卡尔曼滤波紫外光度法同时测定邻、间、对苯二酚

研究了苯二酚三种分异构体水溶液的紫外吸收光谱，在ＰＨ３．６的缓冲溶液中，邻、间、对苯二酚的紫我吸收峰分别为２７５ｎｍ，２７３ｎｍ和２８８ｎｍ三者重叠严重。选取在２４０ｎｍ－２９０ｎｍ范围内，每隔１ｎｍ测量一次吸光值截５１个点，采用卡尔曼滤波进行处理，可以获得较满意的结果，对１０个不同比例组成 标准混合液进行测定，邻、间、对苯二酚三者的平均回收率分别为９７．４％，１０１、７％和９８．０％，标准偏差分     

比值导数光谱法同时测定苯酚间苯二酚对苯二酚

以比值导数光谱法对苯酚、间苯二酚、对苯二酚的二组分和三组分混合体系进行了分析。方法以混合物的波谱除以干扰组分的波普得到比值波谱,再用“减（加）法技术”以比值波谱对波长求导得到比值导数波谱,方法兼具导数光谱能消除低频背景和高频噪声干扰的优点。由此得到的幽会导数波谱可完全消除干扰组分的吸光度的贡献,此法可很方便地对二组分体系进行测定。进一步以求得的比导数波谱对波长二次求导,可对三组分体系进行分析,用此     

比值导教光谱法同时测定苯酚间苯二酚对苯二酚

以比值导数光谱法对苯酚、间苯二酚、对苯二酚的二组分和三组分混合体系进行了分析。方法以混合物的波谱除以干扰组分的波谱得到比值波谱,再用“减(加)法技术”以比值波谱对波长求导得到比值导数波谱,方法兼具导数光谱法能消除低频背景和高频噪声干扰的优点。由此得到的比值导数波谱可完全消除干扰组分的吸光度的贡献。此法可很方便对二组分体系进行测定。进一步以求得的比导数波谱对波长二次求导,可对三组分体系进行分析,用此法对以上的二组分和三组混合体系进行分析均得到较好结果。     

径向基函数神经网络光度法同时测定苯酚、邻苯二酚、间苯二酚和对苯二酚

对吸收峰重叠严重的苯酚、邻苯二酚、间苯二酚和对苯二酚4组分体系进行研究,以径向基函数神经网络光度法建立校正模型,同时测定了水样中的苯酚、邻苯二酚、间苯二酚和对苯二酚的含量,回收率为95.7％～109.2％。     

紫外光谱法同时测定水中苯酚、邻苯二酚和间苯二酚

苯酚、邻苯二酚和间苯二酚的紫外光谱重叠严重,难以对它们进行单个分析,因此采用紫外光谱法测定水中苯酚、邻苯二酚和间苯二酚的吸光度,并以蚂蚁算法(ACA)处理测定后的数据,得到苯酚、邻苯二酚和间苯二酚的含量.苯酚、邻苯二酚、间苯二酚的回收率分别在98.33%～101.11%、96.25%～100.56%,98.13%～102.86%之间.     

石墨烯/铁氰化钴复合膜修饰玻碳电极同时测定对苯二酚、邻苯二酚和间苯二酚

采用滴涂法和电沉积法制备了石墨烯/铁氰化钴复合膜修饰玻碳电极. 用扫描电镜对该纳米复合膜进行了表征.用循环伏安法研究了对苯二酚(HQ)、邻苯二酚(CT)和间苯二酚(RS)在修饰电极上的电化学行为. 实验结果表明, 相对于裸玻碳电极和石墨烯修饰电极, HQ, CT 和RS 在石墨烯/铁氰化钴修饰电极上的氧化峰电流显著提高. 利用差分脉冲伏安法测定, HQ, CT 和RS 分别在1.0×10^－6～1.5×10^－4 mol/L, 1.0×10^－6～2.0×10^－4 mol/L 和3.5×10^－6～2.5×10^－4 mol/L浓度范围内与氧化峰电流呈良好的线性关系, 相关系数分别为0.991, 0.993 和0.992. 信噪比为3 时, HQ, CT 和RS 检出限分别为2.0×10^－7, 2.1×10^－7 和3.5×10^－7 mol/L. 将该方法用于水样分析, 回收率为95.6%～106.1%.     

