Synthesis of pyrrolo[3,2-b]benzofurans and pyrrolo[3,2-b]naphthofurans via addition of a silyloxypyrrole to activated quinones

The uncatalyzed reaction of N-(tert-butoxycarbonyl)-2-tert-butyldimethylsilyloxypyrrole 3 with 1,4-quinones bearing an electron withdrawing group at C-2 has been studied. Use of 1,4-quinones 4, 5 bearing an ester group at C-2 provided an efficient synthesis of the respective pyrrolidinobenzofuran adduct 9 or pyrrolidinonaphthofuran adduct 10 whereas use of 1,4-quinones 6, 7 and 8 bearing an acetyl group at C-2 afforded silyloxypyrroles 11, 12 and 13 resulting from direct electrophilic substitution of the silyloxypyrrole by the electrophilic quinone. Addition of Eu(fod)₃ to the reaction of 2-acetyl-1,4-naphthoquinone 7 and 3-acetyl-5-methoxy-1,4-naphthoquinone 8 with N-(tert-butoxycarbonyl)-2-tert-butyldimethylsilyloxypyrrole 3 provided a method for obtaining the pyrrolidinonaphthofuran adducts 14 and 15 together with silyloxypyrroles 12 and 13. Oxidative rearrangement of pyrrolidinonaphthofuran adduct 15 to pyrrolidino pyranonaphthoquinone 16 using ceric ammonium nitrate in acetonitrile provided a novel approach for the synthesis of an aza-analogue of the pyranonaphthoquinone antibiotic kalafungin.     

Enantioselective synthesis of (1S,2S)-1,2-di-tert-butyl and (1R,2R)-1,2-di-(1-adamantyl)ethylenediamines

An enantioselective synthesis of sterically congested 1,2-di-tert-butyl and 1,2-di-(1-adamantyl)ethylenediamines has been developed. Thus, diastereomerically pure trans-1-apocamphanecarbonyl-4,5-dimethoxy-2-imidazolidinones 6 and 7 were successfully prepared by optical resolution of (±)-trans-4,5-dimethoxy-2-imidazolidinone using apocamphanecarbonyl chloride (MAC-Cl) followed by stereospecific and stepwise substitution of the dimethoxyl groups using tert-butyl or 1-adamantyl cuprates to provide (4S,5S)-4,5-di-tert-butyl and (4R,5R)-4,5-di-(1-adamantyl)-2-imidazolidinones 12 and 15, respectively. Furthermore, N-acetyl 4,5-di-tert-butyl and 4,5-di-(1-adamantyl)-2-imidazolidinones 16a,b were enantioselectively deacetylated using a catalytic oxazaborolidine system to provide enantiopure 1-p-tolylsulfonyl-4,5-di-tert-butyl-2-imidazolidinones 12 and 19 and 1-p-tolylsulfonyl-4,5-di-(1-adamantyl)-2-imidazolidinones 18 and 20, respectively. Finally, N-p-tolylsulfonyl-2-imidazolidinones 12 and 15 were treated with 30 equiv of Ba(OH)₂·8H₂O to achieve ring cleavage and to provide (1S,2S)-1,2-di-tert-butylethylenediamine 3 and (1R,2R)-1,2-di-(1-adamantyl)ethylenediamine 4.     

Synthesis of glutamic acid and glutamine peptides possessing a trifluoromethyl ketone group as SARS-CoV 3CL protease inhibitors

Trifluoromethyl-β-amino alcohol 11 [(4S)-tert-butyl 4-amino-6,6,6-trifluoro-5-hydroxyhexanoate] was synthesized in five steps starting from Cbz-l-Glu-OH 5 where the key step involved the introduction of the trifluoromethyl (CF₃) group to oxazolidinone 7, resulting in the formation of silyl ether 8 [(4S,5S)-benzyl 4-(2-(tert-butoxycarbonyl)ethyl)-5-(trifluoromethyl)-5-(trimethylsilyloxy)oxazolidine-3-carboxylate]. Compound 11 was then converted into four tri- and tetra-glutamic acid and glutamine peptides (1-4) possessing a CF₃-ketone group that exhibited inhibitory activity against severe acute respiratory syndrome coronavirus protease (SARS-CoV 3CL^pro).     

