Free radical copolymerization of methyl substituted stilbenes with maleic anhydride

Stilbene-maleic anhydride is a well-known donor-acceptor comonomer pair which undergoes free radical copolymerization to form an alternating copolymer. A series of methyl substituted stilbenes were synthesized and copolymerized with maleic anhydride. A conversion versus time study was undertaken to understand the methyl substituent effect on copolymerization rates. Methyl substituents on the phenyl ring of stilbene can change the reactivity of stilbene by changing the resonance stability of the propagating radical and steric hindrance in the propagation step and thereby change the copolymerization rate. Methyl substituted stilbene-maleic anhydride copolymers were determined by quantitative ¹³C 1D NMR to be alternating copolymers. Size exclusion chromatography (SEC) measurements showed that the weight-average molecular weights of these copolymers varied from 3000 to over 1,000,000 g/mol. Interchain aggregation was observed in poly((E)-4-methylstilbene-alt-maleic anhydride) by dynamic light scattering (DLS). The SEC trace for poly((E)-4-methylstilbene-alt-maleic anhydride) exhibited bimodal peaks. No glass transition temperature or crystalline melting temperature was observed between 0 °C and 250 °C by differential scanning calorimetry (DSC). Thermogravimetric analysis (TGA) showed that these polymers have 5% weight loss around 290 °C.     

Synthesis, characterization and degradability of the comb-type poly(4-hydroxyl-ε-caprolactone-co-ε-caprolactone)-g-poly(l-lactide)

The novel comb-type biodegradable graft copolymers based on ε-caprolactone and l-lactide were synthesized. Firstly, 2-oxepane-1,5-dione (OPD) was synthesized by the Baeyer-Villiger oxidation of 1,4-cyclohexanedione, and was subsequently copolymerized with ε-caprolactone (CL) to produce poly(2-oxepane-1,5-dione-co-ε-caprolactone) (POCL) catalyzed by stannous(II) 2-ethylhexanoate in toluene. Then, POCL was converted into poly(4-hydroxyl-ε-caprolactone-co-ε-caprolactone) (PHCL) using sodium borohydride as reductant. Finally, poly(4-hydroxyl-ε-caprolactone-co-ε-caprolactone)-g-poly(l-lactide) (PHCL-g-PLLA) were prepared successfully by bulk ring-opening polymerization of l-lactide using PHCL as a macro-initiator. All the copolymers have been characterized by ¹H and ¹³C NMR, DSC, and GPC. Compared with the random copolymer of poly(CL-co-LA), the elongation is highly increased. And the thermal analysis showed that the crystallization rate of the PCL backbone in the graft copolymers was greatly reduced compared to the PCL homopolymer. The hydrolytic degradation of the copolymer was much faster in a phosphate buffer (pH = 7.4) at 37 °C, which is confirmed by the weight loss and change of intrinsic viscosity.     

Study of amphiphilic poly(1-dodecene-co-para-methylstyrene)-graft-poly(ethylene glycol). Part II: Preparation and micellization behavior of the amphiphilic copolymers

Poly(1-dodecene-co-pMS) copolymers were brominated by HBr/H₂O₂ system with high selectivity at the methyl groups of pMS units. It was found that longer reaction time, higher pMS content, and lower molecular weight of the copolymers were helpful for higher degree of bromination. Through a modified Williamson ether synthesis, poly(ethylene glycol) monomethyl ethers (PEG) were grafted onto the brominated copolymers, and the amphiphilic poly(1-dodecene-co-pMS)-graft-PEG copolymers which can be readily dissolved in n-octane were successfully synthesized. Due to their amphiphilic characteristics, they can self-assemble spontaneously into reverse micelles in n-octane. Their micellization behaviors were investigated by fluorescence probe technique, transmission electron microscopy (TEM), and dynamic light scattering (DLS). The critical micelle concentrations of the three copolymers in n-octane were determined at about 1.26 × 10⁻⁴, 1.58 × 10⁻⁴, and 1.95 × 10⁻⁴ g ml⁻¹ by fluorescence measurements. The morphologies of micelles were preliminarily explored by TEM and were found to be spheres.     

