Preparation and characterization of novel macroporous cellulose beads regenerated from ionic liquid for fast chromatography

Macroporous cellulose beads (MCB) used as anion exchangers were successfully prepared from cellulose solution in ionic liquid by double emulsification followed by cross-linking and modification with diethylaminoethyl. The pore structure and properties of the MCB were investigated and the results were compared with homogeneous cellulose beads (HCB). The MCB in size of about 71 μm is characterized by two sets of pores, i.e., diffusion pores (10–20 nm) and macropores (800–2000 nm), determined by mercury porosimeter. In addition, the bed permeability and effective porosity for BSA of MCB-packed column are 58% and 25% higher than those of HCB-packed column, respectively. The adsorption properties of MCB were evaluated, and compared with HCB and commercial absorbent (Sepharose 6 Fast Flow, CSFF). It is found that the pore diffusivity of BSA in MCB is over 7.9 times higher than HCB, and 6.7 times higher than CSFF, respectively. While the equilibrium adsorption capacity (q_m) of BSA on MCB is obviously lower than that on HCB and CSFF, the dynamic binding capacity (DBC) on MCB at 10% breakthrough reaches 47.7 mg/mL, higher than HCB (40.3 mg/mL) and CSFF (46.2 mg/mL) at flow rate of 360 cm/h. In addition, the MCB-packed column showed better column efficiency over the HCB packed one. Therefore, we demonstrated that the MCB possessed more advantages than other ones, like HCB and CSFF, and was expected as an ideal material for fast chromatography.     

Chitosan macroporous asymmetric membranes—Preparation,characterization and transport of drugs

Chitosan macroporous membranes with asymmetric morphology were obtained by using an inorganic porogen agent (SiO₂). Chitosan/silica ratios used were 1:1, 1:3, and 1:5 w/w. A methodology to obtain asymmetric membranes with control of porosity and average pore size was proposed. The porous membranes were obtained taking advantage of the opposite solubility characteristics of chitosan and silica (4–20 μm). The membranes were characterized by SEM and water sorption capacity. The porosity was calculated by the relationship between dense and macroporous membranes. The SEM images of both surfaces and cross-section of the membranes confirmed their asymmetric morphology. Using a double-cell method, the permeability coefficients of two model drugs (sodium sulfamerazine and sulfametoxipyridazine) were determined. The effects of porous layer, drug type, concentration and temperature were evaluated. The results revealed that the increase in porosity results in significant differences in permeability and that the effects of drug concentration and bath temperature become less pronounced as porosity increases. The mass transport was analyzed in terms of pore-flow mechanism and the solution-diffusion mechanism. The results showed that the methodology was very efficient to yield asymmetric membranes with good mechanical resistance, control of porous size and dense layer thickness and that these membranes can potentially be used to the transport of drugs.     

Preparation and characterization of macroporous monoliths imprinted with erythromycin

The synthesis of macroporous molecularly imprinted monoliths was performed using the monomers system 2‐hydroxyethyl methacrylate‐ethylene glycol dimethacrylate and erythromycin as a template. The copolymerization was carried out in situ inside 50 mm × 4.6 mm i.d. stainless‐steel tubing. The morphology of the monoliths was examined with scanning electron microscopy. The porous characteristics were determined both from the data of hydrodynamic permeability of monoliths and by means of mercury intrusion porosimetry. The retention parameters of target substance (erythromycin), values of calculated imprinting factors and apparent dynamic dissociation constants were obtained for monoliths prepared with the application of different amount of template (4, 8 and 12 mol%). The separations of the mixtures azithromycin/erythromycin and ciprofloxacin/erythromycin were demonstrated. Additionally, the possibility of erythromycin quantification in human blood plasma was shown.     

