Kinetics of the gas-phase reaction of acetone with iodine: Heat of formation and stabilization energy of the acetonyl radical

The kinetics of the gas-phase reaction CH₃COCH₃ + I₂ ? CH₃COCH₂I + HI have been measured spectrophotometrically in a static system over the temperature range 340–430°. The pressure of CH₃COCH₃ was varied from 15 to 330 torr and of I₂ from 4 to 48 torr, and the initial rate of the reaction was found to be consistent with \documentclass{article}\pagestyle{empty}\begin{document}$ {\rm CH}_3 {\rm COCH}_3 + {\rm I}^{\rm .} \stackrel{1}{\rightarrow}{\rm CH}_{\rm 3} {\rm COCH} + {\rm HI} $\end{document} as the rate-determining step. An Arrhenius plot of the variation of k₁ with temperature showed considerable scatter of the points, depending on the conditioning of the reaction vessel. After allowance for surface catalysis, the best line drawn by inspection yielded the Arrhenius equation, log [k₁/(M^?1 sec^?1)] = (11.2 ± 0.8) – (27.7 θ 2.3)/θ, where θ = 2.303 R T in kcal/mole. This activation energy yields an acetone C? H bond strength of 98 kcal/mole and δH (CH₃CO?H₂) radical = ?5.7 ± 2.6 kcal/mole. As the acetone bond strength is the same as the primary C? H bond strength in isopropyl alcohol, there is no resonance stabilization of the acetonyl radical due to delocalization of the radical site. By contrast, the isoelectronic allyl resonance energy is 10 kcal/mole, and reasons for the difference are discussed in terms of the π-bond energies of acetone and propene.     

Kinetics of the gas-phase reaction of cyclopropylcarbinyl iodide and hydrogen iodide. Heat of formation and stabilization energy of the cyclopropylcarbinyl radical

The rate of the gas phase reaction has been measured spectrophotometrically over the range 480°–550°K. The rate constant fits the equation where θ = 2.303RT in kcal/mole. This result, together with the assumption that the activation energy for the back reaction is 0 ± 1 kcal/mole, allows calculation of DH (Δ? CH₂? H) = 97.4 ± 1.6 kcal/mole and ΔH (Δ? CH₂·) = 51.1 ± 1.6 kcal/mole. These values correspond to a stabilization energy of 0.4 ± 1.6 kcal/mole in the cyclopropylcarbinyl radical.     

Kinetics and thermochemistry of the gas phase reaction of methyl ethyl ketone with iodine. I. The resonance energy of the methylacetonyl radical

The gas phase reaction of iodine (2.8–43.3 torr) with methyl ethyl ketone (MEK) (7.4–303.4 torr) has been studied over the temperature range 280–355°C in a static system. The initial rate of disappearance of I₂ is first order in MEK and half order in I₂. The rate-determining step is the abstraction of a secondary hydrogen atom by an iodine atom: where k₁ is given by and θ = 2.303RT in kcal/mole. This activation energy is equivalent to a secondary C? H bond strength of 92.3 ± 1.4 kcal/mole and ΔH of the methylacetonyl radical = -16.8 ± 1.7 kcal/mole. By comparison with 95 kcal/mole for the secondary C? H bond strength, when delocalization of the unpaired electron with a pi bond is not possible, the resonance stabilization of the methylacetonyl radical is calculated to be 2.7 ± 1.7 kcal/mole. This value is 10 kcal/mole less than the stabilization energy of the isoelectronic methylallyl radical. The difference in pi bond energies in the canonical forms of the methylacetonyl radical is shown to account for the variation in stabilization energies.     

Kinetics of iodination of hydrogen sulfide by iodine and the heat of formation of the SH radical

The kinetics of the gas-phase thermal iodination of hydrogen sulfide by I₂ to yield HSI and HI has been investigated in the temperature range 555–595 K. The reaction was found to proceed through an I atom and radical chain mechanism. Analysis of the kinetic data yields log k (l/mol·sec) = (11.1 ± 0.18) – (20.5 ± 0.44)/θ, where θ = 2.303 RT, in kcal/mol. Combining this result with the assumption E_?1 = 1 ± 1 kcal/mol and known values for the heat of formation of H₂S, I₂, and HI, ΔH_f,298⁰(SH) = 33.6 ± 1.1 kcal/mol is obtained. Then one can calculate the dissociation energy of the HS? H bond as 90.5 ± 1.1 kcal/mol with the well-known values for ΔH_f,298⁰ of H and H₂S.     

