Characterization of cellulose acetates by nuclear magnetic resonance

An NMR method for determining the distribution of acetyl groups in cellulose acetates was developed. Treatment of cellulose acetates with acetyl-d₃ chloride gave products having simple spectra which could be analyzed quantitatively to give the distribution of acetyl groups in the original sample. The method was applied to studying (1) the hydrolysis of cellulose triacetate with ammonia, (2) the acetylation of cellulose acetate with acetyl chloride, and (3) the acetylation of cellulose acetate with acetic anhydride.     

The reaction of propane sultone with cuanosine,adenosine, and related compounds

Propane sultone (3-hydroxypropanesulfonic acid-γ-lactone) which is a monofunctional directacting alkylating carcinogen, has been shown to react irreversibly with DNA from various sources in vitro. It reacts with guanosine in DMSO to yield the N-7 alkyl nucleoside, while reaction with 2′-deoxyguanosine yields the corresponding N-7 alkyl purine. Evidence for the structure of these products and of one formed when adenosine and propane sultone react is presented.     

Facilitated olefin transport by reversible olefin coordination to silver ions in a dry cellulose acetate membrane

The highly selective dry complex membrane AgBF4-cellulose acetate (CA) was prepared and tested for the separation of ethylene/ethane and propylene/propane mixtures. The maximum selectivity for olefin over paraffin was found to be 280 for the ethylene/ethane mixture and 200 for the propylene/propane mixture. Solid-state interactions of AgBF4 with cellulose acetate (CA) and/or olefins have been investigated by using FT-IR, UV, and X-ray photoelectron spectroscopy (XPS). FT-IR and XPS studies clearly show that the silver ions are coordinated by carbonyl oxygen atoms among three different types of oxygen atoms present in CA-two in the acetate group and one in the ether linkage. Upon incorporation of AgBF4 into CA, the carbonyl stretching frequency of the free cellulose acetate at 1750 cm(-1) shifts to a lower frequency by about 41 cm(-1). The binding energy corresponding to a carbonyl oxygen atom in the O 1s XPS spectrum shifts to a more positive binding energy by the incorporation of AgBF4. Reversible olefin coordination to silver ions has been observed by FT-IR and UV studies. Treatment of the AgBF4-CA membrane placed in a gas cell with propylene produces a propylene-coordinated membrane in which coordinated propylene is easily replaced by other olefins such as 1,3-butadiene.     

Interaction of ozone with microfibrous materials

Ozone decomposition with commercial and prototype filtering microfibrous material based on some polymers, fiberglass, and polymer-carbonized fibers was studied. Ozone treatment leads to degradation of polystyrene, polyvinyl chloride, cellulose acetate, and carbon fibers; polyacrylonitrile fibers are stable under the experimental conditions.     

Synthesis of Cationic and Ampholytic Starch Graft Acrylamide and their Aqueous Salt Absorption

Acrylamide was grafted onto starch using ceric(IV) ion as initiator. Starch–graft-polyacrylamide was then modified through Mannich reaction using formaldehyde and diethylamine to give poly(N, N′-[(diethylamino) methyl]-acrylamide). The modified-graft copolymer was quaternized using different reagents; methyl iodide, n-butylbromide, sodium chloroacetate and propane sultone to give cationic and ampholytic graft materials. The absorbing properties of the produced materials toward deionized water and aqueous salt solutions were investigated. Studies of the absorbing properties of polyampholytes have revealed that these materials do not shrink upon increasing salt concentration. Kinetics of swelling in deionized water is also discussed.     

Material design of retardation films with extraordinary wavelength dispersion of orientation birefringence: a review

Orientation birefringence and its wavelength dispersion for various types of cellulose esters are reviewed. Cellulose esters such as cellulose acetate propionate and cellulose acetate butyrate show positive orientation birefringence with extraordinary wavelength dispersion, which is determined mainly by the ester groups rather than the main chains. The acetyl group provides negative orientation birefringence with strong ordinary wavelength dispersion, whereas the propionyl and butyryl groups give positive orientation birefringence with weak wavelength dispersion. Although all groups show ordinary wavelength dispersion, the summation of their orientation birefringences gives extraordinary dispersion. Moreover, the wavelength dispersion is dependent on the stretching ratio due to the difference in the orientation relaxation of each group. On the contrary, cellulose triacetate (CTA) shows negative birefringence with ordinary wavelength dispersion because it has no positive contribution. However, doping a plasticizer having positive orientation birefringence changes the orientation birefringence of CTA from negative to positive, and the wavelength dispersion from ordinary to extraordinary. This is attributed to the cooperative orientation of plasticizer molecules to the stretching direction with CTA chains, known as nematic interaction upon a hot drawing process.     