Half-sandwich η-benzene Ru(II) complexes of phenolate-based pyridylalkylamine/alkylamine ligands: Synthesis, structure, and stabilization of one-electron oxidized species

Four half-sandwich ruthenium(II) complexes [(η⁶-C₆H₆)Ru(L¹-O)][PF₆] (1), [(η⁶-C₆H₆)Ru(L²-O)][PF₆] (2), [(η⁶-C₆H₆)Ru(L³-O)][PF₆] (3), [(η⁶-C₆H₆)Ru(L⁴-O)][PF₆] (4a), and [(η⁶-C₆H₆)Ru(L⁴-O)][BPh₄] (4b) [L¹-OH, 4-nitro-6-{[(2′-(pyridin-2-yl)ethyl)methylamino]methyl}-phenol; L²-OH, 2,4-di-tert-butyl-6-{[(2′-(pyridin-2-yl)ethyl)methylamino]methyl}-phenol; L³-OH, 2,4-di-tert-butyl-6-{[2′-((pyridin-2-yl)benzylamino)methyl}-phenol; L⁴-OH, 2,4-di-tert-butyl-6-{[(2′-imethylaminoethyl)methylamino]methyl}-phenol (L⁴-OH)], supported by a systematically varied series of tridentate phenolate-based pyridylalkylamine and alkylamine ligands are reported. The molecular structures of 1-3, 4a, and 4b have been elucidated in solution using ¹H NMR spectroscopy and of 1, 3, and 4b in the solid state by X-ray crystallography. Notably, due to coordination by the ligands the Ru center assumes a chiral center and in turn the central amine nitrogen also becomes chiral. The ¹H NMR spectra exhibit only one set of signals, suggesting that the reaction is completely diastereoselective [1: S_Ru,S_N/R_Ru,R_N; 2: R_Ru,R_N/S_Ru,S_N; 3: S_Ru,R_N/R_Ru,S_N; 4b: S_Ru,R_N/R_Ru,S_N]. The crystal packing in 1 and 3 is stabilized by C-H^…O interactions, in 4b no meaningful secondary interactions are observed. From the standpoint of generating phenoxyl radical, as investigated by cyclic voltammetry (CV), complex 1 is redox-inactive in MeCN solution. However, 2, 3, and 4a generate a one-electron oxidized phenoxyl radical coordinated species [2]²⁺, [3]²⁺, and [4a]²⁺, respectively. The radical species are characterized by CV, UV-Vis, and EPR spectroscopy. The stability of the radical species has been determined by measuring the decay constant (UV-Vis spectroscopy).     

Alternative synthesis of cystothiazole A

Palladium-catalyzed methoxycarbonylation of (−)-(2R,3S)-1-tert-butyldimethylsiloxy-3-methyl-2-methoxypenta-4-yne 9 derived from (2R,3S)-epoxy butanoate 5 gave the acetylenic ester 10, which was treated with MeOH in the presence of Bu₃P to afford selectively (Z)-β-methoxy acrylate congener 11 in 86% yield. Treatment of (Z)-11 with 99.8% enrichment of CDCl₃ followed by consecutive desilylation and oxidation afforded the left-half aldehyde (+)-2. The overall yield (10 steps from 5; 23%) of (+)-2 via the present route was improved in comparison to that (10 steps from 5; 10%) of the previously reported route. By applying the modified Julia's coupling method, selectivity (E/Z=14:1) of the (E)-form (cystothiazole A 1) against the (Z)-form was improved in comparison to the Wittig method (E/Z=4:1 to 6.9:1).     

Chiral cyclopentadienyl ruthenium(II) complexes with P,P-ligands derived from (1R,2R)-1,2-diaminocyclohexane: Synthesis,crystal structures and catalytic activity in Diels–Alder reactions

Chiral cyclopentadienyl ruthenium(II) complexes [CpRu(L1–L3)Cl] (5–7) have been prepared by reaction of [CpRu(PPh₃)₂Cl] with chiral P,P-ligands (1R,2R)-1,2-bis(diphenylphosphinamino)cyclohexane (L1), N,N′-[bis-(3,3′-bis-tert-butyl-5,5′-bis-methoxy-1,1′-biphenyl-2,2′-diyl)phosphite]-(1R,2R)-1,2-diaminocyclohexane (L2) and N,N′-[bis-(R)-1,1′-binaphtyl-2,2′-diyl)phosphite]-(1R,2R)-1,2-diaminocyclohexane (L3). The molecular structures of 5 and 6 have been determined by single-crystal X-ray analysis. Studies on catalytic activity of the cations derived from (5–7) by treatment with AgSbF₆, are also reported.     