二次微分脉冲溶出伏安法同时测定对苯二酚和邻苯二酚

制备了聚牛磺酸修饰玻碳电极,提出了一种灵敏的差分脉冲溶出伏安法(DPSV)同时测定痕量对苯二酚(HQ)和邻苯二酚(CC)的新方法.在HAc-NaAc缓冲溶液(pH4.6)中,于-0.400V(vsSCE)富集后,用DPSV进行分析,HQ和CC分别于0.157V和0.262V处获得灵敏的阳极溶出峰,峰电流与HQ和CC浓度...     

邻、间、对苯二酚磷酰化产物的电喷雾电离质谱研究

二乙基亚磷酸酯(DEPH)作为磷酰化试剂，采用Atherton—Todd反应首次对邻、间、对苯二酚分别进行磷酰化，生成相应的磷酸酯；并用电喷雾电离串联质谱(ESI—MS—MS)仪检测产物，首次提出了它们的质谱裂解规律。     

纳米氧化铜-碳纳米管修饰玻碳电极同时检测邻、对苯二酚

以商品化纳米氧化铜和羧化碳纳米管作为玻碳电极修饰材料,结合了两种材料的放大电信号和电催化性能,所构建的复合物修饰电极可区分性质相近的同分异构体邻苯二酚和对苯二酚的信号,同时可进一步放大两种酚的峰电流。 因此该基于纳米氧化铜和碳纳米管的电化学传感器可用于邻苯二酚和对苯二酚的同时检测。 采用循环伏安法对复合物中两种材料的比例、修饰量以及支持电解质pH进行了优化:纳米氧化铜和碳纳米管质量比为5∶1,修饰量为9 μL,pH=7.4的磷酸盐缓冲溶液被用作电解质溶液。 在优化的条件下,邻苯二酚和对苯二酚的微分脉冲伏安扫描峰电流与浓度在6.0×10^-7~3.0×10^-3 mol/L范围内均呈良好的线性关系,检出限(S/N=3)分别为1.0×10^-7和1.6×10^-7 mol/L。 该方法具有成本低、操作简便、快速的特点,对实际水样的加标回收率在94.6%~101.1%范围内,具有较好的实际应用前景。     

荧光光度法同时测定邻苯二酚、间苯二酚与对苯二酚

将一种直接信号校正(DOSC)-小波包变换(WPT)-偏最小二乘法(PLS)(DOSC-WPT-PLS)新方法用于解析荧光光谱严重重叠的邻苯二酚?间苯二酚和对苯二酚混合物,并对其进行测定。该法将DOSC、WPT及PLS 3种方法结合从而提高了获取特征信息的能力和回归质量。DOSC方法用于除去与浓度无关的结构噪音。利用WPT的时域和频域局部化的特点改进了除噪质量和数据压缩及信息提取能力。PLS方法用于多变量校准和噪音消除。处理该3种组分的荧光光谱数据,并实现了3种化合物的同时测定。设计了PDOSCWPTPLS程序执行相关计算,并对以上3种化学计量学方法进行了比较,其总体相对预测标准偏差分别为4.3%、7.7%、11.5%,结果表明DOSC-WPT-PLS法优于WPT-PLS法和PLS法。将该法用于测定自来水中邻苯二酚?间苯二酚和对苯二酚的含量,其回收率分别为99%~110%?95%~108%和98%~104%,结果满意。     

