Poly(2-acrylamido glycolic acid-co-acryloyl morpholine) and poly(2-acrylamido glycolic acid-co-acrylamide): Synthesis, characterization, and retention properties for environmentally impacting metal ions

Poly(2-acrylamido glycolic acid-co-acrylamide), P(AGA-co-AAm), and poly(2-acrylamido glycolic acid-co-4-acryloylmorpholine), P(AGA-co-AMo), were synthesized by radical polymerization. The water-soluble polymers containing tertiary amine, amide, hydroxyl, and carboxylic acid groups were investigated as polychelatogen, in view of their metal ion binding properties by using the liquid-phase polymer-based retention technique under different experimental conditions. The retention properties for the following metal ions were investigated: Ag⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Pb²⁺, Al²⁺, Cr³⁺ and Fe³⁺. P(AGA-co-AMo) showed a selective retention for tri-valent cation Al³⁺ at pH 3, but no retention at higher pH. P(AGA-co-AAm) showed the highest metal ion retention capability, specially at pH 5 and pH 7 with values close to 100% to di-valent cations.     

Metal complexes of isonicotinic acid hydrazide

Complexes of platinum(IV), ruthenium(III), rhodium(III), iridium(III), gold(III), dioxouranium(II), zinc(II), cadmium(II), mercury(II) and manganese(II) with isonicotinic acid hydrazide were prepared and characterized on the basis of analytical, conductometric, magnetic susceptibility and spectral data. Platinum(IV) ruthenium(III), rhodium(III), iridium(III), dioxouranium(II) and manganese(II) form six-coordinate complexes while gold(III), zinc(II), cadmium(II) and mercury(II) form four coordinate complexes.     

Electrochemical,spectroscopic, and thermal studies on interactions of linear poly(acrylic acid) with uranyl ions in aqueous solutions

The formation of complexes between linear poly(acrylic acid) (PAA) and uranyl ions in aqueous solutions was studied with conductometry, potentiometry, thermal analysis, Fourier transform infrared, and luminescence spectroscopy methods. The stoichiometry of the PAA/UO complex on repeating units of a PAA basis was determined to be 2:1. IR spectroscopy studies made on solid complexes showed that the carbonyl stretching absorption band of PAA was shifted to a higher wave number, and a new band at 1749 cm^?1 in the polycomplex spectrum was observed, confirming the existence of specific interactions between the carboxylate groups of PAA and metal ions. Luminescence spectroscopy studies showed an increase in the intensity of the uranyl‐ion emission spectra and new band formation at 483 nm, further confirming the interaction of UO ions with PAA in aqueous solutions. The thermal behavior of PAA/UO complexes further proved strong interactions in the complex structure. The thermal degradation of the polycomplexes included the main stages of destruction of both PAA and uranyl nitrate. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1610–1618, 2004     

Enhancing the microdialysis recovery for sampling of Cu and Ni by incorporating humic acid in the perfusion liquid

A strategy to enhance the microdialysis relative recovery for sampling of Cu and Ni ions is presented. Enhanced recovery was achieved by incorporating humic acid, a binding agent, in the microdialysis perfusion liquid during sampling from a Cu and Ni standard solution mixture. All microdialysis sampling experiments were carried out at room temperature under quiescent conditions using a concentric type of microdialysis probe with an adjustable effective dialysis length. For all metal determinations electrothermal atomic absorption spectrometry was employed. Metal recoveries were shown to be dependent on the membrane molecular weight cut-off, perfusion rate, sample solution pH, perfusion liquid composition as well as perfusion liquid pH. Complete recoveries (100%) of Cu and Ni were obtained by microdialysis sampling using a 10 kDa molecular weight cut-off polysulfone membrane at a flow-rate of 2 μl/min employing a 0.05% (w/v) optimal composition of humic acid incorporated in the perfusion liquid. The optimal sampling pH of humic acid was determined to be 6 where most oxygen containing functional groups are dissociated and available for metal binding. These data have important ramifications for sampling and determination of metal ions in small sample solutions (∼10 ml) at very low concentrations in the ppb range.     

