. The C-Ga-C angle is 175.69(7) degrees, and the Ga-C distances are 1.9130(14) and 1.9145(16) A. The title compound is remarkably stable, is only a weak Lewis acid, and polymerizes cyclohexene oxide.     

Synthesis, Structure and Characterization of a Novel Asymmetrical Half-sandwich Binuclear Iron Carborane Complex [η~5-C_5H_3(t-Bu)_2]_2Fe_2(CO)_3Se_2C_2B_(10)H_(10)

IntroductionThe chemistry of chalcogen organometalliccomplexs has become one of the most activebranches in modern chemistry[1] .Itnot only showsthe coordinate variability of organometalliccomplexes but also is applied to studying thereaction mechanism of biologic enzyme[2 ] and thecatalysis of dehydrogenation or hydrogenation inindustry[3] .It is known that transition metalcomplexes react with cyclopentadienyl orsubstituted cyclopentadienyl to form halfsandwichcomplexes with different structur…     

Unusual iron(III) ate complexes stabilized by Li-pi interactions

Several iron(III) complexes incorporating diamidoether ligands are described. The reaction between [Li(2)[RN(SiMe(2))](2)O] and FeX(3) (X=Cl or Br; R=2,4,6-Me(3)Ph or 2,6-iPr(2)Ph) form unusual ate complexes, [FeX(2)Li[RN(SiMe(2))](2)O](2) (2, X=Cl, R=2,4,6-Me(3)Ph; 3, X=Br, R=2,4,6-Me(3)Ph; 4, X=Cl, R=2,6-iPr(2)Ph) which are stabilized by Li-pi interactions. These dimeric iron(III)-diamido complexes exhibit magnetic behaviour characteristic of uncoupled high spin (S= 5/2 ) iron(III) centres. They also undergo halide metathesis resulting in reduced iron(II) species. Thus, reaction of 2 with alkyllithium reagents leads to the formation of iron(II) dimer [Fe[Me(3)PhN(SiMe(2))](2)O](2) (6). Similarly, the previously reported iron(III)-diamido complex [FeCl[tBuN(SiMe(2))](2)O](2) (1) reacts with LiPPh(2) to yield the iron(II) dimer [Fe[tBuN(SiMe(2))](2)O](2) but reaction with LiNPh(2) gives the iron(II) product [Fe(2)(NPh(2))(2)[tBuN(SiMe(2))](2)O] (5). Some redox chemistry is also observed as side reactions in the syntheses of 2-4, yielding THF adducts of FeX(2): the one-dimensional chain [FeBr(2)(THF)(2)](n) (7) and the cluster [Fe(4)Cl(8)(THF)(6)]. The X-ray crystal structures of 3, 5 and 7 are described.     

Homoleptic hexa and penta gallylene coordinated complexes of molybdenum and rhodium

The reactions of molybdenum(0) and rhodium(I) olefin containing starting materials with the carbenoid group 13 metal ligator ligand GaR (R = Cp*, DDP; Cp* = pentamethylcyclopentadienyl, DDP = HC(CMeNC(6)H(3)-2,6-(i)Pr(2))(2)) were investigated and compared. Treatment of [Mo(η(4)-butadiene)(3)] with GaCp* under hydrogen atmosphere at 100 °C yields the homoleptic, hexa coordinated, and sterically crowded complex [Mo(GaCp*)(6)] (1) in good yields ≥50%. Compound 1 exhibits an unusual and high coordinated octahedral [MoGa(6)] core. Similarly, [Rh(GaCp*)(5)][CF(3)SO(3)] (2) and [Rh(GaCp*)(5)][BAr(F)] (3) (BAr(F) = B{C(6)H(3)(CF(3))(2)}(4)) are prepared by the reaction of GaCp* with the rhodium(I) compound [Rh(coe)(2)(CF(3)SO(3))](2) (coe = cyclooctene) and subsequent anion exchange in case of 3. Compound 2 features a trigonal bipyramidal [RhGa(5)] unit. In contrast, reaction of excess Ga(DDP) with [Rh(coe)(2)(CF(3)SO(3))](2) does not result in a high coordinated homoleptic complex but instead yields [(coe)(toluene)Rh{Ga(DDP)}(CF(3)SO(3))] (4). The common feature of 2 and 4 in the solid state structure is the presence of short CF(3)SO(2)O···Ga contacts involving the GaCp* or rather the Ga(DDP) ligand. Compounds 1, 2, and 4 have been fully characterized by single crystal X-ray diffraction, variable temperature (1)H and (13)C NMR spectroscopy, IR spectroscopy, mass spectrometry, as well as elemental analysis.     