Kinetics of the I2-catalyzed isomerization of allyl chloride to cis- and trans-1-chloro-1-propene. The stabilization energy of the chloroallyl radical

The I₂-catalyzed isomerization of allyl chloride to cis- and trans- l-chloro-l-propene was measured in a static system in the temperature range 225–329°C. Propylene was found as a side product, mainly at the lower temperatures. The rate constant for an abstraction of a hydrogen atom from allyl chloride by an iodine atom was found to obey the equation log [k,/M^?1 sec^?1] = (10.5 ± 0.2) ?; (18.3 ± 10.4)/θ, where θ is 2.303RT in kcal/mole. Using this activation energy together with 1 ± 1 kcal/mole for the activation energy for the reaction of HI with alkyl radicals gives DH⁰ (CH₂CHCHCl? H) = 88.6 ± 1.1 kcal/mole, and 7.4 ± 1.5 kcal/mole as the stabilization energy (SE) of the chloroallyl radical. Using the results of Abell and Adolf on allyl fluoride and allyl bromide, we conclude DH⁰ (CH₂CHCHF? H) = 88.6 ± 1.1 and DH⁰ (CH₂CHCHBr? H) = 89.4 ± 1.1 kcal/ mole; the SE of the corresponding radicals are 7.4 ± 2.2 and 7.8 ± 1.5 kcal/mole. The bond dissociation energies of the C? H bonds in the allyl halides are similar to that of propene, while the SE values are about 2 kcal/mole less than in the allyl radical, resulting perhaps more from the stabilization of alkyl radicals by α-halogen atoms than from differences in the unsaturated systems.     

Kinetics of the gas-phase reaction of OH with HCl

The reaction of hydroxyl radicals with hydrogen chloride (reaction 1) has been studied experimentally using a pulsed-laser photolysis/pulsed-laser-induced fluorescence technique over a wide range of temperatures, 298-1015 K, and at pressures between 5.33 and 26.48 kPa. The bimolecular rate coefficient data set obtained for reaction 1 demonstrates no dependence on pressure and exhibits positive temperature dependence that can be represented with modified three-parameter Arrhenius expression within the experimental temperature range: k1 = 3.20 x 10(-15)T0.99 exp(-62 K/T) cm3 molecule(-1) s(-1). The potential-energy surface has been studied using quantum chemical methods, and a transition-state theory model has been developed for the reaction 1 on the basis of calculations and experimental data. The model results in modified three-parameter Arrhenius expressions: k1 = 8.81 x 10(-16)T1.16 exp(58 K/T) cm3 molecule(-1) s(-1) for the temperature range 200-1015 K and k1 = 6.84 x 10(-19)T2.12 exp(646 K/T) cm3 molecule(-1) s(-1) for the temperature dependence of the reaction 1 rate coefficient extrapolation to high temperatures (500-3000 K). A temperature dependence of the rate coefficient of the Cl + H2O --> HCl + OH reaction has been derived on the basis of the experimental data, modeling, and thermochemical information.     

Kinetics and products of the gas-phase reactions of the OH radical and O3 with allyl chloride and benzyl chloride at room temperature

The kinetics of the gas-phase reactions of allyl chloride and benzyl chloride with the OH radical and O₃ were investigated at 298 ± 2 K and atmospheric pressure. Direct measurements of the rate constants for reactions with ozone yielded values of ??(O₃ + allyl chloride) = (1.60 ± 0.18) × 10^?18 cm³ molecule^?1 s^?1 and ??(O₃ + benzyl chloride) < 6 × 10^?20 cm³ molecule^?1 s^?1. With the use of a relative rate technique and ethane as a scavenger of chlorine atoms produced in the OH radical reactions, rate constants of ??(OH + allyl chloride) = (1.69 ± 0.07) × 10^?11 cm³ molecule^?1 s^?1 and ??(OH + benzyl chloride) = (2.80 ± 0.19) × 10^?12 cm³ molecule^?1 s^?1 were measured. A study of the OH radical reaction with allyl chloride by long pathlength FT-IR absorption spectroscopy indicated that the co-products ClCH₂CHO and HCHO account for ca. 44% of the reaction, and along with the other products HOCH₂CHO, (ClCH₂)₂CO, and CH₂ ? CHCHO account for 84 ± 16% of the allyl chloride reacting. The data indicate that in one atmosphere of air in the presence of NO the chloroalkoxy radical formed following OH radical addition to the terminal carbon atom of the double bond decomposes to yield HOCH₂CHO and the CH₂Cl radical, which becomes a significant source of the Cl atoms involved in secondary reactions. A product study of the OH radical reaction with benzyl chloride identified only benzaldehyde and peroxybenzoyl nitrate in low yields (ca. 8% and ?4%, respectively), with the remainder of the products being unidentified.     

