Cationic 1,2-vinyl addition polymerization of cyclic ketene acetals initiated by conventional acids

Pure 1,2-addition polymers, poly(2-methylene-1,3-dioxolane), 1b , poly(2-methylene-1,3-dioxane), 2b , and poly(2-methylene-5,5-dimethyl-1,3-dioxane), 3b , were prepared using the cationic initiators H₂SO₄, TiCl₄, BF₃, and also Ru(PPh₃)₃Cl₂. Small ester carbonyl bands in the IR spectra of 1b and 2b were observed when the polymerizations were performed at 80°C ( 1b ) and both 67 and 138°C ( 2b ) using Ru(PPh₃)₃Cl₂. The poly(cyclic ketene acetals) were stable if they were not exposed to acid and water. They were quite thermally stable and did not decompose until 290°C ( 1b ), 240°C ( 2b ), and 294°C ( 3b ). Different chemical shifts for axial and equatorial H and CH₃ on the ketal rings were found in the ¹H NMR spectrum of 3b at room temperature. High molecular weight 3b (M̄_n = 8.68 × 10⁴, M̄_w = 1.31 × 10⁵, M̄_z = 1.57 × 10⁵) was obtained upon cationic initiation by H₂SO₄. Poly(2-methylene-1,3-dioxane), 2b , underwent partial hydrolysis when Ru(PPh₃)₃Cl₂ and water were present in the polymer. The hydrolyzed products were 1,3-propanediol and a polymer containing both poly(2-methylene-1,3-dioxane) and polyketene units. The percentages of these two units in the hydrolyzed polymer were about 32% polyketene and 68% poly(2-methylene-1,3-dioxane). No crosslinked or aromatic structures were observed in the hydrolyzed products. The molecular weight of hydrolyzed polymer was M̄_n = 5740, M̄_w = 7260, and M̄_z = 9060. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3707–3716, 1997     

Rotational diffusion in aprotic and protic solvents

We present the orientational relaxation times in protic and aprotic solvents for rose bengal in its lowest excited singlet state. The method uses a mode locked dye laser for polarized excitation, and time correlated single photon counting for determination of the time resolved polarized fluorescence. The observed orientational decay for the dipolar aprotic solvents and the alcohols are in agreement with the values predicted by the Stokes-Einstein diffusion equation. In the latter solvents, volume and shape corrections must be made for attachment of the alcohol to the two anion sites of the dye molecule. The solvent N-methylformamide, however, shows rose bengal reorienting much faster than the alcohols. Our interpretation of this data suggests that agreement with the Stokes-Einstein equation (stick boundary conditions) is coincidental. We propose a solvent torque model in which the solvent interaction at each anion site of rose bengal controls the deviations from an expected slip boundary condition. This qualitative model is used to correlate our data as well as relevant data in the literature. The values in picoseconds for the observed orientational relaxation times are given in parenthesis; acetone (70), DMF (160), DMSO (420), MeOH (190), EtOH (450), isopropanol (840), NMF (500).     

2-Arylazo-1-vinylpyrroles: oligomerization in the presence of protic and aprotic acids

2-Arylazo-1-vinylpyrroles react with protic (CF₃COOH, HCl) and aprotic (BF₃) acids forming deeply colored oligomeric products consisting of soluble (in benzene, chloroform) and insoluble fractions with yields amounting to 73 %. According to the data from ¹H NMR and IR spectroscopy oligomerization takes place mainly at the 1-vinyl group with partial involvement of the pyrrole ring. The process is accompanied by capture of the catalyzing acids by the azo group, leading to strong polarization of the elementary unit with transfer of positive charge to the pyrrole ring, which thus becomes capable of further transformations with cross-linking of oligomeric chains. The obtained oligomers possess electric conductivity of 10⁻¹³-10⁻⁹ S/cm, which is increased to 4.8∙10⁻⁶ S/cm when the products are iodinated with iodine vapor.     