Preparation of macroporous monoliths based on epoxy-bearing hydrophilic terpolymers and applied for affinity separations

This work reports the synthesis and characterization of poly(N-acryloyl-tris(hydroxymethyl)aminomethane-co-glycidyl methacrylate-co-N,N′-methylenebisacrylamide) [poly(NAT-GMA-BIS)] discs using different porogenic solvents. The macroporous polymer obtained with PEG 6000 as co-porogen showed the best porous properties of the series. End-point immobilization of heparin (Hep, as ligand) was then carried out on the products through reductive amination. Thus, the products were reacted with ethylenediamine (EDA) and hexamethylenediamine (HMDA) in order to introduce amine groups and to analyze the length of the spacer on the immobilization of heparin. Then, the highest value of amine groups [1.280 and 0.919 mmol amine/g dry support for poly(NAT-GMA-BIS)-EDA and poly(NAT-GMA-BIS)-HMDA, respectively] was obtained at 40 °C after 48 h of reaction. Finally, the amount of ligand coupled to discs was not influenced by the two length spacers assayed. The amount of Hep coupled on discs [591.50 and 489.90 μg Hep/g dry polymer for poly(NAT-GMA-BIS)-EDA-Hep and poly(NAT-GMA-BIS)-HMDA-Hep, respectively] was similar to that obtained using macroporous polymer beads reported by other authors. The supports yielded were used to assay the retention of antithrombin III (AT-III). The retention was greater for the EDA-containing product with a larger amount of heparin. These novel heparin-containing macroporous poly(NAT-GMA-BIS) discs could be used as potential affinity chromatography supports.     

均分散球形氧化铕超细微粒的制备和表征

采用尿素分解法制备了均分散球形Eu(OH)CO~3·H~2O超细沉淀粒子,进一步在空气中750℃下焙烧4h,得到了均分散球形氧化铕超细微粒。考察了各种反应条件的影响,获得了最佳的制备条件。用XRD,IR,TEM,TG以及比表面测定等手段对样品进行了表征。     

Preparation and characterization of submicron hybrid magnetic latex particles

Micrometer magnetic hybrid particles are of great interest in biomedical field, and various morphologies have been prepared via encapsulation processes. Regarding submicron, only few processes have been investigated and the most recent one leading to highly magnetic submicron magnetic hybrid particles is based on oil in water magnetic emulsion (MES) transformation. The encapsulation of magnetic iron oxide nanoparticles forming oil in water MES was investigated using different styrene/cross‐linker divinylbenzene volume ratio in the presence of potassium persulfate initiator. The encapsulation performed in this work is basically conducted by using well‐defined oil in water MES as a seed in radical emulsion polymerization. The chemical composition, morphology, iron oxide content, magnetic properties, electrokinetic properties, particle size, and size distribution of the prepared magnetic hybrid particles were examined using various techniques. The desired perfect magnetic core and polymer shell morphology were successfully obtained, and the final magnetic hybrid particles are superparamagnetic in nature and exhibit high iron oxide content (64 wt %). Copyright © 2015 John Wiley & Sons, Ltd.     

Preparation and characterization of magnetic polymeric composite particles by miniemulsion polymerization

A water‐based magnetite ferrofluid, with an average size of about 10 nm, was prepared in a first step by the chemical coprecipitation of ferrous and ferric salts. Oil‐based styrene (St) magnetite ferrofluid was obtained by the acidification of the water‐based magnetite ferrofluid and the dispersion of the acidified magnetite in St. Magnetic polymeric composite particles (MPCPs) were prepared by miniemulsion polymerization in the presence of the oil‐based St magnetite ferrofluid with hexadecane as a hydrophobe, 2,2′‐azobisisobutyronitrile as an initiator, and sodium dodecyl sulfate as an emulsifier. Methacrylic acid was used as a comonomer, and hydroxyethyl cellulose and polyvinylpyrrolidone were used as aid stabilizers subsequently. With the aim of improving the encapsulation degree of magnetite, avoiding pure polymer particles and exposed magnetite particles, and obtaining the narrowest particle size distributions, the encapsulation conditions of magnetite were investigated in detail. The results show that miniemulsion polymerization is an effective method for encapsulating magnetite into a hydrophobic polymer successfully. Exposed magnetite particles and pure polymer particles can be avoided completely by the selection of the appropriate preparation conditions. All the resulting MPCPs exhibited superparamagnetism and possessed some magnetic response. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4187–4203, 2006     

Preparation and characterization of micron-sized polystyrene/polysiloxane core/shell particles

A procedure has been developed to coat micron-sized polystyrene (PS) spheres with a smooth layer of polysiloxane by a sol–gel process of methyl trimethoxylsilane (MTMS) without using silane coupling agents. The thickness of the shells can be easily varied with different polystyrene seeds and methyl trimethoxysilane feed ratio. When we used PS particles with diameters of 2.09 μm prepared by conventional dispersion polymerization as seeds, the thickness of the polysiloxane shells can be varied from 0.11 to 0.21 μm. The particle size, size distribution, thermal decomposition, and solvent resistance were investigated by scanning electron microscope (SEM), transmission electron microscope (TEM), size analyzer, and TG, respectively.     

