Chemical nature of adhesion: Plasma modified styrene-butadiene elastomer and polyurethane adhesive joints

A study of the mechanism of gluing between plasma-modified styrene-butadiene elastomer (SBS) surfaces and polyurethane (PU) adhesives is presented in this paper. The plasma treatment was carried out employing low-pressure O₂ plasma generated by an RF discharge (13.56 MHz). FTIR-ATR spectroscopy and peel tests were utilized to characterize the SBS surfaces before and after the plasma treatment. It was found that hydroxyl groups are mainly created on the SBS surface by the plasma treatment and their concentration reveals very good linear correlation with the peel strength of the SBS-PU joints. The grafting of phenyl isocyanate (analog of the PU curing agent) into the plasma-treated SBS surface was also investigated. The process was performed at 353 K, that is at temperature in which the adhesive-bonded joints were made. It was shown that all hydroxyl groups on the SBS surface react with isocyanate groups forming carbamate bonds. The results obtained in this work strongly confirm the conception of the adhesion by chemical bonding between SBS and PU.     

Aspects of the thermal and photostabilisation of high styrene-butadiene copolymer (SBC)

The thermal and photo-oxidative stabilisation of high styrene-butadiene copolymer (SBC) with high styrene content (K-Resin) has been studied using a variety of analytical and spectroscopic methods including yellowness, luminescence and FT-IR spectroscopy coupled with hydroperoxide analysis in order to understand the nature and effectiveness of the processes involved. The next stage of the program was to evaluate the effects of various chemical/solvent treatments on the role of metal ions/residual catalysts and hydroperoxides in the thermal and photostabilisation of SBS as well as combinations of phenolic antioxidants and phosphites/phosphonites. Other additives, such as HALS and a metal deactivator, were also added to the combinations of phenolic and phosphite antioxidants in order to study their behaviour and efficiency. The chemical treatments appeared to stabilise SBS against thermal oxidation to a greater or lesser extent. Phosphoric acid treatment via reflux and zinc dithiocarbamate treatments showed better performances than the rest of the treatments, the latter was particularly effective at inhibiting the discolouration. During photo-oxidation, on the other hand, chemical treatments involving phosphoric acid and pre-thermal effects showed the importance of catalyst effects. The addition of phenolic antioxidants, phosphites/phosphonites, metal deactivator and HALS was found to stabilise the SBS against thermal and photo-oxidation. In thermal oxidation, the combination of Irganox^® 1010/Irgafos^® 168 was found to effectively stabilise the polymer when the finalisation of the polymerisation was with adipic acid. When the same antioxidants were used, but with polymer finalised with BHT, strong yellowing was observed and a higher amount of hydroperoxides and oxidation products. Increasing the amount of antioxidants did not increase the stabilisation efficiency. The stabilisation efficiency of Irganox^® 1010 combined with Alkanox^® P-24 was found to be more effective than when it was combined with Irgafos^® 168. The formulations containing Irgafos^® 168/Irganox^® 1010 and Irgafos^® 168/Irganos^® 1330 were more effective in colour protection and retarding the formation of oxidation products than the combinations of Irgafos^® 168/Irganox^® 3114 and Irgafos^® 168/Lowinox^® 1790. The effect of the addition of HALS, such as Tinuvin^® 770, Tinuvin^® 622 and Chimassorb^® 944, and a metal deactivator, such as Irganox^® MD 1024, to the combination of Irgafos^® 168/Irganox^® 1010 was found to be antagonistic. In photo-oxidation, a combination of Irganox^® 1010/Irgafos^® 168 protected the polymer efficiently, when the polymerisation of the polymer was finalised with adipic acid. When the polymerisation was finalised with BHT, a higher amount of hydroperoxides and oxidation products was found. An increase in the amount of antioxidants did not enhance the stability of the polymer. The addition of Alkanox^® P-24 exhibited an opposite effect to that seen in thermal oxidation, as the stabilisation efficiency was less effective than with Irgafos^® 168. The formulation containing Irgafos^® 168/Irganox^® 1010 was found to be the most efficient compared with the other phenolic antioxidants. The addition of Tinuvin^® 770 to the formulation Irgafos^® 168/Irganox^® 1010 was found to have a synergistic effect. The addition of polymeric HALS or Irganox^® MD 1024, a metal deactivator, had an antagonistic effect on the stabilisation of the polymer. Disruption of the excimer sites in the styrenic phase also correlated with stabilisation effects.     

