A new triphenylamine-based hyperbranched polyfluorene with oxadiazole units on its side chains

A new triphenylamine-based hyperbranched polymer with electron deficient units of oxadiazole on its side chains was successfully prepared by a modified Suzuki polycondensation with Pd(PPh₃)₄ as a catalyst, K₂CO₃ as a base, and a mixture of THF/toluene (1:1) as the solvent. The electron deficient units of oxadiazole were used to improve the electron injection and transport of the polymer. The results of the cyclic voltammetry (CV) of the polymer indicate that the HOMO and LUMO energy levels match well with the work function of the ITO/PEDOT anode and the metal cathode, respectively. Moreover, the hyperbranched polymer shows blue-emission and the hyperbranched structure effectively suppressed the formation of the aggregates/excimers in the polymer film.     

Synthesis and photovoltaic performances of 2,5-dioctyloxy-1,4-phenylenevinylene and terthiophene copolymers with di(p-tolyl)phenylamine and oxadiazole side groups

Three novel conjugated polymers (P1, P2, and P3), comprised of 2,5-dioctyloxy-1,4-phenylenevinylene and terthiophene derivatives with/without di(p-tolyl)phenylamine (TPAV) and oxadiazole (OXD) side groups, have been synthesized via the Witting-Horner reaction. The effect of TPAV and OXD side groups on the optical, electrochemical and photovoltaic properties has been investigated. It is found that the introduction of TPAV and OXD side groups to the backbone of P2 and P3 exhibits broader and stronger absorption than that of P1 without TPAV and OXD side groups. Photovoltaic cells have been fabricated with the as-synthesized polymers as the donors and [6,6]-phenyl-C₆₁-butyric acid methyl ester (PCBM) as the acceptor in a 1:4 weight ratio. The device based on P2 shows a maximum power conversion efficiency of 1.75% under simulated AM 1.5 G solar irradiation (100 mW/cm²).     

含噻吩窄带隙共轭聚合物类太阳能电池材料的研究进展

含噻吩的窄带隙共轭聚合物类太阳能电池材料因其良好的稳定性和可加工性,已成为新型太阳能电池的研究热点。本论文主要介绍了用于太阳能电池的窄带隙共轭聚合物研究进展,按其结构特征分为烷基／烷氧基取代聚噻吩、含苯基聚噻吩、基于噻吩并吡嗪的共聚物、基于噻吩并噻唑的共聚物、基于噻吩并吩噻嗪的共聚物、基于烷基芴的共聚物以及其它种类的窄带隙的共轭聚合物,并对它们的结构特点、光学带隙、合成方法进行了归纳与总结。本文最后简要介绍了该研究领域目前所面临的一些问题,同时讨论了该类材料在此领域今后的发展趋势。     

New oxadiazole derivatives as promising electron transport materials: synthesis and characterization of thermal, optical and electrochemical properties

2,5-bis-(4-biphenyl)-yl-1,3,4-oxadiazole (1a), 2,5-bis-(4-(6,8-difluoro)-biphenyl)-yl-1,3,4-oxadiazole (1b) and 2,5-bis-(4-(spiro-fluorenyl)-phenyl)-yl-1,3,4-oxadiazole (1c) were designed, synthesized and characterized. 1a–c were easily obtained from Suzuki reactions between 2,5-bis-(4-bromo-phynyl)-[1,3,4]oxadiazole (2) and aromatic boronic acids (3). They were characterized by ¹H-NMR, DSC, TGA, UV-Vis, photoluminescence (PL) spectrometry and CV. The melting temperatures (T _m ) of 1a–c are 237, 208 and 370 °C, respectively, much higher than that of 2-tert-butylphenyl-5-biphenyl-1,3,4-oxadiazole (PBD, T _m = 136 °C). The oxidation potentials of 1a–c are 1.86, 1.94 and 1.18 V, and their reduction potentials are −2.31, −2.22 and −2.27 V, respectively, indicating that the introduction of electronegative oxadiazole unit lowers the electron density in molecules and enhances their stabilities. The LUMO/HOMO energy levels of 1a–c are as low as −2.39/−6.56, −2.48/−6.69 and −2.43/−5.88 eV, respectively. The good thermal stabilities and low orbital levels of 1a–c make them promising electron-transporting or hole-blocking materials for organic optoelectronic devices.     

