磺化聚苯乙炔/多壁碳纳米管复合材料导电机理研究

将磺化聚苯乙炔(SPPA)与多壁碳纳米管(MWNT)超声共混制备得到SPPA/MWNT复合材料. 用四探针电阻率测试、场发射扫描电镜(FESEM)、XPS、UV-Vis、XRD等方法对复合材料导电机理进行研究. 结果表明, SPPA/MWNT的电导率发生两次突跃；掺杂剂MWNT具有低的临界阈值; 临界阈值附近, 复合材料中MWNT具有不连续分布的现象及复合材料电阻呈负温度系数(NTC)效应; SPPA/MWNT复合材料中MWNT的碳原子对SPPA 进行掺杂. 推测复合材料的导电机理为, 共轭聚合物SPPA不仅被导电粒子MWNT物理填充, 同时还被MWNT的碳原子掺杂, 使复合材料中存在两种导电通路而导电, 一是因被掺杂而成为高电导率主体的SPPA相互接触形成的导电通路, 二是MWNT相互接触形成的导电通路.     

Multiwalled carbon nanotube promotes crystallisation while preserving co-continuous phase morphology of polycarbonate/polypropylene blend

The influence of multiwalled carbon nanotubes (MWCNTs) on phase morphology, lamellar structure, thermal stability, melting behaviour and isothermal crystallisation kinetics of polycarbonate/polypropylene (PC/PP) blend nanocomposites has been investigated. Both neat blends and PC/PP (60/40)/MWCNT nanocomposites were prepared by melt mixing method. Morphological analyses were performed by high-resolution X-ray micro-computed tomography and scanning electron microscopy. The co-continuous morphology of the blend was retained irrespective of MWCNT loading. In addition, a substantial refinement in the co-continuous structure was observed. Wide angle and small angle X-ray scattering studies were used to analyse the structural properties of the blend nanocomposites. The addition of MWCNT increases the long period of polypropylene. The influence of addition of MWCNT on the crystallisation temperature and equilibrium melting temperature (Tm°) of polypropylene was followed. The MWCNTs promote crystallisation rate of polypropylene in the blend nanocomposites.     

Assembly of well-aligned multiwalled carbon nanotubes in confined polyacrylonitrile environments: electrospun composite nanofiber sheets

Highly oriented, large area continuous composite nanofiber sheets made from surface-oxidized multiwalled carbon nanotubes (MWNTs) and polyacrylonitrile (PAN) were successfully developed using electrospinning. The preferred orientation of surface-oxidized MWNTs along the fiber axis was determined with transmission electron microscopy and electron diffraction. The surface morphology and height profile of the composite nanofibers were also investigated using an atomic force microscope in tapping mode. For the first time, it was observed that the orientation of the carbon nanotubes within the nanofibers was much higher than that of the PAN polymer crystal matrix as detected by two-dimensional wide-angle X-ray diffraction experiments. This suggests that not only surface tension and jet elongation but also the slow relaxation of the carbon nanotubes in the nanofibers are determining factors in the orientation of carbon nanotubes. The extensive fine absorption structure detected via UV/vis spectroscopy indicated that charge-transfer complexes formed between the surface-oxidized nanotubes and negatively charged (-CN[triple bond]N:) functional groups in PAN during electrospinning, leading to a strong interfacial bonding between the nanotubes and surrounding polymer chains. As a result of the highly anisotropic orientation and the formation of complexes, the composite nanofiber sheets possessed enhanced electrical conductivity, mechanical properties, thermal deformation temperature, thermal stability, and dimensional stability. The electrical conductivity of the PAN/MWNT composite nanofibers containing 20 wt % nanotubes was enhanced to approximately 1 S/cm. The tensile modulus values of the compressed composite nanofiber sheets were improved significantly to 10.9 and 14.5 GPa along the fiber winding direction at the MWNT loading of 10 and 20 wt %, respectively. The thermal deformation temperature increased with increased MWNT loading. The thermal expansion coefficient of the composite nanofiber sheets was also reduced by more than an order of magnitude to 13 x 10(-6)/ degrees C along the axis of aligned nanofibers containing 20 wt % MWNTs.     