New fluorinated oxazoline block copolymer lowers the adhesion of platelets on polyurethane surfaces

We have prepared an amphiphilic oxazoline block copolymer of hydrophilic poly(2-methyl-2-oxazoline) and hydrophobic poly[2-(2-perfluorooctyl)ethyl-2-oxazoline] chains. By controlling the length and composition of polymer chains, we found that this fluorinated block copolymer can be readily dissolved in water. Furthermore, we can achieve a stable surface coating of the fluorinated block copolymer by dissolving the copolymer in water, then coating the aqueous copolymer solution onto surfaces of nonwater-soluble polymers. This is a simple and useful method of modifying the surface character of polymer substrates. We have found that the polyether urethane (PEU) coated by block copolymer has a different surface chemistry and biological reactivity than the uncoated PEU. From XPS analysis, we found the fluorinated copolymer was coated on PEU (atomic % of F: 31.3 on coated PEU, 0.3 on uncoated). The two surfaces have different affinities for biological molecules. Specifically, the fibrinogen adsorption on the fluorinated copolymer-coated PEU was 62 ± 39 ng/cm², compared to a value of 156 ± 99 ng/cm² for uncoated PEU. In an ex vivo evaluation of platelet adhesion, the surface of coated PEU attached a few white cells while uncoated PEU was covered with activated platelets. © 1994 John Wiley & Sons, Inc.     

Chlorination and characterization of natural rubber and its adhesion to nitrile rubber

Chlorinated natural rubber (CNR) vulcanized sheets were prepared by immersing the NR sheets in sodium hypochlorite solution for various chlorination times ranging from 0 to 30 min. The degree of chlorination as indicated by X-ray Absorption Near-Edge Spectroscopy (XANES) implied that the chlorine content increases with the chlorination time from 0 to 10 min then levels off. Atomic Force Microscopy (AFM) showed an evolution of the surface roughness and stiffness. These two properties increased gradually with chlorination time. The bond strength between CNR and nitrile rubber (NBR) also increased gradually. The data showed cohesive failure beginning at 1 min and extending throughout the 30 min of the study. The maximum peel strength was found at 1 min of chlorination time and decreased afterwards. The decrease in peel strength was caused by the increase in surface stiffness of NR that acted as weak boundary layer. The surface stiffness governed the peel strength between NR and NBR.     

Getting to the bottom morphology of block copolymer thin films

We demonstrate a general approach for attaining the bottom morphology of block copolymer(BCP) thin films. In our former measurements on PS-b-PMMA films, surface morphology maps of the BCP films revealed distinct ordering regimes where the cylinders orient predominantly perpendicular or parallel to the interface and an ‘intermediate' regime where these morphologies coexist. However, this earlier work did not explore the bottom morphology of BCP thin films. In this study, we investigated the block copolymer morphology near the solid substrate in the cast block copolymer film having a perpendicular cylinder morphology on the surface.     

Mechanism of adhesion of polyurethane/polymethacrylate simultaneous interpenetrating networks adhesives to polymer substrates

Polyether-based polyurethane/poly (methyl methacrylate-co-ethyleneglycol dimethacrylate) interpenetrating polymer networks [PU/P (MMA–co–EGDMA)-IPNs] were synthesized and used as adhesives to adhere vulcanized natural rubber (NR) and soft polyvinyl chloride (PVC). The structure and morphology of the IPN adhesives in bulk and near the adhesive/substrate interfaces were investigated. A new mechanism of adhesion called conjugate interpenetration of networks across interfaces, which is suitable for IPN adhesives and polymer substrates, was put forward. According to this mechanism, while forming simultaneous interpenetrating networks in the adhesive, the monomers in the IPN adhesive can permeate polymer substrates and polymerize in situ to form gradient IPNs, thereby producing conjugate three-component IPNs near the adhesive/substrate interfaces. It is the conjugate interpenetration of the networks across the interfaces that strengthens interfacial combination remarkably and results in high bond strength of IPN adhesives. © 1994 John Wiley & Sons, Inc.     

