Oxidative dimerization of aromatic amines using tBuOI: entry to unsymmetric aromatic azo compounds

It's all the hype: An oxidative dimerization reaction of aromatic amines utilizing tert-butyl hypoiodite (tBuOI) under mild reaction conditions leads to aromatic azo compounds. The method allows access to unsymmetric aromatic azo compounds, which are difficult to prepare by conventional synthetic methods, in a selective manner.     

Preparation of cellulose and cellulose derivative azo compounds

Wood pulp and cotton linter are the most common sources of cellulose forindustrial use. Methyl cellulose (MC) and cellulose sulfate (CS) were preparedusing bleached wood pulp and cotton linter. Coloured azo compounds were alsoprepared from coupling cellulose, wood pulp, MC and CS with aromatic diazoniumsalt. The presence of electron-releasing or withdrawing substituents affectedthe electrophilic substitution reaction. The produced azo compounds werecharacterized by FT-IR methodology, as well as mass spectrometry, in which thefunctional groups and the ion fragments of the products were analyzed.     

Palladium-catalyzed synthesis of aryl ketones by coupling of aryl bromides with an acyl anion equivalent

Palladium-catalyzed couplings of aryl bromides with N-tert-butylhydrazones as acyl anion equivalents to form aryl ketones are reported. The coupling process occurs at the C-position of hydrazones to form N-tert-butyl azo compounds. Isomerization of these azo compounds to the corresponding hydrazones, followed by hydrolysis, gave the desired mixed alkyl aryl ketones. The selectivity of C- versus N-arylation was strongly influenced by the substituent on nitrogen. Arylation at carbon occurred with N-tert-butylhydrazones, whereas N-arylation occurred with N-arylhydrazones. The arylation of hydrazones containing primary and secondary alkyl groups, as well as aryl groups, gave the desired ketones in good yields after hydrolysis. Functional groups on the aromatic ring, such as alkoxy, cyano, trifluoromethyl, carboalkoxy, carbamoyl, and keto groups, were tolerated. This reaction likely occurs by C-C bond-forming reductive elimination from an intermediate containing an eta1-diazaallyl ligand.     

Copper Nanoparticles on Graphene Support: An Efficient Photocatalyst for Coupling of Nitroaromatics in Visible Light

Copper is a low‐cost plasmonic metal. Efficient photocatalysts of copper nanoparticles on graphene support are successfully developed for controllably catalyzing the coupling reactions of aromatic nitro compounds to the corresponding azoxy or azo compounds under visible‐light irradiation. The coupling of nitrobenzene produces azoxybenzene with a yield of 90 % at 60 °C, but azobenzene with a yield of 96 % at 90 °C. When irradiated with natural sunlight (mean light intensity of 0.044 W cm⁻²) at about 35 °C, 70 % of the nitrobenzene is converted and 57 % of the product is azobenzene. The electrons of the copper nanoparticles gain the energy of the incident light through a localized surface plasmon resonance effect and photoexcitation of the bound electrons. The excited energetic electrons at the surface of the copper nanoparticles facilitate the cleavage of the N O bonds in the aromatic nitro compounds. Hence, the catalyzed coupling reaction can proceed under light irradiation and moderate conditions. This study provides a green photocatalytic route for the production of azo compounds and highlights a potential application for graphene.     

聚苯乙烯基偶氮聚合物的合成研究

改进了聚苯乙烯的硝化、还原、重氮化和偶合反应路线 (NRDC) ,使每步反应都得到很高的产率 ,并利用大分子重氮盐 (MDS)分别与苯胺、N 烃基苯胺和酚等三类化合物偶合 ,得到相应的聚苯乙烯基偶氮聚合物 .核磁共振分析结果证明了产物的高偶联率 .通过对大分子重氮盐热稳定性的研究 ,发现偶合反应之后需要一步加热反应以消除残余重氮基团 .还研究了这些聚合物的紫外 可见吸收光谱性质 ,氨 (胺 )基偶氮产物的水溶液表现出了明显的pH敏感性     

A highly active nano-palladium catalyst for the preparation of aromatic azos under mild conditions

A worm-like Pd nanocatalyst has been prepared and used in the preparation of azo compounds from nitroaromatics under mild reaction conditions. This highly dispersible nano-Pd catalyst shows high activity toward the synthesis of both symmetric aromatic azo compounds and a range of asymmetric aromatic azo compounds.     