Organostibine mediated controlled/living random copolymerization of styrene and methyl methacrylate

The first example of organostibine mediated controlled/living random copolymerization of styrene (St) and methyl methacrylate (MMA) was achieved by heating a solution of St/MMA/organostibine mediator at 100 °C or St/MMA/organostibine mediator/AIBN with various monomer feed ratios at 60 °C. The addition of AIBN significantly decreased the reaction temperature and enhanced the rate of copolymerization. The structure of poly(St-co-MMA) was verified by ¹H NMR. The reactivity ratios at 60 °C were determined by the extended Kelen-Tüd?s method to be γ_St = 0.40 and γ_MMA = 0.44. The ln([M]₀/[M]) increased linearly with increasing reaction time. The number-average molecular weights of poly(St-co-MMA) increased linearly with conversion. Poly(St-co-MMA) with expected number-average molecular weight and low polydispersity index was formed. The living characteristic was further confirmed by chain-extension of poly(St-co-MMA) to form poly(St-co-MMA)-b-PMMA.     

Blends as a strategy towards tailored hydrolytic degradation of poly(?-caprolactone-co-d,l-lactide)-poly(ethylene glycol)-poly(?-caprolactone-co-d,l-lactide) co-polymers

Binary blends were prepared from poly(?-caprolactone) (PCL), and P(CL-co-d,l-lactic acid)-P(ethylene glycol)-P(CL-co-d,l-lactic acid) co-polymers, where the d,l-LA content in the side chains varied from 0 to 70 mol%. Blend discs were fabricated by melt-molding, and the effect of blend composition on hydrolytic degradation was studied. Variations in medium pH were monitored, and morphological changes were observed using scanning electron microscopy. Blending of these co-polymers was found to constitute a simple means by which intermediate rates of water absorption and mass loss were obtained, compared to those observed in pure co-polymer preparations. In one of the blends, prepared from the two components containing 70 or 0 mol% d,l-LA in the side chains and thereby exhibiting large differences in degradation rate, hydrolysis resulted in the formation of a porous material over time. Furthermore, all blend samples maintained their initial shape throughout the study. Such materials may be interesting for further investigations for applications in cellular therapy and controlled release.     

A novel strategy for synthesis of amphiphilic π-shaped copolymers by RAFT polymerization

The amphiphilic π-shaped copolymers with narrow molecular weight distribution (M_w/M_n = 1.04-1.09) based on polystyrene (PSt) and poly(ethylene glycol) have been synthesized successfully. The reversible addition-fragmentation transfer (RAFT) polymerization of St in the presence of dibenzyl trithiocarbonate and N,N′-azobis(isobutyronitrile) (AIBN) yielded macro RAFT agent PSt-SC(S)S-PSt, subsequent reaction with excess maleic anhydride (MAh) at 80 °C in tetrahydrofuran afforded the PSt-MAh-SC(S)S-MAh-PSt. It was used as RAFT agent in the RAFT polymerization of St, and finally the amphiphilic π-shaped copolymers were obtained by the reaction of MAh with hydroxyl-terminated poly(ethylene glycol methyl ether) at 90 °C for 48 h. Their structures were confirmed by FT-IR and ¹H NMR spectra, and their molecular weight and molecular weight distribution were measured by gel permeation chromatography.     

Radical copolymerization of 2,2,2-trifluoroethyl methacrylate with cyano compounds for dielectric materials: Synthesis and characterization

The copolymerization of cyano (nitrile) monomers and a fluoroalkylmethacrylate is used to develop new dielectric polymers containing C-CN and C-F substituents. Methacrylonitrile (MAN), acrylonitrile (AN) and methylvinylidene cyanide (MVCN) were chosen as cyano monomers. 2,2,2-Trifluoroethyl methacrylate (MATRIF) was used as a fluorinated comonomer. The copolymers based on cyano monomers such as AN, MAN or MVCN, and MATRIF comonomers were synthesized by radical process initiated by AIBN. The yields of the copolymerizations were ranging between 40 and 60%. These copolymers were characterized by ¹H, ¹³C, ¹⁹F NMR and IR spectroscopy which showed that the percentages of incorporation of AN and MAN in the copolymers were 45%. However, only 5% of MVCN was incorporated into poly(MVCN-co-MATRIF) copolymer. Thermogravimetric analyses showed that the thermal decomposition occurred from 200, 230 or 240 °C for copolymers of MVCN, MAN or AN, respectively, and indicated that the process of degradation depends on the nature of cyano monomer.     