Kinetics and thermochemistry of the gas phase reaction of methyl ethyl ketone with iodine. II. The heat of formation and unimolecular decomposition of 2-iodo-3-butanone

Equilibrium constants for the reaction CH₃COCH₂CH₃ + I₂ ? CH₃COCHICH₃ + HI have been computed to fit the kinetics of the reaction of iodine atoms with methyl ethyl ketone. From a calculated value of S(CH₃COCHICH₃) = 93.9 ± 1.0 gibbs/mole and the experimental equilibrium constants, ΔH(CH₃COCHICH₃) is found to be ?38.2 ± 0.6 kcal/mole. The Δ(ΔH) value on substitution of a hydrogen atom by an iodine atom in the title compound is compared with that for isopropyl iodide. The relative instability of 2-iodo-3-butanone (3.4 kcal/mole) is presented as further evidence for intramolecular coulombic interaction between partial charges in polar molecules. The unimolecular decomposition of 2-iodo-3-butanone to methyl vinyl ketone and hydrogen iodide was also measured in the same system. This reaction is relatively slow compared to the formation of the above equilibrium. Rate constants for the reaction over the temperature range 281°–355°C fit the Arrhenius equation: where θ = 2.303RT kcal/mole. The stability of both the ground and transition states is discussed in comparing this activation energy with that reported for the unimolecular elimination of hydrogen iodide from other secondary iodides. The kinetics of the reaction of hydrogen iodide with methyl vinyl ketone were also measured. The addition of HI to the double bond is not rate controlling, but it may be shown that the rate of formation of 1-iodo-3-butanone is more rapid than that for 2-iodo-3-butanone. Both four- and six-center transition complexes and iodine atom-catalyzed addition are discussed in analyzing the relative rates.     

The kinetics and thermochemistry of the gas phase reaction of cyclopentadiene and iodine. Relevance to the heat of formation of cyclopentadienyl iodide and cyclopentadienyl radical

The rate of the reaction of cyclopentadiene with iodine has been followed spectrophotometrically over the temperature range 171.7° to 276.5°C. The reaction first proceeds almost to the point of equilibrium with cyclopentadienyl iodide and HI, although the final products are fulvalene and HI. Equilibrium constants obtained are those predicted by bond additivity. A third-law value of δH⁰_{f 298} (c-C₅H₅I,g) = 49 kcal/mole is obtained. Rate studies of the reaction up to the iodide equilibrium, yield values for the rate constant . Uncertainty in the Arrhenius parameters, as well as doubts as to the applicability of the usual assumption that E₃ = 1 ± 1 kcal/mole, make difficult an evaluation of total cyclopentadienyl stabilization energy (TSE) from these data. However, the value is probably 15 < TSE < 20.     

Kinetic study of the gas-phase reaction c-C5H8 + I2 ⇄ c-C5H6 + 2HI the heat of formation and the stabilization energy of the cyclopentenyl radical