Hydrophobically modified poly(vinyl alcohol) using alkoxy‐substituted methyl gallate: Synthesis and rheology

Hydrophobically modified poly(vinyl alcohol) (HMPVA) polymers were synthesized by potassium t‐butoxide‐catalyzed reaction of PVA with methyl 3,4,5‐tris(n‐octyloxy) benzoate (MGC₈)/3,4,5‐tris(n‐dodecyloxy) benzoate (MGC₁₂) and 1,3‐propane sultone. The concentration of 1,3‐propane sultone was kept constant at 10 mol % and that of MGC₈ (2, 3, and 4 mol %)/MGC₁₂ (2 and 3 mol %) was varied to obtain HMPVAs with different hydrophobic contents. The incorporation of MGC₈/MGC₁₂ and 1,3‐propane sultone onto HMPVA was confirmed by NMR spectroscopy. Rheological properties of aqueous solutions also confirmed the presence of hydrophobic and charged functional groups on HMPVAs. In the semidilute regime, the specific viscosity of HMPVAs followed concentration scaling that is typical of polyelectrolytes. At higher concentrations, the HMPVA solutions with 3 and 4 mol % of MGC₈ exhibited large increase in specific viscosity. Oscillatory experiments on these solutions exhibited gel‐like behavior at polymer concentrations of 40–50 g/L. Confocal microscopy images of HMPVA with 4 mol % of MGC₈ clearly indicated the existence of microgels. The tendency of formation of microgels further increased with increasing chain length of the hydrophobe, that is, with MGC₁₂. These samples exhibited rheological behavior that is typical of soft solids and was therefore probed by the strain‐rate frequency superposition technique reported recently in the literature. HMPVAs with improved rheological properties show potential applications as thickeners in cosmetic creams, lotions and as drug carriers in pharmaceutical formulations. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1054–1063, 2010     

Cellulose acetate graft copolymers with nano-structured architectures: Synthesis and characterization

Cellulose acetate is a very good film-forming polymer with major applications in cigarette filters, photographic films, cosmetics and pharmaceutics formulations and membrane separation processes. Nevertheless, its rigidity and relative hydrophobic character can be limiting drawbacks for some applications. In this work, new cellulose acetate materials with highly flexible and hydrophilic grafts were obtained with different hydrophilic/hydrophobic balances. Cellulose acetate was grafted with methyl diethylene glycol methacrylate (MDEGMA) from brominated macroinitiators by atom transfer radical polymerization (ATRP) in two steps. The first step consisted of introducing ATRP initiator groups on cellulose acetate by reacting hydroxyl side groups with 2-bromoisobutyryl bromide. A preliminary study was then carried out to determine the experimental conditions for the controlled ATRP of MDEGMA homopolymerization in a solvent (cyclopentanone) compatible with cellulose acetate grafting. In these conditions, the MDEGMA homopolymerization followed Hanns Fischer’s kinetics model accounting for the radical persistent effect. The ATRP grafting was then investigated for two cellulose acetate macroinitiators differing in the number of their ATRP initiator groups. Two families of graft copolymers with nano-structured architectures were obtained. The first family corresponded to copolymers with a high number of short grafts. The copolymers of the second family had almost the same graft weight fractions but a small number of long grafts. The morphology of the graft copolymers was then investigated by synchrotron X-ray scattering. The most informative results showed that the phase segregation depended upon the number and length of the poly(MDEGMA) grafts. The copolymer with 44 wt.% of long grafts showed a segregated morphology of nano-domains with sharp interfaces and a radius of gyration of 11.5 nm (from Guinier’s law). These cellulose acetate copolymers eventually led to strong films with potential applications in membrane separations.     