Radical copolymerization of vinylidene fluoride with perfluoroalkylvinyl ethers

The radical copolymerization of perfluoromethylvinyl ether (PMVE) and perfluoropropylvinyl ether (PPVE) with vinylidene fluoride (VDF), initiated by tertiobutyl peroxypivalate (TBPPI) and ditertiobutyl peroxide (DTBP), respectively, are presented. The kinetics of copolymerization were investigated for each monomer from series of at least eight reactions for which the initial [VDF]₀/[fluorinated vinyl ether]₀ molar ratios ranged between 20/80 and 80/20. The copolymer compositions of these random-type copolymers were calculated by means of ¹⁹F NMR spectroscopy and allowed one to quantify the respective amounts of each monomeric unit in the copolymer. According to the Tidwell and Mortimer method, the reactivity ratios (r_i) of both comonomers for each type of copolymerization were obtained : r_VDF = 3.40 ± 0.40 and r_PMVE = 0 at 74 °C; and r_VDF = 1.15 ± 0.36 and r_PPVE = 0 at 120 °C. Moreover, the glass transition temperatures (T_g’s) of poly(VDF-co-PMVE) and poly(VDF-co-PPVE) copolymers containing different amounts of VDF and PMVE or PPVE, were determined and the theoretical glass transition temperatures of poly(PMVE) and poly(PPVE) homopolymer were deduced.     

Synthesis, characterization and degradability of the novel aliphatic polyester bearing pendant N-isopropylamide functional groups

The synthesis, characterization, and degradability of the novel aliphatic polyester bearing pendant N-isopropylamide functional group are reported for the first time. 2-(N-Isopropyl-2-carbamoylethyl)cyclohexanone (CCH) was first synthesized by the Michael reaction of N-isopropylacrylamide with cyclohexanone and was subsequently converted into 6-(N-isopropyl-2-carbamoylethyl)-?-caprolactone (CCL) by the Baeyer-Villiger oxidation reaction using 3-chloroperoxybenzoic acid (mCPBA) as the oxidant. Finally, the novel functionalized poly(?-caprolactone) bearing the pendant N-isopropylamide functional groups, poly(6-(N-isopropyl-2-carbamoylethyl)-?-caprolactone-co-?-caprolactone)s (poly(CCL-co-CL)), were carried out successfully by bulk ring-opening polymerization of CCL and ?-CL initiated by Sn(Oct)₂. Poly(CCL-co-CL) were characterized by ¹H NMR, ¹³C NMR, SEC and DSC. The copolymer containing 9.1 mol% CCL formed flexible films and was used to study its degradability. A phosphate buffer (pH = 7.4) with temperature 37 °C was adopted to proceed the degrading study all through. Compared with poly(?-caprolactone), the hydrolytic degradation of poly(CCL-co-CL) was much faster, which is confirmed by the weight loss and change of intrinsic viscosity.     

Synthesis and characterization of poly(3,3 bis(azidomethyl)oxetane‐co‐ε‐caprolactone)s

The quasi‐living cationic copolymerization of 3,3‐bis(chloromethyl)oxetane (BCMO) and ε‐caprolactone (ε‐CL), using boron trifluoride etherate as catalyst and 1,4‐butanediol as coinitiator, was investigated in methylene chloride at 0°C. The resulting hydroxyl‐ended copolymers exhibit a narrow molecular weight polydispersity and a functionality of about 2. The reactivity ratios of BCMO (0.26) and ε‐CL (0.47), and the T_g of the copolymers, indicate their statistical character. The synthesis of poly(3,3‐bis(azidomethyl)oxetane‐co‐ε‐caprolactone) from poly(BCMO‐co‐ε‐CL) via the substitution of the chlorine atoms by azide groups, using sodium azide in DMSO at 110°C, occurs without any degradation, but the copolymers decompose at about 240°C. All polymers were characterized by vapor pressure osmometry or steric exclusion chromatography, ¹H‐NMR and FTIR spectroscopies, and DSC. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1027–1039, 1999     