Synthesis and characterization of three-dimensionally ordered macroporous ternary oxide

A three-dimensionally ordered macroporous (3DOM) ternary oxide, CsAlTiO₄, with a framework related to ‘stuffed-tridymite’ has been synthesized at temperatures 500-700 °C using a sol-gel precursor solution and templating with polystyrene spheres. The 3DOM material displayed pore diameters of 0.5-0.8 μm with the walls composed of anhedral and acicular CsAlTiO₄ crystals whose dimensions ranged from 16 to 25 nm. Microanalysis confirmed near-stoichiometric proportions (1:1:1) of Cs, Al and Ti. The effect of sintering temperature on the macroporous structure and on the CsAlTiO₄ walls was studied. As the sintering temperature increased from 500 to 600 °C the unit cell parameters varied through dilation (a and b) and contraction (c-axis), followed by a reversal of these trends from 700 to 900 °C. This behaviour in non-equilibrated CsAlTiO₄ can be attributed to distortion of the (Al, Ti)O₄ tetrahedral framework, however at the highest temperature the cell constants stabilized close to those reported for single crystal CsAlTiO₄. X-ray amorphous content was significant in all materials varying from 73 wt% after 500^oC and reducing to 44 wt% at 900 °C.     

Preparation and characterization of cationic polystyrene latex particles of different aminated surface charges

Functionalized polystyrene latex particles were obtained either by seed particle functionalization or by the shot-growth procedure using 2,2′-azobis (2-amidino-propane) dihydrochloride as an initiator and vinylbenzylamine hydrochloride as a cationic monomer. The capabilities of both processes to produce functionalized particles in terms of functionalization yields coming from surface amino group titrations were compared. Different titration methods were performed and a new technique was introduced using fluorescamine.     

Preparation and characterization of conducting polyaniline layered magnetic nano composite polymer particles

Considering the application potentials of organic materials possessing both conducting and ferromagnetic functions in various electronic devices, an attempt was made to prepare conducting polyaniline (PANI) layered magnetic nano composite polymer particles. Two routes were used to modify magnetic Fe₃O₄ core particles. In one route, seeded emulsion polymerization of methyl methacrylate (MMA) was carried out in presence of nano‐sized Fe₃O₄ core particles. In another route, cross‐linker ethyleneglycol dimethacrylate (EGDM) was used in addition to MMA. The modified composite particles were named as Fe₃O₄/PMMA and Fe₃O₄/P(MMA‐EGDM), respectively. Finally, seeded chemical oxidative polymerization of aniline was carried out in the presence of Fe₃O₄/PMMA and Fe₃O₄/P(MMA‐EGDM) composite seed particles to obtain Fe₃O₄/PMMA/PANI and Fe₃O₄/P(MMA‐EGDM)/PANI composite polymer particles. The modification of Fe₃O₄ core particles was confirmed by electron micrographs, FTIR, UV–visible spectra, X‐ray photoelectron spectra, X‐ray diffraction pattern and thermogravimetric analyses. A comparative study showed that crosslinking of intermediate shell improved the magnetic susceptibility and electrical conductivity of PANI layered magnetic nano composite particles. Copyright © 2013 John Wiley & Sons, Ltd.     

Preparation and characterization of poly(methyl methacrylate)/titanium oxide composite particles

Before polymerization, the introduction of double bonds onto the surface of the TiO₂ particles was achieved by the treatment of the TiO₂ particles with the silane-coupling agent. Via in-situ emulsion polymerization, the poly(methyl methacrylate) (PMMA)/titanium oxide (TiO₂) composite particles were prepared by graft polymerization of MMA from the surface of the modified TiO₂ particles. The structure of the obtained PMMA/TiO₂ composite particles was characterized using fourier transform infrared spectra (FT-IR), thermo-gravimetric analysis (TGA), differential scanning calorimetry (DSC) and size excluding chromatography (SEC). The morphology of the obtained PMMA/TiO₂ composite particles was observed by transmission electron microscope (TEM). The results of FT-IR and TGA measurements show that PMMA is successfully grafted from the surface of the TiO₂ particles and that the percentage of grafting and the grafting efficiency can reach 208.3% and 96.6%, respectively. At the same time, the TGA and DSC measurements indicate an enhancement of thermal stability. TEM images demonstrate a better dispersion of the TiO₂ particles in the composite latex. In addition, UV-visible absorption measurements show that the PMMA/TiO₂ composite particles can absorb over 95% UV light at 210–400 nm wavelength.     

