共查询到20条相似文献,搜索用时 46 毫秒
1.
Petr Svoboda Dagmar Svobodova Petr Slobodian Toshiaki Ougizawa Takashi Inoue 《Polymer Testing》2009,28(2):215-222
Blends of polypropylene and ethylene–octene copolymers (EOC) were investigated by transmission electron microscopy, optical microscopy and differential scanning calorimetry (DSC). The main focus was on phase morphology and crystallization for blends containing EOC with different octene content (28, 37 and 52 wt.%). Also, for a given octene content (37 wt.%), the effect of molecular weight (115, 180, 229k) of EOC on morphology was observed. The largest particles were found in the blend with EOC-28 and the smallest with EOC-52. This blend with the smallest particles exhibits the fastest crystallization kinetics by two independent methods, optical microscopy and DSC. This behavior was explained by a model. Crystallizing polypropylene lamellae have to travel a longer distance going around large particles, which slows down overall crystallization growth rate. In the case of smaller particles, the obstacles are smaller and the crystallization is faster. 相似文献
2.
Kui Wang Frédéric Addiego Nadia Bahlouli Saïd Ahzi Yves Rémond Valérie Toniazzo René Muller 《Polymer Degradation and Stability》2012,97(8):1475-1484
The impact of recycling by grinding and re-extrusion on the physical and mechanical properties of polypropylene (PP)/ethylene octene copolymer (EOC) blends was investigated. The considered EOC content was 0 wt. %, 10 wt. % and 20 wt. %, and the investigated number of recycling passes (extrusions) was 0, 1, 3 and 6. Up to 6 re-extrusions, an increase of the melt flow index (MFI), a slight increase of the crystallinity, a slight decrease of the decomposition temperature (Tonset), and no significant oxidation were noted. Therefore, the recycling of the blends induces thermomechanical degradation by chain scission without oxidation. Increasing the content of EOC increases the MFI and the Tonset of the PP blends. The first recycling procedure induced an increase of the Young's modulus and tensile yield stress, while for higher recycling numbers, these two parameters dropped. The EOC inclusions stabilized the tensile elongation at break up to 3 recycling procedures due to a decrease of their size and a homogenization of their shape, while that of neat PP continuously decreased with recycling numbers. 相似文献
3.
The miscibility and morphology of poly(ε-caprolactone) (PCl) and poly(para-chlorostyrene) (PpClS) blend were investigated by using thermal analysis, morphological analysis, viscometry, and the study of melting point depression. A single glass transition temperature was observed by differential scanning calorimetry (DSC) for PCl/PpClS blends in the whole compositional range (0/100, 25/75, 50/50, 62.5/37.5, 75/25, 90/10). Morphology of the polymers and their blends was studied by scanning electron microscopy (SEM). The Fourier transform infrared spectra of the samples were obtained by spectrometer. Up to 12 cm−1 shifts in carbonyl stretching band of PCl was detected in the spectra of PpClS rich blends. The viscosity of PCl, PpClS and their blends has also been studied to investigate the miscibility according the miscibility criteria Δb, and Δ[η]. Using this data, the interaction parameters α and μ, based on the Chee and Sun et al. approaches were determined. These criteria indicated that the blend is miscible in all proportions up to 90% of PCl content in the blends. The melting point depression of PCl in the blends was examined to obtain the interaction parameter, χ12 for this system. The parameter, χ12 was found to be composition dependent. Negative values of the obtained interaction parameter also support the miscibility of this system up to the 90% PCl in the blend. 相似文献
4.
