Polyaniline-coated coconut fibers: Structure,properties and their use as conductive additives in matrix of polyurethane derived from castor oil

Electrically conducting fibers based on coconut fibers (CF) and polyaniline (PANI) were prepared through in situ oxidative polymerization of aniline (ANI) in the presence of CF using iron (III) chloride hexahydrate (FeCl_3.6H₂O) or ammonium persulfate (APS) as an oxidant. The PANI-coated coconut fibers (CF-PANI) displayed various morphologies, electrical conductivities and percentages of PANI on the CF surface. For both systems, a PANI conductive layer was present on the CF surface, which was responsible for an electrical conductivity of around 1.5 × 10⁻¹ and 1.9 × 10⁻² S cm⁻¹ for composites prepared with FeCl₃.6H₂O and APS, respectively; values that are similar to that of pure PANI. In order to modify the structure and properties of polyurethane derived from castor oil (PU) both CF-PANI and pure PANI were used as conductive additives. The PU/CF-PANI composites exhibited higher electrical conductivity than pure PU and PU/PANI blends. Additionally, the PU/CF-PANI composites showed a variation in electrical resistivity according to the compressive stress applied, indicating that these materials could be applied for pressure-sensitive applications.     

Dielectric properties of conducting polyaniline films by THz time-domain spectroscopy

The dielectric function of composite polyaniline (PANI)/polyurethane (PU) is studied in the terahertz range. Different free-standing films of composite PANI-CSA/PU with different PANI concentrations are measured by terahertz time-domain spectroscopy (THz-TDS). The Fourier transmission spectrum, the permittivity and conductivity are then precisely obtained between 0.1 and 4 THz. The behaviour of the dielectric function does not follow Drude theory and the extracted data are well fitted by Jonscher’s universal dielectric response. Furthermore, the percolation threshold is also deduced from the insulating to conducting transition extracted for several doping level at very high frequency.     

Electrodepositions and capacitive properties of hybrid films of polyaniline and manganese dioxide with fibrous morphologies

Electrocodepositions were conducted in solutions of aniline and MnSO₄ through potential cycling to afford hybrid films of polyaniline (PANI) and manganese dioxide (PANI/MnO₂). The films obtained displayed characteristic redox peaks of PANI on cyclic voltammograms in acidic aqueous solution. While in 1.0 M NaNO₃ at pH 1, the films showed pseudocapacitive behaviors from 0 to 0.65 V vs. SCE. MnO₂ was detected through XRD and XPS measurements on the films. The codeposition of PANI with MnO₂ had dramatic effects on morphologies of the obtained hybrid films that displayed fibrous morphologies instead of granular one of PANI. Hybrid film PM50 obtained in the presence of 50 mM Mn²⁺ displayed a specific capacitance of 532 F g⁻¹ at 2.4 mA cm⁻² discharging current, 26% higher than that of similarly prepared PANI. It showed a coulombic efficiency (η) of 97.5% over 1200 cycles with 76% specific capacitance maintained.     

Synthesis and characterization of red mud/polyaniline composites: Electrical properties and thermal stability

New types of conducting composites using red mud as an inorganic substrate and polyaniline as the conducting phase were prepared. Red mud/polyaniline (RM/PANI) composites were synthesized in acidic aqueous solution by the chemical oxidative polymerization of aniline using ammonium peroxydisulfate as the oxidant. The composites exhibit conductivities in the 0.42-5.2 S cm⁻¹ range, depending on the amount of polyaniline. They were characterized by infrared and UV-vis spectroscopy, scanning electron microscopy and X-ray diffraction. The IR and X-ray results show that PANI is deposited on the RM surface. The composites have a globular structure and the PANI globules synthesized on the surface of RM are smaller than those prepared under the same conditions without the substrate. Thermogravimetric analysis was used for investigation of the thermal stability of the composites. The thermal stability of the conductivity of RM/PANI composites was studied by ageing at 125 °C, the conductivity being measured in situ during this process.     