Synthesis of 3,4,5-trisubstituted indoles via iterative directed lithiation of 1-(triisopropylsilyl)gramines

Directed lithiation of 1-(triisopropylsilyl)gramines 1 with tert-butyllithium followed by reaction with trimethylsilylmethyl azide produced 4-amino-1-(triisopropylsilyl)gramines 7. The N-tert-butoxycarbonyl derivatives 8 were lithiated selectively at C-5 with tert-butyllithium and the lithiated species were reacted with a variety of electrophiles to give 5-functionalized compounds, 9 and 10. A facile method to produce 3,4,5-trisubstituted indoles from readily available gramine derivatives is thereby established.     

Isoprene-catalysed lithiation: deprotection and functionalisation of imidazole derivatives

The isoprene-catalysed lithiation of different 1-substituted imidazoles (1) (such as trityl, allyl, benzyl, vinyl, N,N-dimethylsulfamoyl, para-toluenesulfonyl, tert-butoxycarbonyl, acetyl, trimethylsilyl, tert-butyldimethylsilyl derivatives) leads to the cleavage of the protecting group producing 1H-imidazole. The use of 1-(diethoxymethyl)imidazole (3) in the same lithiation reaction allows the preparation of the corresponding 2-lithio intermediate, which by reacting with different electrophiles leads to 2-functionalised imidazoles 4.     

Hypervalent and binuclear silicon and germanium derivatives from bis-(3,5-di-tert-butyl-2-phenol)-oxamide

The reactions of bis-(3,5-di-tert-butyl-2-phenol)oxamide (1) with Cl₂SiR₂ (Me or Ph) or Cl₂GeR₂ (Me, nBu or Ph) in THF provided binuclear pentacoordinated silicon and germanium compounds: bis-(3,5-di-tert-butyl-2-oxo-phenyl)-oxamido-bis-dimethylsilane (2), bis-(3,5-di-tert-butyl-2-oxo-phenyl)-oxamido-bis-diphenylsilane (3), bis-(3,5-di-tert-butyl-2-oxo-phenyl)-oxamido-bis-dimethylgermane (4), bis-(3,5-di-tert-butyl-2-oxo-phenyl)-oxamido-bis-di-n-butylgermane (5) and bis-(3,5-di-tert-butyl-2-oxo-phenyl)-oxamido-bis-diphenylgermane (6). The mono-nuclear tetracoordinated silicon compounds N-acetyl-bis-(3,5-di-tert-butyl-2-oxo-phenyl)-amide-bis-(dimethylsilane) (8) and N-acetyl-bis-(3,5-di-tert-butyl-2-oxo-phenyl)-amide-bis-(diphenylsilane) (9) were synthesized from N-(3,5-di-tert-butyl-2-phenol)acetamide (7) and Cl₂SiR₂ (R = Me and Ph). Comparison of the ²⁹Si NMR chemical shifts of the penta- (2 and 3) and tetracoordinated (8 and 9) silicon compounds provided information about the intramolecular coordination of the carbonyl group to the silicon atom. Compounds 3 and 6 were characterized by single-crystal X-ray analyses. They have planar hexacyclic structures where the central atoms present distorted tbp geometries with one nitrogen and two carbon atoms in equatorial positions and two oxygen atoms in apical positions.     

First enantioselective synthesis of the novel antiinfective TAN-1057A via its aminomethyl-substituted dihydropyrimidinone heterocycle

Enantiomerically pure N²-Z-N²-MeAsnOH [(S)-14], prepared in 8 steps (23% overall yield) from asparaginic acid, was first subjected to a Hofmann degradation with PhI(OCOCF₃)₂ yielding (S)-N²-Z-N²-methyl-2,3-diaminopropanoic acid [N²-Z-N²-Me-L-A₂pr, (S)-15], and this in turn was protected to give N²-Z-N³-Boc-N²-Me-L-A₂pr [(S)-17]. Condensation of (S)-17 with HNC(SMe)NHCONH₂ followed by removal of the tert-butoxycarbonyl protecting group, cyclization and hydrogenolytic removal of the Z-group gave the heterocycle of TAN-1057A [(S)-1] with an e.e. of 87 in 36% yield [from (S)-14]. Coupling of (S)-1 with (S)-tris-Z-β-homoarginine (20a) in the presence of O-(7-azabenzotriazol-1-yl)-N,N,N′,N′-tetramethyluronium hexafluorophosphate (HATU) and iPr₂NEt in N,N-dimethylacetamide followed by hydrogenolysis afforded the most active A-diastereomer of the natural antibiotic TAN-1057 in 52% yield (from (S)-1 and 20a). Similarly, starting from (S)-1, a single diastereomer of the potent, less toxic TAN-1057A analogue 22b with a β-lysine side chain has been prepared. All described synthetic steps do not require column chromatography for purification of the products.     