A Polarographic Study of Chlorogenic Acid and Its Interaction with Some Heavy Metal Ions

The behavior of chlorogenic acid (CGA) and its interaction with Hg(II), Pb(II), Cu(II), Cd(II) and Zn(II) has been studied using direct current (DC) and differential‐pulse polarography (DPP). Adsorptive and kinetic/catalytic anodic waves of CGA have been detected at ?0.02 and ?0.18 V vs. SCE, respectively; Hg(I)‐CGA surface disproportionation has been assumed. Reduction of Hg(II)‐ions, added in the buffered solution of CGA (pH 7.5), occurs rather than complexation, while the complex forming ability of CGA towards Pb(II) and Cu(II) has been observed. Stoichiometry 1 : 1 for Pb(II)‐CGA, and 1 : 1 and 1 : 2 for Cu(II)‐CGA has been established applying Job’s method of continuous variation on DPP data. UV‐vis spectrophotometric measurements additionally confirmed the existence and stoichiometry of Cu(II) complexes.     

气相条件下金属离子/肽复合物电喷雾串联质谱研究

研究蛋白质与金属离子之间的相互作用的本质一直是生物学家感兴趣的课题。但蛋白结构的复杂性使得二者之间相互作用的研究难度很大,常选用氨基酸或小肽作为模型化合物进行研究^[1-4]。目前该方法的研究甩缺乏系统性。     

Architecture of zero-, one-, two- and three-dimensional structures based on metal ions and pyrazine-2,6-dicarboxylic acid

Six new complexes: [Ln₂(pzda)₃(H₂O)₂] · 2.5H₂O (Ln = Nd, (1); Eu, (2)), [Co(pzda) (bpe)] · 0.125(bpe) · 1.75H₂O (3), [Mn(pzda)(H₂O)_1.5] (4), [Co₂(pzda)₂(bpe)(H₂O)₄] · 0.5(CH₃OH) · H₂O (5) and [Co(pzda)(2,2′-bpy)(H₂O)] · 0.5H₂O (6) (H₂pzda = pyrazine-2,6-dicarboxylic acid, bpe = 1,2-bis(4-pyridyl)ethane, 2,2′-bpy = 2,2′-bipyridine) were obtained from metal salts and H₂pzda under hydro(solvo)thermal conditions. The single crystal X-ray structural analysis reveals that the title complexes have different structures, ranging from zero- to three- dimensions, which are mainly due to the different metal ions, and especially the coordination modes of the pzda ligands. Complexes 1 and 2 have 3D metal-organic frameworks containing a 1D tri-strand array, in which the pzda ligand adopts a pentadentate mode to link lanthanide ions. Complex 3 has a 2D metal-organic framework, in which the pzda ligand acts in a tetradentate mode to connect Co(II) ions into 1D chains, which are further connected by bpe spacers into a 2D framework. While in 4, both of the two carboxylate groups of the pzda ligand adopt μ₂-O bridging modes to link Mn(II) ions into a 1D coordination polymer, which is further assembled into a 2D supramolecular network containing double-stranded hydrogen-bonded helical chains. In both 5 and 6, the pzda ligand binds metal ions as a tridentate ligand (ONO mode) to form zero dimensional structures. Complex 5 is a binuclear molecule, while 6 is a mononuclear complex, which can be attributed to the bridging ligand bpe for 5 and the terminal auxiliary ligand 2,2′-bpy for 6.     

Electrochemical approach to monitoring metal exchange reaction of acetylacetonate complexes with cadmium, copper and zinc ions

Metal exchange reactions of acetylacetonate complexes with Cd(II), Cu(II) and Zn(II) ions were investigated by using cadmium and copper ion selective electrodes. Changes in the electrode potential and pH of the solutions were monitored upon adding the pertinent metal Zn(II) of the acetylacetonate (AA) complexes. In the reverse system in which a stable Cu-AA complex exists in the solution prior to adding a secondary metal ion (Cd(II) or Zn(II)), no Cu(II) was replaced by either ion. In the systems containing Cd(II) and Zn(II) as a complexed form with AA or as free ions, the exchange reactions were not explained by considering the equilibrium stability constants of the Cd-AA and Zn-AA complexes.     