Secondary Amine Stabilized Aluminum Hydrides Derived from N,N'-Di-tert-butylethylenediamines

The metalation of substituted N,N'-di-tert-butylethylenediamines by various aluminum hydride sources has been investigated. HN(t-Bu)CH(t-Bu)CH(2)N(H)(t-Bu) forms a dimeric lithium chelated adduct of LiAlH(4), [{[HN(t-Bu)CH(t-Bu)CH(2)N(H)(t-Bu)]Li(&mgr;-H)(2)AlH(2)}(2)], 4, which thermally decomposes to yield the tetrameric lithium diamidoaluminum hydride [{Li[N(t-Bu)CH(t-Bu)CH(2)N(t-Bu)]AlH(2)}(4)], 5. The same diamine reacts with AlH(3).NMe(3) or AlH(3) diethyl etherate to give the secondary amine stabilized amidoaluminum hydride species [{HN(t-Bu)CH(t-Bu)CH(2)N(t-Bu)}AlH(2)], 2. Similarly, the same aluminum hydride sources react with the diamine rac-HN(t-Bu)CH(Me)CH(Me)N(H)(t-Bu) to yield [{rac-HN(t-Bu)CH(Me)CH(Me)N(t-Bu)}AlH(2)], 3. Compounds 2 and 3 are stable with respect to elimination of hydrogen to form diamidoaluminum hydrides, but can be converted to the alane rich species, [H(2)Al{N(t-Bu)CH(t-Bu)CH(2)N(t-Bu)}AlH(2)],6, and [H(2)Al{rac-N(t-Bu)CH(Me)CH(Me)N(t-Bu)}AlH(2)], 7, by reaction with AlH(3).NMe(3) under special conditions. The varying reactivity of the three aluminum hydride sources in these reactions has enabled mechanistic information to be gathered, and the effect of the different steric requirements in the diamines on the stability of the complexes is discussed. Crystals of 3are monoclinic, space group P2(1)/n (No. 14), with a = 8.910(4), b = 14.809(1), and c = 12.239(6) ?, beta = 109.76(2) degrees, V = 1520(1) ?(3), and Z = 4. Crystals of 4 are orthorhombic, space group Pbca (No. 61), with a = 15.906(9), b = 24.651(7), and c = 9.933(7) ?, V = 3895(3) ?(3), and Z = 4. Crystals of 6 are monoclinic, space group P2(1)/c (No. 14), with a = 8.392(1), b = 17.513(2), and c = 12.959(1) ?, beta = 107.098(8) degrees, V = 1820.4(3) ?(3), and Z = 4.     

Synthetic and structural studies of donor-functionalized alkoxy derivatives of gallium