Synthetic access to optically active isoflavans by using allylic substitution

A general approach to the (S)- and (R)-isoflavans was invented, and efficiency of the method was demonstrated by the synthesis of (S)-equol ((S)-3), (R)-sativan ((R)-4), and (R)-vestitol ((R)-5). The key step is the allylic substitution of (S)-6a (Ar¹=2,4-(MeO)₂C₆H₃) and (R)-6b (Ar¹=2,4-(BnO)₂C₆H₃) with copper reagents derived from CuBr·Me₂S and Ar²-MgBr (7a, Ar²=4-MeOC₆H₄; 7b, 2,4-(MeO)₂C₆H₃; 7c, 2-MOMO-4-MeOC₆H₃), furnishing anti S_N2′ products (R)-8a and (S)-8b,c with 93-97% chirality transfer in 60-75% yields. The olefinic part of the products was oxidatively cleaved and the Me and Bn groups on the Ar¹ moieties was then removed. Finally, phenol bromide 9a and phenol alcohols 9b,c underwent cyclization with K₂CO₃ and the Mitsunobu reagent to afford (S)-3 and (R)-4 and -5, respectively.     

Rare configuration of tautomeric benzimidazolecarboxylate ligands in cadmium(II) and copper(II) coordination polymers

Two Cd(HBimc)-based isomers, [Cd(HBimc^N)(HBimc^T)(H₂O)]·3.5H₂O·EtOH (1a·3.5H₂O·EtOH, H₂Bimc=1H-benzimidazole-5-carboxylic acid) and [Cd(HBimc^N)(HBimc^T)(H₂O)] (1b), and two Cu(HMBimc)-based coordination polymers, [Cu(HMBimc^N)₂(H₂O)]·1/2H₂O (2·1/2H₂O, H₂MBimc=2-methyl-1H-benzimidazole-5-carboxylic acid) and [Cu(HMBimc^T)₂]·2THF·H₂O (3·2THF·H₂O), were self-assembled from Cd(ClO₄)₂·6H₂O/H₂Bimc and Cu(ClO₄)₂·6H₂O/H₂MBimc systems, respectively. Compound 1a adopts a ladder-like chain structure, comprised of a hydrogen-bond-stabilized Cd₂(HBimc^N)₂-metallocyclic stair and a 1D straight -(Cd-HBimc^T)_n- edge, whereas compound 1b exhibits a 2D (4,4)-rhombus layered structure, intercrossed by 1D -(Cd-HBimc^N)_n- chains and -(Cd-HBimc^T)_n- chains. Compound 2 shows a 1D double-stranded wave-like chain from two single-stranded wave-like -(Cu-HMBimc^N)_n- chains and compound 3 adopts a 2D (4,4)-topological layer structure, intercrossed by subunits of 1D -(Cu-HMBimc^T)_n- chains. Interestingly, a pair of tautomeric HBimc building blocks—normal (N or HBimc^N) and tautomer (T or HBimc^T)—is simultaneously included in the structures of 1a and 1b, whilst the N- and T-configured HMBimc building blocks are present as separate entities in Cu species, 2 and 3, respectively. The existence of only a tautomer (T) mode of the benzimidazolecarboxylate-based ligand in a Cu(II) network is observed for the first time.     

Synthesis of 1-fluoroindan-1-carboxylic acid (FICA) and its properties as a chiral derivatizing agent

1-Fluoroindan-1-carboxylic acid (FICA) (1) was designed and synthesized as its methyl ester (FICA Me ester) (4) in order to develop an efficient chiral derivatizing agent (CDA) which excels α-methoxy-α-(trifluoromethyl)phenylacetic acid (MTPA) in capability. FICA Me ester (4) was prepared by fluorination of methyl 1-hydroxyindan-1-carboxylate (3) with (diethylamino)sulfur trifluoride (DAST) and derived to the esters of racemic secondary alcohols by ester exchange reaction. The resulting Δδ_F value was large in the case of 2-butyl ester of FICA (5a), whereas not detectable in the case of the corresponding MTPA ester (6a). The magnitude of the Δδ_H values was similar to that of MTPA esters. The diastereomers of (R)-(−)-8-phenylmenthyl ester of FICA (5i) was separated and their ¹H NMR analyses revealed that the concept of the modified Mosher's method was successfully applied to 5i.     