Aluminium ions at polyelectrolyte interfaces. III. Role in polyacrylic acid/aluminium oxide and humic acid/kaolinite aggregate cohesion

Understanding the formation and breakup of humic acids and clays agglomerates is a difficult challenge owing to their complex nature. Thus, to progress in the study of the stability of such systems, attempts were made to replace the humic acid/kaolinite natural system by the polyacrylic acid/aluminium oxide synthetic system. Since the present investigation was dedicated to determine some characteristics of acidic soils which contain traces of aluminium ions, these ions were added to the adsorbent/polyacid systems as trace constituents. Initial and short-term phenomena related to the adsorption of humic and polyacrylic acids on aluminium oxide and kaolinite clay have been presented elsewhere. Here we present long-term phenomena regarding the formation and cohesion of oxide and clay aggregates formed in the presence of polyacrylic and humic acids, respectively. The results of electrophoretic mobility measurements demonstrated the amphipathic character of polymeric layers adsorbed on aluminium oxide and the amphoteric character of humic acid layers adsorbed on kaolinite. The long-term stability of the two colloidal systems was determined to evolve similarly despite the existence of the these typical characteristics. Received: 24 July 2000 Accepted: 20 December 2000     

Metal complexes of anthranilic acid derivatives: A new class of noncompetitive α-glucosidase inhibitors

Metal complexes of anthranilic acid derivatives that constitute a novel class of non-sugar-type aglucosidase inhibitors were synthesized and assessed in vitro for inhibitory activity. All of the Ag(I)complexes(9–16) inhibited a-glucosidase at the nanomolar scale, while 3,5-dichloroanthranilic acid silver(I)(9) was the most potent(IC_(50)= 3.21 nmol/L). Analysis of the kinetics of enzyme inhibition indicated that the mechanism of the newly prepared silver complexes was noncompetitive. The structure-activity relationships were also analyzed, and they are discussed in this report.     

Removal of metal ions from aqueous solution by chelating polymeric microspheres bearing phytic acid derivatives

The aim of this study was to investigate the possibility to synthesize new chelating polymeric microspheres owing immobilized biocompatible agent as chelating functional groups and to evaluate their performance in metal ions removal from aqueous solution.The microparticles were synthesized via precipitation polymerization of 4-O-(4-vinylbenzyl)-myo-inositol 1,3,5-orthoformate with ethylene glycol dimethacrylate (EGDMA) and subsequent exhaustive phosphorylation of myo-inositol groups using phosphoric acid.Spherical geometry with monodisperse nature of the polymeric microparticles was confirmed by scanning electron micrographs (SEM) and dimensional analysis. A large surface area of the microspheres provided a maximum interaction of metal ions and the chelating functional groups on the surface. Absorption capacity of the beads for the selected metal ions, i.e., Cu(II), Ni(II), Fe(III), was investigated in detail in aqueous solution at pH 5.0 utilizing UV/Vis spectroscopy. This study showed that the macromolecular systems are very effective in chelating these metal ions and the affinity order of the microbeads toward metal ions is: Fe(III) > Ni(II) > Cu(II).The chelating beads can be easily regenerated by 1.0 M HNO₃ with high effectiveness. These features make the synthesized beads a potential candidate for metal ions removal at high capacity.     