The synthesis of a range of alkyl/chloro-gallium alkoxide and amido/alkoxide compounds was achieved via a series of protonolysis and alcoholysis steps. The initial reaction involved the synthesis of [Me(Cl)Ga{N(SiMe(3))(2)}](2) (1) via methyl group transfer from the reaction of GaCl(3) with two equivalents of LiN(SiMe(3))(2). Reaction of 1 with varying amounts of ROH resulted in the formation of [Me(Cl)Ga(OR)](2) (2, R = CH(2)CH(2)OMe; 3, CH(CH(3))CH(2)NMe(2)), [Me(Cl)Ga{N(SiMe(3))(2)}(μ(2)-OR)Ga(Cl)Me] (4, R = CH(2)CH(2)NMe(2)), or [MeGa(OR)(2)] (5, R = CH(CH(3))CH(2)NMe(2)). Compound 4 represents an intermediate in the formation of dimeric complexes, of the type [Me(Cl)Ga(OR)](2), when formed from compound [Me(Cl)Ga{N(SiMe(3))(2)}](2). A methylgallium amido/alkoxide complex [MeGa{N(SiMe(3))(2)}(OCH(2)CH(2)OMe)](2) (6) was isolated when 2 was further reacted with LiN(SiMe(3))(2). In addition, reaction of 2 with HO(t)Bu resulted in a simple alcohol/alkoxide exchange and formation of [Me(Cl)Ga(O(t)Bu)](2) (7). In contrast to the formation of 1, the in situ reaction of GaCl(3) with one equivalent of LiN(SiMe(3))(2) yielded [Cl(2)Ga{N(SiMe(3))(2)}](2) in low yield, where no methyl group transfer has occurred. Reaction of alcohol with [Cl(2)Ga{N(SiMe(3))(2)}](2) was then found to yield [Cl(2)Ga(OR)](2) (8, R = CH(2)CH(2)NMe(2)), and further reaction of 8 with LiN(SiMe(3))(2) yielded the gallium amido alkoxide complex, [ClGa{N(SiMe(3))(2)}(OR)](2) (9, R = CH(2)CH(2)NMe(2)), similar to 6. The structures of compounds 4, 5, 7, and 8 have been determined by single-crystal X-ray diffraction.     

Dioxomolybdenum(VI) complexes as catalysts for the hydrosilylation of aldehydes and ketones

The dioxomolybdenum(VI) complexes [MoO2Cl2] (1), [MoO2(acac)2] (2), [MoO2(S2CNEt2)2] (3), [CpMoO2Cl] (4), [MoO2(mes)2] (5) and the polymeric organotin-oxomolybdates [(R3Sn)2MoO4] [R = n-Bu (6), t-Bu (7), Me (8)] were examined as catalysts for the hydrosilylation of aldehydes and ketones with dimethylphenylsilane. Of these, [MoO2Cl2] (1) was the most efficient catalyst, affording quantitative yields of the corresponding silylated ethers at room temperature in acetonitrile. Complexes 2, 4-8 also catalyzed the same reaction but required heating at 80 degrees C and longer reaction times compared with 1. Compound 3 is inactive. The wide scope of molybdenum oxide-mediated hydrosilylation was established with a variety of aldehydes and ketones. Counter intuitively, the activity of is 1 highest in NCMe. In the absence of a carbonyl substrate, [MoO2Cl2(NCBu(t))] (10) reacts with HSiMe2Ph affording [MoO(OSiMe2Ph)Cl2]2 (11) which has been fully characterized by NMR and IR spectroscopy, elemental analyses and mass spectrometry. Addition of radical scavengers strongly slows down the [MoO2Cl2]-based hydrosilylation suggesting the intermediacy of oxygen-centered radicals.     

O(2) Insertion into Group 9 Metal-Hydride Bonds: Evidence for Oxygen Activation through the Hydrogen-Atom-Abstraction Mechanism

A detailed density functional study was performed to examine the reaction of mixed-valence dirhodium and diiridium species [M(2)(0,II)(tfepma)(2)(CN(t)Bu)(2)(Cl)(2) (1, tfepma = MeN[P(OCH(2)CF(3))(2)](2), CN(t)Bu = tert-butyl isocyaninde)] with HCl and oxygen with an interest in examining the pathways for oxygen insertion into the intermediate metal hydride to form hydroperoxo species. The O(2) hydrogen atom abstraction mechanism for both the Rh and Ir was found to be feasible. This is the first time this mechanism has been applied to a Rh system and only the second time it has been examined for a system other than Pd. The competing trans HCl reductive elimination pathway was also examined and found to be greatly dependent on the stereochemistry of the starting hydride primarily due to the intermediate formed upon the loss of Cl(-). As a result, the reductive elimination pathway was more favorable by 11.5 kcal/mol for the experimentally observed Ir stereoisomer, while the two pathways were isoenergetic for the other stereoisomer of the Rh complex. All findings are consistent with the kinetics study previously performed.     