Effect of backbone structures on photovoltaic properties in naphthodithiophene‐based copolymers

A “zigzag” naphthodithiophene‐based copolymer, poly[4,9‐bis(2‐ethylhexyloxy)naphtho[1,2‐b:5,6‐b′]dithiophene‐2,7‐diyl‐alt‐1,3‐(5‐heptadecan‐9‐yl)‐4H‐thieno[3,4‐c]pyrrole‐4,6‐dione] (P1) is synthesized and its properties are compared to “linear” naphthodithiophene‐based copolymer, poly[4,9‐bis(2‐ethylhexyloxy)naphtho[2,3‐b:6,7‐d′]dithiophene‐2,7‐diyl‐alt‐1,3‐(5‐heptadecan‐9‐yl)‐4H‐thieno[3,4‐c]pyrrole‐4,6‐dione] (P2). The field‐effect carrier mobilities and the optical, electrochemical, and photovoltaic properties of the copolymers are systematically investigated. The results suggest that the backbone of the copolymer structure significantly influences the band gap, electronic energy levels, carrier mobilities, and photovoltaic properties of the resultant thin films. In this work, the zigzag naphtho[1,2‐b:5,6‐b′]dithiophene‐based copolymer displays a good hole mobility and a high open‐circuit voltage; however, polymer solar cells in which the linear naphtho[2,3‐b;6,7‐d′]dithiophene‐based copolymer is used as the electron donor material perform better than the cells prepared using the zigzag naphtho[1,2‐b:5,6‐b′]dithiophene‐based copolymer. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 305–312     

Synthesis of the (X-DADAD)n-type conjugated polymers with 2,1,3-benzoxadiazole acceptor blocks and their application in organic solar cells

Two polymers with benzoxadiazole acceptor units were synthesized and investigated as electron donor materials in organic solar cells. Variation of the alkyl substituents was shown to significantly affect the optoelectronic properties of the polymers. In particular, the polymer HOMO energy level was lowered by 0.1 eV, while maintaining the same band gap, by replacement of the 2-ethylhexyl side-chains with the 2-hexyldecyl group. This modification also resulted in a higher open circuit voltage of the solar cells.     

Effect of branched alkyl side chains on the performance of thin‐film transistors and photovoltaic cells fabricated with isoindigo‐based conjugated polymers

New isoindigo and di(thienyl)ethylene‐containing π‐extended conjugated polymers with different branched side chains were synthesized to investigate their physical properties and device performance in thin‐film transistors and photovoltaic cells. 11‐Butyltricosane (S3) and 11‐heptyltricosane (S6) groups were used as side‐chain moieties tethered to isoindigo units. The linking groups between the polymer backbone and bifurcation point in the branched side chain differ in the two polymers (i.e., PIDTE‐S3 and PIDTE‐S6 ). The polymers bearing S6 side chains showed much better charge transport behavior than those with S3 side chains. Thermally annealed PIDTE‐S6 film exhibited an outstanding hole mobility of 4.07 cm² V^?1 s^?1 under ambient conditions. Furthermore, bulk heterojunction organic photovoltaic cells made from a blend film of PIDTE‐S3 and (6,6)‐phenyl C61‐butyric acid methyl ester demonstrated promising device performance with a power conversion efficiency in the range of 4.9–5.0%. © 2015 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 2015 , 53, 1226–1234     

Synthesis and photovoltaic properties of two‐dimensional D‐A copolymers with conjugated side chains