Synthesis and characterization of polyaniline nanoparticles in the presence of magnetic field and samarium chloride

A new and economical method of preparing polyaniline (PANI) nanoparticles will be introduced in this article. Compared with conventional methods, this method is much more simple and convenient. Scanning electron microscope (SEM) shows that the diameter of particles are between 30 and 50 nm, which is in good agreement with the results of a transmission electron microscope (TEM). Polyaniline/SmCl₃/Bp, polyaniline/SmCl₃ and polyaniline/HCl were prepared in a solution containing 1.0 mol dm⁻³ aniline, 1.0 mol dm⁻³ HCl with and without 0.5 mol dm⁻³ SmCl₃, in the presence and in the absence of a magnetic field, respectively. Their conductivity, UV-vis spectra, FTIR spectra, X-ray diffraction (XRD) and thermogravimetric analysis (TGA) were investigated. Changes in UV-vis and FTIR spectra indicate a strong interaction between Samarium ions (SmCl₃) and polyaniline chains. The conductivity of PANI depends on magnetization and concentration of Sm³⁺. Polyaniline/SmCl₃/Bp has the higher degree of crystallinity than that of polyaniline/HCl.     

Electrochemistry and scanning electron microscopy of polyaniline/peroxidase-based biosensor

An amperometric biosensor was prepared by in situ deposition of horseradish peroxidase (HRP) enzyme on a polyaniline (PANI)-doped platinum disk electrode. The PANI film was electrochemically deposited on the electrode at 100 mV s⁻¹/Ag-AgCl. Cyclic voltammetric characterization of the PANI film in 1 M HCl showed two distinct redox peaks, which prove that the PANI film was electroactive and exhibited fast reversible electrochemistry. The surface concentration and film thickness of the adsorbed electroactive species was estimated to be 1.85×10⁻⁷ mol cm⁻² and approximately 16 nm, respectively. HRP was electrostatically immobilized onto the surface of the PANI film, and voltammetry was used to monitor the electrocatalytic reduction of hydrogen peroxide under diffusion-controlled conditions. Linear responses over the concentration range 2.5×10⁻⁴ to 5×10⁻³ M were observed. Spectroelectrochemistry was used to monitor the changes in UV-vis properties of HRP, before and after the catalysis of H₂O₂. The biosensor surface morphology was characterized by scanning electron microscopy (SEM) using PANI-doped screen-printed carbon electrodes (SPCEs) in the presence and absence of (i) peroxidase and (ii) peroxide. The SEM images showed clear modifications of the conducting film surface structure when doped with HRP, as well as the effect of hydrogen peroxide on the morphology of biosensor.     

Electrochemiluminescence immunosensor for ultrasensitive detection of biomarker using Ru(bpy)3-encapsulated silica nanosphere labels

Here, we describe a new approach for electrochemiluminescence (ECL) assay with Ru(bpy)₃²⁺-encapsulated silica nanoparticle (SiO₂@Ru) as labels. A water-in-oil (W/O) microemulsion method was employed for one-pot synthesis of SiO₂@Ru nanoparticles. The as-synthesized SiO₂@Ru nanoparticles have a narrow size distribution, which allows reproducible loading of Ru(bpy)₃²⁺ inside the silica shell and of α-fetoprotein antibody (anti-AFP), a model antibody, on the silica surface with glutaraldehyde as linkage. The silica shell effectively prevents leakage of Ru(bpy)₃²⁺ into the aqueous solution due to strong electrostatic interaction between the positively charged Ru(bpy)₃²⁺ and the negatively charged surface of silica. The porous structure of silica shell allowed the ion to move easily through the pore to exchange energy/electrons with the entrapped Ru(bpy)₃²⁺. The as-synthesized SiO₂@Ru can be used as a label for ultrasensitive detection of biomarkers through a sandwiched immunoassay process. The calibration range of AFP concentration was 0.05-30 ng mL⁻¹ with linear relation from 0.05 to 20 ng mL⁻¹ and a detection limit of 0.035 ng mL⁻¹ at 3σ. The resulting immunosensors possess high sensitivity and good analytical performance.     

Preconcentration and speciation of inorganic and methyl mercury in waters using polyaniline and gold trap-CVAAS