A. Gonzlez-Montiel H. Keskkula D. R. Paul 《Journal of Polymer Science.Polymer Physics》1995,33(12):1751-1767
Transmission electron microscopy (TEM) was used to examine the morphology of blends of nylon 6 and polypropylene (PP) containing various maleated polypropylenes (PP-g-MA). The size of the dispersed polypropylene particles decreases as the content of maleic anhydride in the PP-g-MA increases for binary blends of nylon 6 and the maleated polypropylenes. Ternary blends of nylon 6, PP, and PP-g-MA show morphologies that depend on the content of maleic anhydride of the PP-g-MA and on the miscibility of PP and PP-g-MA. Blends where PP and PP-g-MA are immiscible show a bimodal distribution of particle sizes. Miscibility of the PP and PP-g-MA was determined by TEM using a special staining technique. Experimental observations of miscibility were further corroborated by thermodynamic calculations. The morphology of the ternary blends was also found to be dependent on the ratio of PP/PP-g-MA. By changing this ratio it was possible to induce drastic changes of morphology, going from a continuous nylon 6 phase to a continuous PP phase at a fixed composition. The mechanical properties of these blends were found to be dependent on their morphology. ©1995 John Wiley & Sons, Inc. 相似文献
5.
Xiaodong Xu Jinliang Qiao Jinghua Yin Ying Gao Xiaohong Zhang Yongtao Ding Yiqun Liu Zhirong Xin Jianming Gao Fan Huang Zhihai Song 《Journal of Polymer Science.Polymer Physics》2004,42(6):1042-1052
Binary CNBR/PP‐g‐GMA and ternary CNBR/PP/PP‐g‐GMA thermoplastic elastomers were prepared by reactive blending carboxy nitrile rubber (CNBR) powder with nanometer dimension and polypropylene functionalized with glycidyl methacrylate (PP‐g‐GMA). Morphology observation by using an atomic force microscope (AFM) and TEM revealed that the size of CNBR dispersed phase in CNBR/PP‐g‐GMA binary blends was much smaller than that of the corresponding CNBR/PP binary blends. Thermal behavior of CNBR/PP‐g‐GMA and CNBR/PP blends was studied by DSC. Comparing with the plain PP‐g‐GMA, Tc of PP‐g‐GMA in CNBR/PP‐g‐GMA blends increased about 10 °C. Both thermodynamic and kinetic effects would influence the crystallization behavior of PP‐g‐GMA in CNBR/PP‐g‐GMA blends. At a fixed content of CNBR, the apparent viscosity of the blending system increased with increasing the content of PP‐g‐GMA. FTIR spectrum verified that the improvement of miscibility of CNBR and PP‐g‐GMA was originated from the reaction between carboxy end groups of CNBR and epoxy groups of GMA grafted onto PP molecular chains. Comparing with CNBR/PP blends, the tensile strength, stress at 100% strain, and elongation at break of CNBR/PP‐g‐GMA blends were greatly improved. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1042–1052, 2004 相似文献
6.
The isothermal and non-isothermal crystallization kinetics of pure poly(ε−caprolactone) (PCL) and its blends with crosslinked tung oil were investigated as a function of composition, crystallization temperature, and heating rate using differential scanning calorimetric (DSC). The PCL/tung oil semi-interpenetrating polymer networks of different compositions were prepared via cationic polymerization of tung oil in the presence of homogenous solutions of PCL. This unique and relatively new in-situ polymerization and compatibilization blending technique created nano/micro-scale morphologies that cannot be obtained with the traditional melt-processing and/or solvent casting methods. Blends with different miscibility, phase behaviors, and morphologies (miscible, partially miscible, and immiscible) were observed as a function of composition with a constant concentration of boron trifluoride diethyl etherate (BFE) cationic initiator. The morphology of the semi-interpenetrating polymer networks was performed using scanning electron microscopy (SEM). Miscible blends with a single Tg for PCL ≤ 10 wt.%. were observed. While, on the other hand, partially miscible blends with two distinct Tgs and nanoscale morphologies and average particle sizes as small as 100 nm were observed for blends with 20 ≤ PCL wt.% ≤ 30. Immiscible blends with microscale highly interconnected, co-continuous two-phase morphology and two distinct Tgs were detected for 50 wt.% PCL. Both isothermal and non-isothermal crystallization kinetics were strongly influenced by the different miscibility and morphology of the blends. The isothermal and non-isothermal crystallization kinetics of PCL/tung oil blends were analyzed on the basis of Avrami and modified Avrami approaches, respectively. A substantial decrease in the isothermal (longer half time) and non-isothermal (Tm shifted to lower temperature) crystallization kinetics was observed as the concentration of PCL increased in the blends up to 30 wt.% due to the partially miscibility of the blends in this composition range. In a contrast, for 50 wt.% PCL blend, a considerable increase in the crystallization kinetics (isothermal and non-isothermal) was detected due to the highly interconnected, co-continuous two-phase morphology. 相似文献
7.