Co-delivery of doxorubicin and paclitaxel with linear-dendritic block copolymer for enhanced anti-cancer efficacy

A series of well-defined amphiphilic linear-dendritic block copolymers (telodendrimers, MPEG-b-PAMAM-cholesterol) with 1,2,4 or 8 cholesteryl groups (named as P1, P2, P4, P8, respectively) were synthesized. Their chemical structures were characterized with ¹H NMR and mass spectrum (MALDI-TOF MS). The telodendrimers could self-assemble into micelles in aqueous solution, and encapsulate chemotherapeutic drug doxorubicin (DOX) and paclitaxel (PTX) for combination therapy. All the telodendrimers could encapsulate DOX with similar capability. However, their drug-loading capability of PTX is increased with the increasing number of cholesteryl groups. P8 exhibited much higher PTX loading efficiency than its counterparts. Thus, P8 was selected for further application of drug delivery in the paper. The drug-loading micellar nanoparticles (NPs) of P8 were spherical in shape and their diameters were less than 150 nm which were determined by dynamic light scattering measurements (DLS) and transmission electron microscope (TEM). In vitro drug release experiment demonstrated that P8 exhibited a controlled release manner for both DOX and PTX, and the two drugs were released simultaneously. In vitro cytotoxicity experiment further demonstrated that the co-delivery of DOX and PTX in P8 exhibited better anti-cancer efficiency than the delivery systems encapsulated with single drug (DOX or PTX). This indicates a synergistic effect. The co-delivery system showed potential in future anti-cancer treatment.     

Open tubular CEC with novel block copolymer coatings for separation of aromatic amines

A new type of block copolymer, which was synthesized by styrene and maleic anhydride, P(MAn‐alt‐St)₁₁₉‐b‐PSt₅₅₈, was successfully developed as the capillary coatings in open tubular CEC. It is interesting that the covalently bonded coatings are porous and the coatings can play the role of surfactants in the separation of aromatic amines when the buffer solution was composed of 30.0 mM ammonium acetate at pH 7.7 with 20% THF. Thus, successful baseline separation of five kinds of aromatic amines has been achieved. As validated by both artificially prepared solutions of aromatic amines and four real samples of commercially available permanent hair dyes, this proposed method was successfully applicable to the quantitative analysis of p‐phenylenediamine (PPD) and o‐phenylenediamine (OPD) ingredients in these commercial products, with a linear range between 8.3 μM and 6.0 mM, correlation coefficient above 0.990 and recovery between 83.5 and 110.9%. The detection limit obtained from calculations based on signal‐to‐noise ratio (S/N=3) was 4.2 μM for PPD and 6.0 μM for OPD, respectively. Furthermore, the role of the surfactants played by the block copolymer coatings has been primarily explored.     

Dependence of size and morphology on shear flow for PS-based amphiphilic block copolymer micelles in aqueous solution

This contribution focuses on the impact of shear flow on size and nanostructure of PS-based amphiphilic block copolymer (BC) micelles by varying the stirring rate and copolymer composition.The results show that the vesicles formed from diblock copolymer (di-BC) of PS-b-PAA remain with vesicular morphology,although the average size decreases,with the increase of stirring rate.However,the multi-compartment micelles (MCMs) formed from tri-block copolymer (tri-BC) of PS-b-P2VP-b-PEO are quite intricate,in which the copolymer first self-assembles into spheres,then to clusters,to large compound micelles (LCMs),and finally back to spheres,as stirring rate increases from 100 r/min to 2200 r/min.Formation mechanism studies manifest that vesicles form simultaneously as water is added to the di-BC solution,termed as direct-assembly,and remain with vesicular structure in the flowing process.While for the PS-b-P2VP-b-PEO copolymer,spherical micelles at initial stage can further assemble into clusters and LCMs,termed as second-assembly,due to the speeding-up-aggregation of the favorable stirring.As a result,an invert V-relationship between tri-BC micelle dimension and stirring rate is observed in contrast to the non-linear decreasing curve of di-BC vesicles.It is by investigating these various amphiphilic BCs that the understanding of shear dependence of size and morphology of micelles is improved from self-assembly to second-assembly process.     

两亲性嵌段共聚物PGMA-b-PMAPEG的制备及其胶束的布洛芬药物控制释放性能

利用自由基可逆加成-断链链转移(RAFT)活性/可控聚合法成功合成了两亲性嵌段共聚物聚(甲基丙烯酸缩水甘油酯)-b聚(甲基丙烯酸聚乙二醇酯)(PGMA-b-PMAPEG).利用傅立叶变换红外光谱、核磁共振谱仪、凝胶渗透色谱仪及透射电镜等分析了所合成聚合物的结构、胶束粒径及形貌.以布洛芬作为模型药物负载于聚合物胶束内,考...     