Applicability of polyaniline (PANI) has been investigated for the preconcentration and speciation of inorganic mercury (Hg²⁺) and methyl mercury (CH₃Hg⁺) in various waters (ground, lake and sea waters). Preliminary experiments (batch) with powdered PANI for the quantitative removal of both Hg²⁺ and CH₃Hg⁺ showed that the retention of Hg²⁺ was almost independent of pH while a pH dependent trend from pH 1 to 12 was seen for CH₃Hg⁺ with maximum retention at pH > 5. Time dependence batch studies showed that a contact time of 10 min was sufficient to reach equilibrium. The K_d values were found to be ∼8 × 10⁴ and ∼7 × 10³ for Hg²⁺ and CH₃Hg⁺, respectively.Subsequently column experiments were carried out with PANI and the separation of the species was carried out by selective and sequential elution with 0.3% HCl for CH₃Hg⁺ and 0.3% HCl-0.02% thiourea for Hg²⁺. This was then followed by further pre-concentration of mercury on a gold trap and its determination by CVAAS. The uptake efficiency studies showed that the PANI column was able to accumulate up to 100 mg Hg²⁺/g and 2.5 mg CH₃Hg⁺/g. This method allows both preconcentration and speciation of mercury with preconcentration factors around 120 and 60 for Hg²⁺ and CH₃Hg⁺, respectively. The interfering effects of various foreign substances on the retention of mercury were investigated.     

The polyurethane membranes with temperature sensitivity for water vapor permeation

The size and shape of free-volume holes available in membrane materials control the rate of gas diffusion and its permeability. Based on this principle, two segmented thermo-sensitive polyurethane (TSPU) membranes with functional gates, i.e. the ability to sense and respond to external thermo-stimuli, were synthesized and used for water vapor controllable permeation. Differential scanning calorimetry (DSC), positron annihilation lifetimes (PAL), water swelling and water vapor permeability (WVP) were used to evaluate how the structure of the polyurethane (PU) and the temperature influence the free-volume holes size and the water vapor permeability (WVP) of the PU membranes. DSC study reveals that TSPU with a glass transition or a crystalline transition reversible phase shows an obvious phase-separated structure and a phase transition temperature (defined as switch temperature, T_s). PAL study indicates that the free-volume holes size of TSPU is closely related to the T_s. When the temperature is higher than the T_s, the ortho-positronium (o-Ps) lifetime (τ₃) and the average radius (R) of free-volume holes of TSPU membrane increase dramatically. As a result, the WVP of TSPU membrane shows a dramatic increase. Additionally, the water swelling and the WVP of TSPU membrane are found to depend on the inner structure of the polymer, and they also give different responses to temperature variation. When the temperature is higher than the T_s, there is a significant increase of WVP from 3.80 kg/m² day to 7.63 kg/m² day for TSPU(a) and from 4.30 kg/m² day to 8.58 kg/m² day for TSPU(b), respectively. Phase transition accompanying significant changes in free-volume holes size and WVP can be used to develop “smart membranes” with functional gates and controllable gas permeation.     

Lightweight electromagnetic shields using optimized polyaniline composites in the microwave band

A genetic algorithm (GA) was used to optimize a multilayer electromagnetic shield of polyaniline (PANI)–polyurethane (PU) conducting composites in the microwave band. First, the electronic properties of freestanding films with different mass fractions of polyaniline were studied. A very low percolation threshold (0.2%) was found, with a maximum of conductivity of 10⁴ S/m. Second, the electromagnetic shielding effectiveness of the films were investigated in the X and Ku bands (8.2–18 GHz), showing an attenuation increase of 1–40 dB with the mass fraction of polyaniline in the blends. Then, the electromagnetic shielding properties of multi‐layered PAni–PU composites were investigated in order to obtain an attenuation superior to 40 or 80 dB, depending on the application. To improve the performances of the electromagnetic shields, three‐layered PAni–PU composites were made, using an optimization method. The intrinsic physical parameters of the composites were used as a database for the optimization calculation. The optimization results showed that materials with a thickness of <500 µm could answer many industrial or military shielding applications. As the electronic properties can be tuned easily with the mass fraction of polyaniline in the blends, conducting multi‐layered composite materials can be made following the results of the optimization. Their electromagnetic shielding effectiveness was measured, showing good agreement between the measurements and modeling. These results demonstrated that the genetic algorithm allows us to conceive lightweight and high performance electromagnetic shields using intrinsically conducting polymers. The mass per unit of surface of the shield was <200 g/m², giving potential applications in the aeronautics domain. Copyright © 2007 John Wiley & Sons, Ltd.     