Ultrasound assisted diazotization and diazo coupling reactions using trichlorotriazine

A high rate and efficient procedure for the synthesis of azo dyes has been developed. This concluded the sequential diazotization-diazo condensation of aromatic amines such as 4,4′-sulfonyldianiline with NaNO₂, or trichlorotriazine with coupling agents under ultrasound irradiation at room temperature. This method applied to several types of coupling agents led to corresponding azo dyes in high yield within short reaction time. The mild reaction conditions and inexpensive procedure are clear advantages of this method.     

Fluorescence of noncyclic azo compounds with a low-lying 1(n,π*)state

Fluorescence of sterically hindered azo compounds which correlates with photostability in respect to trans-cis isomerisation is reported. Diabatic processes are important for the radiationless deactivation of excited azo compounds in addition to those involving the coupling of the low-lying electronic states.     

A DFT study on photoinduced surface catalytic coupling reactions on nanostructured silver: selective formation of azobenzene derivatives from para-substituted nitrobenzene and aniline

We propose that aromatic nitro and amine compounds undergo photochemical reductive and oxidative coupling, respectively, to specifically produce azobenzene derivatives which exhibit characteristic Raman signals related to the azo group. A photoinduced charge transfer model is presented to explain the transformations observed in para-substituted ArNO(2) and ArNH(2) on nanostructured silver due to the surface plasmon resonance effect. Theoretical calculations show that the initial reaction takes place through excitation of an electron from the filled level of silver to the lowest unoccupied molecular orbital (LUMO) of an adsorbed ArNO(2) molecule, and from the highest occupied molecular orbital (HOMO) of an adsorbed ArNH(2) molecule to the unoccupied level of silver, during irradiation with visible light. The para-substituted ArNO(2)(-)˙ and ArNH(2)(+)˙ surface species react further to produce the azobenzene derivatives. Our results may provide a new strategy for the syntheses of aromatic azo dyes from aromatic nitro and amine compounds based on the use of nanostructured silver as a catalyst.     

DNQ–novolac photoresists revisited: 1H and 13C NMR evidence for a novel photoreaction mechanism

Photoactive compounds, such as diazonaphthoquinone (DNQ) esters, blended with novolac resins, solvents and certain additives, serve as photoresists. These are used for printing of electronic circuits at the micron or sub‐micron level. Patterns are generated based on changes in the physical and chemical properties of the exposed and unexposed photoresist surfaces (printed circuit boards). The huge polarity change between the exposed and unexposed photoresists is exploited in the technique of microlithography. It is believed that the large polarity difference is due to acid formation in the exposed photoresist by a photochemical reaction of DNQ on exposure to light. However, it has also been suggested that in the unexposed part of a photoresist, the novolac resin undergoes an azo coupling reaction with DNQ, leading to an increase in the molecular weight of the resin, rendering it more insoluble in base. The protons in the para positions of the m‐cresol units incorporated in the novolac resin are believed to take part in this azo coupling reaction with DNQ. In this paper, we propose a novel mechanism of action of positive photoresists in the unexposed part of photoresists for dissolution inhibition using molecular modelling, ¹H NMR, ¹³C NMR and DEPT‐135 NMR spectroscopic techniques. Our results enable us to propose that the diazo group of DNQ attacks the methylene bridges rather than the aromatic moiety of the resin. This mechanism explains the pattern formation observed using even p‐cresol‐based resins, where no free para positions are present in the aromatic ring. Copyright © 2003 John Wiley & Sons, Ltd.     