Staphylococcus epidermidis adhesion to He, He/O(2) plasma treated PET films and aged materials: contributions of surface free energy and shear rate

Adhesion studies of bacteria (Staphylococcus epidermidis) to plasma modified PET films were conducted in order to determine the role of the surface free energy under static and dynamic conditions. In particular, we investigated the effect of the ageing time on the physicochemical surface properties of helium (He) and 20% of oxygen in helium (He/O₂) plasma treated polyethylene terephthalate (PET) as well as on the bacterial adhesion. Treatment conditions especially known to result in ageing sensitive hydrophilicity (hydrophobic recovery) were intentionally chosen in an effort to obtain the widest possible range of surface energy specimens and also to avoid strong changes in the morphological properties of the surface. Both plasma treatments are shown to significantly reduce bacterial adhesion in comparison to the untreated PET. However, the ageing effect and the subsequent decrease in the surface free energy of the substratum surfaces with time – especially in the case of He treated samples – seem to favor bacterial adhesion and aggregation. The dispersion-polar and the Lifshitz–van der Waals (LW) acid–base (AB) thermodynamic approaches were applied to calculate the Gibbs free energy changes of adhesion (ΔG_adh) of S. epidermidis interacting with the substrates. There was a strong correlation between the thermodynamic predictions and the measured values of bacterial adhesion, when adhesion was performed under static conditions. By decoupling the (ΔG_adh) values into their components, we observed that polar/acid–base interactions dominated the interactions of bacteria with the substrates in aqueous media. However, under flow conditions, the increase in the shear rate restricted the predictability of the thermodynamic models.     

高效液相色谱法测定小鼠血浆和组织中的阿昔洛韦

改良HPLC用于测定小鼠血浆和组织中阿昔洛韦浓度。使用Beckinan Gold系列高效液相色谱仪,ODS柱,流动相为甲醇－水（5：95,V／V）,流速1．0mL/min,检测波长254nm,样品采用12％三氯醋酸去蛋白。血浆和组织中阿昔洛韦浓度在0．05－20mg/L范围内与峰高呈良好线性关系,最低检测浓度分别为0.02.0.05mg/L,天间精密度均优于6％。     

From self-assembled monolayers to chemically patterned brushes: Controlling the orientation of block copolymer domains in films by substrate modification

Block copolymer lithography is emerging as one of the leading technologies for patterning nanoscale dense features. In almost all potential applications of this technology, control over the orientation of cylindrical and lamellar domains is required for pattern transfer from the block copolymer film. This review highlights the state-of-art development of brushes to modify the substrates to control the assembly behaviors of block copolymers in films. Selected important contributions to the development of self-assembled monolayers, polymer brushes and mats, and chemically patterned brushes are discussed.     

Water‐soluble top coats for orientation control of liquid crystal‐containing block copolymer films

An easily removable, water‐soluble top coat of polyvinylpyrrolidone (PVP) is used to control the orientation of microdomains in a liquid crystalline block copolymer (LC BCP, poly(ethylene oxide)‐block‐poly(6‐(4‐methoxy‐azobenzene‐4′‐butyl) hexyl methacrylate)). The corresponding LC homopolymer is also investigated for comparison. Atomic force microscopy is used to determine the orientation of the cylindrical microdomains of the LC BCP. UV–vis spectroscopy and grazing incidence wide‐angle X‐ray scattering are used to determine the orientation of the LC mesogens in the LC homopolymer and the LC BCP films annealed both with and without a top coat. Once the LC BCP morphology is self‐assembled, the PVP top coat layer can be easily removed with water or alcohol. The facile removal of the top coat improves the processability of BCPs in technological applications, and enables direct investigation of the BCP morphology in scientific studies. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 1569–1574     

A novel method to introduce durable hydrophilicity onto hydrophobic polymer surface by plasma treatment

We have examined a novel method to fabricate a durable hydrophilic surface of hydrophobic polymeric materials modified by plasma treatment. The method involves a trapping of maleic anhydride-containing polymer onto poly(ethylene naphthalate) (PEN) by a plasma-induced crosslinking reaction of PEN followed by hydrolysis of maleic anhydride moiety to generate hydrophilic carboxyl groups on the PEN surface. In fact, the PEN film surface thus treated has shown an effective stability of wettability based on the water contact angle measurement.     