Nanometer titanium dioxide immobilized on silica gel as sorbent for preconcentration of metal ions prior to their determination by inductively coupled plasma atomic emission spectrometry

Nanometer titanium dioxide immobilized on silica gel (immobilized nanometer TiO₂) was prepared by sol-gel method and characterized by using X-ray diffraction (XRD) and scanning electron microscope (SEM). The adsorptive potential of immobilized nanometer TiO₂ for the preconcentration of trace Cd, Cr, Cu and Mn was assessed in this work. The metal ions studied can be quantitative retained at a pH range of 8-9, and 0.5 mol L⁻¹ HNO₃ was sufficient for complete elution. The adsorption capacity of immobilized nanometer TiO₂ for Cd, Cr, Cu and Mn was found to be 2.93, 2.11, 6.69 and 2.47 mg g⁻¹, respectively. A new method using a microcolumn packed with immobilized nanometer TiO₂ as sorbent has been developed for the preconcentration of trace amounts of Cd, Cr, Cu and Mn prior to their determination by inductively coupled plasma atomic emission spectrometry (ICP-AES). The method has been successfully applied for the determination of trace elements in some environmental samples with satisfactory results.     

Complex formation of polyethyleneimine with copper(II), nickel(II), and cobalt(II) ions

An influence of the structure of a globule of polyethyleneimine on the complex formation of one with the copper(II), nickel(II), and cobalt(II) ions is described. A change of the coordination number from the pH of solution for complexes of ethylenediamine, diethylenetriamine, and polyethyleneimine with metal ions was found. The fraction of monomer links, bound with metal ions, depends on the volume of the globule of macromolecule as well as the condition of the proceeding reaction. The reaction of complex formation is controlled by the diffusion of metal ions into the polymer globule in solution. The effective equilibrium constants of complex formation were found. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 914–922, 2002; DOI 10.1002/pola.10157     

Nickel,copper and zinc complexes of (2-methoxycarbonylmethylimino-5-methyl-thiazol-3-yl)-acetic acid

An ester of an imine containing dicarboxylic acid (2-methoxycarbonylmethylimino-5-methyl-thiazol-3-yl)-acetic acid methyl ester was prepared by the reaction of methylbromoacetate with 5-methyl-thiazol-2-ylamine. Base hydrolysis of this ester with sodium hydroxide gives the corresponding disodium salt of the diacid. The disodium salt of (2-methoxycarbonylmethylimino-5-methyl-thiazol-3-yl)-acetic acid (Na₂L) forms a mononuclear hexacoordinated complex [Ni(L)(H₂O)₃]2H₂O] with nickel, whereas it forms a pentacoordinated coordination polymer with zinc, having the composition {[Zn(L)(H₂O)₂]4H₂O}_n. A copper complex containing L and pyridine (py), with the composition [CuL(py)(H₂O)₂], has also been synthesized and characterized.     

离子色谱-直接电导法测定碱土金属和过渡金属离子

本文报道离子色谱-直接电导法测定碱土金属和过渡金属离子。研究了流动相pH值、乙二胺浓度及柠檬酸和酒石酸浓度对金属离子分离的影响。结果表明,以乙二胺-柠檬酸为流动相可以同时分离碱土金属和过渡金属离子。用乙二胺-酒石酸作为流动相可以分离碱土金属离子。方法检出限为0.09~1.88 mg/L,加标回收率为97.6%~98.7%。该方法用于叶面肥试样的分析,结果良好。     

Isotachophoretic determination of stability constants of Ho and Y complexes with diethylenetriaminepentaacetic acid and 1,4,7,10-tetraazadodecane-N,N′,N″,N-tetraacetic acid

The method of capillary isotachophoresis with conductivity detection was applied for the determination of the physico-chemical characteristics (conditional stability constants log β′) of holmium and yttrium complexes with DTPA (diethylenetriaminepentaacetic acid) and DOTA (1,4,7,10-tetraazadodecane-N,N′,N″,N-tetraacetic acid). The log β′ determination is based on the linear relation between the stability constants of lanthanide–DTPA (lanthanide–DOTA) complexes and the reduction of the zone of the complex owing to the bleeding phenomena (liberating free metal ion). The stability constants calculated using this relationship are comparable with the literary data obtained by other methods for both holmium (log β′_Ho–DTPA=21.9, log β′_Ho–DOTA=24.5) and yttrium complexes (log β′_Y–DTPA=21.2, log β′_Y–DOTA=24.4). Capillary isotachophoresis was applied for the determination of the optimum composition of the reaction mixture (metal:ligand ratio) as well.     