The gas-phase dehydrogenation of cyclopentene to cyclopentadiene catalyzed by iodine in the range 178–283°C has been found to obey a rate law consistent with the slow rate-determining step, \documentclass{article}\pagestyle{empty}\begin{document}$ {\rm I} + {\rm c} - {\rm C}_5 {\rm H}_8 \stackrel{4}{\rightarrow}{\rm HI} + {\rm c} - {\rm C}_5 {\rm H}_7 $\end{document}, log [k₄/(1 mole^?1 sec^?1)] = 10.25 ± 0.08 - (12.26 ± 0.18)/θ, where θ = 2.303 R T in kcal/mole. Surface effects are not important. This value of E₄ leads to a value of DH = 82.3 ± 1 kcal/mole and ΔH_f298 = 38.4 ± 1 kcal/mole. From difference in bond strengths in the alkane and the alkene, the allylic resonance stabilization in the cyclopentenyl radical is 12.6 ± 1.0 kcal/mole, in excellent agreement with the value for the butenyl radical. Arrhenius parameters for the other steps in the mechanism are evaluated. The low value of A₄ (compared with A₄ for cyclopentane) suggests a “tighter” transition state for H-atom abstraction from alkenes than from alkanes.     

Features of the reaction of polyfluoroalkyl chlorolsulfites with allyl alcohol

Unlike the saturated aliphatic and aromatic alcohols, allyl alcohol under the same conditions reacts with polyfluoroalkyl chlorosulfites to form not ethers, but polyfluorinated alcohols. The exception is polyfluoroalkyl chlorosulfites with the chain length of more than five carbon atoms. Allyl ethers of polyfluorinated alcohols of general formula CH₂=CHCH₂OCH₂(CF₂CF₂)nH (n = 1–3) were obtained, when the reaction proceeded in the presence of potassium carbonate, owing to its participation in a specific orientation of the reaction centers in the resulting intermediate structure, which is easily transformed into allyl ethers of polyfluorinated alcohols.     

Kinetics of the gas-phase reaction between iodine and monogermane and the bond dissociation energy D(H3Ge?H)

The title reaction has been investigated in the temperature range of 403–446 K. Monoiodogermane and di-iodogermane together with hydrogen iodide were the main products, although at high conversions at least one other product was formed. GeH₃I is clearly the primary product. Initial rates were found to obey the rate law over a wide range of initial iodine and monogermane pressures. Secondary reactions (of GeH₃I with I₂) affect the subsequent kinetics, although at sufficiently high initial reactant ratios ([GeH₄]₀/[I₂]₀ ≥ 100) an integrated rate equation fits the data with the same rate constants as the initial rate expression. The observed kinetics are consistent with an iodine atom abstraction chain mechanism, and for the step log k₁ (dm³/mol·s) = (11.03 ± 0.13) – (52.3 ± 1.0 kJ/mol)/RT ln 10 has been deduced. From this the bond dissociation energy D(GeH₃? H) = 346 ± 10 kJ/mol (82.5 kcal/mol) is obtained. The significance of this value, together with derived values for Ge–Ge and Ge–C bond strengths, is discussed.     

Kinetics of the gas-phase reaction between iodine and trifluorosilane and the bond dissociation energy D(F3Si?H)

The title reaction has been investigated in the temperature range 667–715K. The only reaction products were trifluorosilyl iodide and hydrogen iodide. The rate law was obeyed over a wide range of iodine and trifluorosilane pressures. This expression is consistent with an iodine atom abstraction mechanism and for the step log k₁(dm³/mol·sec) = (11.54 ± 0.17) ? (130.5 ± 2.2 kJ/mol)/RT In 10 has been deduced. From this the bond dissociation energy D(F₃Si? H) = (419 ± 5) kJ/mol (100.1 kcal/mol) is obtained. The kinetic andthermochemical implications of this value are discussed.     

Kinetics of the gas-phase reaction between iodine and monosilane and the bond dissociation energy D(H3Si?H)

The title reaction has been investigated in the temperature range of 494–545 K. During the early stages of reaction the only observed products were silyl iodide and hydrogen iodide. Initial rates were found to obey the rate law over a wide range of initial iodine and monosilane pressures. Secondary reactions, most probably of SiH₃I with I₂, became more important as the reaction progressed. However, provided [SiH₄]₀/[I₂]₀ > 20, these secondary processes had a negligible effect on the kinetics, and an integrated rate expression could be used. These kinetics are consistent with an iodine atom abstraction chain mechanism, and for the step has been deduced. From this the bond dissociation energy D(SiH₃? H) = 378 ± 5 kJ/mol (90 kcal/mol) is obtained. The kinetic and thermochemical implications of this value, especially to the pyrolysis of monosilane, are discussed.     