Double‐hydrophilic block copolymer for encapsulation and two‐way pH change‐induced release of metalloporphyrins

A double hydrophilic block copolymer composed of poly(acrylic acid) (PAA) and poly(4‐vinyl pyridine) (P4VP) was obtained through hydrolysis of diblock copolymer of poly(tert‐butyl acrylate) (PtBA) and P4VP synthesized using atom transfer radical polymerization. Water‐soluble micelles with PAA core and P4VP corona were observed at low (acidic) pH, while micelles with P4VP core and PAA corona were formed at high (basic) pH. Two metalloporphyrins, zinc tetraphenylporphyrin (ZnTPP) and cobalt tetraphenylporphyrin (CoTPP), were used as model compounds to investigate the encapsulation of hydrophobic molecules by both types of micelles. UV–vis spectroscopic measurements indicate that micelles with P4VP core are able to entrap more ZnTPP and CoTPP as a result of the axial coordination between the transition metals and the pyridine groups. The study found that metalloporphyrins encapsulated by the micelles with PAA core could be released on pH increase, while those entrapped by the micelles with P4VP core could be released on pH decrease. This behavior originates from the two‐way pH change‐induced disruption of PAA‐b‐P4VP micelles. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1734–1744, 2006     

Improving the properties of HDPE based separators for lithium ion batteries by blending block with copolymer PE-b-PEG

To improve the performances of HDPE-based separators, polyether chains were incorporated into HDPE membranes by blending with poly(ethylene-block-ethylene glycol) (PE-b-PEG) via thermally induced phase separation (TIPS) process. By measuring the composition, morphology, crystallinity, ion conductivity, etc, the influence of PE-b-PEG on structures and properties of the blend separator were investigated. It was found that the incorporated PEG chains yielded higher surface energy for HDPE separator and improved affinity to liquid electrolyte. Thus, the stability of liquid electrolyte trapped in separator was increased while the interfacial resistance between separator and electrode was reduced effectively. The ionic conductivity of liquid electrolyte soaked separator could reach 1.28 × 10-3 S.cm-1 at 25℃, and the electrochemical stability window was up to 4.5 V (versus Li + /Li). These results revealed that blending PE-b-PEG into porous HDPE membranes could efficiently improve the performances of PE separators for lithium batteries.     

Microscopic morphology of blends between a new “all-acrylate” radial block copolymer and a rosin ester resin for pressure sensitive adhesives

With the goal of developing new pressure sensitive adhesive systems, the miscibility and the phase morphology of blends between novel symmetric four-arm star “all-acrylate” block copolymers synthesized by atom transfer radical polymerization (ATRP) and a rosin ester resin tackifier was studied with a combined differential scanning calorimetry (DSC) and atomic force microscopy (AFM) approach. Copolymer-resin compositions with increasing resin content in the blend were studied. The DSC results show good miscibility for compositions lower than 60 wt%, with a single glass transition at a temperature between those of the two pure compounds. The AFM results indicate that the initial two-phase morphology typical of the block copolymer matrix is preserved up to 60 wt% of resin. Above that value, a third phase, attributed to aggregates of the pure resin, is observed. Upon ageing, the homogeneous systems (e.g., blends with 40 wt% of resin) undergo a slow migration of the tackifying resin towards the surface of the sample, which can be understood in terms of surface free energy considerations. This eventually leads to the formation of a layer of pure resin at the surface.     

An improved HPLC-ED method for monitoring plasma levels of clozapine and its active metabolites in schizophrenic patients

Summary An HPLC method with electrochemical detection has been developed for the determination of clozapine and its main metabolites, desmethylclozapine and clozapine N-oxide, in human plasma. An accurate pretreatment of the biological samples was implemented by means of solid phase extraction (SPE) on HLB cartridges. This improved pretreatment, together with a new mobile phase, allows for the accurate determination of clozapine N-oxide, which could not be quantitated by a previous method. The method uses only 100 μL of plasma for one complete analysis and shows good recovery values for all three analytes. The eluates from the SPE procedure were chromatographed in a reversed phase C18 column using a mobile phase composed of phosphate buffer, acetonitrile and methanol. Clozapine, desmethylclozapine and clozapine N-oxide were eluted in less than 10 minutes, without any interference from the biological matrix. Linearity was observed over the 2.50–150 ng mL⁻¹ (clozapine and desmethylclozapine) or 1.25–75 ng mL⁻¹ clozapine N-oxide) range for the three analytes, with satisfactory repeatability values. The limit of detection was 0.3 ng mL⁻¹ for clozapine and desmethylclozapine, samples of patients treated with Leponex gave good results. No interference from other common central nervous system drugs was found. This method seems to be a useful tool for pharmacokinetic studies and for clinical monitoring, because of its need for small plasma samples and its high sensitivity and selectivity.