Molecular and electronic structures of dinuclear iron complexes incorporating strongly electron-donating ligands: implications for the generation of the one- and two-electron oxidized forms

The ligands (L(t-Bu(2)))(2-), (L(Me(2)))(2-), and (L(Cl(2)))(2-) have been employed for the synthesis of the dinuclear Fe(III) complexes [L(t-Bu(2))Fe(μ-O)FeL(t-Bu(2))], [L(Me(2))Fe(μ-O)FeL(Me(2))], and [L(Cl(2))Fe(μ-O)FeL(Cl(2))]. The strongly electron-donating groups (tert-amines and phenolates) were chosen to increase the electron density at the coordinated ferric ions and thus to facilitate the oxidation of the complexes, with the possibility of fine-tuning the electronic structures by variation of the remote substituents. Molecular structures established in the solid (by single-crystal X-ray diffraction) and in solution (by X-ray absorption spectroscopy) show that the Fe ions are five-coordinate in a square-pyramidal coordination environment with the ligand adopting a trans-conformation. Spectroscopic and magnetic characterization establishes the highly covalent nature of the Fe(III)-O(oxo) and Fe(III)-O(Ph) bonds. The variations in the donor capabilities of the phenolates (due to changes in the remote substituents) are compensated for by a flexible electron donation of the Fe(III)-O(oxo) bonding. Spectroelectrochemical characterization demonstrates that [L(t-Bu(2))Fe(μ-O)FeL(t-Bu(2))] can be oxidized reversibly at +0.27 and +0.44 V versus Fc(+)/Fc, whereas [L(Me(2))Fe(μ-O)FeL(Me(2))] and [L(Cl(2))Fe(μ-O)FeL(Cl(2))] exhibit irreversible oxidations at +0.29 and +0.87 V versus Fc(+)/Fc, respectively. UV-vis, electron paramagnetic resonance (EPR), X-ray absorption spectroscopy (XAS), and Mo?ssbauer spectroscopy show that the successive oxidations of [L(t-Bu(2))Fe(μ-O)FeL(t-Bu(2))] are ligand-centered leading to the monophenoxyl radical complex [(?)L(t-Bu(2))Fe(III)(μ-O)Fe(III)L(t-Bu(2))](+) (with the oxidation primarily localized on one-half of the molecule) and the diphenoxyl radical complex [(?)L(t-Bu(2))Fe(III)(μ-O)Fe(III?)L(t-Bu(2))](2+). Both products are unstable in solution and decay by cleavage of an Fe(III)-O(oxo) bond. The two-electron oxidized species is more stable because of two equally strong Fe(III)-O(oxo) bonds, whereas in the singly oxidized species the Fe(III)-O(oxo) bond of the non-oxidized half is weakened. The decay of the monocation results in the formation of [L(t-Bu(2))Fe(III)](+) and [L(t-Bu(2))Fe(IV)=O], while the decay of the dication yields [(?)L(t-Bu(2))Fe(III)](2+) and [L(t-Bu(2))Fe(IV)=O]. Follow-up reactions of the oxidized fragments with the counteranion of the oxidant, [SbCl(6)](-), leads to the formation of [Fe(III)Cl(4)](-).     

Isomerization of trans-[Ru(PTA)4Cl2] to cis-[Ru(PTA)4Cl2] in water and organic solvent: revisiting the chemistry of [Ru(PTA)4Cl2

trans-[Ru(PTA)4Cl2] (trans-1), (PTA = 1,3,5-triaza-7-phosphatricyclo[3.3.1.13,7]decane) has been isolated and structurally characterized by X-ray crystallography. The structure reveals ruthenium in a slightly distorted-octahedral environment bound to two axial chlorides and four equatorial PTA ligands. In organic solvents, trans-1 undergoes a relatively clean isomerization to cis-1. In aqueous environments, trans-1 undergoes a more complicated transformation involving isomerization, protonation, and ligand substitution affording cis-1 and a series of structurally related molecules. From these results, we conclude that the synthesis of [Ru(PTA)4Cl2] (1) affords trans-1, not cis-1, as earlier reports suggest. The water-soluble hydride cis-[Ru(PTA)4H2] (2) has also been synthesized from the reaction of trans-[Ru(PTA)4Cl2] with excess sodium formate. Compound 2 is stable in deoxygenated water and undergoes H/D exchange with D2O (t1/2 approximately equal to 120 min, at 25 degrees C). The solid-state structures of both trans-1 and 2 are described.     