Dioxouranium (VI) complexes with cellulose acetate

Dioxouranium [UO₂(VI)] complexes with three degrees of substitution of cellulose acetate, prepared from viscose pulp (DS = 2.2, 2.45 and 2.86), have been synthesis and characterized. Degree of substitution (DS) is defined as the average number of CH groups substituted on each anhydrocellulose repeat unit. Probable structures of the cellulose acetate complexes were inferred from the elemental analysis data, conductance measurements, IR, electronic and ¹H NMR spectra. The results obtained show that the formula of UO₂(VI) complex with cellulose acetate of DS = 2.2 and 2.45 [(CA)₄.UO₂] is more probable than [(CA)₂.UO₂].2(CH₃COO), while the reverse is true for the case of a UO₂ complex with CA of DS = 2.86. For the former formula, cellulose acetate acts as a uni-negatively charged bidentate ligand and reacts with UO₂²⁺ through the ether-carbon-oxygen of the secondary acetylated hydroxyl group of the anhydroglucose unit and the oxygen atom of the residual secondary unacetylated hydroxyl group, forming a five-membered chelate ring. For the later formula, cellulose acetate of DS = 2.86 acts as a neutral bidentate chelating agent through the two ether oxygen atoms of the vicinal ester groups of secondary acetylated hydroxyl groups in anhydroglucose units also forming a five-membered chelate ring. The uranium atom in these complexes is 8-coordinate. The thermal behaviour of cellulose diacetate (DS = 2.2) and cellulose triacetate (DS = 2.86) and their complexes with uranyl acetate in nitrogen atmosphere has been also studied by differential thermal analysis from room temperature to 600 °C. The obtained DTA curves were analyzed using the Prout-Tompkins law. The method of least squares was applied to estimate the appropriate order of the reaction (n), and consequently the thermodynamic parameters. The results revealed that chelation of cellulose acetate with uranyl acetate led to increased thermal stability.     

ESCA study of polymer surfaces treated by plasma

Surfaces of polymers [polyethylene, polystyrene, poly(ethylene terephthalate), poly(oxymethylene), cellulose acetate, polyacrylonitrile, nylon 6, and polytetrafluoroethylene] treated with argon (inert) and nitrogen (reactive) plasma were examined by ESCA (electron spectroscopy for chemical analysis). Argon plasma treatment generally introduces oxygen functionalities into the polymer surface. Nitrogen treatment generally incorporates nitrogen and oxygen functionalities into the treated surface. The extent of oxygen incorporation is typically less than that produced by argon plasma. When nitrogen and oxygen functional groups are already in a polymer structure, the extent of additional incorporation of these two elements as a result of plasma treatment is very much less than with other polymers. Polymers which contain only one of the elements tend to incorporate the other element to much the same degree as polymers without either element initially present.     

Carbonization of Polyacrylonitrile Composites with Nitrogen-containing Cellulose Derivatives

Thermal carbonization of nitrogen-containing cellulose derivatives (chitin, chitosan, cyanoethyl chitosan, cyanoethyl cellulose, copolymers of allyl carboxymethyl cellulose with polyacrylonitrile) as models of probable products of thermal reaction of cellulose with polyacrylonitrile was studied. The quantitative characteristics of carbonization of the model compounds are influenced by the nitrile group.     

Liquid-Chromatographie von Alkoholen auf mikrokristalliner Cellulose

In “liquid chromatography” (LC), a stationary phase of microcrystalline cellulose is suitable for the separation of polyhydric alcohols such as glycerine, ethylene glycol, propane diol and butane diol when using a solvent mixture of ethyl acetate and n-propanol, saturated with approx. 15% of water. When using benzene as solvent, the monohydric alcohols C₁-C₅ can also be separated on the same column. Differential refractometers and micro adsorption detectors are suitable for detection.     

The reaction of 4-(p-nitrobenzyl)pyridine with some electrophiles

The nucleophile 4-(p-nitrobenzyl)pyridine was allowed to react with four carcinogenic alkylating agents, chloromethyl methyl ether, bis(chloromethyl) ether, glycol sulfate and propane sultone, one carcinogenic acylating agent, N,N-dimethylcarbamyl chloride, and one noncarcinogenic electrophile, perchlorocyclobutenone. The structures of the major products formed, which are substituted pyridinium salts or 1,4-dihydropyridines, were determined.     

Preparation and characterization of cellulose acetate/polysiloxane composites

Composites of cellulose acetate and polysiloxane were prepared using 3-isocyanatepropyltriethoxysilane, as a coupling agent. The structure, the thermal and dynamic-mechanical behaviors, and the morphology of the obtained composites were investigated. The composites showed phase separation which was confirmed by the presence of siloxane micro- and nano-domains dispersed in the cellulose acetate matrix, with good interfacial adhesion between the phases. The results demonstrated that the incorporation of a polysiloxane phase on a cellulose acetate matrix caused a decrease in the glass transition temperature, storage modulus and hardness. The proposed methodology was seen to be convenient for the preparation of cellulose acetate/polysiloxane composites with useful properties.     