金电极上苯二酚异构体的电化学性质及同时测定

采用循环伏安法研究了邻苯二酚(CAT)、间苯二酚（RE）和对苯二酚(HQ)在0.5 mol/L硫酸水溶液中的电化学行为,循环伏安法和差分脉冲伏安法研究了CAT、RE 和HQ共存体系的伏安行为。 实验结果表明,在pH=0的硫酸水溶液中,扫描速率为10 mV/s,循环伏安法扫描电位在0～1.2 V（vs.Ag/Cl）时,分离效果明显。 本文采用差分脉冲伏安法,测定了CAT、RE和HQ的混合物,检出限依次为3.9×10-6、3.9×10-6和7.8×10-6 mol/L。 将该方法用于合成样品测定,其精密度和准确度均满足分析要求。     

卡尔曼滤波—紫外分光光度法同时快速测定4种嘌呤和嘧啶碱的含量

本文用卡尔曼滤波算法结合紫外分光光度法不经分离同时测定了腺嘌呤（Ａ），胸腺嘧啶（Ｔ），胞嘧啶（Ｃ），鸟嘌呤（Ｇ）４种含氮碱混合物中各成分的含量。测得模拟混合样品中各种碱的平均回收率范围１０１．８％－１０７．７％。也可用卡尔曼滤波算法鉴别别碱的种类。     

卡尔曼滤波-分光光度法用于复方雷琐辛涂剂中苯酚与间苯二酚的测定

本文研究了卡尔曼滤波-分光光度法及其在多组分混合物同时光度测定中的应用。测定复方雷琐辛涂剂中苯酚与间苯二酚,平均回收率分别为100.86%与98.76%。     

Electrochemical Sensing Platform Based on Lotus Stem-derived Porous Carbon for the Simultaneous Determination of Hydroquinone,Catechol and Nitrite

A simple and highly selective electrochemical sensor based on carbonized lotus stem (CLS) was developed for the simultaneous determination of hydroquinone (HQ), catechol (CC), and nitrite (NT) by using cyclic voltammetry (CV) and amperometry (AMP) methods. The CLS was characterized by the methods including field emission scanning electron microscopy (FE-SEM), Raman spectrum, FT-IR spectrum and X-ray diffraction (XRD). Brunauer-Emmett-Teller (BET) method was used to evaluate the pore structure and surface area of CLS. The oxidation peaks for HQ (116.2 mV), CC (220.1 mV), and NT (818.9 mV) were well separated under optimized conditions, which improved their simultaneous determination. The CLS modified electrode showed a good linear range between 1.0×10 ⁻⁶ to 7.0×10 ⁻⁴ M for HQ, and the detection limit was calculated as 0.15 μM. For CC the linear relationship was 1.0×10 ⁻⁶ to 3.0×10 ⁻³ M with the detection limit of 0.11 μM. For NT the linear relationship was 5.0×10 ⁻⁷ to 4.0×10 ⁻³ M with the detection limit of 0.09 μM. The results indicated that the intrinsic structure of natural biomass can be expected to design porous carbon for electrochemical sensors.     

Simultaneous Determination of Hydroquinone and Catechol by Differential Alternative Pulses Voltammetry

The second order voltammetric technique of high resolution, Differential Alternative Pulses Voltammetry (DAPV), was applied for the simultaneous determination of hydroquinone (HQ) and catechol (CC) on bare spectroscopic graphite electrode. Well resolved anodic and cathodic peaks situated on both sides of the zero line were obtained, while the differential pulse voltammograms were overlapped. The linear concentration range for HQ and CC quantification by DAPV was extended up to 20 μmol L⁻¹ for both the isomers. The sensitivity of the determination was found to be 6.00 μA L μmol⁻¹ and 3.61 μA L μmol⁻¹, while the limit of detection reached was 0.2 μmol L⁻¹ and 0.5 μmol L⁻¹ for HQ and CC, respectively. No interference was observed from the commonly coexisting organic species such as resorcinol, phenol and p‐benzoquinone. The great resolution power of DAPV permitted obtaining excellent results without any electrode modification and any mathematical data processing.     