Four novel two‐dimensional (2D) donor–acceptor (D‐A) type copolymers with different conjugated side chains, P1 , P2 , P3 , and P4 (see Fig. 1 ), are designed and synthesized for the application as donor materials in polymer solar cells (PSCs). To the best of our knowledge, there were few reports to systematically study such 2D polymers with D‐A type main chains in this area. The optical energy band gaps are about 2.0 eV for P1 – P3 and 1.67 eV for P4 . PSC devices using P1 – P4 as donor and [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester as acceptor in a weight ratio of 1:3 were fabricated and characterized to investigate the photovoltaic properties of the polymers. Under AM 1.5 G, 100 mA/cm² illumination, a high open‐circuit voltage (V_oc) of 0.9 V was recorded for P3 ‐based device due to its low HOMO level, and moderate fill factor was obtained with the best value of 58.6% for P4 ‐based device, which may mainly be the result of the high hole mobility of the polymers (up to 1.82 × 10^?3 cm²/V s). © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and characterization of donor–bridge–acceptor alternating copolymers containing perylene diimide units and their application to photovoltaic cells

We have used Suzuki coupling to prepare a series of alternating copolymers featuring coplanar cyclopentadithiophene and hole‐transporting carbazole units. We observed quenching in the photoluminescence spectra of our polymers after incorporating pendent electron‐deficient perylene diimide ( PDI ) moieties on the side chains, indicating more efficient photoinduced electron transfer. Electrochemical measurements revealed that the PDI ‐containing copolymers displayed reasonable and sufficient offsets of the energy levels of their lowest unoccupied molecular orbitals for efficient charge dissociation. The performance of bulk heterojunction photovoltaic cells incorporating the copolymer/[6,6]‐phenyl‐C₆₁‐butyric acid methyl ester blends (1:4, w/w) was optimized when the active layer had a thickness of 70 nm. The photocurrents of the devices were enhanced as a result of the presence of the PDI moieties, thereby leading to improved power conversion efficiencies. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1298–1309, 2010     

Synthesis and photovoltaic properties of copolymers based on bithiophene and bithiazole

Three simple structured D‐A copolymers, PBTBTz‐1 , PBTBTz‐2 , and PBTBTz‐3 , containing bithiophene (BT) donor unit and bithiazole (BTz) acceptor unit with different alkyl chain length were synthesized by the Pd‐catalyzed Stille‐coupling method. The copolymers were characterized by thermogravimetric analysis, UV–vis absorption, electrochemical cyclic voltammetry, and photovoltaic measurements. The results indicate that the introduction of BTz unit to the polythiophene main chain effectively decreases highest occupied molecular orbital levels of the copolymers and increases the open circuit voltage (V_oc) of polymer solar cells (PSCs) based on the copolymers as donor, and the alkyl chain length influences the photovoltaic properties of the polymers significantly. The PSCs based on PBTBTz‐2 and PBTBTz‐3 show higher V_oc up to 0.77 and 0.81 V, respectively. The power conversion efficiency of the PSC based on PBTBTz‐2 :PC₇₀BM = 1:1(w/w) reached 2.58% with short circuit current of 8.70 mA/cm², under the illumination of AM1.5, 100 mW/cm². © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and investigation of photovoltaic properties for polymer semiconductors based on porphyrin compounds as light-harvesting units

We reported on two polymer semiconducting copolymers based on porphyrin compounds, poly[9,9-dioctylfluorene-co-5,15-bis(hexoxybenzyl)-10,20-bis(benzo-4-yl)porphyrin] (PFPor) and poly[9-(heptadecan-9-yl)carbazole-co-5,15-bis(hexoxybenzyl)-10,20-bis(benzo-4-yl)porphyrin] (PCPor), for use as organic photovoltaic materials. The thermal, optical, electrochemical, and photovoltaic properties of the two polymers were investigated. In addition, PC₆₁BM and PC₇₁BM were introduced as acceptor materials to confirm the acceptor effect in bulk heterojunction photovoltaic devices. Moreover, in order to establish acceptor effects, morphologies of polymer/PCBM blend films were analyzed through atomic force microscopy (AFM). PFPor and PCPor exhibited the best device performance with power conversion efficiencies (PCE) of 0.62% and 0.76%, respectively, upon the introduction of PC₇₁BM as the acceptor in the device where 86 wt.% of the PC₇₁BM was contained in the active layer (pol:PC₇₁BM = 1:6, w/w).     