Kinetics and mechanism of oxidation of allyl alcohol byN-bromosuccinimide

The kinetics of oxidation of allyl alcohol byN-bromosuccinimide (NBS) has been studied at 35 °C in aqueous medium. The reaction shows first order dependence on bothNBS and allyl alcohol. In fairly high acid concentration, there is no change in the rate of the reaction but at low acid concentration, the rate is considerably enhanced. There is no primary salt effect. At varying mercuric acetate concentrations, the rate constant remains the same. But in the absence of mercuric acetate, the rate is enhanced. The kinetic parameters,E _a,Arrhenius factorA, H, G and S have been calculated. A rate law in agreement with experimental results has been derived. A mechanism is proposed.

---

Kinetik und Mechanismus der Oxidation von Allylalkohol mixN-Bromsuccinimid

Zusammenfassung Die Kinetik der Oxidation von Allylalkohol mitN-Bromsuccinimid (NBS) wurde bei 35 °C in wäßrigem Medium untersucht. Die Reaktion zeigt erste Ordnung gegenüberNBS und Allylalkohol. Bei relativ hoher Säurekonzentration zeigt sich keine Änderung der Reaktionsgeschwindigkeit, bei niedriger Säurekonzentration wird die Reaktionsgeschwindigkeit beträchtlich erhöht. Es wurde kein primärer Salzeffekt festgestellt. Bei varriierender Quecksilberacetatkonzentration bleibt die Reaktionsgeschwindigkeit gleich, bei Abwesenheit von Quecksilberacetat wird jedoch die Geschwindigkeitskonstante erhöht. Die kinetischen Parameter,E _a, derArrheniusfaktorA, H , G und S wurden bestimmt. Ein Geschwindigkeitsgesetz in Übereinstimmung mit den experimentellen Befunden wurde abgeleitet und ein Mechanismus vorgeschlagen.

     

四氟乙烯齐聚体的反应: II.四氟乙烯五聚体和烯丙醇的反应及反应产物的转化

The reaction of perfluoro- (3, 4-dimethyl-3-ethylhexene-(2)) (1) with allyl alcohol under different conditions gave different products. Compound 1 reacted with sodium allyl alcoholate yielding 2-(1'-allyloxy-tetrafluoroethyl)-perfluoro(3-methyl-3-ethylpentene- (1))(2). In the presence of triethylamine, 1 reacted with allyl alcohol to give 2-allyloxy-perfluoro (3, 4-dimethy1-4-ethylhexene- (2))(3), and in the presence of acetone and K2CO3 to give compound 4. These reactions all gave allyl-3-trifluoromethyl-3- pentafluoroethyl-2,2-dihydro-pentafluorovalerate (5a) as byproduct. Compound 1 reacted with allyl alcohol in the presence of triethylamine at 20-22`C to give 2, at 30-35`C to give a mixture of 2 and 3 and at 35-40`C to give a mixture of 3 and 5a respectively. Compound 2 was transformed to compound 4 in acetone and in the psesence of K2CO3, \o\ compound 5a or 5b in the corresponding alcohol and to compound 6 on reacting with dimethylamine. Compound 2 as well as 3 was converted to perfluoro-(3-ethyl-2,3,4,5- tetramethyl-2,3-dihydrofuran) (7) by KF in sulpholane.     

Kinetics of the thermal unimolecular decomposition of hex-1-ene-3-yne. Heat of formation and resonance stabilization energy of the 3-ethenylpropargyl radical

The thermal unimolecular decomposition of hex-1-ene-3-yne (HEY) has been investigated over the temperature range 949–1230 K using the technique of very low-pressure pyrolysis (VLPP). One reaction pathway is the expected C₅? C₆ bond fission to form the resonance-stabilized 3-ethenylpropargyl radical. There is a concurrent process producing molecular hydrogen which probably occurs via the intermediate formation of hexatrienes and cyclohexa-1,3-diene. RRKM calculations yield the extrapolated high-pressure rate parameters at 1100 K given by the expressions 10^16.0±0.3 exp(?300.4 ± 12.6 kJ mol^?1/RT) s^?1 for bond fission and 10^13.2+0.4 exp(?247.7 ± 8.4 kJ mol^?1/RT) for the overall formation of hydrogen. The A factors were assigned from the results of previous studies of related alkynes, alkenes, and alkadienes. The activation energy for the bond fission reaction leads to ΔH [H₂CCHCC?H₂] = 391.9, DH [H₂CCHCCCH₂? H] = 363.3, and a resonance stabilization energy of 56.9 ± 14.0 kJ mol^?1 for the 3-ethenylpropargyl radical, based on a value of 420.2 kJ mol^?1 for the primary C? H bond dissociation energy in alkanes. Comparison with the revised value of 46.6 kJ mol^?1 for the resonance energy of the unsubstituted propargyl radical indicates that the ethenyl substituent (CH₂?CH) on the terminal carbon atom has only a small effect on the propargyl resonance energy. © John Wiley & Sons, Inc.     