Simultaneous Determination of Hydroquinone and Catechol at an Activated Glassy Carbon Electrode

A selective and very simple electrochemical method, based on anodization of a glassy carbon electrode (GCE), was developed for the simultaneous detection of hydroquinone (HQ) and catechol (CT). It was found that the activated GCE showed an excellent catalytic behavior and enhanced reversibility towards the oxidation of both HQ and CT. The redox responses from the mixture of HQ and CT were easily resolved at an activated GCE. The detection limits for HQ and CT were calculated to be 0.16 and 0.11 μM, respectively. The activated GCE was successfully examined for real sample analysis with tap water and it showed a stable and reliable recovery data.     

聚苯胺-石墨烯修饰玻碳电极同时测定邻苯二酚和对苯二酚

本文制备了聚苯胺-石墨烯修饰玻碳电极,并用循环伏安(CV)法和微分脉冲伏安(DPV)法研究了邻苯二酚(CC)和对苯二酚(HQ)在该修饰电极上的电化学行为。实验结果表明,相对于裸玻碳电极,HQ和CC在聚苯胺-石墨烯修饰电极上的氧化峰电流显著提高,氧化峰电位相差104.8mV,实现了CC和HQ的选择性测定。DPV法同时测定二酚时,HQ和CC分别在1.0×10-6~8.0×10-4 mol/L浓度范围内与其峰电流呈良好的线性关系,相关系数R分别为0.998、0.997,检出限(S/N=3)分别为1.0×10-7、8.0×10-8mol/L。将该方法用于模拟水样分析,回收率为95.3%~103.5%。     

A Novel Sensitive Electrochemical Sensor for the Simultaneous Determination of Hydroquinone and Catechol using Tryptophan-Functionalized Graphene

A novel tryptophan-functionalized graphene nanocomposite was employed for the simultaneous determination of hydroquinone and catechol. The analyte electrochemical behavior on the surface of tryptophan-functionalized graphene was investigated by cyclic voltammetry and differential pulse voltammetry. Compared to conventional graphene, enhanced peak currents were obtained that were attributed to the large number of defects on tryptophan-functionalized graphene that accelerated electron transfer between the electrode and analytes. The peak potential difference between hydroquinone and catechol at the tryptophan-functionalized graphene modified glassy carbon electrode was 104 millivolt, which was sufficiently wide to simultaneously determine hydroquinone and catechol. This method was used for the analysis of tap water.     

Enhanced Sensitive Electrochemical Sensor for Simultaneous Catechol and Hydroquinone Detection by Using Ultrasmall Ternary Pt-based Nanomaterial

The simple and effective method for the novel synthesis of Pt-based nanoparticle was presented with high efficiency. The sensitive catalyst for the simultaneous detection of catechol and hydroquinone was prepared by depositing ternary metal complex on fluorine-doped tin-oxide (FTO). The composition and morphology of nanomaterials were characterized by TEM, HRTEM, XRD, XPS, and EDS (energy dispersive spectroscopy). The size of the Pt-based nanomaterial was about 5±1 nm. The electrochemical performance of the modified catalyst was studied by CV, DPV, and EIS. The modified PtNiCu@FTO catalyst possessed good electro-oxidation activity for hydroquinone and catechol and used for simultaneous detection of catechol and hydroquinone at scan rate of 20 mV s⁻¹ (vs. Ag/AgCl). Detection responses were found in the ranges of 5–2900 μM for hydroquinone and 5–3000 μM for catechol. The detection limits (LOD) for HQ and CC were observed as 0.35 and 0.29 μM, respectively. The sensitivity of HQ and CC were 1515.55 and 1485 μA mM⁻¹ cm⁻², respectively. The prepared nanomaterial were effectively applied for the determination of CC and HQ in real samples.