Proton solvation in protic and aprotic solvents

Protonation pattern strongly affects the properties of molecular systems. To determine protonation equilibria, proton solvation free energy, which is a central quantity in solution chemistry, needs to be known. In this study, proton affinities (PAs), electrostatic energies of solvation, and pK_A values were computed in protic and aprotic solvents. The proton solvation energy in acetonitrile (MeCN), methanol (MeOH), water, and dimethyl sulfoxide (DMSO) was determined from computed and measured pK_A values for a specially selected set of organic compounds. pK_A values were computed with high accuracy using a combination of quantum chemical and electrostatic approaches. Quantum chemical density functional theory computations were performed evaluating PA in the gas‐phase. The electrostatic contributions of solvation were computed solving the Poisson equation. The computations yield proton solvation free energies with high accuracy, which are in MeCN, MeOH, water, and DMSO ?255.1, ?265.9, ?266.3, and ?266.4 kcal/mol, respectively, where the value for water is close to the consensus value of ?265.9 kcal/mol. The pK_A values of MeCN, MeOH, and DMSO in water correlates well with the corresponding proton solvation energies in these liquids, indicating that the solvated proton was attached to a single solvent molecule. © 2016 Wiley Periodicals, Inc.     

New protic salts of aprotic polar solvents

Aprotic polar solvents such as DMF, acetonitrile or DMSO can be protonated to form stable triflate salts when treated with triflic acid. The reaction of the same solvents with N,N-bis(trifluoromethanesulfonyl)imide led to the isolation of the corresponding N,N-bis(trifluoromethanesulfonyl)imide salts.     

Preparation and radical ring-opening polymerization of exo-methylene substituted cyclic ketene acetals

Preparation and radical ring-opening polymerization of the exo-methylene substituted cyclic ketene acetals, 2,4-dimethylene-1,3-dioxolane ( I ) and 2,5-dimethylene-1,3-dioxane ( II ), were carried out. Ketene acetals I and II were prepared by dehydrohalogenation of the corresponding cyclic haloacetal with potassium tert-butoxide in tetrahydrofuran at –78°C and ambient temperature, respectively. I underwent radical polymerization with essentially quantitative ring-opening with di-tert-butyl peroxide in dimethylformamide at 120°C. On the other hand, II underwent both ring-opening polymerization and vinyl polymerization under the same conditions of the polymerization of I . The differences of polymerization behavior between I and II were also discussed.     

Photochemistry of 5-aminoquinoline in protic and aprotic solvents

Photophysical properties of 5-aminoquinoline (5AQ) have been investigated in various non-polar and polar (protic and aprotic) solvents using steady state and time resolved fluorescence. In aprotic solvents, the spectral maxima depend on the polarity. However, in protic solvents both the fluorescence intensity as well decay time show decrease depending on the hydrogen bonding ability of the solvent. The results suggest that photochemistry 5AQ is quite sensitive towards the polarity as well as protic character of the solvent.     

Photooxidation of Co-thiolato complexes in protic and aprotic solvents

Protic solvents decrease the susceptibility of the thiolate ligand in Co(III) thiolato complexes toward attack by singlet oxygen, but greatly increase the conversion of the peroxidic intermediate to the sulfenato product.     

Cationic ring-opening polymerizations of cyclic ketene acetals initiated by acids at high temperatures