[4+2] Cycloaddition of 1-aminodienes and 2-substituted vinylphosphonates: application to asymmetric synthesis of 3-amino-5-phosphono-1-cyclohexene derivatives

N-Butadienylsuccinimide (1), iso-propyl N-butadienyl-(S)-pyroglutamate (5) and N-butadienyl-(R)-4-phenyloxazolidin-2-one (6) reacted with vinylphosphonates, vicinally-substituted (2) by electronwithdrawing groups (CO₂Me, CN, COMe), to furnish [4+2] cycloadducts (3-4,7-10, and 11-14) in moderate to good yields (40-88%). The reactions were highly selective: regioselectivity of 95-100%, endoselectivity of 75-92% and facial selectivity of 80-95%. The major diastereoisomers were fully characterized by ¹H and ¹³C NMR spectroscopy.     

A facile and practical method of preparing optically active α-monosubstituted cycloalkanones by thermodynamically controlled deracemization

Racemic 2-monosubstituted cycloalkanones were converted to R-isomers when TADDOLs (e.g., 1a, b) were used as host molecules in alkaline aqueous MeOH. The efficiency of this thermodynamically controlled deracemization was strongly influenced by the mixture ratio of the solvent, H₂O/MeOH. Based on this finding, an improved method of preparing (R)-2-monosubstituted cycloalkanones with higher optical purity was developed. For example, (R)-2-(4-methylbenzyl)cyclohexanone (5) was obtained in 85% yield with 98% ee, when a 1:1 mixture of H₂O/MeOH was used as the solvent in the presence of 1a.     

Synthesis and redox properties of novel ferrocenes with redox active 2,6-di-tert-butylphenol fragments: The first example of 2,6-di-tert-butylphenoxyl radicals in ferrocene system

Novel Schiff bases of ferrocenecarboxaldehyde bearing 2,6-di-tert-butyphenol fragments N-(3,5-di-tert-butyl-4-hydroxyphenyl)iminomethylferrocene (1) and N-(3,5-di-tert-butyl-4-hydroxybenzyl)iminomethylferrocene (2) have been synthesized and characterized. The oxidation of the compounds 1 and 2 by PbO₂ in solution leads to the formation of stable phenoxyl radicals 1′ and 2′ studied by EPR spectroscopy. The redox properties of ferrocenes 1 and 2 were studied using cyclic voltammetry.     

Coordination behaviour in transition metal complexes of asymmetric NPN ligands

Two bicyclic, chiral aminophosphine ligands, namely 4R, 9R-1,3-bis(pyridin-2-ylmethyl)-2-(2-propyl)octahydro-1H-1,3,2-benzodiazaphosphole (1) and 4R, 9R-1,3-bis(pyridin-2-ylmethyl)-2-(2-ethoxy)octahydro-1H-1,3,2-benzodiazaphosphole (2) have been prepared from 1R, 2R-diaminocyclohexane and the appropriate dichlorophosphine and the nature of their coordination to a number of transition metals explored. Ligand 1 coordinates to Pd(II) and Pt(II) as a terdentate donor to give complexes of the type [M(κ³-N,P,N-1)Cl]⁺ whereas ligand 2 favours bidentate κ²-P,N coordination to give the complexes M(κ²-P,N-2)Cl₂. The study of the coordination chemistry of the NPN ligand 1 is frustrated by its ready decomposition to an unknown species which appears to be promoted by transition metals. The ligand 2 does not undergo such a transformation and its metal chemistry is more readily examined. Aside from the Pt(II) and Pd(II) complexes above, 2 has been coordinated to Cr(0) and Mo(0) in the octahedral complexes M(κ²-P,N-2)(CO)₄ and Au(I) in linear Au(κ¹-P-2)Cl. All the complexes have been fully characterised by spectroscopic and analytical techniques including a single-crystal X-ray structure analysis of [Pt(κ³-N,P,N-1)Cl]Cl, 3.     