New fluorinated polymers bearing pendant phosphonic groups for fuel cell membranes: Part 1 synthesis and characterizations of the fluorinated polymeric backbone

Radical copolymerizations of chlorotrifluoroethylene (CTFE) with vinyl ethers such as 2-chloroethyl vinyl ether (CEVE) and ethyl vinyl ether (EVE) were performed at 75 °C in the presence of peroxide initiator. Three copolymers were obtained and characterized by means of both NMR and elemental analysis. Then, the chlorine atoms in the side chains were converted into iodine atoms by nucleophilic substitution, which was monitored by ¹H NMR spectroscopy. A series of five copolymers with different amounts of iodine atoms in the side chains were thus obtained. These copolymers exhibited molecular weight values of about 25,000 g mol⁻¹, and the thermal analysis of the copolymers showed a starting degradation from about 220 °C. The T_g values were in the range of 34-41 °C and showed a linear dependence versus the content of iodine atoms.     

pH-labile sheddable block copolymers by RAFT polymerization: Synthesis and potential use as siRNA conjugates

Well-defined amphiphilic block copolymers composed of hydrophilic and hydrophobic blocks linked through an acid-labile acetal bond were synthesized directly by RAFT polymerization using a new poly(ethylene glycol) (PEG) macroRAFT agent modified with an acid-labile group at its R-terminal. The new macroRAFT agent was used for polymerization of poly(t-butyl methacrylate) (PtBMA) or poly(cholesterol-methacrylate) (PCMA) to synthesize well-defined block copolymers with a PEG block sheddable under acidic conditions. The chain extension polymerization kinetics showed known traits of RAFT polymerization. The molecular weight distributions of the copolymers prepared using the new macroRAFT agent remained below 1.2 during the polymerizations and the molecular weight of the copolymers was linearly proportional to monomer conversions. The acid-catalyzed hydrolysis behavior of the PEG-macroRAFT agent and the PEG-b-PtBMA (Mn = 13,600 by GPC, PDI = 1.10) was studied by GPC, ¹H NMR and UV–vis spectroscopy. The half-life of acid-hydrolysis was 70 min at pH 2.2 and 92 h at pH 4.0. The potential use of the pH-labile shedding behavior of the copolymers was demonstrated by conjugating a thiol-modified siRNA to ω-pyridyldisulfide modified PEG-b-PCMA. The resultant PEG-b-PCMA-b-siRNA triblock modular polymer released PCMA-b-siRNA segment in acidic and siRNA segment in reductive conditions, as confirmed by polyacrylamide gel electrophoresis.     

Study of amphiphilic poly(1-dodecene-co-para-methylstyrene)-graft-poly (ethylene glycol): Part I. Preparation of poly(1-dodecene-co-para-methylstyrene) copolymer and its molecular weight regulation

Poly(1-dodecene-co-para-methylstyrene) copolymers with a broad composition range were prepared by an MgCl₂ supported TiCl₄ catalyst. The effects of temperature and hydrogen on catalyst activity were investigated. It was found that catalyst activity reached a maximum at around 60 °C, and then decreased with the rising temperature. Hydrogen showed an activation effect on the Ziegler-Natta catalyst. ¹H NMR and ¹³C NMR spectra showed that para-methylstyrene (pMS) could be effectively and randomly incorporated into the copolymer chains. The single glass transition indicated there was no block sequence in the copolymer. The copolymerization reaction was examined by the reactivity ratios of comonomers and the relatively low reactivity ratios of 1-dodecene and pMS indicated that both of them had little tendency of consecutive insertion and should be homogeneously distributed in the copolymer chains. Furthermore, the molecular weights of copolymers were regulated by chain transfer agents (diethyl zinc and hydrogen) and temperature. The molecular weights reduced greatly with the addition of diethyl zinc and hydrogen and with the increasing temperature.     

