ABC-type miktoarm star polymers, poly(ethylene oxide)-block-polystyrene-block-poly (ε-caprolactone)s (PEO-b-PS-b-PCL) were synthesized via combination of “click” chemistry, atom-transfer radical polymerization (ATRP) and ring opening polymerization (ROP). Azide ended PEO arms, PEO-N3, and a trifunctional molecule, propargyl 2-hydroxylmethyl-2-(α-bromoisobutyraloxymethyl)-propionate (PHBP), were prepared first, respectively. A “click” reaction of PEO-N3 and PHBP generated a PEO macroinitiator, PEO-(Br)(OH) with two functionalities, one is hydroxyl group and the other is α-bromoisobutyraloxyl group. Consecutive ATRP of styrene (St) and ROP of ε-caprolactone (ε-CL) from the PEO macroinitiator produced the PEO-b-PS-b-PCL miktoarm stars. All the structures of the polymers were determined. 相似文献
A first attempt was made to produce novel ABC triblock terpolymers with three potentially crystallisable blocks: polyethylene (PE), poly(ethylene oxide) (PEO), and poly(ε-caprolactone) (PCL). Polybutadiene-b-poly(ethylene oxide) diblock copolymers were synthesized by living anionic polymerization. Then, a non-catalyzed thermal polymerization of ε-caprolactone from the hydroxyl end group of the PB-b-PEO diblock precursors was performed. Finally, hydrogenation by Wilkinson catalyst produced PE-b-PEO-b-PCL triblock terpolymers. Side reactions were detected that lead to the formation of undesired PCL-b-PEO diblock copolymers, however, these impurities were successfully removed by purification. A range of triblock terpolymers with PCL and PEO minor components were prepared. Topological restrictions on the PEO middle block prevented this block from crystallizing while the complex crystallization behavior of the PE and PCL blocks was documented by DSC and WAXS measurements. 相似文献
The synthesis of poly(ethylene oxide-b-2-methyl-2-oxazoline) (PEO-POXZ) block copolymers was carried out by the polymerization of 2-methyl-2-oxazoline (MeOXZ) from monomethoxy poly(ethylene oxide) macroinitiator. The initiating functions were 4-chloromethylbenzoate or tosylate groups. The functionalization of α-methoxy-ω-hydroxy PEO was optimized by adjustment of the reaction temperature. The duplication side reaction was investigated in the case of tosylate functionalization. The determination of the propagation rate constants of the MeOXZ polymerization showed that the presence of the PEO chains decreased the propagation rate constant in the case of active species under the form of oxazolinium ions, while it increased the propagation rate constant in the case of covalent active species, most probably by partial ionization. 相似文献
Gold nanoparticles of improved stability against aggregation were prepared using poly(ethylene oxide)-block-poly(epsilon-caprolactone) (PEO-b-PCL) star-block copolymers. A five-arm star-shaped macroinitiator (PEO) was utilized for the automated parallel controlled ring-opening polymerization of epsilon-caprolactone to prepare a series of PEO-b-PCL star-block copolymers with a constant PEO core linked to PCL blocks of variable length. The PEO core was swelled with KAuCl4 in N,N-dimethylformamide (DMF), and gold nanoparticles were subsequently obtained by reduction with NaBH4. Since the process was always templated by the same PEO core for all investigated polymers, the average dimension of the formed gold nanoparticles was in the same range for all star-block copolymers. In sharp contrast, the size distribution and long-term stability against aggregation of the gold nanoparticles dispersed in DMF were strongly dependent on the PCL block length, confirming the role of PCL blocks as stabilizing blocks for these nanoparticles. 相似文献
Summary: Star‐shaped hydroxy‐terminated poly(ε‐caprolactone)s (ssPCL), with arms of different lengths, were obtained by ring‐opening polymerization (ROP) of ε‐caprolactone initiated by pentaerythritol, and were condensed with α‐methyl‐ω‐(3‐carboxypropionyloxy)‐poly(ethylene oxide)s ( = 550–5 000) to afford four‐armed PCL‐PEO star diblock copolymers (ssPCL‐PEO). The polymers were characterized by 1H and 13C NMR spectroscopy and size‐exclusion chromatography (SEC). The melting behavior of ssPCLs was studied by differential scanning calorimetry (DSC). X‐ray diffraction and DSC techniques were used to investigate the crystalline phases of ssPCL‐PEOs.