Construction of an electrochemical sensor based on the electrodeposition of Au-Pt nanoparticles mixtures on multi-walled carbon nanotubes film for voltammetric determination of cefotaxime

Mixtures of gold-platinum nanoparticles (Au-PtNPs) are fabricated consecutively on a multi-walled carbon nanotubes (MWNT) coated glassy carbon electrode (GCE) by the electrodeposition method. The surface morphology and nature of the hybrid film (Au-PtNPs/MWCNT) deposited on glassy carbon electrodes is characterized by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV) techniques. The modified electrode is used as a new and sensitive electrochemical sensor for the voltammetric determination of cefotaxime (CFX). The electrochemical behavior of CFX is investigated on the surface of the modified electrode using linear sweep voltammetry (LSV). The results of voltammetric studies exhibited a considerable improvement in the oxidation peak current of CFX compared to glassy carbon electrodes individually coated with MWCNT or Au-PtNPs. Under the optimized conditions, the modified electrode showed a wide linear dynamic range of 0.004-10.0 μM with a detection limit of 1.0 nM for the voltammetric determination of CFX. The modified electrode was successfully applied for the accurate determination of trace amounts of CFX in pharmaceutical and clinical preparations.     

Controlled functionalization of multiwalled carbon nanotubes with various molecular-weight poly(L-lactic acid)

Multiwalled carbon nanotubes (MWNT) were functionalized with poly(L-lactic acid) (PLLA) with different molecular weights using a "grafting to" technique. The oxidized MWNT (MWNT-COOH) were converted to the acyl-chloride-functionalized MWNT (MWNT-COCl) by treating them with thionyl chloride (SOCl2) and reacting them with PLLA to prepare the MWNT-g-PLLA. FTIR and Raman spectroscopy revealed that the PLLA was covalently attached to the MWNT, and the weight gain due to the functionalization was determined by thermogravimetric analyses (TGA). The Raman signals of the MWNT were greatly weakened as a result of the PLLA grafting. The morphology of the grafted PLLA was examined by using SEM and TEM. The amount of grafted PLLA depended on the molecular weight of the PLLA. The PLLA coated on the MWNT became thicker and more uniform with increasing PLLA molecular weight from 1000 to 3000. However, the amount of grafted PLLA became lower when the molecular weight of PLLA was further increased to 11,000 and 15,000, and the PLLA attached to the MWNT showed a squid leglike morphology forming blobs and leaving much of the MWNT surface bare.     

Morphological and mechanical properties of carbon nanotube/polymer composites via melt compounding

The mechanical properties and morphology of multiwall carbon nanotube (MWNT)/polypropylene (PP) nanocomposites were studied as a function of nanotube orientation and concentration. Through melt mixing followed by melt drawing, using a twin screw mini‐extruder with a specially designed winding apparatus, the dispersion and orientation of MWNTs was optimized in PP. Tensile tests showed a 32% increase in toughness for a 0.25 wt % MWNT in PP (over pure PP). Moreover, modulus increased by 138% with 0.25 wt % MWNTs. Transmission electron microscopy and scanning electron microscopy demonstrated qualitative nanotube dispersion and orientation. Wide angle X‐ray diffraction was used to study crystal morphology and orientation by calculating the Herman's orientation factor for the composites as function of nanotube loading and orientation. The addition of nanotubes to oriented samples causes the crystalline morphology to shift from α and mesophase to only α phase. Furthermore, the addition of nanotubes (without orientation) was found to cause isotropization of the PP crystal, and drawing was shown to improve crystal orientation through the orientation factor. In addition, differential scanning caloriometry qualitatively revealed little change in overall crystallinity. In conclusion, this work has shown that melt mixing coupled with melt drawing has yielded MWNT/PP composites with a unique combination of strength and toughness suitable for advanced fiber applications, such as smart fibers and high‐performance fabrics. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 864–878, 2006     

聚3-辛基噻吩/MWNTs复合材料的导电性能研究

采用在氯仿溶液中超声共混, 制备聚3-辛基噻吩(P3OT)和多壁碳纳米管(MWNTs)复合材料. 当MWNTs掺杂量为3%时复合材料的电导率为1.43 S•m－1, 达到纯MWNTs的电导率水平. 用FTIR光谱, TG, UV-Vis光谱, XPS和FESEM进行研究分析, 认为MWNTs的离域电子与P3OT主链上的π电子之间形成π-π共轭, 增加了P3OT主链的有效共轭度, 被掺杂的P3OT具有很高的电导率, 提高了复合材料的导电性能. MWNTs与被掺杂的P3OT组成相对独立的导体单元, 对复合材料的导电网络形成起着主要作用.     