Polyamide 6/polypropylene (PA6/PP = 70/30 parts) blends containing 4 phr (parts per hundred resin) of organophilic modified montmorillonite (organoclay) were compatibilized with maleic anhydride-grafted ethylene-propylene rubber (EPRgMA). The blends were melt compounded in twin screw extruder followed by injection molding. The mechanical properties of PA6/PP nanocomposites were studied by tensile and flexural tests. The microstructure of the nanocomposite were assessed by scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray diffraction (XRD). The dynamic mechanical properties of the PA6/PP blend-based nanocomposites were analyzed by using a dynamic mechanical thermal analyzer (DMTA). The rheological properties were conducted from plate/plate rheometry via dynamic frequency sweep scans. The melt viscosity in a high shear rate region was performed by using a capillary rheometer. The strength and stiffness of the PA6/PP-based nanocomposites were improved significantly with the incorporation of EPRgMA. Adding EPRgMA to the PA6/PP blends resulted in a finer dispersion of the PP phase. TEM and XRD results revealed that the organoclay was dispersed more homogeneously in the presence of EPRgMA, however, mostly in the PA6 phase of the blends. DMTA results showed that EPRgMA worked as an effective compatibilizer. The storage (G′) and loss moduli (G″) assessed by plate/plate rheometry of PA6/PP blends increased with the incorporation of EPRgMA and organoclay. Furthermore, the apparent shear viscosity of the PA6/PP blend increased significantly for the EPRgMA compatibilized PA6/PP/organoclay nanocomposite. This was traced to the formation of an interphase between PA6 and PP (via PA6-g-EPR) and effective intercalation/exfoliation of the organoclay. 相似文献
8.
Luiz O. Faria Cezar Welter Roberto L. Moreira 《Journal of Polymer Science.Polymer Physics》2010,48(6):621-626
In this work, we report evidences of cocrystallization in ternary blends made of crystalline ferroelectric poly(vinylidene fluoride‐trifluorethylene) [P(VDF‐TrFE)] copolymers. Complete cocrystallization has been unequivocally demonstrated by the observation of just one Curie and one Melting temperature in their calorimetric thermograms. These temperatures were intermediary among the respective temperatures of the individual constituents, that is, P(VDF‐TrFE)72/28, P(VDF‐TrFE)63/37, and P(VDF‐TrFE)50/50. Dielectric and X ray diffraction data were used to complement the investigation. The binary blends made of 63/37 and 72/28 copolymers were found to be miscible in the entire range of composition, with the behavior of their Curie temperatures being well fitted by an equation very similar to that proposed by Gordon‐Taylor to describe the behavior of the glass transition temperatures in true binary blends. In the ternary crystalline system, we have found evidences that the complete miscibility of the binary blend made of 63/37 and 72/28 copolymers actually drives the P(VDF‐TrFE)50/50 copolymer to accommodate their chains in its binary crystalline structure. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 621–626, 2010 相似文献
9.