Introducing a new triazoloquinoxaline‐based fluorene copolymer for organic photovoltaics: Synthesis,characterization, and photovoltaic properties

A new donor‐acceptor copolymer consisting of triazoloquinoxaline and 9,9‐dialkylfluorene units on the main chain has been synthesized, characterized and evaluated as donor material in bulk heterojunction solar cells using PC₆₁BM as an acceptor. The resulting polymer PTQF showed good thermal stability and solubility in common organic solvents. Cyclic Voltammetry measurements showed that the PTQF has HOMO–LUMO energy levels of ?5.13 and ?3.62 eV, respectively. DFT calculations revealed that the HOMO is delocalized all over the thiophene and fluorene units and the LUMO is localized mainly on the triazole and pyrazine units. PTQF absorbs broadly in the visible region and exhibits a bandgap of 1.4 eV. Photovoltaic devices exhibited 1.7% efficiency for 1:2 PTQF:PC₆₁BM blend ratio using Ca/Ag electrodes. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis and photovoltaic properties of conjugated copolymers based on benzimidazole and various thiophene

A new accepter unit, dimethyl‐2H‐benzimidazole, was prepared and used for the synthesis of the conjugated polymers containing electron donor–acceptor pair for organic photovoltaics (OPVs). Dimethyl‐2H‐benzimidazole unit was designed to substitute the BT unit of poly(N‐9′‐heptadecanyl‐2,7‐carbazole‐alt‐5,5‐(4′,7′‐di‐2‐thienyl‐2′,1′,3′‐benzothiadiazole)) (PCDTBT). A series of new semiconducting polymers with 2,2‐dimethyl‐2H‐benzimidazole, 9‐heptadecanyl‐9H‐carbazole, and thiophene (or bithiophene) units was synthesized using Stille polymerization to generate PCDTMBIs (or PCBBTMBIs). In dimethyl‐2H‐benzimidazole, the sulfur at 2‐position of BT unit was replaced with dialkyl substituted carbon, while keeping the 1,2‐quinoid form, to improve the solubility of the polymers. The absorption spectra of PCDTMBIs with thiophene units exhibit two maximum peaks at about 430 and 613–645 nm in solution. The solutions of PCBBTMBIs show two absorption peaks at about 445–456 and 630–645 nm which is red‐shifted about 20 nm when compared with PCDTMBIs caused by the introduction of bithiophene units. In most efficient polymer PCBBTMBI3, the device annealed at 100 °C for 10 min demonstrated a V_OC value of 0.60 V, a J_SC value of 4.31 mA/cm², and a FF of 0.35, leading to the power conversion efficiency (PCE) of 0.91%, under white light illumination (AM 1.5 G and 100 mW/cm²). © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Charge carrier mobility,photovoltaic, and electroluminescent properties of anthracene‐based conjugated polymers bearing randomly distributed side chains