Preparation of Amino-functionalized Multiwall Carbon Nanotube/Gold Nanoparticle Composites

Multiwall carbon nanotubes (MWNT) were modified orderly with carboxyl groups and amino groups. The MWNT/gold nanoparticle composites were formed when the amino‐functionalized MWNT was interacted with gold colloids. The functionalized MWNT was characterized using Fourier transform infrared spectroscopy and X‐ray photoelectron spectroscopy. The amino‐functionalized MWNT allows further attaching gold nanoparticles through electrostatic interaction between the negatively charged gold nanoparticles and amino groups on the surface of the MWNT. The composite of gold nanoprticles and amino‐functionalized MWNT was characterized by transmission electron microscopy. This method decorating carbon nanotubes can be used to identify the location of functional groups, i.e. defect sites on carbon nanotubes.     

Development of core‐shell structure aided by SiC‐coated MWNT in ABS/LCP blend

Agglomeration is an issue of major concern for unmodified multi‐walled carbon nanotubes (MWNTs)‐aided polymeric composites. To overcome the above‐mentioned problem, multi‐walled carbon nanotubes (MWNTs) are modified by polycarbosilane (PCS)‐derived Silicone carbide (SiC). Acrylonitrile Butadiene Styrene (ABS)/Liquid Crystalline polymer (LCP)/MWCNT nanocomposites are prepared through melt blending in a twin screw extruder. X‐Ray Diffraction (XRD) studies authenticate the creation of ß‐SiC particles. Field Emission Scanning Electron Microscopy (FESEM) and Transmission Electron Microscopy (TEM) studies reveal the formation of core–shell morphology involving MWNT as the core and SiC‐coated MWNT as the shell. The degree of dispersion of MWNT is far better when it has been coated with SiC. As viewed from Thermo‐gravimetric analysis (TGA), the thermal stability is substantially increased in SiC‐aided nanocomposite in comparison to ABS/LCP/unmodified CNT blend. Glass transition temperature as well as mechanical properties are improved significantly (in the presence of SiC‐coated MWNT) as a result of homogeneous dispersion exhibited by MWNT. Copyright © 2009 John Wiley & Sons, Ltd.     

氨基卟啉共价化学修饰多壁碳纳米管

合成了5-(4-氨基)苯基-10,15,20-三苯基卟啉及其铜配合物, 通过化学键将氨基卟啉与活化的多壁碳纳米管(MWNT)发生酰胺化反应, 从而得到卟啉有机共价化学修饰的多壁碳纳米管的复合物. 通过红外光谱对产物的化学结构进行了表征, 证实了复合物体系中酰胺反应的发生. 紫外可见光吸收光谱和荧光光谱分析确定了卟啉与多壁碳纳米管间存在强烈的电子效应. 通过透射电镜(TEM)观察了产物的形貌特征, 发现碳纳米管壁上连接上了氨基卟啉小分子, 进一步证实了酰胺化反应的发生.     

表面引发原子转移自由基聚合制备聚电解质修饰的碳纳米管

利用聚电解质对多壁碳纳米管(MWNT)的表面进行修饰,能有效改善碳纳米管在溶剂中的分散性.首先将经硝酸氧化的碳纳米管与二甲亚砜和乙二醇反应,得到羟基修饰的碳纳米管.然后利用羟基与α-溴异丁酰溴(或α-氯丙酰氯)的酯化反应,在碳纳米管的表面引入了原子转移自由基聚合(atom transfer radical polymerization,ATRP)引发基团,引发丙烯酸叔丁酯(tBA)或4-乙烯基吡啶(4VP)聚合,通过投料比的改变,得到接入量不同的聚合物修饰的碳纳米管.利用热重分析(TGA)和红外对聚合物修饰的碳纳米管进行表征.将聚合物修饰的碳纳米管进行水解(或季胺化),制备得到在水溶液中良好分散的聚电解质修饰的碳纳米管.     