Facile synthesis of multifunctional multiwalled carbon nanotubes/Fe3O4 nanoparticles/polyaniline composite nanotubes

With an average diameter of 100-150 nm, composite nanotubes of polyaniline (PANI)/multiwalled carbon nanotubes (MWNTs) containing Fe₃O₄ nanoparticles (NPs) were synthesized by a two-step method. First, we synthesized monodispersed Fe₃O₄ NPs (d=17.6 nm, σ=1.92 nm) on the surface of MWNTs and then decorated the nanocomposites with a PANI layer via a self-assembly method. SEM and TEM images indicated that the obtained samples had the morphologies of nanotubes. The molecular structure and composition of MWNTs/Fe₃O₄ NPs/PANI nanotubes were characterized by Fourier transform infrared spectra (FTIR), energy dispersive X-ray spectrometry (EDX), X-ray photoelectron spectra (XPS), X-ray diffraction (XRD) and Raman spectra. UV-vis spectra confirmed the existence of PANI and its response to acid and alkali. As a multifunctional material, the conductivity and magnetic properties of MWNTs/Fe₃O₄ NPs/PANI composites nanotubes were also investigated.     

Prussian Blue electrodeposited on MWNTs-PANI hybrid composites for H2O2 detection

A Prussian Blue (PB)/polyaniline (PANI)/multi-walled carbon nanotubes (MWNTs) composite film was fabricated by step-by-step electrodeposition on glassy carbon electrode (GCE). The electrode prepared exhibits enhanced electrocatalytic behavior and good stability for detection of H₂O₂ at an applied potential of 0.0 V. The effects of MWNTs thickness, electrodeposition time of PANI and rotating rate on the current response of the composite modified electrode toward H₂O₂ were optimized to obtain the maximal sensitivity. A linear range from 8 × 10⁻⁹ to 5 × 10⁻⁶ M for H₂O₂ detection has been observed at the PB/PANI/MWNTs modified GCE with a correlation coefficient of 0.997. The detection limit is 5 × 10⁻⁹ M on signal-to-noise ratio of 3. To the best of our knowledge, this is the lowest detection limit for H₂O₂ detection. The electrode also shows high sensitivity (526.43 μA μM⁻¹ cm⁻²) for H₂O₂ detection which is more than three orders of magnitude higher than the reported.     

Fabrication of SiO2/CuFe2O4/polyaniline composite: A highly efficient adsorbent for heavy metals removal from aquatic environment

A novel multifunctional of SiO₂/CuFe₂O₄/polyaniline composite was synthesized through the interaction between silica (SiO₂), copper iron oxide (CuFe₂O₄), and polyaniline (PANI) as starting materials. SiO₂/CuFe₂O₄/polyaniline composite was characterized for morphology, crystallinity, textural properties, and utilised for the removal of Fe(II), Mn(II), and Cu(II) from synthetic wastewater solutions. The roles of solution pH (2.0–6.0), interaction time (15–420 min), initial ion concentration (50–700 mg/L), and solution temperature (30–50 °C) in the adsorption process were investigated. The adsorption capacities of SiO₂/CuFe₂O₄/PANI for the tested metal ions were high compared to SiO₂, CuFe₂O_4, and polyaniline. Equilibrium studies indicated that Fe(II) and Mn(II) adsorption were compliant with the Langmuir model, while the Freundlich equation described the removal of Cu(II) ions. The maximum Langmuir capacities were up to 285.71, 416.67, and 454.55 mg/g for Cu(II), Fe(II), and Mn(II), respectively. The pseudo-first-order kinetic model fitted well the metal ions removal data. The rate-controlling step reflected the involvement of surface and inner pore diffusion (intraparticle) processes. Electrostatic attractions and chelation were mainly responsible for the binding of metals ions onto SiO₂/CuFe₂O₄/PANI. The selectivity of the studied ions was governed mainly by the hydrated ionic radii and the composite adsorption active sites. SiO₂/CuFe₂O₄/PANI can be easily reused with a slight decrease (around 2–3%) in metal removal efficiency after four successive regeneration cycles.     

Synthesis and characterization of polyaniline/silicon dioxide composites and preparation of conductive films