This article reports on the synthesis, characterization, and properties of various anthracene‐containing poly (p‐phenylene‐ethynylene)‐alt‐poly(p‐phenylene‐vinylene) (PPE‐PPV) polymers (AnE‐PVs) bearing statistical distributions of various side chains. Primarily, the ratio of linear octyloxy and branched 2‐ethylhexyloxy side chains at the poly(p‐phenylene vinylene) (PPV) parts was varied, leading to the polymers stat, stat1, and stat2. Furthermore, polymers also containing asymmetric substituted PPV and poly(p‐phenylene ethynylene) units (bearing methoxy and 2‐ethylhexyloxy side chains) were prepared yielding stat3, stat4, and stat5. These materials exhibit a broad variation in their photovoltaic properties. It is once more shown that side chains and their distribution can crucially affect the photovoltaic device performance. The introduction of units with asymmetric substitution into these systems seems to be harmful for their utilization in photovoltaic applications. Organic field‐effect transistors were fabricated to investigate hole mobilities in these new materials. Large variance was observed, falling in the range of almost two orders of magnitude, indicating rather different π–π stacking behavior of the polymer backbones owing to side‐chain modifications. Moreover, a selection of the new polymeric systems was investigated regarding their potential for light‐emitting diode (LED) applications. Polymer LEDs using the polymers AnE‐PVstat, ‐stat3, ‐stat4, and ‐stat5, as the active layer showed turn‐on voltage of ～2 V and exhibited red light emission. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and chemosensing behavior of fluorene‐based alternating copolymers containing ether side chains and Si–vinylene units in the main chain

Alternating copolymerization of 9,9‐bis(3,6,9‐trioxadecyl)‐2,7‐dibromofluorene (ODFl) or 9,9‐bis(3,6‐dioxaheptyl)‐2,7‐dibromofluorene with Si containing divinyl compounds, divinyldiphenylsilane (VPS), or divinyldimethylsilane (VMS) is investigated using the Mizoroki–Heck reaction with palladium(II) acetate. The corresponding alternating copolymer is obtained in the copolymerization of ODFl with VPS. The copolymerization of ODFl with VMS yields low molecular weight oligomers. Optical properties of the ODFl–VPS copolymer have been investigated with UV–vis absorption and photoluminescence (PL) spectroscopy. The ODFl–VPS copolymer shows absorption peaks due to π–π* transition and intramolecular charge transfer through σ–π moiety at around 330 and 360–400 nm, respectively. An emission peak is observed at 450 nm in the PL spectrum of the ODFl–VPS copolymer, and the PL quantum yield is 0.19. The PL spectroscopy of ODFl–VPS copolymer is investigated in the presence of Li⁺, Na⁺, and K⁺, and the intensity of emission peak is decreased by those metal cations, especially by Na⁺. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Synthesis and photovoltaic properties of two-dimensional low-bandgap copolymers based on new benzothiadiazole derivatives with different conjugated arylvinylene side chains

A new series of 2,1,3-benzothiadiazole (BT) acceptors with different conjugated aryl-vinylene side chains have been designed and used to build efficient low-bandgap (LBG) photovoltaic copolymers. Based on benzo[1,2-b:3,4-b']dithiophene and the resulting new BT derivatives, three two-dimensional (2D)-like donor (D)-acceptor (A) conjugated copolymers have been synthesised by Stille coupling polymerisation. These copolymers were characterised by NMR spectroscopy, gel-permeation chromatography, thermogravimetric analysis and differential scanning calorimetry. UV/Vis absorption and cyclic voltammetry measurements indicated that their optical and electrochemical properties can be facilely modified by changing the structures of the conjugated aryl-vinylene side chains. The copolymer with phenyl-vinylene side chains exhibited the best light harvesting and smallest bandgap of the three copolymers. The basic electronic structures of D-A model compounds of these copolymers were also studied by DFT calculations at the B3LYP/6-31G* level of theory. Polymer solar cells (PSCs) with a typical structure of indium tin oxide (ITO)/poly(3,4-ethylenedioxythiophene) (PEDOT):poly(styrenesulfonate) (PSS)/copolymer:[6,6]-phenyl-C(61) (C(71) )-butyric acid-methyl ester (PCBM)/calcium (Ca)/aluminum (Al) were fabricated and measured under the illumination of AM1.5G at 100?mW?cm(-2) . The results showed that the device based on the copolymer with phenyl-vinylene side chains had the highest efficiency of 2.17?% with PC(71) BM as acceptor. The results presented herein indicate that all the prepared copolymers are promising candidates for roll-to-roll manufacturing of efficient PSCs. Suitable electronic, optical and photovoltaic properties of BT-based copolymers can also be achieved by fine-tuning the structures of the aryl-vinylene side chains for photovoltaic application.     