Three unsubstituted cyclic ketene acetals (CKAs), 2-methylene-1,3-dioxolane, 1a , 2-methylene-1,3-dioxane, 2a , and 2-methylene-1,3-dioxepane, 3a , undergo exclusive 1,2-addition polymerization at low temperatures, and only poly(CKAs) are obtained. At higher temperatures, ring-opening polymerization (ROP) can be dominant, and polymers with a mixture of ester units and cyclic ketal units are obtained. When the temperature is raised closer to the ceiling temperature (T_c) of the 1,2-addition propagation reaction, 1,2-addition polymerization becomes reversible and ring-opened units are introduced to the polymer. The ceiling temperature of 1,2-addition polymerization varies with the ring size of the CKAs (lowest for 3a , highest for 2a ). At temperatures below 138°C, 2-methylene-1,3-dioxane, 2a , underwent 1,2-addition polymerization. Insoluble poly(2-methylene-1,3-dioxane) 100% 1,2-addition was obtained. At above 150°C, a soluble polymer was obtained containing a mixture of ring-opened ester units and 1,2-addition cyclic ketal units. 2-Methylene-1,3-dioxolane, 1a , polymerized only by the 1,2-addition route at temperatures below 30°C. At 67–80°C, an insoluble polymer was obtained, which contained mostly 1,2-addition units but small amounts of ester units were detected. At 133°C, a soluble polymer was obtained containing a substantial fraction of ring-opened ester units together with 1,2-addition cyclic ketal units. 2-Methylene-1,3-dioxepane, 3a , underwent partial ROP even at 20°C to give a soluble polymer containing ring-opened ester units and 1,2-addition cyclic ketal units. At −20°C, 3a gave an insoluble polymer with 1,2-addition units exclusively. Several catalysts were able to initiate the ROP of 1a, 2a , and 3a , including RuCl₂(PPh₃)₃, BF₃, TiCl₄, H₂SO₄, H₂SO₄ supported on carbon, (CH₃)₂CHCOOH, and CH₃COOH. The initiation by Lewis acids or protonic acids probably occurs through an initial protonation. The propagation step of the ROP proceeds via an S_N2 mechanism. The chain transfer and termination rates become faster at high temperatures, and this may be the primary reason for the low molecular weights (M_n ≤ 10³) observed for all ring-opening polymers. The effects of temperature, monomer and initiator concentration, water content, and polymerization time on the polymer structure have been investigated during the Ru(PPh₃)₃Cl₂-initiated polymerization of 2a . High monomer concentrations ([M]/[ln]) increase the molecular weight and decreased the amount of ring-opening. Higher initiator concentrations (Ru(PPh₃)₃Cl₂) and longer reaction times increase molecular weight in high temperature reactions. Successful copolymerization of 2a with hexamethylcyclotrisiloxane was initiated by BF₃OEt₂. The copolymer obtained displayed a broad molecular weight distribution; M̄_n = 6,490, M̄_w = 15,100, M̄_z = 44,900. This polymer had about 47 mol % of ( Me₂SiO ) units, 35 mol % of ring-opened units, and 18 mol % 1,2-addition units of 2a . © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3655–3671, 1997     

Cationic polymerization of cyclic ketene acetals via zwitterion formation with cyanoallene

This article deals with the polymerization of the cyclic ketene acetals (CKAs) 2‐methylene‐4‐phenyl‐1,3‐dioxolane (2), 2‐methylene‐4‐phenyl‐1,3‐dioxane (3), 4,7‐dimethyl‐2‐methylene‐1,3‐dioxepane (4), 2‐ethylidene‐4‐phenyl‐1,3‐dioxolane (5), 2‐phenylmethylene‐1,3‐dioxolane (6), and 2‐isopropylidene‐4‐phenyl‐1,3‐dioxolane (7) in the presence of cyanoallene (1). For 2 and 3, the homopolymerization of the CKAs proceeded without ring opening, and the number‐average molecular weights of the obtained polymers depended on the feed ratio of 1. However, the reactions of 1 with 4–7 afforded no polymers but did afford spirocyclic 1 : 1 adducts possessing cyclobutane rings. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2075–2081, 2000     