Synthesis,characterization, and dyeing performance of some azo thienopyridine and thienopyrimidine dyes based on wool and nylon

A string of novel heterocyclic mono azo dyes were synthesized and their utilization in dyeing different fabrics as wool and nylon were discussed. Thienopyridine azo dyes 4 and 6 were prepared by reaction of chloro acetamidederivative 2 with diamino compounds to yield 3 and 5 , followed by reaction with NaNO₂/HCl and coupling with nucleophilic reagent. One-pot reaction of chloro acetamide 2 with ammonium thiocyanat in solvent ethanol gave the unexpected thienopyrimidine derivative 7 , which contain two active sites, the former is primary amine that was able to form diazonium salt that coupled with N,N-dimethylaniline, resorcinol, and/or self-coupling to afford the azo dyes 8-10 , and the latter is active methylene group that underwent coupling with different diazonium salts to give the azo thienopyrimidine derivative dye 11-15 . The dyeing performance of these azo dyes had been investigated in terms of their dyeing behavior and fastness properties on different fabrics. Results showed that the color strength (K/S) values, as well as, washing, rubbing, and resistance to acid, alkali and light showed high efficiency of these heterocyclic mono azo dyes to dye wool rather than nylon fibers.     

Electrochemical methods for monitoring of environmental carcinogens

The use of modern electroanalytical techniques, namely differential pulse polarography, differential pulse voltammetry on hanging mercury drop electrode or carbon paste electrode, adsorptive stripping voltammetry and high performance liquid chromatography with electrochemical detection for the determination of trace amounts of carcinogenic N-nitroso compounds, azo compounds, heterocyclic compounds, nitrated polycyclic aromatic hydrocarbons and aromatic and heterocyclic amines is discussed. Scope and limitations of these methods are described and some practical applications based on their combination with liquid-liquid or solid phase extraction are given.     

Azo‐Coupling Reactions Used in Analytical Chemistry: The Role of Reactants,Intermediates, and Aqueous Medium

A quantum‐chemical study of the analytically important azo‐coupling reactions of naphthalen‐1‐amine ( 1 ) with naphthalene‐1‐diazonium ( 2 ) and 4‐sulphobenzenediazonium ( 8 ) cations has been carried out. The reactions have been found to be frontier‐controlled, and their regioselectivity is unequivocally determined by the thermodynamics of the intermediate σ‐complexes, as well as by the aqueous medium. The latter defines high positional selectivity, providing the decision between two possible reaction routes predicted on the basis of quantum‐chemical computations for separate molecular systems. As a result, azo coupling occurs at the 4‐ rather than at the 2‐position of 1 . Furthermore, the aqueous medium makes the selection of analytical forms – protonated azo‐coupling products with a quinonehydrazone‐type structure.     

Synthesis of dye functionalized xerogels via nucleophilic aromatic substitution of fluoro aromatic compounds with aminosilanes

The one-pot synthesis of inorganic–organic hybrid materials via combination of sol–gel process and nucleophilic aromatic substitution reaction of various fluoro aromatic compounds and 3-aminopropyltrimethoxysilane has been studied. Both, nucleophilic aromatic substitution reaction and sol–gel process can be accomplished in the same reaction vessel due to the sol–gel precursor tetraethoxysilane acting as solvent during the first reaction step. Hydrogen fluoride, which forms as a by-product of the substitution reaction, is trapped by both silane species present and subsequently serves as catalyst during the sol–gel process. The obtained materials can be classified as type II xerogels, because of the covalent linkage between organic chromophor and inorganic silicon network. Fluoro aromatic compounds with different reactivities for nucleophilic aromatic substitution reactions containing azo, azomethine, and diphenylamine groups were used in order to (1) demonstrate the synthetic concept and (2) fine-tune the optical properties of the resulting chromophoric xerogels. The final chromophor content within the xerogels was varied by modifying the ratio of organosilicon precursor and tetraethoxysilane. All obtained organic–inorganic hybrid materials were characterized in detail using solid state NMR- and UV/vis spectroscopy. Latter one gave experimental confirmation of the partial hydrolysis of azomethine dyes in the xerogels, while no decomposition of azo or diphenylamine dyes was observed.     