Poly[2,7‐(9,9‐dihexylfluorene)‐alt‐pyridine] with donor‐acceptor architectures: A new series of blue‐light‐emitting alternating copolymers

A novel series of well‐defined alternating poly[2,7‐(9,9‐dihexylfluorenyl)‐alt‐pyridinyl] (PDHFP) with donor‐acceptor repeat units were synthesized using palladium (0)‐catalyzed Suzuki cross‐coupling reactions in good to high yields. In this series of alternating polymers, 2, 7‐(9,9‐dihexylfluorenyl) was used as the light emitting unit, and the electron deficient pyridinyl unit was employed to provide improved electron transportation. These polymers were characterized by ¹H‐NMR and ¹³C‐NMR, gel permeation chromatography (GPC), thermal analyses, and UV‐vis and fluorescence spectroscopy. The glass transition temperature of copolymers in nitrogen ranged from 110 to 148 °C, and the copolymers showed high thermal stabilities with high decomposition temperatures in the range of 350 to 390 °C in air. The difference in linkage position of pyridinyl unit in the polymer backbone has significant effects on the electronic and optical properties of polymers in solution and in film phases. Meta‐linkage (3,5‐ and 2,6‐linkage) of pyridinyl units in the polymer backbone is more favorable to polymer for pure blue emission and prevention of aggregation of polymer chain than para‐linkage (2,5‐linkage) of the pyridinyl units. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4792–4801, 2004     

Synthesis and photovoltaic properties of conjugated side chains polymers with different electron‐withdrawing and donating end groups

A series of novel low band gap polymers containing conjugated side chains with 4,7‐dithien‐5‐yl‐2,1,3‐benzodiathiazole and different electron‐withdrawing end groups of aldehyde ( PT‐DTBTCHO ), 2‐ethylhexyl cyanoacetate ( PT‐DTBTCN ), 1,3‐diethyl‐2‐thiobarbituric acid ( PT‐DTBTDT ), and electron‐donating end group of 2‐methylthiophene ( PT‐DTBTMT ) have been designed and synthesized. All polymers exhibit good solubility in common organic solvents, film‐forming ability, and thermal stability. These conjugated polymers show the broad ultraviolet‐visible absorption and the narrow optical band gaps in the range of 1.65–1.90 eV. Through changing the end group of conjugated side chains, the photophysical properties and energy levels of the polymers were tuned effectively. Bulk heterojunction solar cells based on the blend of these polymers and (6,6)‐phenyl‐C₆₁‐butyric acid methyl ester (PC₆₁BM) reached the best power conversion efficiency (PCE) of 2.72%. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and photovoltaic properties of two‐dimensional copolymers based on novel benzothiadiazole and quinoxaline acceptors with conjugated dithienylbenzothiadiazole pendants

Two novel acceptors of benzo[c][1,2,5]thiadiazole and quinoxaline with conjugated dithienylbenzothiadiazole pendants were first designed and synthesized for building efficient photovoltaic copolymers. Based on benzo[1,2‐b;3,4‐b′]dithiophene donors and the two acceptors, two new copolymers have been prepared by Stille coupling polymerization. The resulting copolymers were characterized by ¹H NMR, gel permeation chromatography, and thermogravimetric analysis. UV–Visible absorption and cyclic voltammetry measurements indicated that the two copolymers possessed strong and broad absorption in the range of 300–700 nm, and deep‐lying energy levels of highest occupied molecular orbitals. The polymer photovoltaic devices based on benzo[c][1,2,5]thiadiazole‐based copolymer/phenyl‐C₇₁‐butyric acid methyl ester exhibited a power conversion efficiency of 2.42%, attributed to its relatively better light‐harvesting ability and active film morphology. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 668–677