The focus of this study was to synthesize the inherently conductive polymer polyaniline using an optimized process to prepare polyaniline/silicon dioxide (PANI/SiO₂) composites by in situ polymerization and ex situ solution mixing. PANI and PANI/SiO₂ composite films were prepared by drop‐by‐drop and spin coating methods. The electrical conductivities of HCl doped PANI film and PANI/SiO₂ composite films were measured according to the standard four‐point‐probe technique. The composite films exhibited an increase in electrical conductivity over neat PANI. PANI and PANI/SiO₂ composites were also investigated by spectroscopic methods including UV‐Vis, FT‐IR, and Photoluminescence. UV‐Vis and FT‐IR studies showed that SiO₂ particles affect the quinoid units along the polymer backbone and indicate strong interactions between the SiO₂ particles and the quinoidal sites of PANI (doping effect). The photoluminescence properties of PANI and PANI/SiO₂ composites were studied and the PANI/SiO₂ composites showed increased intensity as compared to neat PANI. The increase of conductivity of PANI/SiO₂ composite may be partially due to the doping or impurity effect of SiO₂ where the silicon dioxides compete with chloride ions. The morphology of particles and films were examined by a scanning electron microscope (SEM). SEM measurements indicated that the SiO₂ were well dispersed and isolated in composite films. Copyright © 2009 John Wiley & Sons, Ltd.     

Interfacial growth of free-standing PANI films: toward high-performance all-polymer supercapacitors

Along with high power capability and energy density, long cycle life is regarded an essential performance requirement for energy storage devices. The rapid capacitance decline of conducting polymer-based electrodes remains a major technical challenge and precludes their practical applications in supercapacitors. In this work, a polyaniline (PANI) network is synthesized via interfacial Buchwald–Hartwig polymerization for the first time, facilitating the construction of covalently connected PANI networks by ligand-promoted C–N bond formation. Particularly, the interfacial synthesis and subsequent gas release from pre-anchored protecting groups allow bottom-up and efficient access to porous cross-linked PANI (PCL-PANI) films that are free-standing and solvent-resistant. Upon assembling into supercapacitors, the PCL-PANI material enables an unprecedent long-term charge–discharge cycling performance (>18 000 times) without clear capacitance loss for an additive-free pseudocapacitive system. In addition, this synthesis affords electrodes entirely consisting of conducting polymers, yielding highly reversible gravimetric capacitance at 435 F g_electrode⁻¹ in a two-electrode system, and a high gravimetric energy of 12.5 W h kg_electrode⁻¹ while delivering an outstanding power density of 16 000 W kg_electrode⁻¹, which is 10-fold higher than those of conventional linear PANI composite supercapacitors. This synthetic approach represents a novel and versatile strategy to generate additive/binder-free and high-performance conducting thin-films for energy storage.

A covalently cross-linked polyaniline network is synthesized via interfacial Buchwald-Hartwig polymerization/deprotection, enabling the generation of additive/binder-free and high-performance conducting thin-films for energy storage.      

Fluoride-selective sensors based on polyurethane membranes doped with Zr(IV)-porphyrins

The feasibility of using Tecoflex polyurethane as a polymeric matrix for fluoride-selective membranes doped with Zr(IV)-octaethyl-(OEP) or Zr(IV)-tetraphenylporphyrins (TPP) is examined. Membranes containing cationic or anionic additives were prepared, with ionophore working according to neutral or charged carrier mechanism, respectively. Results are compared to those found previously using conventional poly(vinyl chloride) (PVC) as the membrane matrix. It was found that this polymer does not affect significantly the properties of these porphyrins, compared to poly(vinyl chloride) matrix. A dimer-monomer equilibrium determined recently to occur for Zr(IV)-porphyrins in PVC/o-NPOE membranes containing lipophilic anionic additives is also observed to occur (via UV-vis spectrophotometry) in the PU matrix. However, the equilibrium constants for dimer-monomer reactions appear to be lower in PU membranes compared to PVC films, as determined from the degree of super-Nernstian responses towards fluoride as well as the anion concentration ranges required to break the dimer as determined spectroscopically. Due to reduced dimerization of Zr(IV)[OEP]Cl₂ it was possible to obtain electrodes with PU/o-NPOE/KTFPB membranes exhibiting only slightly super-Nernstian (−64.6 mV/dec) response towards fluoride and response time (t₉₅ < 120 s) faster than observed for PVC-based membranes. Good working parameters were also obtained for this metalloporphyrin in PU membrane that forces neutral carrier mechanism (PU/DOS/TDMACl): F⁻ calibration slope −58.3 mV/dec and response time t₉₅ < 12 s. Tested membranes were subsequently applied for construction of miniaturized silicon-based sensors. Better fluoride selectivity was observed for sensors with Zr(IV)[OEP]Cl₂/PU/o-NPOE/KTFPB membranes (: ClO₄⁻ 0.7; Br⁻ −1.9; NO₃⁻ −1.9; Cl⁻ −3.1), compared to Zr(IV)[OEP]Cl₂/PU/DOS/TDMACl matrix (: ClO₄⁻ −0.8; Br⁻ −1.3; NO₃⁻ −1.5; Cl⁻ −2.1). However, latter composition was chosen to be better for flow measurement mode, as dimer formation can be totally prevented within this membrane. Sensors with Zr(IV)[OEP]Cl₂/PU/DOS/TDMACl maintained their characteristics at least for 2 months.     