Selective recognition of alkyl pyranosides in protic and aprotic solvents

The design and synthesis of receptors capable of selective, noncovalent recognition of carbohydrates continues to be a signature challenge in bioorganic chemistry. We report a new generation of tripodal receptors incorporating three pyridine (compound 2) or quinoline (compound 3) rings around a central cyclohexane core for use in molecular recognition of monosaccharides in apolar and polar protic solvents. These tripodal receptors were investigated using (1)H NMR, UV, and fluorescence titrations in order to determine their binding abilities toward a set of octyl glycosides. Receptor 2 displayed the highest binding affinity reported to date for noncovalent 1:1 binding of an alpha-glucopyranoside in chloroform (Ka = 212,000 +/- 27,000 M(-1)) and an approximately 8-fold selectivity for the alpha anomer over the beta anomer of the glucopyranoside. Most importantly, 2 retained its micromolar range of affinities toward monosaccharides in a polar and highly competitive solvent (methanol). The quinoline variant 3 also displayed micromolar binding affinities for selected monosaccharides in methanol (as measured by fluorescence) that were generally smaller than those of 2. Compound 3 was found to follow a selectivity pattern similar to that of 2, displaying higher affinities for glucopyranosides than for other monosaccharides. The binding stoichiometry was estimated to be 1:1 for the complexes formed by both 2 and 3 with glucopyranosides, as determined by Job plots. Nuclear Overhauser effect spectroscopy allowed for the derivation of a binding model consistent with the observed selectivities.     

Kinetics and mechanism of bromination of cyclic acetals with 1,4-dioxane dibromide

It is shown that the reactivities of cyclic formals in the case of bromination with dioxane dibromide increase in the order 1,3-dioxepane > 1,3-dioxalane 1,3-dioxane, which is explained not only by steric factors but also by the ease of cleavage of the C₄-O₃ bond of the dioxacyclane ring. The bromination of cyclic acetals takes place through prior enolization of the cyclic acetal with subsequent electrophilic addition of bromine to the double bond.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 2, pp. 176–179, February, 1981.     

Mechanism of initiation of polymerization of cyclic ethers by tetrahydrofuranate of boron trifluoride

The mechanism of the initiation of polymerization of epichlorohydrin and its copolymerization with tetrahydrofuran, with boron trifluoride tetrahydrofuranate and triethyloxonium tetrafluoroborate, has been studied by [¹⁹F]NMR. It was shown that the initiation by Lewis acid resulted in the formation of an active centre of zwitterionic nature.     

Syntheses and radical ring-opening polymerization behavior of vinylcyclopropanone cyclic acetals having exomethylene and phenyl groups

Syntheses and radical ring-opening polymerizations of vinylcyclopropanone derivertives having cyclic six-membered acetal, exomethylene, and phenyl groups; 1-vinyl-6-methylene-4,8-dioxaspiro[2.5&]octane ( 2b ), 1-vinyl-5,7-dimethyl-6-methylene-4,8-dioxaspiro[2.5]octane ( 2c ), 1-vinyl-5-phenyl-4,8-dioxaspiro[2.5]octane ( 2d ), and 1-vinyl-5,7-diphenyl-4,8-dioxaspiro[2.5]octane ( 2e ), were carried out. The monomers were prepared by reactions of 1,1-dichloro-2-vinylcyclopropane and the corresponding diols in DMF in the presence of sodium hydride. Radical polymerizations of 2b – 2e were carried out at 60, 80, and 120°C in the presence of an appropriate initiator (3 mol % vs. monomer) in degassed sealed ampoules for 20 h. Although colorless transparent polymers (M̄_n 2300–13,500) were isolated by preparative HPLC for the most monomers, a crosslinked polymer was obtained in the case of 2b . The structures of the polymers were determined to consist of single and double ring-opening units. The content of the double ring-opened unit was 25–75% by comparison of IR spectra to a model compound. It is suggested that the double ring-opened propagating chain end is stabilized by the substituents on the cyclic acetal rings. The two-center energies of the cyclopropane ring and activation energy of ring-opening calculated by molecular orbital methods may explain the selectivity in the cleavage of the cyclopropane ring, and the degree of double ring-opening. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2501–2512, 1997     