Synthesis of poly(methyl methacrylate-co-styrene)-block-polysulfide-block-poly(methyl methacrylate-co-styrene) copolymers by free radical polymerization combined with oxidative coupling

Poly(methyl methacrylate-co-styrene)-block-polysulfide-block-poly(methyl methacrylate-co-styrene) triblock copolymers were synthesized for the first time by the free radical copolymerization of methyl methacrylate (MMA) and styrene (St) in the presence of a thiocol oligomer as a chain transfer agent, followed by chemical oxidation of the remaining SH-end groups. The apparent chain transfer constant of the thiocol SH groups in the copolymerization reaction was estimated from the rate of consumption of the thiol groups versus the overall rate of consumption of the monomers (C_T = 1.28). Based on this value, the chain transfer constant of the thiocol SH groups in St polymerization was calculated . The triblock copolymers synthesized were characterized by SEC and ¹H NMR measurements.     

Novel fluoroacrylated copolymers: synthesis, characterization and properties

The development of polymer waveguides leads to synthesis of fluorinated amorphous polymers with high transmission capacity, potential to tune their optical properties by tailoring the molecular structure, together with good processability, easy handling, good flexibility and low cost.In this work we have investigated new thermoplastic fluoroacrylated copolymers, synthesized by radical copolymerization of fluoroalkene(s) with five-membered cyclic carbonate and a third monomer or transfer agent, both containing OH group susceptible to be used for grafting of photocrosslinkable groups. The reaction of hydroxy functionalized copolymers with different acrylating agents results in fluoroacrylated resins with molecular weight in the range of 2000-3000 g mol⁻¹, yield >75% and good solubility in reactive diluents. In the presence of photoinitiator(s), they were crosslinked under UV-radiation in order to obtain optical waveguides.The copolymers synthesized were characterized by ¹H, ¹⁹F and ¹³C NMR as well as FT-IR spectroscopies and have good thermal stability (T_d > 200 °C). The refractive indeces of hydroxy functionalized fluorooligomers and acrylated resins were found to range from 1.44 to 1.45 at 23 °C and the T_gs (by DSC) varied from 40 to 110 °C depending on the content of the cyclic monomer. The optical characteristics of these thermoplastic fluoroacrylated copolymers are under progress.     

Synthesis of novel multi-arm star azobenzene side-chain liquid crystalline copolymers with a hyperbranched core

A series of novel multi-arm star side-chain liquid crystalline (LC) copolymers with hyperbranched core moieties were synthesized by atom transfer radical polymerization (ATRP) using a multi-functional hyperbranched polyether as the initiator and chlorobenzene as the solvent. The multi-functional hyperbranched polyether initiator was prepared from poly(3-ethyl-3-(hydroxymethyl)oxetane) (PEHO) and 2-bromo-2-methylpropionyl bromide. The azobenzene side-chain liquid crystalline arms were designed to have an LC conformation of poly[6-(4-methoxy-4^′-oxy-azobenzene)hexyl methacrylate] with different molecular weights. Their characterization was performed with ¹H NMR, size exclusion chromatograph (SEC), differential scanning calorimetry (DSC) and thermal polarized optical microscopy (POM). The multi-arm star side-chain liquid crystalline copolymers exhibited a smectic and a nematic phase, and the phase transition temperatures from the smectic to the nematic phase and from the nematic to isotropic phase increased with increasing the molecular weight of the multi-arm star side-chain liquid crystalline copolymers from 1.78 × 10⁴ to 9.07 × 10⁴.     

Poly(methylmethacrylate-dimethylsiloxane) triblock copolymers synthesized by transition metal mediated living radical polymerization: bulk and surface characterization