The synthesis, N-alkylation and epimerisation study of a phthaloyl derived thiazolidine

The synthesis of the phthaloyl protected thiazolidine, N-phthaloyl-methyl-2(R)-thiazolidine-4(R)-methyl ester, 2, and a study of its susceptibility to epimerise in a range of solvents, using ¹H NMR spectroscopy, are described. Compound 2 was further reacted to yield the thiazole amino acid derivative, 3, and an N-alkylated thiazolidine derivative, 6, as a single diastereoisomer. The N-alkylation of 2, using mild bases, resulted in the formation of a mixture of diastereoisomers of 2 (2R,4R) and (2S,4R). Successful cleavage of the methyl ester and the phthaloyl protecting groups was achieved, giving rise to the formation of the two heterocyclic building blocks, 4 and 5.     

Synthesis and X-ray structures of new chiral Ag(I) complexes with biaryl-based N4-donor ligands

Condensation of (R)-2,2′-diamino-1,1′-binaphthyl or (R)-6,6′-dimethylbiphenyl-2,2′-diamine with 2 equiv of 2-pyridine carboxaldehyde in toluene in the presence of molecular sieves at 70 °C gives (R)-N,N′-bis(pyridin-2-ylmethylene)-1,1′-binaphthyl-2,2′-diimine (1), and (R)-N,N′-bis(pyridin-2-ylmethylene)-6,6′-dimethylbiphenyl-2,2′-diimine (3), respectively, in good yields. Reduction of 1 with an excess of NaBH₄ in a solvent mixture of MeOH and toluene (1:1) at 50 °C gives (R)-N,N′-bis(pyridin-2-ylmethyl)-1,1′-binaphthyl-2,2′-diamine (2) in 95% yield. Rigidity plays an important role in the formation of helicate silver(I) complexes. Treatment of 1, or 3 with 1 equiv of AgNO₃ in mixed solvents of MeOH and CH₂Cl₂ (1:4) gives the chiral, dinuclear double helicate Ag(I) complexes [Ag₂(1)₂][NO₃]₂ (4) and [Ag₂(3)₂][NO₃]₂ · 2H₂O (6), respectively, in good yields. While under the similar reaction conditions, reaction of 2 with 1 equiv of AgNO₃ affords the chiral, mononuclear single helicate Ag(I) complex [Ag(2)][NO₃] (5) in 90% yield. [Ag₂(1)₂][NO₃]₂ (4) can further react with excess AgNO₃ to give [Ag₂(1)₂]₃[NO₃]₂[Ag(CH₃OH)(NO₃)₃]₂ · 2CH₃OH (7) in 75% yield. All compounds have been fully characterized by various spectroscopic techniques and elemental analyses. Compounds 1 and 5-7 have been further subjected to single-crystal X-ray diffraction analyses.     

Structural diversity in Cu(II), Cd(II) and Hg(II) coordination complexes with the rigid N,N′-bis(2/3-aryl)-1,4-benzenedicarboxamide ligand

The syntheses and structures of a series of metal complexes, namely Cu₂Cl₄(L¹)(DMSO)₂·2DMSO (L¹ = N,N′-bis(2-pyridinyl)-1,4-benzenedicarboxamide), 1; {[Cu(L²)_1.5(DMF)₂][ClO₄]₂·3DMF}_∞ (L² = N,N′-bis(3-pyridinyl)-1,4-benzenedicarboxamide), 2; {[Cd(NO₃)₂(L³)]·2DMF}_∞ (L³ = N,N′-bis-(2-pyrimidinyl)-1,4-benzenedicarboxamide), 3; {[HgBr₂(L³)]·H₂O}_∞, 4, and {[Na(L³)₂][Hg₂X₅]·2DMF}_∞ (X = Br, 5; I, 6) are reported. All the complexes have been characterized by elemental analysis, IR spectra and single crystal X-ray diffraction. Complex 1 is dinuclear and the molecules are interlinked through S?S interactions. In 2, the Cu(II) ions are linked through the L² ligands to form 1-D ladder-like chains with 60-membered metallocycles, whereas complexes 3 and 4 form 1-D zigzag chains. In complexes 5 and 6, the Na(I) ions are linked by the L³ ligands to form 2-D layer structures in which the [Hg₂X₅]⁻ anions are in the cavities. The L² ligand acts only as a bridging ligand, while L¹ and L³ show both chelating and bridging bonding modes. The L¹ ligand in 1 adopts a trans-anti conformation and the L² ligand in 2 adopts both the cis-syn and trans-anti conformations, whereas the L³ ligands in 3–6 adopt the trans conformation.