The molecular origin of the demixing behavior for 50: 50 (wt/wt) polyethylene/polypropylene (PE/PP) with different tacticity of PP at the melts (473 K) was investigated by Monte Carlo simulation of coarse-grained polymer model. Isotactic (iPP), atactic (aPP) and syndiotactic (sPP) polypropylenes were used for blending with PE. Coarse-graining polymer chains were represented by 50 beads, corresponding to C100H202 and C150H302 for PE and PP, respectively. The simulation was performed on a high coordination lattice incorporating short-range intramolecular interactions from the Rotational Isomeric State (RIS) model and long-range intermolecular interactions Lennard-Jones (LJ) potential function of ethane and propane units. Chain dimensions, the characteristic ratio (C n ) and self-diffusion coefficient (D) of PE in the blends are sensitive to the stereochemistry of PP chains. Compared with neat PE melts, PE dimension was relatively unchanged in PE/iPP and PE/aPP blends but slightly decreased in PE/sPP blends. PP dimension was increased in PE/iPP and PE/aPP mixture but decreased in PE/sPP blend in comparison with neat PP melts. In addition, diffusion of PE and PP chains in PE/PP mixture was decreased and increased, respectively, compared to the pure melts. Interchain pair correlation functions were used to detect the immiscibility of the blends. The tendency of demixing of PE/aPP and PE/iPP blends were weaker than that of PE/sPP blend. 相似文献
10.
The miscibility of polystyrene/brominated polystyrene blends (PS/PBrS) was investigated by using dilute-solution viscometry (DSV) method. The intrinsic viscosity and the viscometric parameters of this system have been determined at 20 ± 0.1 °C for prepared several PS/PBrS compositions (85/15, 75/25, 50/50, 25/75, 10/90). The binary systems were prepared in chloroform at five different concentrations; 0.15, 0.30, 0.60, 0.90, 1.20 g 100 ml−1. The miscibility criteria on the basis of the sign of Δ[η] m, Δb and Δb′, which are based on the difference between experimental and ideal values of [η]m, and bm were calculated by applying the Garcia et al., Catsiff-Hewett and Krigbaum-Wall theoretical equations. The thermodynamic parameter, α, modified thermodynamic parameter, β, and interaction parameter, μ, were also estimated. The data obtained from the viscometry studies showed that the examined blends were immiscible in all the compositions range besides the composition (10/90). The results from the DSV method are correlated with the miscibility data obtained for the same blend by differential scanning calorimetry (DSC) find. 相似文献
11.
Carbon black (CB)-filled immisicible thermoplastic/thermosetting polymer blends consisting of polypropylene (PP) and Novolac resin were reported in this paper. The PP/Novolac/CB blends with varied compositions and different processing sequences were prepared by melt-mixing method. The CB distribution, conductive mechanism and the relationship between morphology and electrical properties of the PP/Novolac/CB blends were investigated. Scanning electron microscopy (SEM), optical microscopy and extraction experiment results showed that in PP/Novolac blends CB particles preferentially localized in the Novolac phase, indicating CB has a good affinity with Novolac resin. The incorporation of CB changed the spherical particles of the dispersed Novolac phase into elongated structure. With increasing Novolac content, the elongation deformation of Novolac phase became more obvious and eventually the blends developed into co-continuous structure, which form double percolation and decrease the percolation threshold. When CB was initially blended with PP and followed by the addition of Novolac resin, the partial migration of CB from PP to the Novolac phase was possibly occurred. The addition of Novolac to PP evidently increases the storage modulus G′, loss modulus G″ and complex viscosity η∗. The addition of CB to PP/Novolac blends further increase η∗, and it increases with increasing CB loading, which was related to the change of composite morphology. 相似文献
12.