聚氨酯接枝多壁碳纳米管的制备及表征

采用两步法成功地将聚氨酯分子链以共价键连接到碳纳米管表面. 首先将聚丙烯酰氯通过与强酸氧化后多壁碳纳米管表面产生的羟基及少量羧基之间的化学反应共价接枝到碳纳米管表面; 然后将接枝到碳纳米管表面的聚丙烯酰氯与端羟基聚氨酯发生酯化反应, 实现了聚氨酯对碳纳米管的表面共价接枝. 采用傅里叶变换红外光谱(FTIR)、透射电镜(TEM)、扫描电镜(SEM) 和热重分析(TGA)等对接枝后的产物进行了表征, 结果表明, 聚氨酯已共价接枝到碳纳米管表面, 被接枝的聚合物的含量接近90%.     

Elongational Viscosity and Foaming Behavior of PP Modified by Electron Irradiation or Nanotube Addition

Summary : In this study, two different routes were chosen which are expected to influence the elongational viscosity and, thus, the foaming behavior of polypropylene (PP). Electron irradiation of a linear PP was performed at room temperature using different doses. Enhanced long-chain branching was observed with increased irradiation dose. In addition, a linear PP was filled with 5 wt% multiwalled carbon nanotubes (MWNT) by melt mixing at 200 °C. These modified PP materials were investigated with respect to their shear and elongational behavior. After foaming, irradiated PP led to an expansion factor which is about 60% higher than that of the non-irradiated product. In case of PP filled with 5 wt% MWNT the value of the expansion factor is about 70% higher than that of pure PP expanded under the same conditions. The cell structure is much finer in both cases as compared to unmodified PP.     

多壁碳纳米管/溴/聚苯乙炔三元共混物导电性能的研究

通过机械共混和溶液共混制备了多壁碳纳米管(MWNTs)/溴/聚苯乙炔(PPA)三元复合材料,复合材料表现出良好的导电性能,电导率为10S/m,达到掺溴MWNTs的导电水平.通过固体紫外光谱、XPS和SEM分析了复合材料中MWNTs、溴与PPA三者之间的相互作用,研究了独立导电单元的形成,以及导电单元对电导率提高所起的作用.结果表明,当MWNTs含量较低时,MWNTs和PPA之间的溴转移导致复合材料电导率降低;MWNTs含量较高时,独立导电单元的数目增多,复合材料的电导率随之大幅提高.     

单晶CaSO4纳米管的制备——非片状结构化合物形成纳米管的新途径

以Ti-O-Ti油酸偶合体作为结构引导生长剂,采用溶剂热技术成功地制备了单晶无水硫酸钙纳米管,并通过XRD、X射线能谱(EDX)、TEM、选区电子衍射(CBED)对CaSO₄纳米管进行了表征.其晶格常数与JCPDS标准卡单斜相CaSO₄晶体数值一致,属P3m1(164)空间群.纳米管呈均匀的直管形,直径约为30nm,内径约为10nm,长度达到3.0μm.并对硫酸钙纳米管的形成机理进行了浅析,提出了非片状结构的离子晶体,通过结构引导生长剂诱导生长成为片状结构,在溶剂热条件下弯曲、旋转、卷拢形成纳米管的新方法.     

含氟聚合物修饰碳纳米管及其聚氨酯复合疏水膜的研究

利用羟基碳纳米管上的羟基与2-溴异丁基酰溴之间的简单反应, 在碳纳米管上引入了含溴ATRP引发剂, 并进一步引发含氟丙烯酸酯的ATRP聚合, 从而在碳纳米管表面接枝上了低表面能的含氟聚合物. 红外光谱(FT-IR)、热重分析(TGA)和透射电镜(TEM)的研究结果表明碳纳米管与含氟聚合物之间为化学键连接. 以此低表面能聚合物包裹的碳纳米管作为填充粒子, 采用溶液浇铸方法制备了聚氨酯/碳纳米管复合膜, 并利用溶剂四氢呋喃(THF)刻蚀表面获得了不同碳纳米管裸露程度的复合膜材料. 静态接触角测试结果表明, 无论是羟基碳纳米管还是低表面能修饰的碳纳米管均可提高其复合膜的疏水性能, 且其疏水性能随碳纳米管含量的增加而增加; 相同含量时, 含氟聚合物接枝后的碳纳米管使复合膜具有更佳的疏水性能, 膜表面经溶剂刻蚀后可显著提高其疏水性能. 采用扫描电子显微镜(SEM)研究了加入碳纳米管和溶剂刻蚀对聚合物表面微观结构以及材料表面疏水性能的影响. 上述结果表明: 利用接枝聚合物可改变碳纳米管本身的疏水性能, 并可进一步制备新型的具有表面疏水性能的聚合物纳米复合材料.     