Very low-pressure pyrolysis (VLPP) of but-1-yne the heat of formation and stabilization energy of the propargyl radical

The unimolecular decomposition of but-1-yne has been investigated over the temperature range of 1052° – 1152°K using the technique of very low-pressure pyrolysis (VLPP). The primary process is C? C bond fission yielding methyl and propargyl radicals. Application of RRKM theory shows that the experimental rate constants are consistent with the highpressure Arrhenius parameters given by where θ = 2.303 RT kcal/mol. The parameters are in good agreement with estimates based on shock-tube studies. The activation energy, combined with thermochemical data, leads to DH°[HCCCH₂? CH₃] = 76.0, ΔH(HCC?CH_2,g) = 81.4, and DH° [HCCCH₂? H] = 89.2, all in kcal/mol at 300°K. The stabilization energy of the propargyl radical SE° (HCC?CH₂) has been found to be 8.8 kcal/mol. Recent result for the shock-tube pyrolysis of some alkynes have been analyzed and shown to yield values for the heat of formation and stabilization energy of the propargyl radical in excellent agreement with the present work. From a consideration of all results it is recommended that ΔH(HCC?CH_2,g) = 81.5±1.0, DH[HCCCH₂? H] = 89.3 ± 1.0, and SE° (HCC?CH₂) = 8.7±1.0 kcal/mol.     

Very low-pressure pyrolysis (VLPP) of alkyl cyanides. II. n-propyl cyanide and isobutyl cyanide. The heat of formation and stabilization energy of the cyanomethyl radical

The very low-pressure pyrolysis (VLPP) technique has been used to study the pyrolysis of n-propyl cyanide over the temperature range of 1090–1250°K. Decomposition proceeds via two pathways, C₂? C₃ bond fission and C₃? C₄ bond fission, with the former accounting for >90% of the overall decomposition. Application of unimolecular reaction rate theory shows that the experimental unimolecular rate constants for C₂? C₃ fission are consistent with the high-pressure Arrhenius parameters given by where θ=2.303RT kcal/mole. The activation energy leads to DH₂₉₈⁰[C₂H₅? CH₂CN]=76.9±1.7 kcal/mole and ΔH(?H₂CN, g)=58.5±2.2 kcal/mole. The stabilization energy of the cyanomethyl radical has been found to be 5.1±2.6 kcal/mole, which is the same as the value for the α-cyanoethyl radical. This result suggests that DH[CH₂(CN)? H] ～ 93 kcal/mole, which is considerably higher than previously reported. The value obtained for ΔH_?⁰(?H₂CN) should be usable for prediction of the activation energy for C₂? C₃ fission in primary alkyl cyanides, and this has been confirmed by a study of the VLPP of isobutyl cyanide over the temperature range of 1011–1123°K. The decomposition reactions parallel those for n-propyl cyanide, and the experimental data for C₂? C₃ fission are compatible with the Arrhenius expression A significant finding of this work is that HCN elimination from either compound is practically nonexistent under the experimental conditions. Decomposition of the radical, CH₃CHCH₂CN, generated by C₃? C₄ fission in isobutyl cyanide, yields vinyl cyanide and not the expected product, crotonitrile. This may be explained by a radical isomerization involving either a 1,2-CN shift or a 1,2-H shift.     

Theoretical study on the gas-phase reaction of acetaldehyde with methoxy radical

Structural Chemistry - The reaction of acetaldehyde with methoxy radical has been investigated theoretically by means of quantum chemistry methods at the BMC-QCISD//B3LYP/6-311+G(d,p) level. The...