Katarzyna Lewandowska 《European Polymer Journal》2005,41(1):55-64
Poly(vinyl alcohol) (PVA) (polymer A) and poly(N-vinylpyrrolidone) (PVP) (polymer B) are known to form a thermodynamically miscible pair. In the present study the conclusion on miscibility of PVA/PVP solid blends, confirmed qualitatively (DMTA, FTIR) and quantitatively (DSC, χAB = − 0.69 at 503 K) is compared with the miscibility investigations of PVA/PVP solution blends by the technique of dilute solution viscometry. The miscibility of the ternary (polymer A/ polymer B/ solvent) system is estimated on the basis of experimental and ideal values of the viscosity parameters k, b and [η]. It is found that the conclusions on miscibility or nonmiscibility drawn from viscosity measurements in dilute solution blends depend: (i) on the applied extrapolation method used for the determination of the viscosity interaction parameters, (ii) on the assumed definition of the ideal values and (iii) on the thermodynamic quality of the solvent, which in the case of PVA depends on its degree of hydrolysis. Hence, viscometric investigations of dilute PVA/PVP solution blends have revealed that viscometry, widely used in the literature for estimation of polymer-polymer miscibility can not be recommended as a sole method to presume the miscibility of a polymer pair. 相似文献
13.
Miscibility of blends composed by a linear unsaturated polyester (LUP) with poly(ε-caprolactone) (PCL) of different molecular weights (Mw = 50 × 103, 18 × 103 and 2 × 103) has been studied. The blends were subjected to different thermal treatments and have been studied by FT-IR spectroscopy, differential scanning calorimetry (DSC) and scanning electronic microscopy (ESEM). FT-IR results allow proving the miscibility of the blends at temperatures above the melting temperature of neat PCL. DSC measurements confirm the existence of a crystalline phase corresponding to neat PCL. The crystallization of PCL is observed in a wide range of blends composition, being detected in all the blend compositions when the crystallization time increases. Thermograms show clearly the glass transition temperatures of samples that have been rapidly quenched from the melt. However, the change in the heat flow corresponding to the glass transition temperatures is difficult to detect in samples with high PCL crystallization degree. The analysis of the results indicates that the morphology of the amorphous phase is heterogeneous for LUP + PCL blends and changes depending on the thermal treatment. The ESEM measurements, confirm the heterogeneity of the amorphous phase. The decrease of the molecular weight of the PCL favours the miscibility of the blends. 相似文献
14.
By using supercritical carbon dioxide (sc‐CO2) as the physical foaming agent, microcellular foaming was carried out in a batch process from a wide range of immiscible polypropylene/polystyrene (PP/PS) blends with 10–70 wt% PS. The blends were prepared via melt processing in a twin‐screw extruder. The cell structure, cell size, and cell density of foamed PP/PS blends were investigated and explained by combining the blend phase morphology and morphological parameters with the foaming principle. It was demonstrated that all PP/PS blends exhibit much dramatically improved foamability than the PP, and significantly decreased cell size and obviously increased cell density than the PS. Moreover, the cell structure can be tunable via changing the blend composition. Foamed PP/PS blends with up to 30 wt% PS exhibit a closed‐cell structure. Among them, foamed PP/PS 90:10 and 80:20 blends have very small mean cell diameter (0.4 and 0.7 µm) and high cell density (8.3 × 1011 and 6.4 × 1011 cells/cm3). Both of blends exhibit nonuniform cell structure, in which most of small cells spread as “a string of beads.” Foamed PP/PS 70:30 blend shows the most uniform cell structure. Increase in the PS content to 50 wt% and especially 70 wt% transforms it to an irregular open‐cell structure. The cell structure of foamed PP/PS blends is strongly related to the blend phase morphology and the solubility of CO2 in PP more than that in PS, which makes the PP serve as a CO2 reservoir. Copyright © 2009 John Wiley & Sons, Ltd. 相似文献
15.