香豆素衍生物在数种薄层基质上的室温磷光发射特性

考查了二十多种香豆素衍生物在国产ＭＮ－Ｐ型和ＭＮ－Ｃ型微晶纤维素膜，ＤＥＡＥ离子交换膜上的室温磷光发射特性，并与用滤纸作基质时的结果作了比较。在这些基质上，多数衍生物都能发射不同强度的ＲＴＰ信号，且在其ＲＴＰ特性间呈现，某些取代基效应。从发光稳定性和信背比考虑，ＭＮ－Ｃ型比ＭＮ－Ｐ型膜更适合于这些衍生物的ＲＴＰ发射。     

Self-assembled micelles based on hydrophobically modified quaternized cellulose for drug delivery

Novel amphiphilic cationic cellulose (HMQC) derivatives carrying long chain alkyl groups as hydrophobic moieties and quaternary ammonium groups as hydrophilic moieties were synthesized. Structure and properties of the amphiphilic cellulose derivatives were characterized by elemental analysis, FT-IR, (1)H NMR, ζ-potential measurement, dynamic light scattering (DLS), fluorescence spectroscopy and transmission electron microscopy (TEM). The results revealed that HMQCs can be self-assembled into cationic micelles in distilled water with the average hydrodynamic radius of 320-430 nm. The cytotoxicity study showed that the HMQC exhibited low cytotoxicity. Prednisone acetate, a water insoluble anti-inflammation drug, was chosen as a model drug to investigate the utilization of self-assembled HMQC micelles as a delivery carrier for poorly water-soluble drugs. The study indicated that the prednisone acetate could be incorporated effectively in the self-assembled HMQC micelles and be controlled released.     

Features of complexing of molecular NMR relaxation probes with cellulose acetates in solutions

The method of active and inert NMR relaxation probes can be used for determining the degree of substitution of cellulose acetates. The formation of hydrogen bonds between the hydroxyl and acetate groups of cellulose acetate is more probable than between the hydroxyl groups, which results in relative large shielding of the free OH groups in the polymer in samples with high degrees of substitution.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 8, pp. 1761–1765, August, 1989.We would like to thank N. I. Naimark for providing the samples of the cellulose acetates.     

Preparations of regioselectively methylated cellulose acetates and their 1H and 13C NMR spectroscopic analyses

Seven possible regioselectively methylated cellulose acetates (RS‐MCAs)—2,3,6‐tri‐O‐methyl cellulose acetate, 3,6‐di‐O‐methyl cellulose acetate, 2,6‐di‐O‐methyl cellulose acetate, 2,3‐di‐O‐methyl cellulose acetate, 6‐O‐methyl cellulose acetate, 3‐O‐methyl cellulose acetate, and 2‐O‐methyl cellulose acetate—were prepared for the first time from chemically synthesized cellulose derivatives obtained by cationic ring‐opening polymerization and then were analyzed by ¹H and ¹³C NMR spectroscopy. The chemical shifts of ring protons and carbons were influenced by substituent groups (methyl or acetyl) and clearly reflected the pattern of substituent distribution in anhydroglucose units. These data may conveniently be used for the determination of the substituent distribution of methyl cellulose. The synthesized RS‐MCAs also may be used for the elucidation of the structure–property relationship. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4167–4179, 2002     

Use of Enzymatic Digestion and Chemical Methylation Followed by Matrix-assisted Laser Desorption/Ionisation (MALDI) Mass Spectrometry to Sequence a 60kDa Commercial Fraction of Cellulose Acetate

Cellulose acetate was characterized by using enzyme in both digestion and chemical derivation and acetolysis. The fragments were normalised and compared on an anhydroglucose scale, using mass spectrometry to identify the different sized fragments. It was determined that at least two sub-populations for cellulose acetate existed within the parent. The macroscopic effect of this variation in the degree of acetylation will be a modification of the structural properties of the polymer chains. It was found that through comparison with enzyme-based degradation, an estimation of the acetylation topography of the cellulose acetate fraction could be made. Enzyme degradation produced a number of oligosaccharides of more than 10 glucose units, presumably resistant to enzyme degradation because they contained acetate groups. Chemical hydrolysis gave a random ladder of short sequences of mainly 3–4 glucose units some of which had a high methyl ether content, that were analysed by mass and converted to an anhydroglucose mass scale. This approach could be used to demonstrate differences between large biopolymers of cellulose acetate that previously gave an overall average rather than a specific ladder average.     

Cellulose acetate as stationary phase in microcolumn LC

The retention characteristics of alkylbenzenes and polycyclic aromatic hydrocarbons (PAHs) have been examined in liquid chromatography on a microcapillary column packed with cellulose acetate. Particulate and fibrous cellulose acetate were used as the stationary phase. Fibrous cellulose diacetate was found to be of use as an alternative stationary phase for liquid chromatography, although the separation efficiency was low. The retention characteristics for planar PAHs were linearly correlated with the size of the molecules, but the retention behavior for alkylbenzenes and nonplanar PAHs was affected by exclusion. The retention order was strongly influenced by the addition of dimethylformamide or water to methanol in the mobile phase. The results suggested that the retention behavior is influenced by a slight change in the polymer matrix of cellulose acetate.