The part of the synthesis of four‐armed star‐shaped diblock poly(ε‐caprolactone)‐poly(ethylene oxide) copolymers as described. 相似文献
We report novel micellar carriers, comprising pendant cinnamyl moieties in the core-forming block, designed to increase the solubilization of caffeic acid phenethyl ester (CAPE) in aqueous media. Amphiphilic poly(ethylene oxide)-block-poly(α-cinnamyl-ε-caprolactone-co-ε-caprolactone) (PEO-b-P(CyCL-co-CL) diblock copolymers were synthesized by ring-opening copolymerization of α-propargyl-ε-caprolactone and ε-caprolactone from a monofunctional PEO macroinitiator and subsequent attachment of cinnamyl groups via click reaction. In addition, a linear PEO-b-PCL diblock copolymer was synthesized and used in this study for comparison. Next, nanosized micelles from PEO-b-P(CyCL-co-CL) and PEO-b-PCL were formed via the solvent evaporation method and then loaded with CAPE. Dynamic and electrophoretic light scattering, and transmission electron microscopy were used to characterize both blank and loaded carriers. The potential of the micelles comprising pendant cinnamyl group to solubilize CAPE in water was evaluated in a comparative fashion to that of nonmodified PEO-b-PCL diblock copolymer. 相似文献
The novel comb-type biodegradable graft copolymers based on ε-caprolactone and l-lactide were synthesized. Firstly, 2-oxepane-1,5-dione (OPD) was synthesized by the Baeyer-Villiger oxidation of 1,4-cyclohexanedione, and was subsequently copolymerized with ε-caprolactone (CL) to produce poly(2-oxepane-1,5-dione-co-ε-caprolactone) (POCL) catalyzed by stannous(II) 2-ethylhexanoate in toluene. Then, POCL was converted into poly(4-hydroxyl-ε-caprolactone-co-ε-caprolactone) (PHCL) using sodium borohydride as reductant. Finally, poly(4-hydroxyl-ε-caprolactone-co-ε-caprolactone)-g-poly(l-lactide) (PHCL-g-PLLA) were prepared successfully by bulk ring-opening polymerization of l-lactide using PHCL as a macro-initiator. All the copolymers have been characterized by 1H and 13C NMR, DSC, and GPC. Compared with the random copolymer of poly(CL-co-LA), the elongation is highly increased. And the thermal analysis showed that the crystallization rate of the PCL backbone in the graft copolymers was greatly reduced compared to the PCL homopolymer. The hydrolytic degradation of the copolymer was much faster in a phosphate buffer (pH = 7.4) at 37 °C, which is confirmed by the weight loss and change of intrinsic viscosity. 相似文献
A series of amphiphilic copolymers, dextran-graft-methoxypolyethylene glycol/poly(ε-caprolactone) (Dex-g-mPEG/PCL) were synthesized by grafting both PCL and mPEG chains to dextran, and subsequently the micellar self-assembly behavior of resultant copolymers was investigated. PCL was designed by using Fmoc-protected valine other than organometallic catalyst as the initiator to ring-opening polymerize ε-caprolactone (CL) in view of the safety demand as well as the extra application potential resulting from -NH2 group introduced after Fmoc deprotection. All the copolymers were characterized by 1H NMR, FT-IR and GPC measurements. The prepared copolymers are capable of self-assembling into nanosized spherical micelles in aqueous solution with the diameter of around 100-200 nm determined by TEM image and DLS measurement. The critical micellar concentration (CMC) of the graft copolymers is in the range of 10-100 mg/L determined by the fluorescence robe technique using pyrene. The result also indicated that the CMC of self-assembled micelles could be adjusted by controlling the degree of substitution of mPEG and PCL, and these micelles may find great potential as drug carriers in biomedical fields. 相似文献
The preparation of block copolymers consisting of poly(4-vinylpyridine) (P4VP) by atom transfer radical polymerization (ATRP) was investigated. The goal was to synthesize water-soluble block copolymers with poly(ethylene oxide) (PEO) as first block, a water-soluble polymer at any pH. First, a PEO macroinitiator was prepared for the ATRP block copolymerization of 4-vinylpyridine. In the second stage, the kinetic behaviour of this block copolymerization was investigated for two different types of PEO-macroinitiators and catalyst systems, based on CuCl or CuCl2/Cu(0), with tris[2-(dimethylamino)ethyl]amine (Me6-TREN) as the ligand. Various combinations of initiator and catalyst led to a controlled block copolymerization with optimized results obtained for chlorinated poly(ethylene glycol) monomethyl ether as macroinitiator, together with CuCl2/Cu(0)/Me6-TREN as catalyst system. With the latter system, narrow polydispersities (1.25) could be reached for PEO-P4VP block copolymers. 相似文献