Miscibility in blends of three styrene-butadiene-styrene and one styrene-isoprene-styrene triblock copolymers containing 28%, 30%, 48%, and 14% by weight of polystyrene, respectively, with poly(vinyl methyl ether) (PVME) were investigated by FTIR spectroscopy and differential scanning calorimetry (DSC). It was found from the optical clarity and the glass transition temperature behavior that the blends show miscibility for each kind of triblock copolymers below a certain concentration of PVME. The concentration range to show miscibility becomes wider as the polystyrene content and molecular weight of PS segment in the triblock copolymers increase. From the FTIR results, the relative peak intensity of the 1100 cm-1 region due to COCH3 band of PVME and peak position of 698 cm-1 region due to phenyl ring are sensitive to the miscibility of SBS(SIS)/PVME blends. The results show that the miscibility in SBS(SIS)/PVME blends is greatly affected by the composition of the copolymers and the polystyrene content in the triblock copolymers. Molecular weights of polystyrene segments have also affected the miscibility of the blends. ©1995 John Wiley & Sons, Inc. 相似文献
16.
Crystallization behaviour of blends of poly(N-methyldodecano-12-lactam) (PMDL) with statistical copolymer poly(styrene-stat-acrylic acid) (PSAA) has been studied by the DSC and WAXD methods. The blend films prepared from dioxane solutions were crystallized at laboratory temperature for five days. Approximate crystallinities of as-prepared neat lower- PMDL 5 and higher-molecular weight PMDL 45 were 28% and 19%, respectively. With increasing PSAA content in the blends the crystallinities decreased sharply. The melting point of the primary crystalline structure of PMDL showed a decreasing dependence on PSAA content in the blends, confirming miscibility of the PMDL-PSAA pair. Recrystallization was strongly suppressed in the blends. The lower-melting endotherm appearing at about 10-15 °C above the crystallization temperature was attributed to melting to less perfect structures formed during secondary crystallization. In neat PMDL, the extent of secondary crystallization was approximately 5-10%. In the blends containing 20% PSAA approximate relative proportion of secondary crystallites on total crystallinity was 40% and 60% for the blends with PMDL 5 and PMDL 45, respectively. WAXD measurements did not reveal any change in crystal modification on blending. Increased Tg in blends of flexible PMDL cannot play a significant role in suppression of primary in favour of secondary crystallization. This was attributed to low mobility of PMDL chains due to dilution effect and specific interactions with the amorphous copolymer component, and, in case of the higher-molecular-weight PMDL, a greater involvement of entanglements. Higher Tg of blends was involved in retardation of non-isothermal crystallization on cooling and subsequent cold crystallization. 相似文献
17.
Dong-Pil Kang Chang-Sik Ha Won-Jei Cho 《Journal of polymer science. Part A, Polymer chemistry》1989,27(4):1401-1413
The FT–IR spectroscopic analysis and the thermal behavior of the blends of styrene-1-vinyl naphthalene copolymers [P(S-co-1VN)] and poly(vinyl methyl ether) (PVME) were investigated in this work. The copolymers containing 23, 50, and 80% by weight of styrene were synthesized by radical polymerization. The blend films of the P(S-co-1VN) and PVME were cast from the mixed solvent of benzene/trimethylbenzene [50/50 (v/v)]. It was found from the optical clarity and the glass transition temperature behavior that the blends of PVME with P(S-co-1VN) of 80 wt % styrene and 20 wt % 1-vinylnaphthalene (1VN) show miscibility below 50 wt % of the copolymer concentration and the concentration range to show miscibility becomes wider as the composition of 1VN decreases in the copolymers. From the FT–IR results, the relative peak intensity of the 1100 cm?1 region due to COCH3 bond of PVME and the peak position of 774 cm?1 region due to the naphthyl ring of 1VN were sensitive to the miscibility of the P(S-co-1VN)/PVME blends. The frequency differences of the phenyl ring and the naphthyl ring in the P(S-co-1VN) from each frequency in the P(S-co-1VN)/PVME blends increase with increasing composition of styrene in the copolymers and with increasing concentration of PVME in the blends. A threshold energy exists to induce molecular interaction between the naphthyl ring of 1VN and the COCH3 of PVME and to result in the miscible blends, regardless of the copolymer composition as well as the blend concentration. The threshold energy was estimated as about 3.689 × 10?21 cal (779 cm?1) for the P(S-co-1VN)/PVME blend system. It can be concluded that the miscibility in P(S-co-1VN)/PVME blends is largely affected by the composition of the copolymers, and the blends become more miscible as the composition of styrene in the copolymers increases. 相似文献
18.