Surface redox polymerized SPEEK–MO2–PANI (M = Si, Zr and Ti) composite polyelectrolyte membranes impervious to methanol

We reported sulfonated poly(ether ether ketone) (SPEEK, 61% degree of sulfonation)–metal oxides (MO₂:SiO₂, TiO₂ and ZrO₂)–polyaniline composite membranes. Metal oxides were incorporated into the swelled SPEEK membrane by sol–gel method and cured by thermal treatment. SPEEK–metal oxide membranes surfaces were modified with polyaniline (PANI) by a redox polymerization process. It was observed that water retention capacity of membrane was increased and methanol permeability was reduced due to synergetic effect of metal oxides and surface modification with polyaniline. These composite membranes showed extremely low methanol permeability (1.9–1.3 × 10⁻⁷ cm² s⁻¹), which was lower than till reported values either for SPEEK–metal oxide or SPEEK/PANI membranes. Relatively high selectivity parameter (SP) values at 343 K of these membranes, especially S–SiO₂–PANI and S–TiO₂–PANI, indicated their great advantages over Nafion117 (N117) membrane for targeting on moderate temperature applications due to the synergetic effect of MO₂ and PANI in SPEEK matrix. S–TiO₂–PANI and N117 showed comparable cell performance in direct methanol fuel cell (DMFC).     

Optimization of Polyurethane Foams for Enhanced Stir Bar Sorptive Extraction of Triazinic Herbicides in Water Matrices

In this work, polyurethane foams (PU) were developed, characterized and applied as new generation polymeric phases for stir bar sorptive extraction (SBSE) using seven triazinic herbicides (simazine, atrazine, prometon, ametryn, propazine, prometryn and terbutryn) as model compounds in water matrices. Assays performed for PU synthesis and characterization demonstrated that seven formulations presented remarkable stability and excellent mechanical and chemical resistance, for which the P₆ formulation showed the best results. By performing systematic assays on 25 mL of water samples spiked at the 10 μg/L level, it was established that the best experimental conditions using stir bars coated with P₆ were an equilibrium time of 6 h (1250 rpm), 5% of methanol as organic modifier, followed by liquid desorption with methanol as back extraction solvent under ultrasonic treatment (20 min) and high performance liquid chromatography with diode array detection (SBSE(PU)-LD-HPLC-DAD). This methodology provided good recoveries (20.4-62.0%) and remarkable reproducibility (R.S.D. <7.0%). Furthermore, excellent linear dynamic ranges between 0.9 and 16.7 μg/L (r² > 0.9949) and detection limits (0.1-0.5 μg/L) at trace level were also achieved. The application of the proposed analytical approach to analyze triazinic herbicides in ground and superficial water matrices, showed remarkable performance and by using the standard addition methodology the matrix effects are negligible. By comparing the best PU formulation (P₆, 71 μL) with commercial stir bars coated with PDMS (126 μL), recoveries normalized to the polymeric volume up to five times higher (atrazine) were attained. The ability of PU foams to extract the more polar compounds rather than PDMS makes this polymer a very valuable contribution for SBSE.     

Synthesis and characterization of new poly(azomethine ester)s having phenylthiourea units

New polyesters having azomethine and phenylthiourea groups in the polymer backbone were synthesized by interfacial polycondensation method. The dihydroxy monomer N-(4-hydroxy-3-methoxybenzal) N′-(4′-hydroxyphenyl)thiourea was condensed with six diacid chlorides: terephthaloyl, isophthaloyl, azeloyl, suberoyl, pimeloyl and adipolyl chlorides. The resulting polyesters were characterized by viscosity, IR, NMR and TGA analysis. The wholly aromatic poly(azomethine ester) derived from terephthaloyl chloride when blended with polyaniline/NH₄OH, polyaniline/HCl and pure polyaniline shows conductance in the range 3.2 × 10⁻³-0.91 × 10⁻¹ S cm⁻¹.