Regularities of anodic acetoxylation of 1,4-dimethoxybenzene in protic and aprotic media

Electrochemical acetoxylation of 1,4-dimethoxybenzene during amperostatic electrolysis in an undivided cell at Pt electrodes in MeCN or MeOH solutions containing Et₄NOAc gives 2,5-dimethoxyphenyl acetate if AcOH or CH₂Cl₂ co-solvent has been added in a concentration of ≥50%. The reaction mechanism includes a nucleophilic attack of AcO⁻ ion on the ipso-position of 1,4-dimethoxybenzene radical cation. The process efficiency depends on factors that determine the stability and reactivity of the intermediate 1,4-dimethoxy-1-acetoxyarenonium cation. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1534–1538, July, 2005.     

Stable polymers from cyclic ketene acetals: Cationic polymerization initiated by acid-washed glassware or acid-washed glass beads

Stable polymers were made by the cationic 1,2-polymerization of cyclic ketene acetals initiated by acid-washed glassware or acid-washed glass beads. Among several reactions possible for the very reactive cyclic ketene acetals, only the corresponding acetals of polyketene were formed. These structures were demonstrated by FTIR, ¹H-NMR, and ¹³C-NMR analyses. © 1996 John Wiley & Sons, Inc.     

Synthesis of dimethyl acetals. diethyl acetals. and cyclic acetals catalyzed by aminopropylated silica gel hydrochloride (APSG-HCL)

The aminopropylated Silica-Gel hydrochloride (APSG.HCl) proved to be an efficient catalyst for the rapid conversion of carbonyl compounds in the corresponding acetals with high yields and in mild and selective conditions. In addition to the obvious advantages offered by heterogeneous catalysis, the present method results very useful when the presence of a weakly-acidic function chemically bonded on the catalyst surface (alkyl ammonium salt). is necessary (compounds which contains functions unstable in acidic media).     

The mechanism of reaction of ebselen with superoxide in aprotic solvents as examined by cyclic voltammetry and ESR

The mechanism of the redox reaction of ebselen with superoxide was investigated using both ESR and electrochemical techniques. The reaction with superoxide in aprotic solvents was followed by means of cyclic voltammetry and ESR spin-trapping. A decrease in the oxidation current due to superoxide as a result of the addition of ebselen was clearly observed in the cyclic voltammograms. Ebselen reduced the ESR signal intensity of 5,5-dimethyl-1-pyrroline N-oxide (DMPO)-superoxide in a dose-dependent manner. The formation of an amidyl radical in this redox reaction was confirmed by rapid mixing continuous-flow ESR. The selenonate form and the seleninate form of ebselen were identified as the final products of the reaction of ebselen with superoxide. The following mechanism for this redox reaction can be proposed: First, ebselen reacts with superoxide and is converted to an ebselen anion radical; second, the ebselen anion radical reacts with superoxide and is converted to the amidyl radical. Hydrogen abstraction by the amidyl radical occurs and gives both a seleninate form and a selenonate form.     

Photolysis of acetyl esters of 2,2′-dinitrodiphenyl-carbinols in protic and aprotic solvents

Irradiation ofacetyl esters of 2,2′-dinitrodiphenyl-carbinols (1a-d) in aprotic medium like 2-propanol yielded dibenzol [c,f]-[1,2]diazepin-11-one-5-oxides (5a-d) as the major product. Dibenzoi[c,f]-[1,2]diazepin-11-one (2a-d), 2,2′-dinitrobenzophenones (3a-d), 2-amino-2′-nitrobenzophenones (4a-d), and N-hydroxyacridones (6a-d) were also formed in varying amounts. Irradiation of 1a-d in an aprotic medium like benzene yielded the above products along with benzisoxazoles (7a-d) also. When triethylamine was used as the solvent the major product obtained was N-hydroxyacridones (6a-d). Plausible mechanisms for the formation of the products are discussed