Preparation and application of streptavidin magnetic particles

Two kinds of streptavidin magnetic particles,namely streptavidin GoldMag particles and streptavidin amino terminal particles were prepared by the methods of physical adsorption and covalent interaction respectively.The streptavidin coated on magnetic particle surface,crucial to many applications,was greatly influenced by the choice of the different buffer.Compared with DynalbeadsM-270 streptavidin, the binding capacity for biotin of different streptavidin magnetic particles was determined by enzyme inhibition method,and the coupling capacity and activity of biotinylated oligonucleotide on their sur- face were also analyzed.The results indicated that the streptavidin GoldMag particle prepared by physical adsorption was stable in STE(NaCl-Tris-EDTA)buffer that was frequently used in nucleic acid hybridization and detection.The streptavidin amino terminal particles prepared by covalent interaction could be used both in STE buffer and PBS(phosphate buffered saline)buffer.The biotin binding ca- pacity for 1 mg of streptavidin GoldMag particles and streptavidin amino terminal particles was 4950 and 5115 pmol respectively.The capacity of biotinylated oligonucleotide(24 bp)coupled on 1 mg of GoldMag and amino terminal magnetic particles was 2839 and 2978 pmol separately.These data were about 6-7 times higher than those of DynabeadsM-270 streptavidin.The hybridization results with FITC-labeled complementary probe on magnetic particle surface demonstrated that the oligonucleotide coupled on streptavidin magnetic particles had high biological activity.     

Preparation and characterization of core-shell polystyrene/polychloromethylstyrene and hollow polychloromethylstyrene micrometer-sized particles of narrow-size distribution

Polystyrene core microspheres of narrow-size distribution were prepared by dispersion polymerization of styrene in a mixture of ethanol and 2-methoxy ethanol. Polystyrene/polychloromethylstyrene and polystyrene/poly(chloromethylstyrene-divinylbenzene) core-shell microspheres of narrow-size distribution were prepared by seeded emulsion polymerization of chloromethylstyrene or chloromethylstyrene and divinylbenzene in the presence of the polystyrene core microspheres at 71 °C. Core-shell particles with different properties (size, surface morphology, and composition) have been prepared by changing various parameters belonging to the emulsion polymerization process, e.g., volume of the chloromethylstyrene and the volume ratio of chloromethylstyrene to divinylbenzene. Dissolution of the polystyrene core of the polystyrene/poly(chloromethylstyrene-divinylbenzene) core-shell particles resulted in the formation of crosslinked hollow polychloromethylstyrene microspheres, broken crosslinked polychloromethylstyrene shells, or particles containing voids, depending on the composition of the polystyrene/poly(chloromethylstyrene-divinylbenzene) particles.     

Synthesis and characterization of monodisperse porous polymer particles

Monodisperse porous polymer particles in the size range of 10 μm in diameter were prepared via seeded emulsion polymerization. Linear polymer (polystyrene seed) or a mixture of linear polymer and solvent or nonsolvent were used as inert diluents. The pore diameters of these porous polymer particles were on the order of 1000 Å with pore volumes up to 0.9 mL/g and specific surface areas up to 200 m²/g. The physical features of the porous polymer particles depended on the diluent type and the crosslinker content, as well as the molecular weight of polymer seed particles. By varying the molecular weight of the linear polymer, monodisperse porous polymer particles with different pore size distribution could be synthesized. Polymer seed with a low degree of crosslinking instead of linear polymer could also be used to prepare monodisperse porous polymer particles with smaller pore volume and pore size.     