Well-defined poly(MMA-b-DMS-b-MMA) triblock copolymers were prepared by copper(I) mediated living radical polymerization. This was achieved by polymerization of methylmethacrylate (MMA) with different concentrations of 2-bromoisobutyrate terminated polydimethylsiloxane (PDMS). The polymerization occurred in controlled manner with the molecular weight found by ¹H NMR close to that predicted and a narrow molecular weight distribution (M_w/M_n∼1.2). Copolymers were obtained with M_n=2100, 4900, 10 100 and 29 500 g mol⁻¹ respectively with poly(MMA) (PMMA) terminal blocks and a central PDMS block of 5500 g mol⁻¹ in each case.DSC analysis showed most of the poly(MMA-b-DMS-b-MMA) triblock copolymers exhibits two T_g’s, one at low temperature corresponding to the T_g of PDMS microphase and a second at high temperature corresponding to the T_g of the PMMA microphase. TEM images show microphase segregation morphology in bulk for the triblock copolymers, with a higher degree of segregation for copolymers containing higher PDMS content. XPS measurements were performed to determine the chemical composition at the surface. For all the copolymers PDMS enrichment is observed at the surface. Copolymers containing higher percentage of PDMS exhibit higher phase separation and better enrichment of PDMS at the surface. The surface tension determined by contact angle measurements of the copolymer film containing 59 mol% of PDMS was 19.15 mN m⁻¹.     

Synthesis and Characterization of Novel Aliphatic Poly(carbonate‐ester)s with Functional Pendent Groups

Summary: A novel cyclic carbonate monomer 5‐methyl‐5‐(succinimide‐N‐oxycarbonyl)‐1,3‐dioxan‐2‐one (MSTC) was prepared. The copolymers of MSTC with caprolactone (CL) were further synthesized by ring‐opening copolymerization. The copolymers with amido‐amine pendent groups were obtained by aminolysis of poly(MSTC‐co‐CL) with ethylenediamine. These copolymers were characterized by IR, ¹H NMR, ¹³C NMR spectroscopies and GPC. The hydrophilicity and degradability of the copolymers with amido‐amine pendent groups were greatly improved in comparison with the PCL homopolymer.

Hydrophilicity of PCL (1), poly(MATC‐co‐CL) (16.5:83.5) (2), and poly(MATC‐co‐CL) (29.5:70.5) (3).     

Amphiphilic Biodegradable Poly(ϵ-caprolactone)-Poly(ethylene glycol) – Poly(ϵ-caprolactone) Triblock Copolymer Synthesis by Maghnite-H+ as a Green Catalyst

Amphiphilic biodegradable (PCL-PEG-PCL) triblock copolymers have been successfully prepared by the ring opening polymerization of ?-caprolactone (CL) in the presence of poly(ethylene glycol) (PEG) at 80°C employing Maghnite-H⁺ a non-toxic Montmorillonite clay as catalyst. Maghnite-H⁺ reacts as a solid source of protons to induce ?-caprolactone polymerization. The triblock architecture, molecular weight and thermal properties of the copolymers were characterized by NMR spectra, GPC and DSC analyses. The effect of Maghnite-H⁺ proportion and PEGs on the rate of copolymerization and on average molecular weight of resulting copolymers was studied. A cationic mechanism for the copolymerization reaction was proposed.     

Homopolymer and copolymers of 4-nitro-3-methylphenyl methacrylate with glycidyl methacrylate: Synthesis, characterization, monomer reactivity ratios and thermal properties

The novel methacrylic monomer, 4-nitro-3-methylphenyl methacrylate (NMPM) was synthesized by reacting 4-nitro-3-methylphenol dissolved in ethyl methyl ketone (EMK) with methacryloyl chloride in the presence of triethylamine as a catalyst. The homopolymer and copolymers of NMPM with glycidyl methacrylate having different compositions were synthesized by free radical polymerization in EMK solution at 70 ± 1 °C using benzoyl peroxide as free radical initiator. The homopolymer and the copolymers were characterized by FT-IR, ¹H NMR and ¹³C NMR spectroscopic techniques. The solubility tests were tested in various polar and non-polar solvents. The molecular weight and polydispersity indices of the copolymers were determined using gel permeation chromatography. The glass transition temperature of the copolymers increases with increase in NMPM content. The thermogravimetric analysis of the polymers performed in air showed that the thermal stability of the copolymer increases with NMPM content. The copolymer composition was determined using ¹H NMR spectra. The monomer reactivity ratios were determined by the application of conventional linearization methods such Fineman-Ross (r₁ = 1.862, r₂ = 0.881), Kelen-Tudos (r₁ = 1.712, r₂ = 0.893) and extended Kelen-Tudos methods (r₁ = 1.889, r₂ = 0.884).