Lin Zhu Xia Yun Xiangqian Shen Weixiang Ding Haozhu Zhao Xinhua Xu 《Colloid and polymer science》2013,291(7):1669-1676
The influence of quiescent molten-state annealing process on the phase structure and morphology of poly(propylene)/poly(ethylene-co-octene) blends with co-continuous morphology was studied using scanning electron microscopy (SEM). The structure parameter called characteristic length (L) was calculated by the pattern analysis of SEM micrographs to describe morphological variation with annealing time during molten-state annealing process under quiescent condition. Moreover, the potential fractal behavior of the phase structure and morphology of PP/PEOc?=?50/50 blend during the process were discussed. The histograms of P(L/L m ) obtained at various annealing time fell on a master curve, demonstrating the self-similar growth of the phase structure of the blends during quiescent molten-state annealing process. 相似文献
19.
Nicole N. Pellegrini Russell J. Composto Karen I. Winey 《Journal of Polymer Science.Polymer Physics》2000,38(11):1547-1552
We tested forward recoil spectrometry (FRES) as a method to determine miscibility by measuring coexistence compositions in binary polymer blends. In this study, equilibrium phase compositions were determined for a compositionally symmetric poly(styrene‐ran‐methyl methacrylate) random copolymer (S0.49‐r‐MMA) and two homopolymers, deuterated polystyrene (dPS) and deuterated poly(methyl methacrylate) (dPMMA). Sample preparation, film dewetting, and beam damage were addressed, and the results for these polymer blends were in good agreement with those obtained through other experimental techniques. Deuteration had a strong effect on the miscibility of the dPS/S0.49‐r‐MMA and dPMMA/S0.49‐r‐MMA blends, to the extent that the asymmetric miscibility observed separately for the PS/S0.49‐r‐MMA and PMMA/S0.49‐r‐MMA blends was not found. Although this deuteration effect may limit the applicability of FRES for some polymer systems, the accuracy with which phase compositions can be determined with FRES makes it an attractive alternative to other less quantitative methods for investigating blend miscibility. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1547–1552, 2000 相似文献
20.
Dimitrios N. Bikiaris George Z. Papageorgiou Eleni Pavlidou 《European Polymer Journal》2007,43(6):2491-2503
In the present study the miscibility behaviour and the biodegradability of poly(ε-caprolactone)/poly(propylene succinate) (PCL/PPSu) blends were investigated. Both of these aliphatic polyesters were laboratory synthesized. For the polymer characterization DSC, 1H NMR, WAXD and molecular weight measurements were performed. Blends of the polymers with compositions 90/10, 80/20, 70/30 and 60/40 w/w were prepared by solution-casting. DSC analysis of the prepared blends indicated only a very limited miscibility in the melt phase since the polymer-polymer interaction parameter χ12 was −0.11. In the case of crystallized specimens two distinct phases existed in all studied compositions as it was found by SEM micrographs and the particle size distribution of PPSu dispersed phase increased with increasing PPSu content. Enzymatic hydrolysis for several days of the prepared blends was performed using Rhizopus delemar lipase at pH 7.2 and 30 °C. SEM micrographs of thin film surfaces revealed that hydrolysis affected mainly the PPSu polymer as well as the amorphous phase of PCL. For all polymer blends an increase of the melting temperatures and the heat of fusions was recorded after the hydrolysis. The biodegradation rates as expressed in terms of weight loss were faster for the blends with higher PPSu content. Finally, a simple theoretical kinetic model was developed to describe the enzymatic hydrolysis of the blends and the Michaelis-Menten parameters were estimated. 相似文献