Aluminum hydride cations stabilized by weakly coordinating carbaalanates

The reactions of t-BuCCLi with a mixture of AlH(3).NMe(3) and ClAlH(2).NMe(3) in boiling toluene with the addition of [t-BuCH(2)(Bzl)NMe(2)]Cl, or a bulky beta-diketimine instead, and [n-Bu(4)N]Cl led to the carbaalanates [H(2)Al(NMe(3))(2)](2)[(AlH)(8)(CCH(2)t-Bu)(6)], 3, and [n-Bu(4)N](2)[(AlH)(8)(CCH(2)t-Bu)(6)], 4, respectively. The reaction of Me(3)N.Al(CCt-Bu)(3) 5 and AlH(3).NMe(3) in boiling toluene yielded [H(n-Bu)Al(NMe(3))(2)][(AlH)(7)(AlNMe(3))(CCH(2)t-Bu)(6)], 6, in trace amounts. The single-crystal X-ray structures of 3 and 6 are reported. The compounds 3, 4, and 6 consist of well-separated ion pairs introducing carbaalanates as weakly coordinating anions and stabilizing aluminum hydride cations.     

Synthesis and characterization of HN(SPiPr2)(SePPh2) and [Te[N(SPiPr2)(SePPh2)]2

The compound HN(SP(i)Pr(2))(SePPh(2)) has been synthesized from the reaction of Ph(2)P(Se)NH(2) with (i)()Pr(2)P(S)Cl in the presence of NaH in THF. HN(SP(i)Pr(2))(SePPh(2)) crystallizes with eight formula units in space group Pbca of the orthorhombic system in a cell of dimensions at -120 degrees C of a = 9.9560(6) A, b = 17.9053(10) A, c = 22.4156(13) A, and V = 3995.9(4) A(3). The square-planar Te(II) complex [Te[N(SP(i)Pr(2))(SePPh(2))](2)] has been isolated from the reaction of Te(tu)(4)Cl(2) x 2H(2)O (tu = thiourea) with the anion [N(SP(i)Pr(2))(SePPh(2))](-), generated in situ from HN(SP(i)Pr(2))(SePPh(2)) in the presence of KO(t)Bu. [Te[N(SP(i)Pr(2))(SePPh(2))](2)] is dimorphic, crystallizing with one formula unit in space group P1 of the triclinic system in a cell of dimensions at -120 degrees C of a = 9.8476(9) A, b = 10.3296(9) A, c = 11.3429(10) A, alpha = 101.903(1) degrees, beta = 115.471(1) degrees, gamma = 92.281(2) degrees, and V = 1008.4(2) A(3) and also crystallizing with two formula units in space group P2(1)/n of the monoclinic system in a cell of dimensions at -120 degrees C of a = 8.7931(5) A, b = 17.1830(10) A, c = 14,1026(9) A, beta = 104.696(1) degrees, and V = 2061.1(2) A(3). In each instance, the [Te[N(SP(i)Pr(2))(SePPh(2))](2)] molecule possesses a center of symmetry, comprising a Te center liganded in a trans manner by two bidentate N(SP(i)Pr(2))(SePPh(2)) groups. However, the (31)P, (77)Se, and (125)Te NMR spectra of [Te[N(SP(i)Pr(2))(SePPh(2))](2)] show two sets of resonances at 25 degrees C. The (31)P VT NMR spectra show two sets of resonances between -50 and +50 degrees C that coalesce between 80 and 100 degrees C, consistent with the presence of the cis as well as the trans isomer in solution.     