Solution and solid state structure and tautomerism of azo coupled enaminone derivatives of benzoylacetone

The reaction of 4-substituted benzenediazonium tetrafluoroborates with 3-amino-1-phenylbut-2-en-1-one, 4-amino-4-phenylbut-3-en-2-one and their N-aryl derivatives 1a-1g has been used to prepare the respective azo coupling products i.e. compounds 2-5 from enaminone 1a, compounds 6-9 from enaminone 1c, compound 10 from enaminone 1d, compound 11 from enaminone 1e, compounds 12, 13 from enaminone 1f, compounds 14, 15 from enaminone 1b and compound 16 from enaminone 1g. Tautomerism of the azo coupling products prepared has been investigated in CDCl3 solutions by means of 1H, 13C and 15N NMR spectra. Crystal structures of selected products have also been investigated by means of X-ray diffraction.     

Synthesis of Azobenzene Dyes Mediated by CotA Laccase

An eco‐friendly protocol for the synthesis of azobenzene dyes by oxidative coupling of primary aromatic amines is reported. As efficient biocatalytic systems, CotA laccase and CotA laccase/ABTS (2,2′‐azinobis(3‐ethylbenzothiazoline‐6‐sulfonic acid)) enable the oxidation of various substituted anilines, in aqueous medium, ambient atmosphere and under mild reaction conditions of pH and temperature. A series of azobenzene dyes were prepared in good to excellent yields in an one‐pot reaction. A mechanistic proposal for the formation of the azo derivatives is presented. Our strategy offers an alternative approach for the direct synthesis of azobenzene dyes, avoiding the harsh conditions generally required for most of the traditional synthetic methods.     

A convenient and general ruthenium-catalyzed transfer hydrogenation of nitro- and azobenzenes

An easily accessible in situ catalyst composed of [{RuCl(2)(p-cymene)}(2)] and terpyridine has been developed for the selective transfer hydrogenation of aromatic nitro and azo compounds. The procedure is general and the selectivity of the catalyst has been demonstrated by applying a series of structurally diverse nitro and azo compounds (see scheme).     

系列烯基化芳香杂环化合物的合成及结构表征

报道了一个简单、 高选择性合成烯基化芳香杂环化合物的反应体系. 在钯的催化作用下, 以乙酸/乙酸酐或四氢呋喃为溶剂, 芳香杂环化合物与烯基化试剂进行交叉脱氢偶联, 合成了系列具有潜在光学活性的烯基化芳香杂环化合物, 确定了最佳反应条件. 采用紫外光谱、 核磁共振氢谱和X射线单晶衍射对目标化合物进行了表征, 并对反应机理进行了探讨.     

Natural and synthetic polymers as reagents. I. Diazonium salt derivatives of polycarboxylic resins (insoluble diazonium salt chromogens)

A method is described for the preparation of insoluble polymeric diazonium-salt chromogens which have a precise composition and well-defined specific reactivity and which are capable of undergoing coupling reactions to produce highly colored azo derivatives. The technique involves reaction of the acid chloride of an acrylic or methacrylic acid polymer crosslinked with divinylbenzene with an aromatic diamine, followed by diazotization of the free amino groups of the resultant aminoarylamido resin to give an insoluble diazonium salt. The aminoarylamido derivatives, the corresponding diazonium salts, and colors of the azo derivatives obtained in coupling reactions are tabulated.     

Heterogeneous cobalt carbonyl-nitroarene reactions: A significant difference from the homogeneous process

Nitroarenes are converted to aromatic amines using dicobalt octacarbonyl on alumina. Product yields are dependent on the temperature at which the oxide is dried, as well as on the nature of the support. These results contrast with the homogeneous reaction which affords azo compounds.