Amphiphilic triblock copolymers of poly(methyl methacrylate)-b-poly(ethylene oxide)-b-poly(methyl methacrylate) (PMMA-b-PEO-b-PMMA) with well-defined structure were synthesized via atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) initiated by the PEO macroinitiator. The macroinitiator and triblock copolymer with different PMMA and/or PEO block lengths were characterized with 1H and 13C NMR and gel permeation chromatography (GPC). The micelle formed by these triblock copolymers in aqueous solutions was detected by fluorescence excitation and emission spectra of pyrene probe. The critical micelle concentration (CMC) ranged from 0.0019 to 0.016 mg/mL and increased with increasing PMMA block length, while the PEO block length had less effect on the CMC. The partition constant Kv for pyrene in the micelle and in aqueous solution was about 105. The triblock copolymer appeared to form the micelles with hydrophobic PMMA core and hydrophilic PEO loop chain corona. The hydrodynamic radius Rh,app of the micelle measured with dynamic light scattering (DLS) ranged from 17.3 to 24.0 nm and increased with increasing PEO block length to form thicker corona. The spherical shape of the micelle of the triblock copolymers was observed with an atomic force microscope (AFM). Increasing hydrophobic PMMA block length effectively promoted the micelle formation in aqueous solutions, but the micelles were stable even only with short PMMA blocks. 相似文献
A stable nitroxyl radical functionalized with two initiating groups for atom transfer radical polymerization (ATRP), 4-(2,2-bis-(methyl 2-bromo isobutyrate)-propionyloxy)-2,2,6,6-tetramethyl-1-piperidinyloxy (Br2-TEMPO), was synthesized by reacting 4-hydroxyl-2,2,6,6-tetramethyl-1-piperidinyloxy with 2,2-bis-(methyl 2-bromo isobutyrate) propanoic acid. Stable free radical polymerization of styrene was then carried out using a conventional thermal initiator, dibenzoyl peroxide, along with Br2-TEMPO. The obtained polystyrene had two active bromine atoms for ATRP at the ω-end of the chain and was further used as the macroinitiator for ATRP of methyl acrylate and ethyl acrylate to prepare AB2-type miktoarm star-shaped copolymers. The molecular weights of the resulting miktoarm star-shaped copolymers at different monomer conversions shifted to higher molecular weights without any trace of the macroinitiator, and increased with monomer conversion. 相似文献
The synthesis of an amphiphilic triarm star copolymer based on polystyrene, poly(ethylene oxide) and poly(ε-caprolactone) block has been achieved by a novel strategy which consists in the preparation of a diblock copolymer, polystyrene-block-poly(ethylene oxide), having a protected anionic initiator group at the junction of the two blocks. After deprotection, this function is activated by a coloured and weakly basic carbanion. The generated alcoholate initiates the ε-caprolactone anionic polymerization. 相似文献
A series of ester-ether copolymers were obtained via the reaction between α,ω-dihydroxyl poly(ϵ-caprolactone) (PCL) and ethylene oxide (EO) or monosubstituted epoxides catalyzed by strong phosphazene bases. The two types of monomeric units were distributed in highly random manners due to the concurrence of epoxide ring-opening and fast transesterification reactions. The substituent of epoxide showed an interesting bidirectional effect on the enzymatic degradability of the copolymer. Compared with PCL, copolymers derived from EO exhibited enhanced hydrophilicity and decreased crystallinity which then resulted in higher degradability. For the copolymers derived from propylene oxide and 1,2-butylene oxide, the hydrophobic alkyl pendant groups also allowed lower crystallinity of the copolymers thus higher degradation rates. However, further enlarging the pendant groups by using styrene oxide or 2-ethylhexyl glycidyl ether caused a decrease in the degradation rate, which might be ascribed to the higher bulkiness hindering the contact of ester groups with lipase. 相似文献