Dichlorogallane (HGaCl(2))(2): its molecular structure and synthetic potential

Dichlorogallane (HGaCl(2))(2) is readily prepared from gallium trichloride and triethylsilane in quantitative yield. Its crystal structure has been determined by single crystal X-ray diffraction. In the chlorine-bridged dimers of crystallographically imposed C(2h) symmetry, the terminal hydrogen atoms are in trans positions. In the reaction with 2 equiv of triethylphosphine, the mononuclear complex (Et(3)P)GaHCl(2) is formed. Thermal decomposition of (HGaCl(2))(2) affords hydrogen gas and quantitative yields of "GaCl(2)" as mixed-valent Ga[GaCl(4)]. Treatment of this product with triethylphosphine gives the symmetrical, Ga-Ga-bonded gallium(II) complex [GaCl(2)(PEt(3))](2) with an ethane-type structure and with the phosphine ligands in a single-trans conformation. The corresponding [GaBr(2)(PEt(3))](2) complex is prepared from Ga[GaBr(4)] and has an analogous structure. (Et(3)P)GaCl(3) has been synthesized and structurally characterized as a reference compound.     

Catalysis of H(2)/D(2) scrambling and other H/D exchange processes by [Fe]-hydrogenase model complexes

Protonation of the [Fe]-hydrogenase model complex (mu-pdt)[Fe(CO)(2)(PMe(3))](2) (pdt = SCH(2)CH(2)CH(2)S) produces a species with a high field (1)H NMR resonance, isolated as the stable [(mu-H)(mu-pdt)[Fe(CO)(2)(PMe(3))](2)](+)[PF(6)](-) salt. Structural characterization found little difference in the 2Fe2S butterfly cores, with Fe.Fe distances of 2.555(2) and 2.578(1) A for the Fe-Fe bonded neutral species and the bridging hydride species, respectively (Zhao, X.; Georgakaki, I. P.; Miller, M. L.; Yarbrough, J. C.; Darensbourg, M. Y. J. Am. Chem. Soc. 2001, 123, 9710). Both are similar to the average Fe.Fe distance found in structures of three Fe-only hydrogenase active site 2Fe2S clusters: 2.6 A. A series of similar complexes (mu-edt)-, (mu-o-xyldt)-, and (mu-SEt)(2)[Fe(CO)(2)(PMe(3))](2) (edt = SCH(2)CH(2)S; o-xyldt = SCH(2)C(6)H(4)CH(2)S), (mu-pdt)[Fe(CO)(2)(PMe(2)Ph)](2), and their protonated derivatives likewise show uniformity in the Fe-Fe bond lengths of the neutral complexes and Fe.Fe distances in the cationic bridging hydrides. The positions of the PMe(3) and PMe(2)Ph ligands are dictated by the orientation of the S-C bonds in the (mu-SRS) or (mu-SR)(2) bridges and the subsequent steric hindrance of R. The Fe(II)(mu-H)Fe(II) complexes were compared for their ability to facilitate H/D exchange reactions, as have been used as assays of H(2)ase activity. In a reaction that is promoted by light but inhibited by CO, the [(mu-H)(mu-pdt)[Fe(CO)(2)(PMe(3))](2)](+) complex shows H/D exchange activity with D(2), producing [(mu-D)(mu-pdt)[Fe(CO)(2)(PMe(3))](2)](+) in CH(2)Cl(2) and in acetone, but not in CH(3)CN. In the presence of light, H/D scrambling between D(2)O and H(2) is also promoted by the Fe(II)(mu-H)Fe(II) catalyst. The requirement of an open site suggests that the key step in the reactions involves D(2) or H(2) binding to Fe(II) followed by deprotonation by the internal hydride base, or by external water. As indicated by similar catalytic efficiencies of members of the series, the nature of the bridging thiolates has little influence on the reactions. Comparison to [Fe]H(2)ase enzyme active site redox levels suggests that at least one Fe(II) must be available for H(2) uptake while a reduced or an electron-rich Fe(I)Fe(I) metal-metal bonded redox level is required for proton uptake.