Highly dispersed Pt nanoparticles immobilised on 3-amino-silane-modified MWNT materials for methanol oxidation

We demonstrate the use of molecular monolayers to enhance the nucleation of electrocatalytically active platinum nanocrystals onto carbon nanotubes. The multiwalled carbon nanotube (MWNT) is embedded within the polysiloxane shell with large amounts of hydrophilic amino groups outside after the siloxane is polymerized on the nanotube surfaces. Subsequent deposition of platinum nanoparticles led to high densities of 2- to 5-nm diameter Pt nanocrystals uniformly deposited along the length of the carbon nanotubes. The structure and nature of the resulting Pt/Si–MWNT composites were characterized by transmission electron microscopy and X-ray diffraction. Electrochemical measurements show that the molecular monolayers do not impede redox behavior of the electrode, and measurements of the electrocatalytic oxidation of methanol show very high catalytic efficiency.     

The role of multi-walled carbon nanotubes in shear enhanced crystallization of isotactic poly(1-butene)

The flow-induced crystallization behavior of nanocomposites, containing isotactic poly(1-butene) (PB) and functionalized multi-walled carbon nanotubes (MWNT), was investigated. Three different MWNT concentrations (0.1, 1, 5 wt%) were used to prepare the nanocomposites. Effects of MWNT and shear flow on the crystallization parameters were evaluated separately. Rheological measurements based on oscillatory shear revealed induction time and crystallization half-time at the quiescent state, where both parameters exhibited the nucleating effect of MWNT on PB. Rheological measurements based on steady-state shear flow and short-time shear flow revealed the evolution of molecular orientation, which was studied in both PB and its nanocomposites. A small increase in crystallization kinetic was recorded in PB under shear having moderate values of the Weissenberg (We) number. On the other hand, a dramatic synergistic effect of MWNT and shear was detected under the same shear conditions for nanocomposites. The optical microscopic images exhibited a clear transition from isotropic to row-like morphology in the case of nanocomposites under shear.     

Novel alcohol sensor based on PtRuNi ternary alloy nanoparticles–multi-walled carbon nanotube–ionic liquid composite coated electrode

A novel alcohol sensor was proposed in the present work, which was based on the pulsed electrodeposition of PtRuNi ternary alloy nanoparticles on multi-walled carbon nanotubes (MWNTs)–ionic liquid (IL, i.e. 1-octyl-3-methylimidazolium hexaflurophosphate, OMIMPF₆) gel film. The composition, morphology and catalytic activity of the obtained nanoparticles were characterized by X-ray diffraction, energy dispersive X-ray spectroscopy, scanning electron microscopy and voltammetry, respectively. The PtRuNi–MWNT–IL coated glassy carbon electrode was proved to be suitable for detecting alcohol. The analytical characteristics of the resulting sensor, in terms of poison tolerance, response time, linear range, detection limit, sensitivity, reproducibility and long-term stability were explored and satisfying results were obtained. For comparison, the electrodes with PtRuCo, PtRu and Pt nanoparticles were also prepared and studied.     

Comparisons Among Electrical and Rheological Properties of Melt-Mixed Composites Containing Various Carbon Nanostructures

The present investigation compares different carbon-based nanoscaled materials with regard to their effectiveness in producing thermoplastic polymers with antistatic and electrically conductive behavior. The dispersed phases are carbon black (CB) as spherical particles, multiwalled carbon nanotubes (MWNT) as fiber-like filler, and expanded graphite (EG) as platelet-like filler. Each was incorporated into polycarbonate by small-scale melt mixing. The electrical percolation concentrations were found to be 2 wt% for MWNT, 4 wt% for EG, and 8.75 wt% for CB which parallels the aspect ratios of the fillers. For EG a strong dependence of morphology and electrical resistivity on mixing time was observed, indicating a structural change/destruction during intensive shear mixing. Rheological percolation thresholds were found to be lower than electrical percolation threshold for the MWNT and CB, but similar in the case of EG. The general impact on complex melt viscosity decreases in the order MWNT, CB, EG. For EG, at higher loadings (above 4wt%) the viscosity increase with filler content is delayed as is the decrease in resistivity.