Preparation of ultrafine high density gamma ferric oxide using aerosol OT microemulsions and its characterization

Ultrafine gamma ferric oxide has been prepared by controlled heating of ferrous oxalate at a temperature range of 225° to 300°C in moist air. Ferrous oxalate was prepared both in aqueous as well as in Aerosol OT microemulsion systems. It has been observed that the product is always a mixture of alpha and gamma ferric oxides which were characterized by TGA, DTA and XRD studies. Microemulsion mediated ferrous oxalate was found to yield more gamma ferric oxide than that from ferrous oxalate prepared in aqueous solution. However, the yield of gamma ferric oxide prepared through microemulsion mediated system depends on the size of the microemulsion droplets in which precursors have been participated as well as calcination temperature.     

Synthesis and characterization of monodisperse magnetic composite particles for magnetorheological fluid materials

Monodisperse magnetic composite particles (MCP) were prepared and characterized for a study of magnetic field-responsive fluids. Magnetic composite particles used are iron oxide-coated polymer composite particles, which were synthesized through in situ coating of iron oxide onto pre-existing polymer particles by the reduction of ferrous fluids. For a uniform and bulk coating of iron oxide, the porous structure was introduced into the substrate polymer particles through a two-step seeded polymerization method. Moreover, surface cyano-functionality was born from acrylonitrile unit of substrate polymer and it played an important role in obtaining successful uniform coating. The structure of the composite particle was analyzed by using a thermo gravimetric analysis (TGA) and a X-ray diffraction (XRD) analysis. The magnetization property of the particle was also observed. Then, the rheological properties of monodisperse magnetorheological (MR) suspensions of magnetic composite particles were examined under a magnetic field using a parallel-plate type commercial rheometer. From the rheological measurements, it was found that MR properties of the magnetic composite suspensions are dependent on the iron oxide content and the fluid composition.     

Dielectrophoretic investigation of plant virus particles: Cow Pea Mosaic Virus and Tobacco Mosaic Virus

This paper reports experimental results on the dielectrophoretic (DEP) behaviour on two nonenveloped plant viruses of different geometrical shapes, namely Cow Pea Mosaic Virus (CPMV) and Tobacco Mosaic Virus (TMV). The DEP properties of carboxy-modified latex beads of the same size are also reported. The DEP properties of single particles were obtained from measurement of the frequency at which the DEP force on a particle goes to zero (the crossover frequency). The DEP behaviour of particle ensembles was also measured using image processing. The dielectric properties of the particles were evaluated from the DEP data. The surface conductance was found to be 0.3 nS for CPMV, 0.38 nS for TMV, and 0.52 nS for 27 nm diameter carboxy-latex beads. Data analysis has shown that the optimal condition for separation of TMV and CPMV is a low-conductivity suspending medium - below 1 mS/m.     

Preparation and characterization of polystyrene-based monolith with ordered macroporous structure

In this paper,polystyrene-based monoliths with highly ordered macroporous structure were synthesized by using SiO₂ colloidal crystal as template.SEM observation shows that the macropores are highly ordered and are interconnected by small windows.The BET surface area of PS monolith is about 36.17 m²/g.The polymer monoliths can resist 5 MPa pressure,showing high mechanical and compressive strength.     

Preparation and functionalization of reactive monodisperse macroporous poly(chloromethylstyrene-co-styrene-co-divinylbenzene) beads by a staged templated suspension polymerization

Reactive monodisperse porous poly(chloromethylstyrene-co-styrene-co-divinylbenzene) beads have been prepared by a staged templated suspension polymerization method with different concentrations of linear polystyrene porogen and chloromethylstyrene in the polymerization mixture. The presence of a small amount of linear polystyrene in the polymerization mixture leads to a dramatic increase in both the pore size and the pore volume of the resulting beads. In contrast, addition of chloromethylstyrene leads to lower surface areas and smoother surfaces due to the reduced compatibility between the polystyrene porogen and the newly formed crosslinked chains. The modification of chloromethylstyrene beads by Gabriel synthesis to obtain aminated beads has also been studied. The final number of primary amino groups is related to the starting concentration of functional benzyl chloride moieties rather than to the porous properties. Both π-basic and π-acidic type chiral selectors, (R)-1-(1-naphthyl)-ethylamine and (R)-N-(3,5-dinitrobenzoyl)phenylglycine, respectively, have been attached to the amino functionalized beads, and the resulting chiral beads have been used in the model HPLC separations of enantiomers. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 2631–2643 1997