TLC separations of some metal ions with aqueous and aqueous-organic solvent systems containing formic acid

Summary The chromatographic behaviour of some metal ions on silica gel thin layers has been studied in aqueous formic acid and mixed aqueous-organic solvent systems containing formic acid. Many analytically important separations of cations have been achieved in varying concentrations of formic acid solution in DMSO, acetone, and methyl ethyl ketone. Semiquantitative determination of nine cations has also been attempted.The most suitable concentration range of acid for reliable and reproducible separations was found to be 0.1M to 1.0M.     

Comparative study of electrostatic binding vs. complexation of Cu2+ ions with water‐soluble polymers containing styrene sulphonic acid and/or maleic acid units or their sodium salt forms

The interaction of Cu²⁺ ions with the homopolymer poly(styrene sulfonic acid) (PSSH), as well as with the copolymers of maleic acid (MAc) with styrene sulfonic acid (SSH) or vinyl acetate (VAc), was investigated in dilute aqueous solution through turbidimetry, potentiometry, viscometry, and spectrophotometry in the visible region. Cu²⁺ ions were introduced either through neutralization with Cu(OH)₂ of the acid form of the (co)polymers (PSSH, P(SSH‐co‐MAc) and P(VAc‐co‐MAc)) or through mixing of the sodium salt form of the (co)polymers (PSSNa, P(SSNa‐co‐MANa) and P(VAc‐co‐MANa)) with CuSO₄. Turbidimetry, potentiometry, and spectrophotometry revealed that the first carboxylic group of MAc or both carboxylate groups of MANa are involved in the complexation with Cu²⁺ ions when neutralization with Cu(OH)₂ or mixing with CuSO₄ are applied, respectively. The increased values of the reduced viscosity observed mainly at the first stages of neutralization of P(VAc‐co‐MAc) with Cu(OH)₂ indicate that interchain polymer‐Cu²⁺ complexation takes possibly place. Finally, the spectrophotometric behavior observed upon neutralization of P(SSH‐co‐MAc) with Cu(OH)₂ or mixing of P(SSNa‐co‐MANa) with CuSO₄ revealed that the strength of counterion binding by the sulfonate groups is, in fact, comparable with the complexation of Cu²⁺ ions with the carboxylate groups of MAc. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1149–1158, 2008     

Performance of a photocatalytic hybrid system coupled with a stainless steel membrane for removal of humic acid

The objective of this study was to evaluate the performance of a photocatalysis/H₂O₂/metal membrane hybrid system in the degradation of humic acid. A metal membrane of nominal pore size 0.5 μm was used in the experiment for separation of TiO₂ particles. Hydrogen peroxide was tested as an oxidant. The efficiency of removal of COD_Cr and color increased rapidly for initial hydrogen peroxide concentrations up to 50 mg L⁻¹. The efficiency of removal of COD_Cr and color by 50 mg L⁻¹ initial hydrogen peroxide concentration was approximately 95 and 98%, respectively. However, addition of hydrogen peroxide over 50 mg L⁻¹ inhibited the efficiency of the system. Addition of hydrogen peroxide to a UV/TiO₂ system enhanced efficiency of removal of COD_Cr and color compared with no addition of hydrogen peroxide. This may be ascribed to capture electrons ejected from TiO₂ and to the production of OH radicals. Application of the metal membrane in the UV/TiO₂/H₂O₂ system enhanced the efficiency of removal of COD_Cr and color because of adsorption by the metal membrane surface and the production of OH radicals. By application of a metal membrane with a nominal pore size of 0.5 μm, TiO₂ particles were effectively separated from the treated water by metal membrane rejection. The photocatalytic metal membrane had much less resistance than the humic acid, TiO₂, and humic acid/TiO₂ because of the degradation of humic acid by the photocatalytic reaction.